Tender For Repair To Motorized Manual Rolling Shutter And Connected Items In Zone 1 2 And 3 At Naval Dockyard Under Ge Nw Kunjali Colaba Mumbai
Tender Value
70 Lakhs
Estimated cost
Bid Submission
25 Mar 2024
0 days left
EMD
1.30 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kunjali → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair To Motorized Manual Rolling Shutter And Connected Items In Zone 1 2 And 3 At Naval Dockyard Under Ge Nw Kunjali Colaba Mumbai
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 18-Mar-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 25-Mar-2024 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down existing mild steel rolling shutters for and including replacing the slates, bottom lock plates, helical springs, side guides, sponge rubber gaskets, hood cover and side bracket etc wherever required and refixing in its original position after repairs including material and labour for greasing and mechanical old and new parts of rolling shutters complete all as per directed for shutters of area n. exc 10 sqm each, complete all as specified and directed. |
| 2 | Ditto all as per Srl Item No.1.00 here in before but area of shutters exc 10 sqm and n.exc 20 sqm each complete all as specified and directed. |
| 3 | Ditto all as per Srl Item No.1.00 here in before but area of shutter exc 20sqmeach complete all as specified and directed.Note:- Any spare parts required for srl item No. 1, 2 & 3 shall be measured and paid for separately |
| 4 | Supply & Fixing in repair factory fabricated mild steel (hardened) helical wire spring of size 300mm long, 80mm dia to match with existing complete all as specified and directed. |
| 5 | Supply & Fixing in repair factory fabricated mild steel (hardened) helical wire spring of size 400mm long, 80mm dia to match with existing complete all as specified and directed. |
| 6 | Supply & Fixing in repairs factory fabricated mild steel (hardened) helical wire spring of size 450mm long, 80mm dia to match with existing complete all as specified and directed. |
| 7 | Supply & Fixing in repairs factory fabricated mild steel (hardened) helical wire spring of size 600mm long, 80mm dia to match with existing complete all as specified and directed. |
| 8 | Supply & Fixing in repairs factory fabricated new guide,side brackets, of rolling shutter made out of mimimum 1.25mm thick mild steel sheet of grade Fe-310 or Fe-410 of required length to match the existing one complete all as specified and directed. |
| 9 | Supply & Fixing in repairs factory fabricated new mild steel slates of 1mm thick of grade Fe-410-0 or Fe-310-0 to match with existing fitted with locking clips, riveted to slates etc complete all as specified and as directed |
| 10 | Supply & Fixing factory fabricated mild steel of grade Fe-410-0 or Fe-310-0,bottom lock plate riveted and welded with and including provision of standard locking arrangement welded to and including mild steel angle iron complete to match with existing complete all as specified and as directed |
| 11 | Supply & Fixing factory fabricated hood cover of mild steel 1mm thick hexagonal, square or circular shape fitted to existing angle iron stiffness at bottom edge and to bracket plate all as directed andcomplete all as specified and directed. |
| 12 | Supply & Fixing in repair mild steel factory made bevel gear box with machine cut gears suitable for rolling shutters as fixed in repairs complete all as specified and directed. |
| 13 | Supply & Fixing in repair mild steel pressed bevalhandles 150mm long, oval type, enamelled black all as specified and as directed. |
| 14 | Supply & Fixing in repairs mild steel safety lever lock with 4 levers for rolling shuttersall as specified and as directed. |
| 15 | Supply & Fixing for greasing and easing in position of mild steel rolling shutters of area n.exc 10sqm each for full movement and for easy operation for shutters complete all as secified and as directed. |
| 16 | Supply & Fixing for greasing and easing in position of mild steel rolling shutters of area exc 10sqm and n.exc 20sqm each for full movement and for easy operation for shutters complete all as specified and as directed. |
| 17 | Material & Labour for greasing and easing in position of mild steel rolling shutters of area exc 20sqmeach for full movement and for easy operation for shutters complete all as secified and as directed.Notefor item no. 15 to 17:- For purpose of measurement and payment EACH TIME of greasing and easing in positionshall be considered. |
| 18 | Material & Labour for preparing new or previously untreated surface of any description over 10cm in width or girth and applying 2 coats of aluminium paint over one coat of aluminium red oxide primer complete all as specified and directed. |
| 19 | Material & Labour for preparing old painted surface of any decription over 10cm in width or girth and applying one coats of aluminium paint complete all as specified and directed |
| 20 | Material & Labour for preparing old painted surface of any description over 10cm in width or girth and applying one coats of Synthetic enamel paint complete all as specified and directed |
| 21 | Extra for wicket door including 4 lever mild steel safety lock lockable from both inside and outside (area of wicket door to be measured) |
| 22 | Dismantling plain or corrugated steel sheeting, any gauge or thickness incl Nainital or similar pattern roof coverings all as specified and directed. |
| 23 | Supply & Fixing pre-painted galvalume aluminium zinc coating GIbased corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, fixed with self tapping screws as specified. |
| 24 | Supply & Fixing pre-painted galvalume aluminium zinc coating GIbased plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, valley gutter, ridge and fixed with crumple joint etc fixed with self tapping screws allas specified and directed. |
| 25 | Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed. |
| 26 | Material & Labour for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed by EIC. |
| 27 | Ditto All as per Item No 26.00 above but MS Plate (Plain or Chequred) complete all as specified and directed by EIC. |
| 28 | Supply & Fixing for rolled mild steel sctions of grade Fe 410-W (Gde-E-250) quality-A as in stairs (framed) including stringers, treads, landing, balusters, hand rails etc, including cleats, brackets etc and similar work all as specified and directed. |
| 29 | Supply & Fixing framed work in doors or gates of angle or other section with gusset plates, rails, braces, etc, of grade Fe 410-W ( Gde E-250 ) quality A complete drill for fixing of steel sheeting or other covering . Doors, etc to be prepared by hanging and sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering , running, rails & guide) and hanging also fastening and fixing complete all as specified and directed. |
| 30 | Material & Labour for preparing new or previously untreated surface of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 31 | Supply & Fixing in repairs collapsible steel gates, top hungs consisting of channel pickets, provided flat bars, top and bottom runners, brass handles etc, as specified, erected in position and securing runners with holdfast and brackets complete all as specified and as directed. |
| 32 | Supply & Fixing in repairs rolling shutter with/without ball bearing, thickness of laths 1.00mm as specified including top cover, anchoring rod, hasp and staple, gear operated type with chain wheel and hand chain and erected in position as directed push pull or manual complete all as specified and as directed. |
| 33 | Material & Labour for Chipping , removing carefullly concrete work by low impact hammer ,breakar without damaging the structure & cleaning and disposal of debries out side the premises etc. complete as directed. Hard concrete should not be removed by force complete all as specified and as directed. |
| 34 | Material & Labour for Clean existing reinforcement with wire/ rotary wire brush, making the surfaces free from loose material dirt etc. complete and applying two coats of alkaline rust converting primer on the rebars, including cleaning the reinforcement, wirebrushing to remove loose rust spalls, wash the rebars with clean water within 3 min and wipe it dry complete all as specified and as directed. |
| 35 | Material & Labour for applying two coats of Epoy based Zinc primer in a span of four hours over the treated rebars and allow to dry for six hours.The application shall be by brush. |
| 36 | Material & Labour for rendering minimum 20mm thick polymer modified mortar in cemet mortar (1:3) with graded quartz sand with additive, 15% by weight of cement in one coat with and including curing as per manufacturer\"s instruction complete all as specified and as directed |
| 37 | Demolition of Stone slabs and tiles/ Interlocking paver blocks of any description or thickness in floors, aprons laid, bedded and pointed in any mortar and removing rubbish off the premises (outside MD land)etc complete all as specified and directed |
| 38 | Material & Labour for machine pressed pre-cast concrete interlocking coloured paver block and shape and size conforming to IS-15658-2006 of 60mm thicknesswith grey cement and pigmentlaid dry over stone dust or sand base and compacted using vibrator complete all as specified and directed. |
| 39 | Demolition of stone/brick masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlar facings dressed stone work and pre cast concrete articles complete all as specified and directed. |
| 40 | Material & Labour brickwork with sub class \"B\" bricks , straight or curved on planexc 6m mean raidus built in cement mortar 1:6 complete all as specified and directed |
| 41 | Demolition of reinforced cement concrete of any description and in any position not other wise spcifically provided for complete all as specified and directed by EIC. |
| 42 | Material and labour for RCC (1:2:4) type B1 using 20mm graded crushed stone aggregate as in slab supported on wall, beams and columns in floors, roofs, landings, balconies, walls deck slabs in shelves and the like including all necessary form work all as specified. |
| 43 | Material & Labour Mild steel TMT bars 10mm dia and over cut to length bend to shape as required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by EIC. |
| 44 | Ditto as per item No 43.00 above but 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders complete all as specified and as directed by the Engr-in-charge. |
| 45 | Material and labourfor preparation and applying one coat of indigo paint on Chequered tiles/Interlocking paver blocks etc. complete all as specified and directed by Engineer -in-charge. |
| 46 | Material & Labour for preparation of old surfaces of any description and applying one coats of acrylic (antifungal) exterior grade paint on Asbestos/Glavalume sheets/mangalore pattern tiles including necessary scaffolding & removing of vegetation etc complete all as specified and directed. |
| 47 | Material & Labour rendering 15mm thick on fair facesof brick work or concrete surfaces in cement mortar 1:6 finished even and smooth (with out using extra cement) including Sagol finish with 3% weight of cement water proofing compound complete all as specified and directed by EIC.. (note : Water proofing compound shall be measured and paid seperately |
| 48 | Supply only integral water proofing compound complete all as specified and directed by EIC. |
| 49 | Cleaning of covered drains of sectional area exc 0.05 sqm but n.exc 0.15 Sqm by using suitable device for removing blockage of line, mud, silt and other debris and removal of obtained spoils outside MD land, including taking precautionary and safety measures etccomplete all as specified and directed by Engineer in Charge. |
| 50 | Ditto all as item No 49.00 above but section area exc 0.24 sqm all as specified and directed by EIC. |
| 51 | Removing excavated/demolised material & debris exc. 1.50 Km but n exc. 15 Km and depositing where directed, in soil complete all as specified and as directed. |
| 52 | Demolition of plain cement concrete of any description and in any position not other wise speifically provided complete all as specified and as directed. |
| 53 | Material and labour for ready mix cement concrete in Pavement/Hard standing (PQC) M-40of flexural strength of 40Kg/Square in field using minimum 400 Kg of cement per cubic metre laid in bays or as directed with and including steel formwork to sides of concrete spread, compacted and finished in a continuous operation etc all as specified and directed. |
| 54 | Material & Labour for PCC 1:2:4 type B2 using (40mm graded stone aggregate) as in foundations, fillings & mass concrete etcall as specified and directed. (Rate inclusive of necessary formwork and suitable arrangements ) |
| 55 | Material & Labour cement concrete type B0, 1:2:4 (12.5mm graded stone aggregate) in floor kerbs of mud stops, rounded or chamfered on edges. |
| 56 | Cleaning and disilting of any type of drain , removing of silt, muds, sludge and other waste material with mannual or mechanical instrumentin trucks cover with tarpaulin to outside of MD land all as per existing rules and regulation etc and matching the existing surface all as specified and directed. |
| 57 | Material & Labour for new or previously untreated surfaces of any description & applying two coats of acrylic (antifungal) exterior grade paint of over one coat of primer on wall/roof at any height including scafolding complete all as specified and directed |
| 58 | Material & Labour forpreparingnewplasteredsurfacesof walls and applyingtwo coatsofoil bound distemper over a coat of chalk whitening on plastered surfaces at any height including scaffolding complete all as specified and directed. |
AI Tender Summary
Tender Timeline
Mar 18, 2024
11:30 IST
Tender Published
Tender notice published.
Completed
Mar 25, 2024
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedMar 25, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 27, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender