Military Engineer Services-MES has published Tender For Provision Of Shed, False Ceiling, Aluminum Partition, Garbage Bin, Exhaust Fan, Lighting Protection And Certain Other Sanctioned Work Under Ge (East) Jrc. Submission Date for this Tender is 16-03-2024. Ceiling Fan Tenders in jalandhar Punjab. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 09-Mar-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 16-03-2024 |
| Sl. No. | Item Description |
| 1 | Demolition brick work built in cement mortar including all quoins, arches, pillars, etc. of any description incluidng precast cement concrete, complete all as specified and as directed. |
| 2 | Material and labour for brick work with old size sub class "B" bricks, straight or curved on plan exceeding 6m mean radius and built in cement mortar (1:6) complete all as specified and directed. |
| 3 | Material and labour for brick work with old size sub class "B" bricks, straight or curved on plan exceeding 6m mean radius and built in cement mortar (1:4) complete all as specified and directed. |
| 4 | Taking down cement plaster of any description on brick/ stone wall including racking out joints hacking for key, scrubbing down with water etc. complete all as specified and directed. |
| 5 | Material and labour for 15mm thick rendering in cement mortar (1:4) on fair faces of brick wall or concrete surfaces and finishing the surface even and smooth without using extra cement complete all as specified and directed. |
| 6 | Material and labour for preparation of newly plastered surface of wall and applying two coats of cement base paint over a coat of alkali resistant primer, complete all as specified and directed. |
| 7 | Material and labour for preparation of old decorated surfaces of walls including cornicespilasters etc (plastered or unplastered surfaces) ,washing rubbing down and stopping of distempered and applying one coat of cement base paint complete all as specified. |
| 8 | Supply and fixing floor door stopper (double) of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor overall length of cover plate 140/ 150mm complete all as specified. |
| 9 | Supply and fixing aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed. |
| 10 | Material and labour for preparation of new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 11 | Supply and fixing aluminium anodised barrel tower bolts of extruded section 150mm long fixed with machine screws, complete all as specified and directed. |
| 12 | Material and labour for 5.5mm thick Sheet glass, ordinary quality for aluminium door/window/frame in squareexc 0.5 sq. m in each pane all as specified and directed. |
| 13 | Dismantling floor, hearth or wall tiling/ china mosaic including cement mortar bedding (but not backing), removing rubbish off outsideMD land complete all as specified and directed. |
| 14 | Material and labour for non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exc 0.06 Sqm but not exceeding 0.11 Sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed. |
| 15 | Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed. |
| 16 | Excavation in trenches in soft /loose soil, not exceeding 1.5 m wide and not exceeding 1.5m in depth for foundations etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n. exc. 10 sqm on plan andgetting out complete all as specified and directed. |
| 17 | Excavating in post holes (or similar holes) each n.exc 0.5 cum in soft/ loose soil, getting out, returning, filling in, watering and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm and removing surplus soil to a distance n.exc 50m and making good surfaces complete all as specified and directed. |
| 18 | Returning filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick each layer complete all as specified and directed. |
| 19 | Removing excavated soil to a distance n.exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. |
| 20 | Material and labour for PCC (1:4:8) type D-2 using 40mm graded stone aggregate) as in foundation, filling & mass concrete, sub base to floors etc complete all as specified and directed. |
| 21 | Material and labour for 75mm thick PCC (1:2:4) type B-2 (using 40mm graded stone aggregate) as in sub floors, sub base; concrete surfaces finished fair & even to receive topping floor finish/ layer complete all as specified and directed. |
| 22 | Material and labour for 75mm thick hard core of broken stone of gauge exc 63mm & n.exc 100mm, deposited, spread levelled un layers not exc 15cm thick watered and rolled/rammed (Mechanically) to a true surface complete all as specified and directed. |
| 23 | Material and labour for sand cushion 30mm thick and well ramming including watering as required complete all as specified and directed. |
| 24 | Material and labour for 60mm thick machine pressed precast concrete inter-locking paver blocks any shape and size conforming to IS 15658-2006, M-35 grade, with grey cement andpigment, laid in floor/ path/ hardstandings in any pattern as approved, laid overcomplete all as specified and directed. Note :- The sample shall be got approved from the GE before build procurement and lots shall be got tested independently by the GE. |
| 25 | Material and labour for PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands plinth courses, roof kerbs or mud stops, benching, coping, bed plates, parapets, water through and the like etc including weathering, slightly rounded or chamfered angles throating, edges of interlocking/ chequered tiles etc complete all as specified and directed. |
| 26 | Material and labour PCC (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) as in foundation filling, post holes, mass concrete, surface channels, drains and other similar works complete all as specified and directed. |
| 27 | Supply and fixing Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates etc confirming to Gde Fe-410-W (Gde -E-250) quality "A" complete all as specified and directed. |
| 28 | Material and labour for Cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed. |
| 29 | Supply and fixing pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self-tapping screwsall as specified and as directed. |
| 30 | Supply and fixing pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self-tapping screws complete all as specified and directed. |
| 31 | Material and labour for cutting grooves in brick wall 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar (1:3) complete all as specified and directed. |
| 32 | Supply and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge |
| 33 | Supply and fixing pre-laminated interior grade both side laminated of 9mm thick and fixing at site on aluminium frame complete all as specified and directed. |
| 34 | Material and labour for aluminium mortice lock, vertical type, size 100mm 4 lever Brass body, complete all as specified and directed. |
| 35 | Supply and fixing aluminium (extruded section body) door closer hydraulically of aluminium extruded section bodyregulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixedcomplete all as specified. |
| 36 | Supply and fixing aluminium handle cast type anodised 125mm long complete all as specified and directed. |
| 37 | Supply and fixing 300mm long aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified and directed. |
| 38 | Supply and fixing anodized aluminium snap grid of size 605 X 605 mm framework for false ceiling including necessary GI wire hangers 6 mm dia for securing frame work to ceiling , and also including necessary notching and prepared holes complete all as specified and directed. |
| 39 | Supply and fixing 12 mm thick perforated particle board / tiles for insulation and acoustic purpose, 60 X 60 cm size fixed with staples on snap grid as in ceiling complete all as specified and directed. |
| 40 | Material and labour for point wiring with 1.5 sqmm (nominal area), 1100 volt grade PVC insulated FRLS type multi stranded copper conductor cable drawn in and including concealed rigid PVC conduit medium grade (ISI marked) not less than 20mm dia with accessories including cutting chases for laying of conduit/ fixing of boxes in walls/ floors etc including making good to disturbed surfaces as per adjoining specification and terminated in concealed terminal boxes including MS concealed terminal boxes with plastic laminated bakelite sheet top cover 3mm thick make hylum or equivalent fixed with nickel polished screws with washers and earth continuity PVC insulated FRLS type cable with stranded copper conductor of size 1.5 sqmm (nominal area) green colour as earth wire connected with earth dolly for one light/ fan point controlled by one switch complete all as specified and as directed. |
| 41 | Supply and fixing switch piano flush type, 5/6 Amps, 240 Volt AC single pole, one way complete all as specified. |
| 42 | Supply and fixing ceiling rose surface type PVC/ polycarbonate 65mm x 50mm three terminal complete all as specified. |
| 43 | Material and labour for aluminium single pointed air termination, single pointed aluminium rod 12mm dia fixed witn fixing arrangement such as MS flat iron isolating materilas like ceramic insulator and minimum height of air terminal at the bottom not less than 300mm long from the roof/ pole complete all as specified and directed. |
| 44 | Material and labour for brick work of size 30cm x 30cm x 30cm with sub class ‘B’ old size bricks in cement mortar 1:4 including 15mm thick cement plaster in cement mortar 1:4 on fair faces of brick and two coats of white wash on exposed surfaces complete all as specified and directed. |
| 45 | Material and labour for test check point terminal block made of gun metal or phosphorous bronze size 75 x 75 x 25mm drilled and screwed including 3 Nos 8mm dia 25mm long hexagonal head screws complete all as specified and directed. |
| 46 | Material and labour for aluminium strip 25 x 3.15mm complete with saddles, screws and wooden rectangular block of size 25 x 25 x 40mm for fixing as loop conductor etc complete all as specified and directed Note :- The single support system (DMC/ Porcelain) should not be apart more than 1.2m for horizontal strip and 1m for vertical strip. |
| 47 | Material and labour for GI strip 32 x 6mm buried directly in ground in earth pit or otherwise above ground level complete all as specified and directed. |
| 48 | Earthing complete in replacement with galvanised steel earth plate electrode 60cm x 60cm x 6.0m thick buried directly in ground (each pit not less than 2.25 metres deep below normal ground level) with the top edge of electrode not less than 1.5 metres below normal ground level connected to galvanised iron strip 32 x 6mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron and including GI protection pipe of light grade 40mm dia upto 7.5 mtrs upto test point and aluminium strip 25 x 3.15mm from test point to equipment and watering pipe 20mm bore of GI medium grade with funnel and wiremesh, earth plate covered on all sides with min 150mm thick alternate layers of charcoal, salt all as shown in electrical plate No. 3 of SSR Part-I 2009 connected to earthing point with PCC chamber and RCC cover in (1:2:4) complete with any type of earth work involved all as specified and directed and testing on completion. Notes:- (i) If result is not achieved satisfactory, contractor will have to do re-earthing at his own cost. Nothing shall be paid extra on this account. (ii) PCC chamber shall be constructed at least 0.50 mtr away from on the earth pit electrode and pipe for watering shall be provided in slanting manner. |
| 49 | Supply and fixing galvanised pipe light grade of ISI marked 20mm bore for cable protection under road/ floor/ wall along the pole including fiting complete all as specified and directed. |
| 50 | Supply & fixing exhaust fan, 300mm sweep, 900 rpm, single phase, 230 volt, heavy duty, with lowered shutter including provision of three core flexible cable of required length of size 23/.0076 from ceiling rose/ connector to fan terminal,fixing the fan on wall with suitable size of nut, bolt & washer, including making the hole in wall incl necessary civil/ plastering work to match the disturbed surface complete all as specified and directed by Engineer-in-Charge. |
| 51 | Material and labour for cutting holes for exhaust fan of size 300mm dia sweep in brick walls built in cement mortar and stone walls built inline mortar for inserting holdfasts and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) type B-1 as required, complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
