Agra Municipal Corporation has published Tender For Repair And Railing Work In Men And Women Toilet In Lohamandi Zone, Room No. 7 Khataina.. Submission Date for this Tender is 26-02-2024. Toilet Bathroom Tenders in agra Uttar Pradesh. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Cleaning of the site for warkable etc. All complete. (Non Scheduled) |
2 | Dismantling existing plaster including disposal of refuse as directed by E/IC with in a distance of 60 meters (200 feet). (SI No. 706) |
3 | Class-150 (Non Modular) brick work Super Structure in 1:4 cement and Coarse sand mortar in foundation and plinth including supply of all material, labor T&P etc. required for proper completion of work. (S.No. 6.1.1) |
4 | 12mm thick cement plaster in single coat of fair side of single of half brick wall forinterior plastering up to floor two level including internal rounded angles chamfers and rounded angles not excluding 80mm in girth and finished even and smooth. No extra for mixing any additive. (c) 1 cement : 4 Coarse sand. (Chapter No. 13 S.I. No.-582(ii)) |
5 | Providing and laying cement concrete in 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) and curing complete, including cost of form work in foundation and floors. (DSR SN-4.1.10) |
6 | Providing and laying Vitrified tiles in floor without lean concrete of 500x500mm sizes (thickness 10mm), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in desired colours and shades, laidwith cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, including grouting of joints, |
7 | Mild Steel or iron in Heavy Size such as reinforced concrete or reinforced brick work (When not included in and an overall rates) brought to required shape as necessary including bending for proper completion of the work and including supply of steel, its wastage bend hooks and authorized over lapping shall be measured up to floor two level. (10 mm to 12mm tor (TMT Bars). |
8 | Supply & fixing of flush doors, commercial quality conforming of I.S. 2202 part 1 (1983) including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges, bolts, locks, handles, springs, fitting with necessary screws to be supplies deparmentally. (a) 32mm thick. {Chapter No.09 S.I.No. 470(a)} |
9 | Supply and Fixing Oxided Iron Fitting etc. all complete (None Scheduled) |
10 | Providing and fixing of door & ventilater etc. all complete. (DSR No. 9.6.1) |
11 | Finishing wall Putty Aproved brand and manufacture and of required shade and undecorated wall surface to give and even shade over and including curing and cost of all material. (15-Chapter Si.No.27 New) |
12 | Finishing wall withTextured exterior emulsion paint (Apex) approved brand and manufacture and of requires shade on undacorted wall surface to give even shade over @ 1.25 Ltr. per 10sqm including one coat of primer applid @ 0.75 Ltr per 10 Sqm coat curing and cost of all material. labour etc. required for proper completion of work. for two coat. |
13 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm Sand Cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the wall and floors wherever required : White Vitreous China Orissa pattern W.C. pan of size 580x440 mm with with integral type foot rests. (Chapter No.24 SI. No.1) |
14 | Providing and fixing White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps. (Chapter No.24 Si.No.3A) |
15 | Supply and fixing Pvc. sintex water tank etc. All complete. (19-Chapter Sr.No.2) |
16 | Providing and Fixing PVC pipe conforming to ISI make working pressure 6 kg/Cm including testing labour T&P etc. all complete. 110mm diameter. (Chapter No.23 SI.No. 32(iii)) |
17 | Providing and Fixing PVC pipe conforming to ISI make working pressure 6 kg/Cm including testing labour T&P etc. all complete. 140mm diameter. (Chapter No.23 SI.No. 32(iv)) |
18 | Providing and Fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & Cold Water Supply, including all CPVC Plain & brass threaded fittings I/c fixing the pipe with clamps at 1.00 m spacing, This includes Jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints, complete as per direction of Engineer-in-Charge. Concealed work, of including cutting chases and making good the wall etc. (d) 32 mm nominal outer dia pipes.(Chapter No.23 SI.No.8D) |
19 | Providing and Fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & Cold Water Supply, including all CPVC Plain & brass threaded fittings I/c fixing the pipe with clamps at 1.00 m spacing, This includes Jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints, complete as per direction of Engineer-in-Charge. Concealed work, of including cutting chases and making good the wall etc. (d) 25mm nominal outer dia pipes.(Chapter No.23 SI.No.8C) |
20 | Supply & Fixing of brass Bib Cock of approve quality etc. all complete. (Chapter No.21 Si.No.43) |
21 | Supply & Fixing of C.P. brass Stop Cock (Conceled) of Standerd design of approve quality etc. all complete. (Chapter No.21 Si.No.44) |
22 | Supply and Fixing of Light Fitting Switch Board. (None Sheduled) |
23 | Supply and Fixing Wiring of Light Point. (None Sheduled) |
24 | S/L/J of 20mm dia PVC Cunduct Pipe etc. all complete. |
25 | Supply & Fixing of wiring Sub Main. |
26 | Supply & Fixing of Plug Power Point 15mm. |
27 | Supply & Fixing of 27watt. CFL etc. all complete. |
28 | Repairing of Submersible pump ISI marked (1.50HP) etc.all complete. |
29 | Making connection of drain of sewer line with existing man hole including breaking into and making good the walls, floors with cement concrete 1:2:4 cement plastered on both side with cement mortar 1:3 finished with a floating coat of neat cement and making necessary channels with cement concrete 1:2:4 for the drain etc. all complete. (Chapter No.25 Si.No.9) |
30 | Constructingbrick masonary chamber for underground C.I. inspection chamber and bends with bricks in cementmortar 1:4 (1 Cement : 4 Coarse Sand) C.I. cover with frame (light duty) 455x610mm Internal dimensions, total weight of cover with frame to be not less than 38kg (weight of cover 23kg and weight of frame 15kg), R.C.C. top slat with 1:2:4 mix (1 Cement : 2 Coarse Sand : 4 graded stone aggregate 20mm nominal size), foundation concrete 1 :5:10 (1 Cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size), inside plastering 12mm thick with cement mortal 1:3 (1 Cement : 3 Coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard desing: (a) Inside dimensions 455x610mm and 45cm deep for single pipe line : With Common burnt clay F.P.S. (non modular) bricks of class designation M-150). {Chapter No.25 Si.No.7a) |
31 | 6mm thick plastering on ceilings and soffits of stairs upto floor two level instead of plastering in wall. (V) 1 cement : 3 fine sand (Chapter No.13 Si.No.4) |
32 | Supply/Fixing 6mm (1/4”) thick china white glazed tiles in flooring or dado laid with 1:3 cement and approved coarse sand mortar and approved coarse sand mortar finished with white cement jointed and polishing complete including supply of all materials, labor for proper completion of the work. (SI No. 628) |
33 | Painting Two coats Over Priming coat (but excluding cost of priming coat) on New wood surfaces and other metal surfaces upto 10cm. Width or girth or small articles not exceeding 0.10 Sq.M. in Area with superior synthetic enamel such as Luxol 3, Hi gloss Apcolite, Superiac, Dulux specified brushing to give and even shade and including the cleaning the surface of all dirt, dust and other foreign matter sand papering and scrapping including cost of all materials, labour, tools and plants etc. required for proper completion of work. (Chapter No. 15 S.I. No.1(b)+2(b) new+642) |
34 | Lettering & Painting of wall etc. all complete. |
35 | Sub Total |
36 | Add/Deduction Rs. For Estimate Figure Amount Match |
37 | Grand Total |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail