Bhabha Atomic Research Centre-BARC has published Tender For Providing Furniture And Few Internal Finishing Works For General Services Building (Gsb) At Barc Main Campus At Atchutapuram, Near Visakhapatnam, A.P. Submission Date for this Tender is 15-03-2024. Civil Work Tenders in atchutapuram Andhra Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | All Furniture work should be in Plywood confirming to IS: 710-2010, BWP MARINE GRADE, Premium quality from suggested brands for plywood/WPC/Laminates/1st Class TW Veneer: Greenply, Century, Kitply, Austin plywood, Everest ply, Indian Plywood Mfg. Ltd. (Anchor) or equivalent. All hardware items like drawer channels, handles, SS hinges, SS Beading etc shall be from Godrej, Olive, Hitachi, Kich, Hilti or as Approved by Architect. Drawer locks shall be from Godrej, Dorset, Hilti, Hardwyn. SS Handles, SS Legs shall be from approved / suggested brands. Adhesive shall be from Fevicol, Jivanjor, Vamicol, Dunlop, Araldite of marine quality. Appropriate other adhesives for WPC & Ply bonding, TW beading with ply wood shall be adopted. All work to complete as per design and instructions by Architect / Engineer-In Charge. All visible surfaces shall be finished with 1.0 mm thick laminates or 4 mm thick TW Veneers wherever specified as per the item description and inside surfaces shall be using 1.0 mm or 0.80 mm thick (wherever specified) laminates of approved texture, shade & finish. Shop drawings for each item shall be submitted by the Contractor for approval of the Architect prior to execution. Shop drawings shall be prepared based on the tentative drawings/line diagrams and instructions given by Architect etc.. MTC shall be submitted for all materials like plywood, veneer, aluminium, laminates & WPC sheets etc. All hardware items shall be got approved by the Architect/Engineer-in-charge before using the same. |
| 2 | Contractor shall submit relevant product catalogues and data sheets. The supplier have to provide architectural services towards designing/drawing/layout for modular workstations free of cost Final colour scheme and upholstery of fabric colour will be approved by BARC at the time of procurement. Contractor to furnish various colour schemes available with them. The laminates / veneers having single piece areas larger than 8 S.ft shall preferably be machine pressed |
| 3 | Providing "M1 Type Desk" having main desk of size: 2400*1050*750 mm including a side desk of size: 1500*550*750 mm as per the design on site in 19 mm thk. BWP/AA Grade Marine plywood (as per IS 710-2010) frame work of suggested brands with 4 mm thk 1st Class Teak Wood veneer on table top & all exposed areas & 1.0 mm thick laminate for inner surfaces of approved texture, shade and finish and edges to be finished in matching 6 mm thick 1st Class TW beading and ploished with suitable wood polish (melamine polish); alongwith supply & providing 12 mm thk. toughned glass with rounded edges & required holes/openings on both table tops. Suitable steel legs / SS studs and SS Beading as approved shall be provided for the desk. Double ply shall be used for edging to the tables to make it 38 mm thickness alround. 1 no. Shelf for CPU to be provided below the side desk. All the inner surfaces shall be finshed with 1.0 mm thick white laminate. 1no. Computer key board tray as per architects design using 19 mm thk BWP Marine ply base fixed with telescopic/double(Suggested make) sliders. 2 Nos. of pedestals of size: 450*450*650 mm having 3 nos of drawers shall be provided with 1.0 mm. thk. matching laminate; under the side desk. Height of drawers shall be as per the Architects drawing. Drawer shall consist of 19/12mm thk. BWP Marine Ply sides, back and 12 mm thk. BWP Ply base. Facia of drawers shall be of 19 mm thk. BWP Ply finished in 1.0 mm. Thk. Laminate (matching with TW Veneer shade) and with a wooden moulding on top/bottom edge for handle. Each drawer shall slide on a pair of telescopic drawer sliders(Suggested make). The inside portion of draws to be finished with white laminate. Wire Management: Multi-functional wire box (Metal access flap) on desk top with power, VGA, network and phone sockets, micro-fiber leather writing pad shall be provided. Vertical Wire entry cover is considered to run through floor to raceway. Rate shall be inclusive of all necessary approved fittings like locks(Suggested make) for drawers, FGV Damping hinges,and any miscellaneous hardware items. |
| 4 | Back storage including display unit: A storage unit with display of 2400*500*1800 mm shall be provided behind the desk as per the drawing. It shall consist of 06 nos of storage cabinets with 03 compartments in each storage having one door with suitable SS Handles. The entire unit shall be made of 19 mm thick BWP/AA Grade marine plywood (12 mm ply for wall panelling) with finishing layer of 4 mm thick 1St Class TW Veneer, finished with wood polish for exposed areas as per the drawing. The internal portions of the storage unit shall be finished using 1.0 mm thick suitable colour laminates. All the edges to be finished using 6 mm thick 1st class TW beading. The display unit including storage units wall panelling shall be backed with 12 mm thick BWP ply finished with TW Veneer of 4 mm thickness. The 12 mm thick plywood sheet used for wall panelling of display unit shall be fixed to anodised aluminium (15 microns) frame work of 50.80 *25.40 *0.95 mm size at 600 mm grid (wherever the plywood is coming in contact with wall). |
| 5 | Providing "M2 Type Desk" having main desk of size: 2100*750*750 mm including a side desk of size: 1200*550*750 mm as per the design on site in 19 mm thk. BWP/AA Grade Marine plywood (as per IS 710-2010) frame work of suggested brands with 1 mm thk laminate (Sun mica) on table top & 0.8 mm laminate for inner surfaces of approved shade and finish and edges to be finished in matching 6 mm thick 1st Class TW Beading. Supply and providing 12 mm thk. toughned glass with rounded edges & required holes/openings on both table tops is also included. The desk shall be fixed with suitable SS steel legs or bushes of approved/suggested manufacturer. Double ply shall be used for edging to the table to make it 38 mm thickness alround. 1 no. Shelf for CPU to be provided below the side desk. All the inner surfaces shall be finshed with 0.8 mm thick white laminate. 1no. Computer key board tray as per architects design using 19 mm thk BWP Marine ply base fixed with telescopic/double(Suggested make) sliders. 1 No. of pedestal of size: 450*450*650 mm having 3 nos of drawers shall be provided with 1.0 mm. thk. matching laminate under the side desk. Height of drawers shall be as per the Architects drawing. Drawer shall consist of 19/12mm thk. BWP Marine Ply sides, back and 12 mm thk. BWP Ply base. Facia of drawers shall be of 19 mm thk. BWP Ply finished in 1.0 mm. Thk. Laminate and with a wooden moulding on top/bottom edge for handle. Each drawer shall slide on a pair of telescopic drawer sliders(Suggested make). The inside portion of draws to be finished with white laminate of 0.8 mm thickness. Wire Management: Multi-functional wire box (Metal access flap) on desk top with power, VGA, network and phone sockets, micro-fiber leather writing pad shall be provided. Vertical Wire entry cover is considered to run through floor to raceway. Rate shall be inclusive of all necessary approved fittings like locks(Suggested make) for drawers, FGV Damping hinges,and any miscellaneous hardware items. |
| 6 | Back storage unit: A storage unit of 2400*450*750 mm shall be provided behind the desk as per the drawing. It shall consist of 06 nos of storage cabinets with 03 compartments in each storage having one door with suitable SS Handle. The entire unit shall be made of 19 mm thick BWP/AA Grade plywood and 1 mm thick laminate of approved texture shade and finish and edge finishing with 6 mm thick TW Beading. |
| 7 | Providing "M3 Type Desk" having main desk of size: 1800*750*750 mm including a side desk of size: 1200*550*750 mm as per the design on site in 19 mm thk. BWP/AA Grade Marine plywood (as per IS 710-2010) frame work of suggested brands with 1 mm thk laminate (Sun mica) on table top & 0.8 mm laminate for inner surfaces of approved shade and finish and edges to be finished in matching 6 mm thick TW Beading; including 12 mm thk. toughned glass with rounded edges & required holes/openings on both table tops. The desk shall be fixed with suitable size SS studs/legs. Double ply shall be used for edging to the tables to make it 38 mm thickness alround. 1 no. Shelf for CPU to be provided below the side desk. All the inner surfaces shall be finshed with 0.8 mm thick white laminate. 1no. Computer key board tray as per architects design using 19 mm thk BWP Marine ply base fixed with telescopic/double(Suggested make) sliders. 1 No. of pedestal of size: 450*450*650 mm having 3 nos of drawers shall be provided with 1.0 mm. thk. matching laminate under the side desk. Height of drawers shall be as per the Architects drawing. Drawer shall consist of 19/12mm thk. BWP Marine Ply sides, back and 12 mm thk. BWP Ply base. Facia of drawers shall be of 19 mm thk. BWP Ply finished in 1.0 mm. Thk. Laminate and with a wooden moulding on top/bottom edge for handle. Each drawer shall slide on a pair of telescopic drawer sliders(Suggested make). The inside portion of draws to be finished with white laminate of 0.80 mm thickness. Wire Management: Multi-functional wire box (Metal access flap) on desk top with power, VGA, network and phone sockets shall be provided. Vertical Wire entry cover is considered to run through floor to raceway. Rate shall be inclusive of all necessary approved fittings like locks(Suggested make) for drawers, FGV Damping hinges,and any miscellaneous hardware items. |
| 8 | Back storage unit: A storage unit of 1800*450*750 mm shall be provided behind the desk as per the drawing. It shall consist of 06 nos of storage cabinets with 03 compartments in each storage having one door with suitable SS Handle. The entire unit shall be made of 19 mm thick BWP/AA Grade plywood and 1 mm thick laminate of approved texture, shade and finish and edge finishing with 6 mm thick TW beading. The storage units wall panelling shall be backed with 6 mm thick approved brand WPC sheet (wherever the plywood is coming in contact with wall). |
| 9 | Providing "M4 Type Desk" having main desk of size: 1500*750*750 mm including a side desk of size: 900*450*750 mm as per the design on site in 19 mm thk. BWP/AA Grade Marine plywood (as per IS 710-2010) frame work of suggested brands with 1 mm thk laminate (Sun mica) on table top & 0.8 mm laminate for inner surfaces of approved texture, shade and finish and edges to be finished in matching 6 mm thick 1st class Teak Wood beeding, including 8 mm thk. toughned glass with rounded edges & required holes on both table tops. The desk shall be fixed with suitable size SS studs/bushes. 1 no. Shelf for CPU to be provided below the side desk. All the inner surfaces shall be finshed with 0.8 mm thick white laminate. 1no. Computer key board tray as per architects design using 19 mm thk BWP Marine ply base fixed with telescopic/double(Suggested make) sliders. 1 No. of pedestal (Integral/separate) of size: 450*450*750/650 mm having 3 nos of drawers shall be provided with 1.0 mm. thk. matching laminate under the side desk. Height of drawers shall be as per the Architects drawing. Drawer shall consist of 19/12mm thk. BWP Marine Ply sides, back and 12 mm thk. BWP Ply base. Facia of drawers shall be of 19 mm thk. BWP Ply finished in 1.0 mm. Thk. Laminate and with a wooden moulding on top/bottom edge for handle. Each drawer shall slide on a pair of telescopic drawer sliders(Suggested make). The inside portion of draws to be finished with white laminate. Rate shall be inclusive of all necessary approved fittings like locks(Suggested make) for drawers, FGV Damping hinges,and any miscellaneous hardware items. |
| 10 | Providing "M5 Type - L Shaped Workstation" of size: 1500/1500 W x 600 D x 750*1200 H as per the design on site in 19 mm thk. BWP/AA Grade Marine plywood (as per IS 710-2010) work of suggested brands with 1 mm thk laminate (Sun mica) on table top & 0.8 mm laminate for inner surfaces of approved texture, shade and finish and edges to be finished in matching 6 mm thick TW Beading. Item also includes supply & providing 8 mm thk. toughned glass with rounded edges & required holes on both table tops. The workstation shall be fixed with suitable SS Legs/bushes as approved. Partitions: Supplying and erecting minimum 60 mm thick frame & tile based low height partition of 1200 mm height partition of modular grid system consisting of CRCA Steel framework with frame and tile system.CRCA steel shall be IS: 513 . PARTITION FRAME SPECIFICATION: The horizontal and vertical section for the 60 mm thick framework to be constructed out of CRCA steel sections of minimum 1.2 mm thickness for horizontal members and 1.5 mm thickness for verticals member. The configuration of the partition frame shall be as per manufacturer’s specification. The metal components should be finished with powder coating of 40 - 60 microns in desired colour. The skeleton should include top runners, bottom skirting etc. The exposed ends of the frames are to be finished with 1.2 mm thick aluminum extrusion alloy epoxy powder coated end covers and posts at different junctions. etc. All the metal components such as steel and aluminum are to be pre-treated in 7 tank pre-treatment plant prior to powder coating. |
| 11 | The framework should have snap fitted skirting of minimum of 85-100 mm height made up of 0.8 mm thick CRCA steel. The junctions are neatly rounded off by means of metal caps. Tiles made up of 0.8 mm thick CRCA steel duly powder coated finish. The colour of the powder coated tiles shall be in plain colour. Height adjuster: Heavy-duty glide screws of suitable design with good material shall be provided at the base of the frame at suitable intervals for adjusting the level of the workstation up to +/-10mm to take care of variations in the floor level. All the above tiles should be fitted with snap on with clips. TILES IN LOW HEIGHT PARTITIONS: Steel Powder Coated Tiles : shall be made up of 0.8 mm thick CRCA sheet powder coated with 50 microns thickness Soft Pinup Tiles on single side of partition made of minimum 6 mm thick as per manufacturer’s specifications. Fabric shall be free from weaving defects . The manufacturing of the above shall be as per manufacturer’s specifications at least one in each workstation. Main Partition : Fabric + White Marker Above, Plywood with laminates below Table Top. Raceway : Skirting & Below Table Top. Return Partition : Fabric Above, Plywood with laminates below Table Top. Raceway : Skirting level. 1 no. Shelf for CPU to be provided below the side desk. All the inner surfaces shall be finshed with 0.8 mm thick white laminate. |
| 12 | Computer key board tray as per architects design using 19 mm thk BWP Marine ply base and 25 x 50mm round edged moulding on the front fixed with telescopic/double(Suggested make) sliders. 1 No. of pedestal of size: 450*450*650 mm having 3 nos of drawers shall be provided with 1.0 mm. thk. matching laminate under the side desk. Height of drawers shall be as per the Architects drawing. Drawer shall consist of 19/12mm thk. BWP Marine Ply sides, back and 12 mm thk. BWP Ply base. Facia of drawers shall be of 19 mm thk. BWP Ply finished in 1.0 mm. Thk. Laminate and with a wooden moulding on top/bottom edge for handle. Each drawer shall slide on a pair of telescopic drawer sliders(Suggested make). The inside portion of draws to be finished with white laminate. |
| 13 | The storage unit shall also have suitable sliding arrangement, handle locking facility, etc. Wire management: Entry of wires into the work station partitions shall be possible from the floor. Partition shall have provision of running electrical, data and telephone. The transmission of cables shall be at special beams fixed to the frames, which are fitted with switch board plate on which the high quality switches/sockets shall be fitted. Cables etc. horizontally and vertically along the skirting with provision of clipping arrangement inside the skirting & frame. Provision of electrical and data slots on tiles above and below the work top or on skirting shall be provided by the manufacturer according to the approved sample of electrical and data switch plates provided by engineer in charge. |
| 14 | All hardware like drawer channel should be of Godrej, Olive, Hitachi, Kich, Hilti or Approved by Architect. Drawer locks shall be from Godrej, Dorset, Hilti, Hardwyn. SS Handles, SS Legs shall be from approved / suggested brands. Adhesive shall be from Fevicol, Jivanjor, Vamicol, Dunlop, Araldite of marine quality. Appropriate other adhesives for WPC & Ply bonding, TW Beading with ply wood shall be adopted. All work to complete as per design and instructions by Architect / Engineer-In Charge. All visible surfaces shall be finished with 1.0 mm laminates and inside surfaces shall be using 0.80 mm thick laminates of approved texture, shade & finish. Rate shall be inclusive of all necessary approved fittings like locks(Suggested make) for drawers, FGV Damping hinges,and any miscellaneous hardware items. Work station shall be as per detailed drawing given by Architect / instructions given by Architect etc. complete. MTC shall be submitted for all materials like plywood, laminates, Aluminium sections etc. All hardware items shall be got approved by the Architect/Engineer-in-charge before using the same. |
| 15 | Providing "M6 Type - Linear Workstation" of size: 1500 x 600 D x 750/1200 H as per the design on site in 19 mm thk. BWP/AA Grade Marine plywood (as per IS 710-2010) frame work of suggested brands with 1 mm thk laminate (Sun mica) on table top & 0.8 mm laminate for inner surfaces of approved texture, shade and finish and edges to be finished in matching 6 mm thick 1st class TW beading. including 8 mm thk. toughned glass with rounded edges & required holes on both table tops resting on suitable size SS studs. Specification for the partitions shall be adopted from the above item no.: 6 1 no. Shelf for CPU to be provided below the side desk. All the inner surfaces shall be finshed with 0.8 mm thick white laminate. 1no. Computer key board tray as per architects design using 19 mm thk BWP Marine ply base and 25 x 50mm round edged moulding on the front fixed with telescopic/double(Suggested make) sliders. 1 No. of pedestal of size: 450*450*650 mm having 3 nos of drawers shall be provided with 1.0 mm. thk. matching laminate under the side desk. Height of drawers shall be as per the Architects drawing. Drawer shall consist of 19/12mm thk. BWP Marine Ply sides, back and 12 mm thk. BWP Ply base. Facia of drawers shall be of 19 mm thk. BWP Ply finished in 1.0 mm. Thk. Laminate and with a wooden moulding on top/bottom edge for handle. Each drawer shall slide on a pair of telescopic drawer sliders(Suggested make). The inside portion of draws to be finished with white laminate. Rate shall be inclusive of all necessary approved fittings like locks(Suggested make) for drawers, FGV Damping hinges,and any miscellaneous hardware items. |
| 16 | Providing "M7 Type - Linear Workstation" of size: 1200 x 600 D x 750/1200 H as per the design on site in 19 mm thk. BWP/AA Grade Marine plywood (as per IS 710-2010) frame work of suggested brands with 1 mm thk laminate (Sun mica) on table top & 0.8 mm laminate for inner surfaces of approved texture, shade and finish and edges to be finished in matching 6 mm thick TW Beading, including 8 mm thk. toughned glass with rounded edges & required holes on both table tops resting on suitable size SS studs. Specification for the Partition walls for this workstation shall be adopted from item no: 06, above. 1 no. Shelf for CPU to be provided below the side desk. All the inner surfaces shall be finshed with 0.8 mm thick white laminate. 1no. Computer key board tray as per architects design using 19 mm thk BWP Marine ply base and 25 x 50mm round edged moulding on the front fixed with telescopic/double(Suggested make) sliders. 1 No. of pedestal of size: 450*450*650 mm having 3 nos of drawers shall be provided with 1.0 mm. thk. matching laminate under the side desk. Height of drawers shall be as per the Architects drawing. Drawer shall consist of 19/12mm thk. BWP Marine Ply sides, back and 12 mm thk. BWP Ply base. Facia of drawers shall be of 19 mm thk. BWP Ply finished in 1.0 mm. Thk. Laminate and with a wooden moulding on top/bottom edge for handle. Each drawer shall slide on a pair of telescopic drawer sliders(Suggested make). The inside portion of draws to be finished with white laminate. Rate shall be inclusive of all necessary approved fittings like locks(Suggested make) for drawers, FGV Damping hinges,and any miscellaneous hardware items. |
| 17 | Providing and Supplying of ergonomically designed leatherette upholstered high back revolving chair of "Type: CL-e". The Seat and Back Cushion of the chairs should be pressed on 12 mm hot press moulded ply. The seat cushion of the chair should be made up of 50 mm thick High Density of 45±2 Kg/m3 polyurethane mould and back cushion should be made up of 38 mm thick High Density 33±2 Kg/m3. The polyurethane foam shall be as per manufacturer’s specification. The hardness of foam shall be 20 kg on hampden machine and 25% compression and it should be covered with leatherette as per manufacturer’s shade card. The Gas lift mechanism should be tested as per BIFMA X 05.01.2002 Standards. The tilting mechanism should be synchro-tilt mechanism as per international ergonomics standards for any position locking. The pedestal should be five legged injection moulded in black 30% glass –filled nylon and fitted with 5 nos twin wheel castors. Overall Height of chair should be minimum 1210 mm ( Inclusive of maximum adjustment of gas lift mechanism ) All material should be used of relevant ISI specification. |
| 18 | Points to note: i. Dual tone handles with wood and aluminium for elegant look. ii. Aluminium star base for style and strength. iii. Polyurethane foam to prevent straining of back and shoulder to provide comfortable seating. iv. Anti shock mechanism to be provided for safety of back when lock is released. v. Dimensions (MM) :HB -615 W X 695 D X 1210 H |
| 19 | Providing and Supplying of ergonomically designed leatherette upholstered high back revolving chair of "Type: CL-O". The Seat and Back Cushion of the chairs should be pressed on 12 mm hot press moulded ply. The seat cushion of the chair should be made up of 50 mm thick High Density of 45±2 Kg/m3 polyurethane mould and back cushion should be made up of 38 mm thick High Density 33±2 Kg/m3. The polyurethane foam shall be as per manufacturer’s specification. The hardness of foam shall be 20 kg on hampden machine and 25% compression and it should be covered with leatherette as per manufacturer’s shade card. The Gas lift mechanism should be tested as per BIFMA X 05.01.2002 Standards. The tilting mechanism should be synchro-tilt mechanism as per international ergonomics standards for any position locking. The pedestal should be five legged injection moulded in black 30% glass –filled nylon and fitted with 5 nos twin wheel castors. Overall Height of chair should be minimum 1090 mm ( Inclusive of maximum adjustment of gas lift mechanism ) All material should be used of relevant ISI specification. |
| 20 | Points to note: i. Dual tone handles with wood and aluminium for elegant look. ii. Aluminium star base for style and strength. iii. Polyurethane foam to prevent straining of back and shoulder to provide comfortable seating. iv. Anti shock mechanism to be provided for safety of back when lock is released. v. Dimensions (MM) :HB -615 W X 695 D X 1090 H |
| 21 | Providing and Supplying of ergonomically designed leatherette upholstered mid back chair of "Type: CL-V". The Seat and Back Cushion of the chairs should be pressed on 12 mm hot press moulded ply. The seat cushion of the chair should be made up of 50 mm thick High Density of 45±2 Kg/m3 polyurethane mould and back cushion should be made up of 38 mm thick High Density 33±2 Kg/m3. The polyurethane foam shall be as per manufacturer’s specification. The hardness of foam shall be 20 kg on hampden machine and 25% compression and it should be covered with leatherette as per manufacturer’s shade card. Overall Height of chair should be minimum 975 mmAll material should be used of relevant ISI specification. |
| 22 | Points to be noted: i. Dual tone handles with wood and aluminium for elegant look. ii. Aluminium base for style and strength. iii. Polyurethane foam to prevent straining of back and shoulder to provide comfortable seating. iv. Dimensions (MM) : Visitor Chair- 570 W X 660 D X 975 H |
| 23 | Providing and Supplying of ergonomically designed fabric upholstered high back revolving mesh chair of "Type: CM-O". The Seat and adjustable head rest Cushion of the chairs should be pressed on 12 mm hot press moulded ply. The seat cushion of the chair should be made up of 50 mm thick High Density of 45±2 Kg/m3 polyurethane mould and head rest cushion should be made up of 38 mm thick High Density 33±2 Kg/m3. The polyurethane foam shall be as per manufacturer’s specification. The hardness of foam shall be 20 kg on hampden machine and 25% compression and it should be covered with fabric as per manufacturer’s shade card. The Gas lift mechanism should be tested as per BIFMA X 05.01.2002 Standards. The tilting mechanism should be synchro-tilt mechanism as per international ergonomics standards for any position locking. The pedestal should be five legged injection moulded in black 30% glass –filled nylon and fitted with 5 nos twin wheel castors. Overall Height of chair should be minimum 1050 mm ( Inclusive of maximum adjustment of gas lift mechanism). Dimensions: HB-620 W X 610 D X 1050 H. All material used should be of relevant ISI specification. |
| 24 | Providing and Supplying of ergonomically designed fabric upholstered mid back revolving mesh chair of "Type: CM-M". The Seat Cushion of the chairs should be pressed on 12 mm hot press moulded ply. The seat cushion of the chair should be made up of 50 mm thick High Density of 45±2 Kg/m3 polyurethane mould. The polyurethane foam shall be as per manufacturer’s specification. The hardness of foam shall be 20 kg on hampden machine and 25% compression and it should be covered with fabric as per manufacturer’s shade card. The Gas lift mechanism should be tested as per BIFMA X 05.01.2002 Standards. The tilting mechanism should be synchro-tilt mechanism as per international ergonomics standards for any position locking. The pedestal should be five legged injection moulded in black 30% glass –filled nylon and fitted with 5 nos twin wheel castors. Overall Height of chair should be minimum 1050 mm ( Inclusive of maximum adjustment of gas lift mechanism). Dimensions: HB-580 W X 630 D X 1055 H. All material used should be of relevant ISI specification. |
| 25 | Providing and Supplying of ergonomically designed fabric upholstered mid back fixed base (non-revolving) mesh chair of "Type: CM-S". The Seat Cushion of the chairs should be pressed on 12 mm hot press moulded ply. The seat cushion of the chair should be made up of 50 mm thick High Density of 45±2 Kg/m3 polyurethane mould. The polyurethane foam shall be as per manufacturer’s specification. The hardness of foam shall be 20 kg on hampden machine and 25% compression and it should be covered with fabric as per manufacturer’s shade card. Overall Height of chair should be minimum 975 mm. Dimensions: HB-580 W X 630 D X 975 H. All material used should be of relevant ISI specification. |
| 26 | Providing and Supplying of ergonomically designed fabric upholstered Low back fixed base (non-revolving) mesh chair of "Type: C-V". The Seat Cushion of the chairs should be pressed on 12 mm hot press moulded ply. The seat cushion of the chair should be made up of 50 mm thick High Density of 45±2 Kg/m3 polyurethane mould. The polyurethane foam shall be as per manufacturer’s specification. The hardness of foam shall be 20 kg on hampden machine and 25% compression and it should be covered with fabric as per manufacturer’s shade card. Overall Height of chair should be minimum 975 mm. Dimensions: HB-578 W X 590 D X 830 H. All material used should be of relevant ISI specification. |
| 27 | Providing and fixing metal storage unit of size: 900 Width * 450 Depth* 1800 mm (Storage -S-T) Height as per drawing. The storage shall be provided with 3 nos. of adjustable shelves ( 4 compartments ), which can be adjusted vertically through the cabinet storages. The main body (the carcass & facia) should be rigid knock down construction is made out of Side /back/top Panels, made up of minimum 0.8 mm thick CRCA steel conforming to IS: 513 -2008 Grade to take the maximum load bearing capacity of 75 Kg uniformly distributed per shelf. CRCA steel shall be 40 Micron(minimum) epoxy powder coated finish (Approved shade of the coating by BARC). Preferably, the base may be provided with levelers for adjustment of any unevenness of the floor. The cabinet shall be supplied with locking system. Internal lockers are not required. The two swing doors shall be hinged and should have SS Handle for the active door. All material used should be of relevant ISI specification. The cost includes all material, fabrication, powder coating, all consumables, hardware items, transporation and installation at location complete. |
| 28 | Providing and fixing metal storage unit of size: 1200 Width * 450 Depth* 750 mm Height (Storage : S-S) as per drawing. The storage shall be provided with 2 nos. of drawers mounted on approved quality SS sliders. The drawers should have front moulding for grip to use as handles. The main body (the carcass & facia) should be rigid knock down construction is made out of Side /back/top Panels, made up of minimum 0.8 mm thick CRCA steel conforming to IS: 513 -2008 Grade to take the maximum load bearing capacity of 75 Kg uniformly distributed per shelf. CRCA steel shall be 40 Micron (Minimum) epoxy powder coated finish (Approved shade of the coating by BARC). Preferably, the base may be provided with levelers for adjustment of any unevenness of the floor. The cabinet shall be supplied with locking system for each drawer. All material used should be of relevant ISI specification. The cost includes all material, fabrication, powder coating, all consumables, hardware items, transporation and installation at location complete. |
| 29 | Providing and fixing metal storage unit of size: 600 Width * 450 Depth* 1200 mm Height (Storage: S-V) as per drawing. The storage shall be provided with 3 nos. of drawers mounted on approved quality SS sliders. The drawers should have front moulding for grip to use as handles. The main body (the carcass & facia) should be rigid knock down construction is made out of Side /back/top Panels, made up of minimum 0.8 mm thick CRCA steel conforming to IS: 513 -2008 Grade to take the maximum load bearing capacity of 50 Kg uniformly distributed per shelf. CRCA steel shall be 40 Micron (Minimum) epoxy powder coated finish (Approved shade of the coating by BARC). Preferably, the base may be provided with levelers for adjustment of any unevenness of the floor. The cabinet shall be supplied with locking system for each drawer. All material used should be of relevant ISI specification. The cost includes all material, fabrication, powder coating, all consumables, hardware items, transporation and installation at location complete. |
| 30 | Supplying and providing two seater sofa sets of Type: SOFA-P. The sofa sets shall be completely made up of powder coated internal metal frames. Seat support shall be supplied with good quality webbing and quality injection moulded PU Foam . PU Foam should be thick and soft with variable hardness. PU-Foam shall be covered with leatherette as per manufacturer’s shade card. Two seater sofa shall have overall size of 1500 W x 600D x 800 H mm, Seat Height : 400mm. All material used should be of relevant ISI specification. 1. Armrest Frame: Plywood, Polyurethane foam 2.0 lb/cu.ft., Polyester wadding, Particleboard, Nonwoven polypropylene, Solid wood, Fiberboard 2. Leg: Polypropylene 3. Covered with leatherette as per manufacturer’s shade card. Sofa section: 4. Seat cushion: High-resilience polyurethane foam (cold foam) 2.2 lb/cu.ft., Polyester wadding 5. Back cushion: 30% cut polyurethane foam/ 70% polyester fibers covered with leatherette Measurements: Height including back cushions: 80 cm (31 1/2 ") Width: 150 cm; Depth: 60 cm ; Height under furniture: 4 cm ; Armrest width: 15 cm ; Armrest height: 65 cm |
| 31 | Supplying and providing two seater sofa sets of Type: SOFA - L. The sofa sets shall be completely made up of powder coated internal metal frames. Seat support shall be supplied with good quality webbing and quality injection moulded PU Foam . PU Foam should be thick and soft with variable hardness. PU-Foam finished with fabric as per selected sample.Two seater sofa shall have overall size of 1500 W x 600D x 800 H mm ,Seat Height : 400mm. All material used should be of relevant ISI specification. 1. Armrest Frame: Plywood, Polyurethane foam 2.0 lb/cu.ft., Polyester wadding, Particleboard, Nonwoven polypropylene, Solid wood, Fiberboard 2. Leg: Polypropylene 3. Coated fabric parts: 100 % polyurethane, 75 % polyester, 25 % cotton Sofa section: 4. Seat cushion: High-resilience polyurethane foam (cold foam) 2.2 lb/cu.ft., Polyester wadding 5. Back cushion: 30% cut polyurethane foam/ 70% polyester fibers 6.Coated fabric parts: 100 % polyurethane, 75 % polyester, 25 % cotton Measurements: Height including back cushions: 80 cm (31 1/2 ") Width: 150 cm; Depth: 60 cm ; Height under furniture: 4 cm ; Armrest width: 15 cm ; Armrest height: 65 cm |
| 32 | DISCUSSION ROOM TABLE: (08 Seater) Providing and fixing 08 Seater - Discussion roomTable with the following specifications: Overall dimensions: 2700 L * 1050 W * 750 mm H The table is to be made on site completely as per the supplied drawings. The construction of the main table shall be free standing structure made up of 19 mm thk. BWP/AA Grade Marine plywood (as per IS 710-2010) frame work of suggested brands with 1 mm thk laminate (Sun mica) on table top & 0.8 mm laminate for inner surfaces of approved texture, shade and finish and edges to be finished in matching 6 mm thick 1st class Teak Wood beading including required holes/openings on the table top. Table shall be fixed with suitable SS Studs/bushes from suggested brands. The main table shall be supported on 2 nos. gable ends and a modesty panel. The gable ends shall be constructed out of 19 mm thick BWP Grade plywood finish as per approved shade. Modesty panel shall be made up of 19 mm thick Plywood sheets of BWP Grade. The provision of Wire carrier shall be as per manufacturer specifications. Table shall be prepared on site using all approved materials by BARC. All visible surfaces shall be finished with 1.0 mm laminates and inside surfaces shall be using 0.80 mm thick laminates of approved texture, shade & finish. Note : The seating system design shall be decided by BARC with rectangular, semicircular and quarter circle module ) Wire Management: Box type MS Powder coated Raceways provided below table top for power & data cable management. Vertical Wire entry cover is considered to run through floor to raceways and finished in approved colour powder coating (50 Microns) Rate shall be inclusive of all necessary approved hardware items. Table shall be as per detailed drawing given by Architect / instructions given by Architect etc. complete. MTC shall be submitted for all materials like plywood, laminates & WPC sheets etc. All hardware items shall be got approved by the Architect/Engineer-in-charge before using the same. |
| 33 | SPECIFICATIONS FOR CONFERENCE ROOM TABLE: 20 Seater Providing and fixing 20 Seater - V Shaped CONFERENCE ROOM Table with the following specifications: Overall dimensions: 6500 L * 750 W * 750 H * 2100 mm OW The table is to be made on site completely as per the supplied drawings. The construction of the main table shall be free standing structure made up of 19 mm thk. BWP/AA Grade Marine plywood (as per IS 710-2010) frame work of suggested brands with 1 mm thk laminate (Sun mica) on table top & all exposed areas as approved in shop drawing and 0.8 mm laminate for inner surfaces of approved texture, shade and finish and edges to be finished in matching 6 mm thick TW Beading inluding required holes/openings on the table top, resting on suitable size SS studs. Double ply shall be used for edging to the table tops to make it 38 mm thickness alround. The table connections have to be made in such a way that no gaps should be seen in between the tables. The main table shall be supported on 2 nos. gable ends and a modesty panel. The gable ends shall be constructed out of 19 mm thick BWP Grade plywood finish as per approved shade. Modesty panel shall be made up of 19 mm thick Plywood sheets of BWP Grade. The provision of Wire carrier shall be as per manufacturer specifications. Table shall be prepared on site using all suggested materials by BARC. All visible surfaces shall be finished with 1.0 mm laminates and inside surfaces shall be using 0.80 mm thick laminates of approved texture, shade & finish. Note : The seating system design shall be decided by BARC with rectangular, semicircular and quarter circle module ) Wire Management: Multi-functional wire box (Metal access flap) on desk top with power, VGA, network and phone sockets shall be provided. Vertical Wire entry cover is considered to run through floor to raceway. Rate shall be inclusive of all necessary suggested hardware items. Table shall be as per detailed drawing given by Architect / instructions given by Architect etc. complete. MTC shall be submitted for all materials like plywood, laminates & WPC sheets etc. All hardware items shall be got approved by the Architect/Engineer-in-charge before using the same. |
| 34 | CENTER TABLES (100 X 650x450 mm L*B*H). Providing and making center tables of above mentioned size as per drg. Table top shall consist of 10 mm. Thk. toughned glass with rounded edges with approved quality etching. The base shall be made up of CP Teak wood frame /19 mm thk. marine Ply (IS: 710-2010, BWP) as directed by the Architect. All edges shall be closed with 6 mm thick teak wood beadings. The UV cured stainless steel disc holding the top and under structure to be provided. All exposed faces finished with 4 mm thick teak wood veneer and with natural polish and inner faces shall be with 0.8 mm Thk laminate for ply. The rate includes cost of all materials, labour charges, transportation, electricity, all taxes etc complete. |
| 35 | Providing and making corner table of size: 20"*20"*24" (L*B*H) using 19 mm thick plywood confirming to IS 710-2010, BWP Marine grade. The table should have 3 compartments for keeping items for the purpose. The ply surface shall be finished with 4 mm thick 1st class teak wood veneer and polished with melamine polish complete. The bottom surfaces of the table shall be pasted with 1.00 mm thick laminates of suggested brands and shade using marine grade adhesive. TW Beading of 6 mm thickness/veneer shall be used for all exposed edges. The corner table shall be fixed with suitable SS studs/bushes for the 4 legs. All the exposed veneered/beading surfaces shall be polished using melamine polish. The rate includes cost of all materials, labour charges, transportation, electricity, all taxes etc complete. |
| 36 | Providing and fixing 4 mm thick 1st class teak wood veneered wall panelling over a base made from aluminium frame & plywood sheets and finished with melamine polish according to the design, colour, shades as per the following specifications: i) Aluminium frame work: Providing and fixing anodized aluminium (15 microns) frame work to masonry walls/wooden surfaces using aluminium hollow section of 50.80*25.40 mm size and thickness of 0.95 mm to form a base frame fixed to walls to receive WPC/Plywood sheet over it to the required levels and lines. The extruded built up standard sections of Suggested make conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereever required including cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per drawings and and directions of Engineer-in-charge. ii) Fixing of plywood sheet & TW Veneer: Supply and fixing of 12 mm thick plywood sheet confirming to IS: 710-2010, BWP Grade Marine quality from the suggested reputed brands. The plywood sheets to be fixed to the base frame using C.P. Brass/Stainless steel screws to the line and levels. Providing and fixing decorative Teak Wood veneer of 4 mm thickness, Suggested make, design & colour over the plywood base using suitable adhesive from Fevicol (Marine grade). SS Beading, as per approved pattern shall be fixed for aesthetics. Suitable TW beading/lipping shall be provided for decoration as per the desgin and to seal exposed edges of the panelling. iii) Melamine polishing: Providing Melamine polishing on wood work as per manufacturers instructions, matt or glossy finish as specified including preparation of the surfaces, complete, as per specifications and as directed by the Engineer-in-charge |
| 37 | Providing and laying flooring using Welspun make / equivalent Stone Polymer composite, "Click-N-Lock Floor tiles" of Wel-Lock technology over existing flooring of any type having proper level and strong base, as per the manufacturers specifications complete as detailed below: 1. Type of floor tiles: Welspun Click-N-Lock Tiles 2. Category of design: Aristo collection 3. Finish: Wood 4. Size: 8.86" * 48.03" (or any approved size) 5. Thickness: 5 mm with 1 mm IXPE Cushion backing The flooring shall be laid/fixed completely as per the manufacturers specifications including skirting of 100 mm height, using suitable beading, reducer/T Mouldings etc. to the satisfaction of Engineer In charge. The cost of flooring includes cost of all materials, transportation, labour charges for laying, all taxes, electricity etc complete. |
| 38 | Providing and fixing anodized/powder coated aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z sections and other sections of Suggested make conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereever required including cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per drawings and and directions of Engineer-in-charge including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required filling the gaps using silicon grout sealent etc. (fittings glazing and panelling shall be paid for separately) |
| 39 | Anodised Aluminium sections (anodised transparent or dyed to the required shade according to IS 1868) Minimum anodizing thickness of 15 micron -AC 15) |
| 40 | Powder coated aluminium (Minimum thickness of powder coating shall be 50 microns) |
| 41 | Wall panelling in plywood and laminates on both sides: Providing and fixing 12 mm thick Plywood sheets confirming to IS 710-2010 BWP Marine grade in panelling fixed in aluminium doors, windows, shutters and partition frames on both sides with C.P Brass / Stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in-charge including pasting of 1.0 mm thick decorative laminates (Sunmica) of suggested brands using suitable marine grade adhesive complete on both sides. Any exposed edges of the partition shall be closed using 6 mm thick 1st class Teak Wood beading of suitable size and finally finished using melamine polish complete. The rate of this items includes cost of plywood, laminates, beading, polish, hardware items, other misc. nails, lapping tapes, transportation, electricity, labour charges and taxes etc. complete as per the directions of the Engineer in charge. Unit of "One Square metre" means finished partition with both sides ply & laminates as single area. |
| 42 | Supplying and fixing preminum quality Vertical Blinds made of glass fabrics in width 5" (or 4"), minimum overlapping of 3/4" in fabric. Top aluminium anodized rail of 1.4 mm thickness, 2 inch wide channel with front lamination of same fabric. Runners having stainless steel hooks with built-in shock spring and self aligning slip clutch. End control box composed of double gear system, stainless steel spacers, bottom weight fully plastic covered linked with plastic bead chain. Product manufactured by any of the suggested brands like Touch, M/s Sundrape, Germany or equivalent manufacturer. The blinds of approved colour, fabric and finish with all necessary fixtures and as directed at site by the Engineer-in-charge complete. |
| 43 | Providing and fixing glazing in aluminium doors, window, ventilator shutters and partitions etc with PVC/Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-charge (Cost of snap beading shall be paid in basic item) with clear float glass panes of 6.00 mm thickness |
| 44 | Providing and fixing 19 mm thick plywood sheet confirming to IS 710-2010, BWP, Marine grade from the suggested manufacturers for making of office furniture. 1st class TW Beading of 6 mm thickness of suitable size shall be fixed to the exposed edges of the plywood along with melamine polish. The unit rate includes the cost of miscellaneous hardware, nails, lapping tape, charges for cutting to the shape & size as per the requirements complete.The rate includes cost of all materials, wastage, labour charges, transportation, electricity, all taxes etc complete. |
| 45 | Providing and fixing 12 mm thick plywood sheet confirming to IS 710-2010, BWP, Marine grade from the suggested manufacturers for making of office furniture. 1st class TW Beading of 6 mm thickness of suitable size shall be fixed to the exposed edges of the plywood along with melamine polish. The unit rate includes the cost of miscellaneous hardware, nails, lapping tape, charges for cutting to the shape & size as per the requirements complete.The rate includes cost of all materials, wastage, labour charges, transportation, electricity, all taxes etc complete. |
| 46 | Providing and fixing 1.0 mm thick decorative laminates from the suggested manufacturers for pasting to the already prepared plywood surfaces for making of office furniture using suitable marine garde adhesive from suggested brands. The unit rate also includes the cost of miscellaneous hardware, nails, lapping tape, charges for cutting to the shape & size as per the requirements complete.The rate includes cost of all materials, wastage, labour charges, transportation, electricity, all taxes etc complete. |
| 47 | Providing and fixing 0.8 mm thick decorative laminates from the suggested manufacturers for pasting to the already prepared plywood surfaces for making of office furniture using suitable marine garde adhesive from suggested brands. The unit rate also includes the cost of miscellaneous hardware, nails, lapping tape, charges for cutting to the shape & size as per the requirements complete.The rate includes cost of all materials, wastage, labour charges, transportation, electricity, all taxes etc complete. |
| 48 | Providng and fixing 6 mm thick 1st Class decorative Teak Wood beading of 25 mm wide to the furntures on the exposed edges. The unit rate of this item also includes the cost of melamine polish for the fixed TW beading, miscellaneous hardware etc complete to the satisfaction of the Engineer in charge. |
| 49 | Providng and fixing 6 mm thick 1st Class decorative Teak Wood beading of 50 mm wide to the furntures on the exposed edges. The unit rate of this item also includes the cost of melamine polish for the fixed TW beading, miscellaneous hardware etc complete to the satisfaction of the Engineer in charge. |
| 50 | Providing and fixing in position suspended false ceiling system using 600 x 600 mm mineral fibre reinforced factory applied vinyl painted "ARMSTRONG" ceiling tiles (Armstrong ceiling systems) Tiles having 16/15mm thick, and approvred surface design and edge profile (TEGULAR or equivalent ) placed in a suspended grid of size of 600 x 600mm made of hot-dipped G.I steel sections having an exposed surface capping of pre-finished baked polyester painted coil wherein the main tee of size 24mm x 32mmx shall be suspended at 1200 mm centres along the length of ceiling with 4mm dia G.I wire with necessary level adjusters. The cross tees of size 24 x 27 x 1200 mm shall be inserted in to slots between the main tees at 600mm centres and thereafter in direction vertical to the longer tees, cross tees of size 24 x 25 x 600mm shall be inserted to form a grid size of 600x600mm resting on the perifery walls on wall angles of size 24mm x 24mm including providing necessary openings for light fixtures, diffusers, trap doors etc to be made as per layout drawings and as per directions of Engineer-in-charge. The main tees to be suspended from the ceiling/ soffit with the help of metal dash fastners of 6mm x 50mm, soffit clits of 25mm x 35 x1.60mm and 4mm dia G.I wire with galvanised spring steel levelling clips. the entire grid system shall be designed to bear a distributed load of minimum 15 kg/sq.m (Only Armstrong false ceiling area will be measured for the purpose of payment. Armstrong Acoustic 600x 600 mm False Ceiling- -19 mm thick ULTIMA model |
| 51 | Providing and fixing decorative "Corian top finish to the tables/desks" as per the approved shade, finsh and series (preferably G-Series) from the suggested manufacturers for pasting to the already prepared plywood surfaces for making of office furniture using suitable adhesive from suggested brands. The unit rate also includes the cost of miscellaneous hardware, nails, lapping tape, charges for cutting & finishing to the shape & size as per the requirements complete.The rate includes cost of all materials, wastage, labour charges, transportation, electricity, all taxes etc complete. Suggested brands: Euro Pratik, Apex etc. |
| 52 | 6 mm thickness |
| 53 | 12 mm thickness |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
