|
| 1 | Supplying & testing of 5 HP submersible pump motor set suitable to operate on single phase, 230 Volts, 50 Hz, AC supply complete etc as reqd. (M/s KSB/ Crompton /CRI make) |
| 2 | Supplying & fixing of following size \"B\" class ISI marked G.I. pipe for suction/delivery of submersible pump i/c cutting, welding, connection etc as required. |
| 3 | a) 40 mm dia |
| 4 | Lifting over the existing defective submersible pump along column pipe from existing bore well upto 150 feet by making lifting arrangement by providing tripod & chain pully block & skilled staff, complete with labour T&P etc as required. |
| 5 | Lowering of the existing 5 HP submersible pump along with 50 mm column pipe in the existing bore well upto 180 feet by making lowering arrangement by providing tripod & chain pully block & skilled staff,complete with labour T&P etc as required. |
| 6 | Supplying & fixing of following accessories i/c threading, fixing etc as required. |
| 7 | a) 40 mm dia heavy duty MS flange |
| 8 | b) 40 mm dia rubber packing |
| 9 | c) GI Reducer Socket 50/40 mm |
| 10 | Cleaning of boring using acid and detergent solution for smooth lifting of the jammed faulty subermsible pump etc. as reqd. |
| 11 | P/F 6.00 mm dia steel rope wire with delivery line for holding of pump incl. the cost of U bolts etc as reqd. |
| 12 | Supplying and fixing of Inverter Unit suitable for 1.5 KWp SP System of minimum 48 V / 96V DC Input voltage range (as per battery type) and 230 V AC, Single phase, (+/-) 3% pure sine wave, 50Hz +/- 2.5 Hz, output voltage suitable to generate AC Power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from 0 to 50 degree C . (M/sExide / Luminous or S.S. make) |
| 13 | SITC of 150 Ah12 Volt battery Lead Acid battery for Solar power system complete with connetion,testing etc as reqd. (Make: Exide , Luminious or S.S. make) |
| 14 | Repairing of existing solar system i/c. replacement of faulty wires , junction box etc. and testing of system making necessary arrangement etc. , commissioning as reqd. |
| 15 | S/F 32 amp two pole 240 volt on load changeover switch on existing wall/frame i/c connection,testing etc as reqd.(M/s Havells or ss make) |
| 16 | Supplying & fixing DP Sheet steel enclosure on surface/recess alongwith 25/32A, 240V \"C \"curve DPMCB complete with connection testing,commissioning etc as reqd. |
| 17 | S/Ffollowing rating, 240/415 volts, \"C\" curve, miniature circuit breaker suitable for inductive load/Isolator of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 18 | 40 A DP Isolator |
| 19 | SolarPhotovoltaicModuleofcapacity330Wpindigenousmakeprefered, conforming to IS 14286 (Part 1):2019, IEC 61215-1:2021, IS/IEC 61730-1 (2004), IS/IEC 61730- 2(2004).SolarPhotovoltaicModuleconversionefficiencyshallnotbelessthan21%.PV modulesusedinsolar powerplants/systems |