Public Health Engineering Department-PHED has published Tender For (Nit 65) Operation And Maintenance Of Fcp Vijainagar And Tarakhera Pumping Station In Uwss Vijainagar In Sub Dn. Vijainagar Under Dn. Beawar. Submission Date for this Tender is 29-02-2024. Water Supply Project Tenders in Ajmer Rajasthan. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Running expenditure of pump houses which include complete operation of pump motor, maintenance of log book as directed by Engineer in charge , general upkeeping of premises , security arrangements, Regular chemical dosing in CWR, cleaning and deslilting of SR/CWR/SUMP once every six months , daily valve operation under the campus of pump house and all other works as mentioned in scope of work in tender document for per pump house per month (power supply minimum 16 hrs )(excluding repairing of pumping machinery) |
| 2 | Upto 100 HP |
| 3 | FCP Bijainagar Pump House |
| 4 | Tara kheda Pump House |
| 5 | Rewinding of 3 phase squirrel cage induction motor of HSC pump sets including all necessary material and of the same charactaristics as original with required size of super enamalled copper wire (including cost of copper wire) "E" class insulation material and testing of motor on no load but to be guaranteed against testing on load at site , i/c making electrical connections at site of installation of motor with starter , alignment with pump sets and transportation to and fro from installation site complete as per direction of EIC at site |
| 6 | Above 60 HP but upto 75 HP |
| 7 | Supplying and fixing of spare parts HSC Pump sets (MOTOR + PUMP) |
| 8 | Connection plates |
| 9 | Above 50 HP to 100 HP |
| 10 | Cooling fan |
| 11 | Above 50 HP to 100 HP |
| 12 | Fan cover |
| 13 | Above 50 HP to 100 HP |
| 14 | GM/SS Gland guide bush |
| 15 | Above 50 HP to 100 HP |
| 16 | Shaft with sleeve check nut |
| 17 | Above 50 HP to 100 HP |
| 18 | Shaft chuck nut |
| 19 | Above 50 HP to 100 HP |
| 20 | GM Neck ring |
| 21 | Above 50 HP to 100 HP |
| 22 | Bush shaft sleeve of GM |
| 23 | Above 50 HP to 100 HP |
| 24 | GM Gland Cover |
| 25 | Above 50 HP to 100 HP |
| 26 | SS Shaft (Non magnetic) |
| 27 | Above 50 HP to 100 HP |
| 28 | MS Shaft check nut |
| 29 | Above 50 HP to 100 HP |
| 30 | Cooling pipe set with nozzle and nut |
| 31 | Above 50 HP to 100 HP |
| 32 | Air cock |
| 33 | Above 50 HP to 100 HP |
| 34 | JOB WORK FOR REPAIR OF PUMP MOTOR |
| 35 | Bearing housing (Rebuilding, turning& finishing) |
| 36 | 5 HP to 20 HP |
| 37 | Above 50 HP to 100 HP |
| 38 | Bearing cap (Rebuilding, turning& finishing) |
| 39 | 5 HP to 20 HP |
| 40 | Above 50 HP to 100 HP |
| 41 | Impeller reconditionong of all type of pumps |
| 42 | 5 HP to 20 HP |
| 43 | Above 50 HP to 100 HP |
| 44 | Labour charge for dismantalling & Assembling of pump |
| 45 | Above 50 HP to 100 HP |
| 46 | Coupling with stud and rubber bush |
| 47 | Above 50 HP to 100 HP |
| 48 | Rewinding of 3 phase squirrel cage induction motor of monoblock pump sets including all necessary material |
| 49 | 15 HP |
| 50 | 17.5 HP |
| 51 | Supplying and fixing of spare parts for Monoblock Pump sets (MOTOR + PUMP) |
| 52 | Connection plates |
| 53 | 10 HP to 20 HP |
| 54 | Cooling fan |
| 55 | 10 HP to 20 HP |
| 56 | GM/SS Bush |
| 57 | 10 HP to 20 HP |
| 58 | Mechanical reconditiong of bearing sheet |
| 59 | 10 HP to 20 HP |
| 60 | Mechanical reconditiong of impeller sheet and key way slot |
| 61 | 10 HP to 20 HP |
| 62 | Oil seal |
| 63 | 10 HP to 20 HP |
| 64 | Labour charge for opening and fitting of pump sets |
| 65 | 10 HP to 20 HP |
| 66 | Supply and fixing ball bearing of varoius size for CF/MB pump set of ISI mark as per specification and approved make by EIC |
| 67 | 6308 or equivalent size |
| 68 | Routine maintenance of Centrifugal coupled pump and motor i/c opening , cleaning, greasing and refitting/changing ball bearing if required, gland refelling and replacing all rusted studs, replacing rubber bushes and coupling nut &bolts for coupling pulley, tightening all nut &bolts of foundation , base plate, pump & motor i/c necessary materials i.e grease, nut & bolts, studs, washers, gland packing and rubber bushes etc work done at site complete job |
| 69 | 5 HP to 20 HP |
| 70 | Above 50 HP to 100 HP |
| 71 | Replacing of damaged/broken gland packing plate with new gland packing plate suitable for centrifugal pump shafts and nut bolts ect complete job |
| 72 | 5 HP to 20 HP |
| 73 | Above 50 HP to 100 HP |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
