Rural Works Department has published Tender For Amp Of Chudapudug To Bhartapur Road For 2023-24. Submission Date for this Tender is 26-02-2024. Road Work Tenders in sambalpur Odisha. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Construction of un-reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub-base, with 43 grade cement or any other type as per Clause 1501.2.2, M30 (grade) coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25mm mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the form work as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars near approaches to bridges and culverts (expansion joints), admixtures as approved, curing of concrete slabs for 14 days, curing compound and water finishing to lines and grade as per drawing and Technical Specification Clause 1501. |
| 2 | Earth work in excavation of foundation of structures up to 3.0mtr as per drawing and technical specification clause 1104 including setting out, construction of shoring and bracing removal of stumps and other deleterious matter dressing of sides etc complete as per the direction of Engineer in Charge. |
| 3 | Back filling in foundation trenches as per drawing and technical specification clause 1108 and 305.3.9 of MORD specification etc complete asper direction of Engineer in charge. |
| 4 | Plain cement conctrete (1:3:6) nominal mix in levelling course below open foundation of head walls as per drawings and technical specification clause 802,803,1109,1202,1203 of MoRD specification and direction of Engineer in charge. |
| 5 | Providing and laying reinforce cement concrete Pipe NP3 of 600mm dia for culverts on first class bedding of granualr material in single row incuding fixing collar with cement mortar (1:2) but excluding excavation protectin works back filling concrete and masonary works in head walls etc complete asper direction of Engineer in charge. |
| 6 | Plain cement concrete in foundation, Nominal mix (1;2.5:5) complete as per drawings and technical specification clauses 802,804,805,806,.807,1202 and 1204 etc complete. |
| 7 | Plain cement concrete in Sub-structure, Nominal mix (1;2.5:5) complete as per drawings and technical specification clauses 802,804,805,806,.807,1202 and 1204 etc complete. |
| 8 | Earth work in excavation of foundation of structures up to 3.0mtr as per drawing and technical specification clause 1104 including setting out, construction of shoring and bracing removal of stumps and other deleterious matter dressing of sides etc complete as per the direction of Engineer in Charge. |
| 9 | Back filling in foundation trenches as per drawing and technical specification clause 1108 and 305.3.9 of MORD specification etc complete asper direction of Engineer in charge. |
| 10 | Providing plain cement concrete of M15 grade in foundation complete as per drawing and technical specifications clauses 800 & 1200 of MORD and asper direction of engineer in charge. |
| 11 | Providing plain cement concrete of M15 grade in foundation complete as per drawing and technical specifications clauses 800 & 1200 of MORD and asper direction of engineer in charge. |
| 12 | Providing concrete for reinforced cement concete of M25 in superstructure complete as per drawing and technical specifications clauses 802,803,1202 & 1203 of MORD and as per direction of Engineer in charge |
| 13 | Straightening bent up or coiled M.S. rod or HYSD steel (Fe-500/fe-415), cutting, bending, cranking, hooking, welding or jointing (if required), the M.S. rod or HYSD steel and binding, tying the grills, hoisting, lowering and placing in proper position as required for R.C.C. works including cost, conveyance andM.S. rod or HYSD steel and binding wires of 18 to 20 gauge and labour with all T&P required for the work etc. complete in all floors(payment will be made on weight of M. S. Rods or Tor Steel only and no separate payment will be made towards the weight of binding wires). etc. complete as per specification & direction of Engineer-in-charge |
| 14 | Providing Weep Holes is Brick Masonry/ Paln/ Rainforced concrete abutment, wing wall / return wall with 100mm dia AC pipe, extending through the full width of the structure wirh slope of IV:2H towards drawing force etc, complete. |
| 15 | Earth work in excavation of foundation of structures up to 3.0mtr as per drawing and technical specification clause 1104 including setting out, construction of shoring and bracing removal of stumps and other deleterious matter dressing of sides etc complete as per the direction of Engineer in Charge. |
| 16 | Supplying & filling good clean river sand of approved quality including watering to complete saturation & ramming complete with all leads & lifts including cost, conveyance, royalty & taxes of all materials & cost of all labour & T&P required for the worketc. complete as per specification & direction of Engineer in charge. |
| 17 | Plain/reinforced cement concrete in open foundation complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204 of MORD specification for Rural roads including cost,conveyance, royalty, taxes,labour and T&P required for the work and as per the direction of the Engineer-in-Charge. (PCC -M15) |
| 18 | Plain cement concrete in foundation, Nominal mix (1;2.5:5) complete as per drawings and technical specification clauses 802,804,805,806,.807,1202 and 1204 etc complete. |
| 19 | Providing Weep Holes is Brick Masonry/ Paln/ Rainforced concrete abutment, wing wall / return wall with 100mm dia AC pipe, extending through the full width of the structure wirh slope of IV:2H towards drawing face etc, complete. |
| 20 | Earth work in excavation of foundation of structures up to 3.0mtr as per drawing and technical specification clause 1104 including setting out, construction of shoring and bracing removal of stumps and other deleterious matter dressing of sides etc complete as per the direction of Engineer in Charge. |
| 21 | Supplying & filling good clean river sand of approved quality including watering to complete saturation & ramming complete with all leads & lifts including cost, conveyance, royalty & taxes of all materials & cost of all labour & T&P required for the worketc. complete as per specification & direction of Engineer in charge. |
| 22 | Plain/reinforced cement concrete in open foundation complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204 of MORD specification for Rural roads including cost,conveyance, royalty, taxes,labour and T&P required for the work and as per the direction of the Engineer-in-Charge. (PCC -M15) |
| 23 | Providing concrete for plain/ reinforced concrete M20 in open foundation complete as per drawing and MORD technical specification clauses 800,1100,1200 as per direction of Engineer in charge. (Dirt wall) |
| 24 | Drain Bed |
| 25 | Providing concrete for reinforced cement concete of M25 in superstructure complete as per drawing and technical specifications clauses 802,803,1202 & 1203 of MORD and as per direction of Engineer in charge |
| 26 | Straightening bent up or coiled M.S. rod or HYSD steel (Fe-500/fe-415), cutting, bending, cranking, hooking, welding or jointing (if required), the M.S. rod or HYSD steel and binding, tying the grills, hoisting, lowering and placing in proper position as required for R.C.C. works including cost, conveyance andM.S. rod or HYSD steel and binding wires of 18 to 20 gauge and labour with all T&P required for the work etc. complete in all floors(payment will be made on weight of M. S. Rods or Tor Steel only and no separate payment will be made towards the weight of binding wires). etc. complete as per specification & direction of Engineer-in-charge |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
