|
| 1 | Supplying and Erecting HaveliJharokha\" Hand - Etched Iron wall Lamp Size - 14.5cm x 6.6cm x ht.35.3cmthe wall lamp is inspired from the traditional archelogical beauty of ancient indian places. Bulb holder Type E-27 |
| 2 | Supplying and Erecting Philips 31402 Muziris 7W picture Light Aluminium Material Is used,Holder Type is Led integrated , lumen output - 270 Lm. |
| 3 | Supplying and Erecting Chandelier |
| 4 | Supplying and Erecting Brand: CasaCraftPack Content: 1 Pc. ,Bulb Not IncludedWeight: 1 KgsShade Color : Beige Material:FabricNo.of Lights:1Sku: LL1765660-S-PM33999 |
| 5 | Supplying and Erecting Brand: HomesakePack Content: 1 Pc Lamp & Shad,. Bulb Not IncludedHolder & Plug type: B-22 HolderWeight: 1 KgsShade Color : GoldBase Material: WoodWire Length:1.8mSku: LL1767429-S-PM12745 |
| 6 | Supplying and Erecting Brand:Philips LightingMaterial: MetalWeight: 0.4kgColour:WhitePack Content: 1 Picture Light . Bulb not includedSku: LL1803942-S-PM2461 |
| 7 | Supplying and Erecting Brand: Eliante by Jainsons LightsPack Content: 1Wall Light. Bulb Not IncludedHolder & Plug type:Inbuilt LEDWeight:0.85kgMaterial :GlassColor :YellowSku: LL1803322-S-PM31431 |
| 8 | Supplying and Erecting Brand: Fos LightingMaterial: Aluminium And GlassDimensions: 6.75X9.5X15Weight: 2.5Colour: GoldPack Content: 1 Light Fixture. Bulb not includedSku: LL1382121-S-PM20623 |
| 9 | SITC of ETC: Suravi Solar Glass tubes Manifold Collectors of Co-Axial Twin Triplelayer Al-SS-CU & Nitrite high efficient tube, Transmittance of glass more than92%. Tank: MS Epoxy Coated with 3mm thick insulated hot water storagetank with Manhole & Rockwool Insulation 48kg/m3 density 100mmdiametrically thick covered with pre-coated cover. Stand for the tank and frontand back supports for collectors.Hot Water piping½ ” piping @ Rs. 300/meter, ¾” piping @ Rs. 325/meter,1” piping @ Rs. 375/meter, 1 1/4” piping @ Rs. 425/meter, Gate Valves- 1 1/4”@Rs.1000, 1” @Rs.750, NRV- ½” @Rs.300,1 1/4” @Rs.1000. Piping will be billed at actual after installation.Heat Pump Water Heater & Tank Installation, Fitting charges. Transport charges Total Price of Suravi Solar ETC Manifold Glass Tube Solar System3000LPD x 2nos. =6000LPD with Installation, Piping, Fitting andTransport. Note: Cold water inlet & piping to solar in client scope. |
| 10 | Suravi Water Heater Tank 3000LPD Standard make MS Epoxy Coated 3mm thicktank with highly efficient Welding and Rockwool Insulation 48kg/m3 density200mm diametrically thick covered with Aluminum cover with Stand. Qty. 2nos.Suravi Air Source Heat Pump 550LPH,& Tank 3000LPD x 2nos= 6000LPDPower Input 5KW and Out Put 20KW, 3PH With Hot Water Circulation PumpQty. 2nos. Hot Water piping½ ” piping @ Rs. 300/meter, ¾” piping @ Rs. 325/meter,1” piping @ Rs. 375/meter, 1 1/4” piping @ Rs. 425/meter, Gate Valves- 1 1/4”@Rs.1000, 1” @Rs.750, NRV- ½” @Rs.300,1 1/4” @Rs.1000. Piping will be billed at actual after installation.Heat Pump Water Heater & Tank Installation, Fitting charges.Transport chargesTotal Cost of Suravi Heat Pump Water Heater 550LPH x 2nos. & Tank 3000LPDx 2nos.=6000LPD system with Installation, Piping, Fitting and Transport.Note: Cold water inlet & piping to solar in client scope. |
| 11 | Specifications of 22000 Ansi Lumins Projector - GeneralNoise level (typical) 38dBNoise level (max) 40dB3D Full 3DIP rating IP5X360° operation YesOperating conditions Operating: 10~85%RH, non-condensing. Storage: 5~90%RH,non-condensingRemote control Backlit Pro AV remoteNetworkingLAN - control YesLAN - wireless networking NoLAN YesPowerPower supply AC 100–240 V @ 50/60 HzPower consumption (standby) 0.5WPower consumption (min) 590WPower consumption (max) 1,900WWeight and dimensionsDimensions (W x D x H) 650 x 682 x 300.86Gross weight 66.5 kgNet weight 54 kg |
| 12 | 11500 Ansi Lumins Projector Display Specifications of 11500Ansi Lumins Projector Display technology DLPResolution WUXGA (1920x1200)Brightness 11,500 lumensANSI brightness 10,000Contrast ratio 20,00,000:1 Native aspect ratio16:10Aspect ratio compatible16:9,16:10Screen Size – Depenent on lensLamp InfoOpticalThrow ratio – Depenent on lensProjection distance - Depenent on lensLens Options BX-CTA16 - 0.36 ~ 0.36BX-CTA17 - 0.65~0.75BX-CTA15 - 0.75 ~ 0.95BX-CTA01 - 0.95 ~ 1.22BX-CTA06 - 1.22 ~ 1.53BX-CTA03 - 1.52 ~ 2.92BX-CTA13 - 2.90 ~ 5.50 |
| 13 | Weatherised enclosure for equipment. Equipment should be compelte with fans and temperature sensors remote controlled with all accessories. |
| 14 | CONTENT DEVEOLPEMENT AND ACTIVITIESDuration split in videos : 2D Animations , animations and motion graphics, Fiction and non fiction shoot, 3 D animation Videos :Edit DI Background music Sound designing and mixing. Voice over original composed songs |
| 15 | CREATIVE TEAM: Script research team Content writers Directors Creative Director Creative producer VFX director Asst Directors Producer |
| 16 | FICTION AND NON FICTION SHOOT:Production Manager Director of photography Production designer Art assisstant Cosstume designer Costume team Hair and makeup artist.Drone operator Actors |
| 17 | POST PRODUCTION : Post production head Editors Asst Editor Sound designer Foley artist Background composer Music director Lyrcist Arrangement and mixing Singers Voice over artist male and female Audio final mix DI colorist Data transfer analyst. Online editors |
| 18 | Animation and VFX Story board Pre visualization Illustration 3D Modeling 3D Texturing 3D lighting 3D rigging 3D Animators 2D Animators Visual Graphics Roto Artist |
| 19 | SOUND SYSTEM :Main speakerspeaker specificationsFrequency Range (-10dB)- 52 Hz – 20 kHz Frequency Response - (±3 dB) 80 Hz – 20 kHz Coverage Pattern- 90° x 90° Directivity Factor - (Q) 11.1 (1 kHz – 16 kHz) Directivity Index - (DI) 9.7 dB (1 kHz – 16 kHz) System Power Rating - 500 W (2000 W peak), 2 hrs. 300 W (1200 W peak), 100 hrs Sensitivity (2.83V @ 1m) - 98 dB (Ave. 80 Hz – 20 kHz) Maximum SPL (1m) - Direct 8O: 125 dB (peaks of 131 dB) 300 W Tap: 123 dB (peaks of 129 dB) Crossover Network - 1.5 kHz, 4th order (24 dB/oct) high-pass plus conjugate to HF, 2nd order low-pass to LFNominal Impedance -- 8 ohms speaker specificationsHF Driver - 2408H-2 38 mm (1.5 in) diaphragm and voice coil diameter, patented high-temperature annular polymer diaphragm, copper-clad aluminum coil, fluid-cooled.Enclosure- ABS with Glass enclosure, heavily bracedAttachment - Two M10 (course-thread) points for included U-bracket. M6 secondary safety attachment point on back panel.Grille - Corrosion-resistant zinc-rich extra-thick powder coated steel grille, 3-layer assembly with foam and woven poly mesh backing.Input Connection - CE-compliant covered barrier strip terminals. Barrier terminals accept up to 8 mm outside 4 mm inside open-lug (#6 or #8) plus bare wire up to 2.5 mm2 (12 AWG) wire or spade lugs. Terminal compartment cover equipped with gland nut that forms water-tight seal with round jacketed cables with outside diameters between 4.0 mm (0.16\") and 9.0 mm (0.36\")speaker specificationsEnvironmental - IP56 per IEC529, with a minimum 5° downward aiming angle. Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV, and ASTM G85 for acid-air/salt-spray (336 hrs).Dimensions - 486 x 486 x 479 mm (19.1 x 19.1 x 18.8), cabinet 507 mm (19.9 in) depth with gland nut 546 mm (21.5 in) including bracket extending to backColors - Available in gray (similar to Pantone 420C) and black (-BK)speaker specificationsIncluded Accessories -U-bracket, matches loudspeaker color (gray or black), zinc-rich extrathick powder coated, steelCrossover Modes- Passive Nominal LF Driver Impedance - 8 ohms Suspension Attachment- Two M10 (fine-thread) points for included U-bracket. M6 secondary safety attachment point on back panel.Net Weight (each)- 20.6 kgs. (45.5 lbs.)12\" 2 way speaker specificationsFrequency Range (-10dB)- 55 Hz – 20 kHz Frequency Response (±3 dB) -80 Hz – 20 kHz Coverage Pattern - 90° x 90° Directivity Factor (Q)- 10.1 (1 k – 16 kHz) Directivity Index (DI)- 9.5 dB (1k – 16 kHz) System Power Rating - 400 W (1600 W peak), 2 hrs. 250 W (1000 W peak), 100 hrs Sensitivity (2.83V @ 1m) - 96 dB (Ave. 80 Hz – 20 kHz) Maximum SPL (1m)- Direct 8O: 122 dB (peaks of 128 dB) 200 W Tap: 119 dB Crossover Network - 1.5 kHz, 3rd order (18 dB/oct) high-pass plus conjugate to HF, 2nd order low-pass to LFNominal Impedance - 8 ohms Transformer Taps - 70V: 200W, 100W, 50W, 25W 100V: 200W, 100W, 50W LF Driver - Kevlar-reinforced cone with weather treatment, 75 mm (3 in) voice coil. HF Driver - 25 mm (1 in) diaphragm and voice coil diameter, high temperature polymer diaphragm, patented design, fluid-cooling. 12\" 2 way speaker specificationsHF Driver Protection - Minimum audibility Sonic Guard™ HF overload protection Enclosure- ABS with Glass enclosure, heavily braced Attachment - Two M10 (fine-thread) points for included U-bracket. M6 secondary safety attachment point on back panel. Grille - Corrosion-resistant zinc-rich extra-thick powder coated steel grille, 3- layer assembly with foam and woven poly mesh backing. Input Connection - CE-compliant covered barrier strip terminals. Barrier terminals accept up to 9 mm outside 4 mm inside open-lug (#6, #8 or #10) plus bare wire up to 2.5 mm2 (12 AWG) wire or spade lugs. Terminal compartment cover equipped with gland nut that forms water-tight seal with round-jacketed cables with outside diameters between 4.0 mm (0.16\") and 9.0 mm (0.36\") Environmental - IP56 per IEC529, with a minimum 5° downward aiming angle. Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV, and ASTM G85 for acid-air/salt-spray (336 hrs). Dimensions- 402 x 402 x 445mm (15.8 x 15.8 x 17.5 in), cabinet 470 mm (18.5 in) depth with gland nut 542 mm (21.4 in) including bracket extending to back 12\" 2 way speaker specificationsColors - Available in gray (similar to Pantone 420C) and black (-BK) Net Weight (each) - 15.9 kg (35.0 lb), 18.9 kg (41.5 lb) with u-bracket Shipping Weight - 23.4 kg (51.5 lbs) Included Accessories - U-bracket, matches loudspeaker color (gray or black), zinc-rich extra thick powder coated, steel. Crossover Modes – Passive Nominal LF Driver Impedance - 8 ohms Suspension Attachment- Two M10 (fine-thread) points for included U-bracket. M6 secondary safety attachment point on back panel. |
| 20 | surrounds |
| 21 | sub woofer SpecificationsFrequency Range (-10dB) -45 Hz – 2.2 kHz Frequency Response (±3 dB) - 70 Hz – 1.2 kHz System Power Rating - 500 W (2000 W peak), 2 hrs. 300 W (1200 W peak), 100 hrs. Sensitivity (2.83V @ 1m) - 94 dB (Ave. 80 Hz – 300 Hz) Maximum SPL (1m)- Direct 8O: 121 dB (peaks of 127 dB) 300 W Tap: 119 dB (peaks of 125 dB) Nominal Impedance - 8 ohms (in Direct mode)Transformer Taps - 70V: 300W, 150W, 75W, 38W 100V: 300W, 150W, 75W LF Driver - 380 mm (15 in), Kevlar-reinforced cone, with weather treatment, 75 mm (3 in) voice coil, long throw. Enclosure- ABS with Glass enclosure, heavily bracedsub woofer SpecificationsAttachment- Two M10 (course-thread) points for included U-bracket. M6 secondary safety attachment point on back panel. Grille - Corrosion-resistant zinc-rich extra-thick powder coated steel grille, 3-layer assembly with foam and woven poly mesh backing. Input Connection- CE-compliant covered barrier strip terminals. Barrier terminals accept up to 8 mm outside 4 mm inside openlug (#6 or #8) plus bare wire up to 2.5 mm2 (12 AWG) wire or spade lugs. Terminal compartment cover equipped with gland nut that forms water-tight seal with round-jacketed cables with outside diameters between 4.0 mm (0.16\") and 9.0 mm (0.36\") sub woofer SpecificationsEnvironmental - IP56 per IEC529, with a minimum 5° downward aiming angle. Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV, and ASTM G85 for acid-air/salt-spray (336 hrs).Dimensions - 486 x 486 x 479 mm (19.1 x 19.1 x 18.8), cabinet 507 mm (19.9 in) depth with gland nut 546 mm (21.5 in) including bracket extending to back Included Accessories- U-bracket, matches loudspeaker color (gray or black), zinc-rich extra-thick powder coated, steel. Nominal LF Driver Impedance - 8 ohms (in Direct mode) Suspension Attachment- Two M10 (fine-thread) points for included U-bracket. M6 secondary safety attachment point on back panel. Net Weight (each)- 20.2 kgs. (44.5 lbs.) Coverage Pattern- Omnidirectional |
| 22 | Amplifier 600 watts/ 8channels |
| 23 | Amplifier1200 watt / 4 channel Amplifier SpecificationsFrequency Response (8O, 20Hz - 20kHz) Output Channels – 4Total Harmonic Distortion (At full rated power 20Hz – 20 KHz – 0.35 %Damping Factor (20Hz to 100Hz) >1500 Load Impedance (Stereo/Dual Mode) 2O - 16O; 70Vrms and 100VrmsLoad Impedance Bridge Mono - 4O - 16O; 140Vrms and 200VrmsCooling - Continuously variable speed forced air, front to back airflowMaximum Fan Noise (re dBA SPL @ 1M) - 47 Required AC Mains (±10%) - 100V-240V ~ 50/60HzPower Connector 20A IECDimensions (W x H x D) - 483 mm x 89 mm x 432 mm19 in x 3.5 in x 17 inWeight - 13.60 kg (30 lbs) |
| 24 | cinema processor SpecificationsCinema processor Dolby.3 × GB Ethernet (1000Base-T/RJ-45)1 × eSATA 3 Gbps1 × USB 2.02 × USB 3.0Dual 3G SDI Inputs (requires model IMS3000-NB)1 × HDMI® 2.0 (Up to 4K 60 fps)8 × AES-3 audio pairs (2 × RJ-45)2 x AES-3 Auxiliary Outputs2 x AES-3 Auxiliary Inputs1 x Dolby Atmos Connect output with loopback (AES67 Protocol Only)4 × GPI (1 × RJ-45) 6 × GPO (1 × RJ-45)LTC output3 × hot-swappable removable 2.5” HDDsMini DisplayPort console out (no UI)Dolby Remote Fader Port for use with optional CAT868cinema processor SpecificationsDCP playback2K up to 120 fps4K up to 30 fps (60 fps on on supported projectors and LED displays)Bit rates up to 500 Mbps12-bit 4:4:4 XYZ’ for all formatsSupport of SMPTE and INTEROP formatsInternal subtitle engine, or integrate with a projector for CineCanvas subtitle renderingDCI-compliantJPEG2000, MPEG2 and H.264 PlaybackMpeg-2/H.264720p 60, 1080i 60, and 1080p 60 Bit rates up to 50 Mbps4:2:0 8-bit colorcinema processor SpecificationsVideo processing featuresColor-space conversion—supports YCbCr601, YCbCr709, REC 709, XYZ’, YCxCzDeinterlacingScaler up to 4KAudio processing features (requires enablements)Dolby Surround 7.1 and 5.1 playbackDolby Atmos rendering up to 64 speakers with Full Atmos enablementDolby Digital PlusDolby Digital (AC-3)TrueHD Audio – Support Consumer Atmos on HDMI Input44.1 kHz, 48 kHz 96 kHz support at 16, 20 and 24 bitAES67Alternative Content Surround ProcessingHigh resolution multi-rate EQInternal crossover supports up to 4-way loudspeakerscinema processor SpecificationsControlWeb-based user interfaceBluetooth support for control from a tablet (Android and iOS)** Mini DisplayPort console out (debug console only)Third-party TMS and NOC systemsAPI documentation available on requestSecurityDCI-compliant forensic watermarkingFIPS 140-2 (Level 3 security certified)cinema processor SpecificationsPower consumption <70 WStorageInternal—3 × 2.5” 1 TB hard disk drives (RAID 5 Configuration) Approximately 1.8 TB of user storage Internal—3 x 2.5” 2TB Solid State Drives (RAID 5 Configuration) Approximately 3.6 TB of user storage IMS3000 + Main Storage NAS - 4 x 3.5” 4TB hard disk drives (RAID 5 configuration). Approximately 10.5 TB of userstorage No internal drives are used in the IMS3000 and the NAS can ingest when the IMS3000 is off.IMS3000 + Additional Storage NAS - (This option uses the IMS3000 internal storage and an external storage NAS but does not support offline ingest to the NAS).***Shared NAS in Chase Mode (Dual Projection - requires model IMS3000-NB - this option has two IMS3000 servers in Chase mode utilizing one an external storage NAS with approximately 10.5TB of user storage) |
| 25 | Mixer Specifications16-Channel Mixing ConsoleMax. 10 Mic / 16 Line Inputs (8 mono + 4 stereo)4 GROUP Buses + 1 Stereo Bus4 AUX (incl. FX)“D-PRE” mic preamps with an inverted Darlington circuit1-Knob compressorsHigh-grade effects: SPX with 24 programs24-bit/192kHz 2in/2out USB Audio functionsWorks with the iPad (2 or later) through the Apple iPad Camera Connection Kit / Lightning to USB Camera AdapterIncludes Cubase AI DAW software download versionPAD switch on mono inputs+48V phantom powerXLR balanced outputsInternal universal power supply for world-wide useRack Mount Kit IncludedMetal chassisDimensions(W×H×D): 444 mm x 130 mm x 500 mm (17.5\" x 5.1\" x 19.7\")Net Weight: 6.8 kg (15.0 lbs.)Mixer SpecificationsDSP BSS BLU-100Chassis- 19” single Rack SpaceAnalog Input—12Analog out put—8Logic Processing, RS 232, GPIO,Signal processing ( MHz)—400SWL Digital Audio Bus—48 |
| 26 | Wireless mic |
| 27 | Monitor sp |
| 28 | Wired mic |
| 29 | Digital signal processor |
| 30 | All cables and connectors with 2.5 sq mm , 6 core armoured cable |
| 31 | rack 42u 600 x 900 |
| 32 | Amplfier 250 watts for monitor |
| 33 | Special effect lighting.Graphic laser SpecificationsTotal Power 400 mWPower Red 180 mW / 650 nmPower Green 80 mW / 532 nmPower Blue 160 mW / 450 nmBeam Specifications ca. 3 mm / 2 mradScanner ca. 15 kpps@4°, graphics capableOperation Modes ILDA, Stand-alone mode, sound-to-lightmode, text mode, clock mode, DMXLaser Class 3BLaser Source DPSS, DiodeIP rating IP4XBasic Patterns ca. 50Accessories Keyboard, USB extension cable, infraredremote control, interlock, key, externalpower supply 12 VPower Supply 100 - 250 V ACPower Consumption 10 WDimensions 210 x 165 x 85 mmWeight 1.64 kg Graphic laser SpecificationsTotal Power 400 mWPower Red 180 mW / 650 nmPower Green 80 mW / 532 nmPower Blue 160 mW / 450 nmBeam Specifications ca. 3 mm / 2 mradScanner ca. 15 kpps@4°, graphics capableOperation Modes ILDA, Stand-alone mode, sound-to-lightmode, text mode, clock mode, DMXLaser Class 3BLaser Source DPSS, DiodeIP rating IP4XBasic Patterns ca. 50Accessories Keyboard, USB extension cable, infraredremote control, interlock, key, externalpower supply 12 VPower Supply 100 - 250 V ACPower Consumption 10 WDimensions 210 x 165 x 85 mmWeight 1.64 kgGraphic laser SpecificationsTotal Power 400 mWPower Red 180 mW / 650 nmPower Green 80 mW / 532 nmPower Blue 160 mW / 450 nmBeam Specifications ca. 3 mm / 2 mradScanner ca. 15 kpps@4°, graphics capableOperation Modes ILDA, Stand-alone mode, sound-to-lightmode, text mode, clock mode, DMXLaser Class 3BLaser Source DPSS, DiodeIP rating IP4XBasic Patterns ca. 50Accessories Keyboard, USB extension cable, infraredremote control, interlock, key, externalpower supply 12 VPower Supply 100 - 250 V ACPower Consumption 10 WDimensions 210 x 165 x 85 mmWeight 1.64 kgLight Specifications Haze MachineWorking principle: Vaporizer foggerHeating capacity: 3200 wattsSupply voltage: 200 – 250V, 50/60HzHeating time: approx. 15 minutes.Fluid consumption: 10 ml/sec. at maximum outputFluid tank capacity: 2 litersFog emission: adjustable (100 milliseconds to 2 seconds)Ejection distance: Pressure adjustable in four levelsTemperature control: Microprocessor controlledOverheating protection: Heating block with thermostat, pump with temperature switchConnections: DMX 512, Ethernet (ArtNet, sACN)Dimensions (L x W x H): 45x38x28cmWeight: 28.5 kg including fluid Light SpecificationsLED ParcanLED Qty: 144x10W Multichip(RGBW)Drive Current: 700mAMax Power: 1100WOptics: 30 DegreeDimensions: 585 x 189 x 308 mmWeight: 14.5kgHousing: Die-cast aluminiumColor: BlackEnvironment: Ip65IP POWER Socket, IP DMX XLRLight SpecificationsMoving HeadOptical systemLight source: 260W LaserAngle: 1Size: 416×358×712mmWeight: 39kgCasing: Flame-retardant plastic (v0) Die-cast aluminumColor: BlackElectrical SpecsVoltage: AC100-240V, 50/60HzMax. Power: 350WPower Connection: power inSignal Soccer: 3pin or Spin in and out. RI45 in and out Light Specifications 260W laser light source waterproof beam moving head light. 230mm super large light-emitting lens, 1° extremely narrow beam angle, close to parallel beam, beam diameter is only 0.87 meters at a distance of 100 meters and the illuminance is about 20000lux. The beam is stronger and sharp edges and the beam formed by high-efficiency optics is Ike a bright beam. It is suitable for urban landscape, cultural tourism lighting, concerts, theme parks and other places. |
| 34 | SharpySpecoficationsVoltage: wide voltage 110V-240V 50-60HzLight source: original OSRAM 380Total power: 600Color: imported from Italy Pure color: 13+1+multicolor rainbow effect+ atomization functionPattern: Pattern disc: 13 fixed pattern+1 white lightFocusing: electronic linear high-definition dynamic focusing, using high-density glass optical lens.Linear dimming curve: 0% - 100% linear dimmingBeam angle: 0-1.8 °Channels: 16/20 international standard DMX512 channels.Lens diameter: 160mmXY motor: three electric drives, powerful, faster, more stable and more silentAppearance: The lamp is made of high-strength engineering nylon plastic, anti UV treatment, high temperature resistant, anti-aging+high temperature resistant die-casting aluminum shell, lightweight, and adopts wind direction drainage and temperature intelligent monitoring technology, so it can dissipate heat quickly!Waterproof grade: IP65SharpySpecofications Control mode: DMX 512, self-propelled, master-slave self-propelledPrism: 8 prism rotatable, macro functionLamp body size: 424 * 367 * 725mmNet weight: 27KGPackage size: 600 * 500 * 850cmWaterproof grade: IP65. Beam Moving Head Light. Moving Head Light. LED Moving Head Light. Linear dimming curve: 0% - 100% linear dimming. Beam angle: 0-1.8 °. Color: imported from Italy Pure color: 13+1+multicolor rainbow effect+atomization function. |
| 35 | Parcan rgwb |
| 36 | Haze machine |
| 37 | Show control |
| 38 | Splitors Martins, LBT,claypackFOR LIGHT AND SOUND SHOW |
| 39 | Nerwork switches 24port - Netgear, Dlink FOR LIGHT AND SOUND SHOW |
| 40 | Laser battern - Martins, LBT,claypack FOR LIGHT AND SOUND SHOW |
| 41 | power conditioner 20kv, 63 amps, 3 phase. |
| 42 | 3 core 2.5 sqmm armored cable with laying and installation ( aprox 2000 mtrs ) with 15 amp 3 pin top with cover IP65 rating points( 50 Points outdoor ) |
| 43 | DMX armoured cable 2 core shielded, ( 1000 mtrs) with installation |
| 44 | Control Room: 3 Phase panel, 125Kv, 1.5 ton split AC. Basic lighting, Operotor desk with revolving chair, False flooring, grid ceiling. Complete in all aspects with see through window |
| 45 | Fabrication : Fabrication of trusses for light fixtures, projectors, sound system. |
| 46 | ELECTRICAL WORKS Panel board with 3 phase in and out with 50 nos of MCB, volt meter, amp meter, 3 phase indication andall accessories. |
| 47 | MISCELENOUS ITEMS All connectors for lights and sound system, Light brackets, speaker mounting barackets, projector suspension clamps. |
| 48 | Transimeter and recieiver for projector , HDMI cables, Cat 6 armoured sheilded, |
| 49 | Supplyinginstallationtesting & commissioning of totally enciosed cubical indoor types PCC MV Panel floor /wall mountedfabricationwith 2mm thick sheet steel power coated withseventank treatment prosess including providing & fixing the bus -bar chambercable alley switch gearsmountingthere in cable terminationinterconnection as required suitablefor 415 Volts3 phase 4 wire50 HZ AC Supply as per specfication including numberingearthing connection ect. as required.Panel shall be provided with all necesssery suitabel aceesories. A.Incoming 1 No 250 AMPSTP +NMCCB16 KA fault rating with Micro- processor based release for protection as incomer Set of Aluminium bus bar suitble for 250 AMPS 3. 1 No 500 VoltDigital Voltmeter with selector switch 4. 1 Set 100 Amps Digital Ammeter withCTS & seector switch 5. 1 Set phase indicating lamp with MCB Protection6. 1 Set ON /OFFindicating lamps withMCB for protection B.Outgoing1. 02 Nos200 AMPS FP MCCB with tharmalmagnetic rele 10 KAFault rating 2. 3 NOS OF 100 AMPS FP MCCBwith tharmalmagnetic rele 10 KAFault rating 3. 05 Nos63 AMPS FP MCB with tharmalmagnetic rele 10 KAFault rating04 2 Nos32 AMPS FP MCB with tharmalmagnetic rele 10 KAFault rating.PANEL SHALL BE AS PERIS 61439 |
| 50 | Supplying and installing auto glow (Viewing up to 15 mtr length) fire signages in PVC/Vinyl 4/6mm thick sheet or as per sample approved by clientviz fire hydrant fire hydrant fire extinguishers fire exists fire door fire hose box fire & Electrical & safety etc size 300mm* 100 mm |
| 51 | Supplying and installing auto glow (Viewing up to 15 mtr length) fire signages viz fire hydrant fire hydrant fire extinguishers fire exists fire door fire hose box fire & Electrical & safety etc size 450mm* 150 mm |
| 52 | Supply & Eracting 1000 mm long25 mm dia. Stainless steel corrugated flexible pipe (hose)nfor dropping sprinkler below false ceilingpipe shall have 16 bar rating and with union/reducer collerclamps etc. as required. |
| 53 | Supplylnstaltationtesting & commisrioning of flow switches in 80/100/150 mm dia pipe with all acceslories as required. |
| 54 | Rossette Plate powder coated in white/off white colour with 25 mm dia. Hole. |
| 55 | Designfabricatesupplydeliverysite assemblyinstallationtesting and commissioning of 22000CFM 85MM SP floor mounted horizontal type two stage air washer unit with draw through arrangement. Air washer unit shall be of double skin construction type. The inner skin 24G (0.63 mm) plain G.I. panel and 24 G (0.63mm) G.I. preplasticized outer skin with 25 mm thick & 40±2 kg/m3 density PUF insulation sandwiched between panelwith internal covingwith necessary extruded Hollow Aluminium profile structure with nylon connectorsframe work for supporting channelsfoundation bolts with canvas connections & required accessories for final assembly. Blower door provided with mechanical guard and limit switches for additional safety. Primary blower shall be blow through design and plug type and fan drive consisting of TEFC 4PIP55 & IE2 type motor. Unit shall be provided with Marine light # 3 no\"s1 no limit switchinternal electrical wiring & cabling for limit switch & marine lightcontrol cabling for limit switch up to main HVAC MCC panel. Unit shall consists of following section viewing from fresh air entry side. Blower motor shall be with suitable rating VFD. Space provision shall be made in AHU to accomodate the electrical heater. Vendor representative should be present at the time of unloading and sgifting from store to manzenine floor. |
| 56 | SupplyInstallationTesting and Commissioning of 17000CFM 40MM SP approved make fan section for extract air complete with floor standing backward curved DIDWcentrifugal fanMS base frameIE-02 TEFC squirrel cage induction motor with 2 hour fire rating & classHinsulationdrive package and vibration isolation arrangement including spring isolatorsrubber grommets etc. as calledfor in workingdrawings & specifications. Fan section casing shall be ofdoubleskin sheet metal constructiondouble skin panels with 25mm thick injected PUF of density not less than 40 kg/CuM with canopy.Fanshall be suitablefor operation on 415 ± 10% volts50 Hz 3 phase AC power supply. Fan motor for kitchen fanshall be enclosed in GI sheet enclosure. Fan outlet velocity shallnotexceed2000 FPM.Extractfan section shall be suitable for ceiling suspension/floor installation as shown in the design drawings.The kitchen fan motor shall be outside hot air stream.The fancharacteristicsshallbe as follows |
| 57 | Supplyinginstallationtesting & commissioning of totally enciosed cubical indoor types PCC MV Panel floor /wall mountedfabricationwith 2mm thick sheet steel power coated withseventank treatment prosess including providing & fixing the bus -bar chambercable alley switch gearsmountingthere in cable terminationinterconnection as required suitablefor 415 Volts3 phase 4 wire50 HZ AC Supply as per specfication including numberingearthing connection ect. as required.A.Incoming1. 1 No .100 AMPSTP +NMCCB25 KA fault rating with Micro- processor based release for protection as incomer2. 1 Set of Aluminium bus bar suitble for 100 AMPS3. 1 No 500 VoltDigital Voltmeter with selector switch4. 1 Set 100 Amps Digital Ammeter withCTS & seector switch5. 1 Set phase indicating lamp with MCB Protection6. 1 Set ON /OFFindicating lamps withMCB for protectionB.Outgoing1. 2 Nos32 AMPS TP MCB with tharmalmagnetic rele 10 KAFault rating2. 2 Nos40 AMPS TP MCB with tharmalmagnetic rele 10 KAFault rating3. 2 Nos16 AMPS TP MCB with tharmalmagnetic rele 10 KAFault ratingC.Starter1. 2 Nos VFD provision with bypass DolStarter suitable upto 7.5 KW motor with OverloadSingle phasingUnder voltage and overvoltagephase reverse protection with necessary internal wiring. |
