Tender For Certain Comprehensive Repair Of B/R And E/M Items At Bldg No 4/N/8 Albert Ekka Vihar Under Ge(S) Binnaguri
Tender Value
48.50 Lakhs
Estimated cost
Bid Submission
12 Mar 2024
0 days left
EMD
97000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
binnaguri → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Certain Comprehensive Repair Of B/R And E/M Items At Bldg No 4/N/8 Albert Ekka Vihar Under Ge(S) Binnaguri As Per Tender Documents
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames exc 1.5 Sqm and n.exc 4 Sqm (without taking off shutter from the frames) and removal from site. |
| 2 | All as item No 1 here-in before but n.exc 1.5 Sqm each. |
| 3 | Taking down shutters and refixing in same openingof any description exc 1 Sqm but not exc 2 Sqm each complete all as specified and directed. |
| 4 | Dismantling floor hearth or wall tiling including cement mortar bedding (incl backing) removing serviceable tiles to store and rubbish off the premises. |
| 5 | Taking down cement plaster any description on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc. |
| 6 | Dismantling wrought iron or mild steel work of any description not otherwiseprovided for grils.rails etc |
| 7 | Hacking out of old broken glass any thickness size quality or description from metal frame including punching or drilling out old glazing pins. |
| 8 | Demolition of precast concrete block/brick wallingbuilt in cement mortarof any description etc complete all as specified. |
| 9 | Dismantling of cement concrete of any size, position and any description complete all as specified and as directed. |
| 10 | M&L for joint freenon-skid ceramic tiles(600x600x7 to 8 mm thick)tiles set and jointed in neat cement slurry pointed in white or coloured cementto match the floor over 15mm thick screed bed in CM(1:6) all as specified and directed. |
| 11 | All as item No 1.09 here-in before but of size 600 x 100mm on vertical surfaces over10mm thick backing in CM (1:4) |
| 12 | M&L for non-skid ceramic coloured (400x400x7 to 8 mm thick)tiles set and jointed in neat cement slurry pointed in white or coloured cementto match in floor over 15mm thick screed bed in CM(1:6) all as specified and directed by Engr-in-charge |
| 13 | M&L for glazed colouredceramic tiles (450x350x7mm thick)on vertical surfaces such as skirting/dado set and jointed in neat cement slurry pointed in white or coloured cement to match over 15mm thick rendering in CM(1:4) all as specified and directed. |
| 14 | M & L for 18 to 20 mm thick granite (of any type) work (table rubbed and polished) in steps, Jambs, pillars, window cills, cooking platforms,corner shelf,Flat shelf and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including 15 mm thick cement plaster (1:4)including rounded the exposed surfaces of granite complete all as specified. |
| 15 | All as per item no 1.13 butas in skirting ( 12 to 15 mm thick) but on 10 mm tkick rendering/ back coating in CM (1:4) complete all as specified and as directed. |
| 16 | M&L for MS flat iron bent to shape, holes drilled etc complete as inwind ties etc including one coat of red oxide paint. |
| 17 | S&F of factory made steel windows with side hung shutters openable type including friction/projected typehinges steel handle and peg stay complete withoutglazing bars fixed to existiog opening and making to match as per existing surfaces. |
| 18 | S&F of factory made steel windows with side hung shutters openable type including friction/box type hinges steel handle and peg stay complete with glazing bars fixed to existiog opening and making good to match as per existing surfaces including taking out old/unserviceable steel windows. |
| 19 | M&Lfor 75 mm thickcement concrete 1:3:6type C-2 (using 40 mm graded stone aggregate) as in path /steps laid with and incl use and waste of form workand finishing the surface even and rough to receivethe topping layer ortiling complete . |
| 20 | M&L for 25 mm thick PCC (1:2:4) type B1 ( 20mm graded stone aggregate) , finished concrete surfaces even androughto receive floor finishes. |
| 21 | M & L for providing plain cementconcrete type C-1, 1:3:6, (using 20 mm graded stone aggregate), as in copings, bed block for filing hollow space of steel chowkhats, fixing of hold fast, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed. |
| 22 | M & L for hard core of gauge not exc. 63 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and directed. |
| 23 | S&Fof 3mm thick float glass panes ordinary quality n.exc 0.5sqm each fixed to steel frame complete with oil putty in square including steel pin. |
| 24 | S&F for pressed steel frames for doors with one or more rebates including necessary lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 125 x60 mm |
| 25 | S&F for pressed steel frames for doors with one or more rebates including necessary lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 105 x60 mm |
| 26 | M&L for plain, framed, factory made panelled shutters 35 mm thick (any number of panels) , with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats. |
| 27 | S&F second class hardwood, factory made glazed and skelton shutters 35 mm thick open rebated and prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part-I Section8, Clause 8.20 (a) suppliedand fitted to chowkats. |
| 28 | S&F in repairs of 12mm thickblockboards grade -2 quality interior grade,commercial type including teak wood lipping 6mm thick all round fixed with nailsto timber framework complete all as specified. |
| 29 | S&F in repairs of 18 / 19mm thick block board grade 2 qualitywith decorative face veeners on one facefixed with screws to timber frame work as in repair including teak wood lipping 6mm thick all round fixed with nails complete all as specified. |
| 30 | S & F Continuous (piano) hinges Width of flaps 30 mm , mild steel, bright finish or electrogalvanised |
| 31 | S&Fin repair Hasp and staple, aluminium anodised,100mm longincluding bolt to hinge plate and fixed with screws |
| 32 | S&FHasp and staple, aluminium anodised,100mm longincluding bolt to hinge plate and fixed with screws |
| 33 | M&L for second class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded on chamfered put together with glue pinned and joints. |
| 34 | S &Fin repairstainless steel curtain rods 1.00mm thick and 20 -25 mm dia, anodised aluminium alloywith fixing brackets, stops,and complete fitments all as specified and directed. |
| 35 | Repair for wooden doors shutters and windows for proper closing/ opening including necessary cutting, filling, painting with synthetic enamel paint to match existing finishes complete all as specified and as directed. |
| 36 | S&F Powder coated aluminium louvered ventilators of size 600X600mm with glass louvers, without sash bars of aluminium sections weighing not less than 0.605kg/m for frame of size 40x20x2mm including necessary jointing cleats, glazingcleats, rubber packing , anodised aluminium snap beading,screws, anodised aluminium fittings and 5.5mm thick tinted glass fixed in panels with suitable locking arrangementsincluding taking down of old existing steel ventilator and making good disturbed surface of wall complete all as specified and as directed. |
| 37 | M & for water proofing treatment to sunken floor with the following course of treatment/ specification:(i) Cleaning top surface of floors /slabs and laying 50 mm thick (avg) PCC of grade M10 (Nominal mix) , mixed with WPC as per manufactrrer\"s instruction laid in slope 1:20 towards spouts including coveting corners(ii) 15 mm thick plastering in CM (1:4) on sides mixed with WPC as pe rmanufacturer\"s instruction. (iii) Applying 1st layer of slurry @ 0.488 kg / sqm mixed wth acrylic based polymer modified cementious compound @ 0.253 kg /sqm This layer shall be allowed to air cured for 4 hrs. (iv) applying 2nd layer of slurry @ 0.242 kg/sqm mixed with accrylic based polymer modified cementenous compound @ 0.126 kg/sqm.This layer shall be allowed to air cured for 4hrs followed with water curing for 48 hrs.(v) Applying a coat of industrial bitumen 85/25 penetration @ 1.50 kg/sqm on plastered and concrete surfaces (vi) Providing 150 micron thick polyutethene paint in two coats (each of 75 micron measured dry on dry surface over a coat of PU primer including preparation .(Make of PU primer - Dek guard EP -302 of M/S Fosroc or equivalant approved brand.Make of PU paint - Dek guard PUor equivalant approved brand. (vii) 2 Nos 32mm bore GI medium grade 450mm long spout ,to be provided through external wall to drainout accumulated water.(vii)Sunken floor shall be tested for water tighness by filling water for 72 hrs before and after treatment work is carried out and ensure that no leakage /seepage exists (ix) Sunken portion shall be filled with lean concrete of grade M7.5 stone agreegate |
| 38 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing on SI page No 156 of SSR Part-II completed. |
| 39 | S&F Solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as per specification and drawing on SI page No.160 of SSR Part-II completed. |
| 40 | S&F of stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with tinned tacks,or galvanised wire staples.or wooden beadings for doorscomplete all as specified and directed. |
| 41 | S&F ofin repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with tinned tacks,or galvanised wire staples.or wooden beadings for doorscomplete all as specified and directed. |
| 42 | S&F Framed work such as grills,gratings, etcwith ends of bars shouldered and/or riveted,or forged into spikes; framedguard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 |
| 43 | M&L brickwork with sub class B bricks straight or curved on plan exc 6mtr mean radius built in cement mortar 1:6 by using old size bricks complete. |
| 44 | M&L for brick work with sub class \"B\" bricks using old size bricks, straight or curved on plan to any radius, built in CM 1:4 as in half brick thick wall complete all as specified and directed. |
| 45 | M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar (1:6) finished even & fair. |
| 46 | M&L for rendering 20mm thick in cement mortar 1:4 in two layers of 10mm each using WPC in finishing layer on brick or concrete surfaces finished even & fair (WPC for finishing layer will be paid seperately as supply only). |
| 47 | M&L for 5mm thick in CM 1:3 in ceiling finishing the surfaces even and smooth without using extra cement. |
| 48 | Supply only integral water proofing compound. |
| 49 | M& l for two coat of acrylic distember on new wall surface including preperation of the surface all as directed and specified. |
| 50 | M&L for applying 1.0mm thick wall care putty on new or old wall surface all as directed and specified complete. |
| 51 | M&L applying two coats of weather proof exterior emulsion paint of standard quality and make ,over a coat of white primer including preparation of new /old wall surfaces complete all as specified and directed. |
| 52 | Taking up or downsteel water tubings and fittings etc complete and makinggood disturbed surfaces of walls/ceilings etc complete all as specified and as directedof following bore:-(a)Bore tubing 15mm |
| 53 | (b)Bore tubing 20mm |
| 54 | M & L for steel tubing medium grade,galvanised fitting fixed complete to walls and ceiling or floor complete for this following.(a) Bore tubing 15mm |
| 55 | (b) Bore tubing 20mm |
| 56 | S&F in repair 250mm long aluminium anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section complete. |
| 57 | S&F250mm long aluminium anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section complete. |
| 58 | M&L for 150 mm size aluminium anodised cast type handles. |
| 59 | M&L in repair 150 mm size aluminium anodised cast type handles. |
| 60 | S&F of 150mm long aluminium anodised,barrel tower bolt of extruded section. |
| 61 | S&F100mm size mild steel butt hinges medium weight. |
| 62 | S&F100mm size stainless steel butt hinges medium weight. |
| 63 | S&F in repairs ofPVC low level flushing cistern, 10 ltr capacity, syphonic action type white body with inlet ball valve, float , handle,bracket, longflush pipe of PVC to suit flushing cistern ( long bend) etc complete & connecting to WC (Make : Sleek of Hindware, Slimline of Parryware or equivalent as in the list of makes. |
| 64 | S&F in repairWater Closet (squatt pattern) of vitruous china squatting pan of pattern \"ORRISA\" pattern size 580 x 440 mm white with integral foot rests (excluding flushing cirstern and flush pipe) including connection to trap and flushing pipe anti syphon pipe etc complete including trap set in and incl concrete complete all as specified and directed. |
| 65 | S&F in repairVitreous china wash down water closet pan (pedesatal pattern) (EWC)white including plastic water closet seat cover closed pattern with flat bottom, and cover and mild steel chromium plated hinging divice etc complete fixed in repairs. |
| 66 | Supply and fixin repair CP Health Faucet of premium quality including two way bib cock and PVC telephonic flexible tube fixed to 15mm bore pipe. |
| 67 | S&F in repair wash hand basin, vitreous china, white, flat back (550x400mm) cutting for and pinning ends of brackets(Make:Parryware Code No.-0471,Indus Basin (white) or equivalent and waste fitting,brass chromium plated for glazed ware basin etc with long screwed shanks and fly nuts,flange end bedded in red lead cement and other end fixed 32mm including PVC waste pipe with CP /PTMTcoupling of required length. |
| 68 | S&F of PVC connections 15 mm size with PTMT nuts of length 600 mm. |
| 69 | S&F in repairs for 15 mm bore stop cocks fancy type, brass chromium platedall as specified. |
| 70 | S&Fin repairs bib taps 15mm bore fancy type brass chromium plated withfor iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 71 | S&F in repairs for 15 mm bore stop cocks fancy type, brass chromium platedfor iron pipe or for union etc as in repair. |
| 72 | S&F in repairs angle valve,fancy type chromium plated, brass, 15mm bore complete all as specified and directed. |
| 73 | Supply and fixed in repairs sinks without drainage board made of stainless steel 1mm thick sheet plugs, washers and waste pipe, including a pair of cantilever brackets embedded in wall with suitable size of PCC (1:3:6) type C-1 blocks and connecting union to pipe of overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm all complete as specified and as directed. |
| 74 | S&F in repair 1.00 mm thick stainless steel plate rack of size 31\"x30\"x10\" complete all as specified and directed. (Make - Model No BSKPR-314 of Blue Star or equivalent as in the list of makes. |
| 75 | Supply & fixing in repair of pillars taps,fancy type, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, scewed for iron pipe 15 mm bore |
| 76 | S&Ffor PVC (SWR) (Bore of pipe 110mm) pipes single socketed, in any length with rubber ring joints fixed to walls with necessary clamps, bolts etc complete all as directed by Engr-in-Charge. |
| 77 | S&F for PVC (SWR) bends any radius fixed to PVC Pipes/Steel Gutters etc complete all as directed by Engr-in-Charge (Bore of pipe 110mm) |
| 78 | M&L in repairs for CINahani trap with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1(diameter of outlet100mm) as in repair |
| 79 | M&L in repairs for PVC floor trap with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1(diameter of outlet100mm) as in repair |
| 80 | S&Ffor PVC (SWR) (Bore of pipe 75mm) pipes single socketed, in any length with rubber ring joints fixed to walls with necessary clamps, bolts etc complete all as directed by Engr-in-Charge. |
| 81 | S&F for PVC (SWR) bends any radius fixed to PVC Pipes/Steel Gutters etc complete all as directed by Engr-in-Charge (Bore of pipe 75mm) |
| 82 | S&F in repairs 600mm x 450 mm bevelled edge mirrorof selected quality, mounted on 6 mm thick AC plain building board and fixed to wall on wooden plugs with chromium plated brass screws and cup washers all complete as specified and as directed. |
| 83 | Material and labour for preparation of old plastered ceiling surfaces by brooming down or steel wire brushing: scrapping down smoke soot, mould, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash complete all as directed. |
| 84 | All as per item No 1.82 here-in-before but for wall surfaces. |
| 85 | M&L for three coat of white wash on walls on newly plastered surface incl preparation of surface. |
| 86 | M&L for applyingthree coat of white washing including preparation of new or previously untreated surface of ceiling. |
| 87 | Material & labour for preparation of old painted surfaces of wood & wood based materials over 10 cm width or girth and applying one coat of synthetic enamel paint completeall as directed by the Engr-in-Charge. |
| 88 | Material and labour for applying one coat of synthetic enamel paint on old painted steel and ironsurfaces of any description over 10 cm in width or girth includingnecessary preparation of surfaces. |
| 89 | Complete removal of existing treatment from plastered or unplastered surfaces of walls including cleaning with scrapers, any number of coats and any width or girth etc and applying two coats of oil bound distemper over a coat of primer oversuper fine Birla or altek putty finish as required and completeall as specified and as directed by the Engr-in-Charge. |
| 90 | Taking out old unserviceable GI Pipe of any size from site complete all as specified and as directed. Note :The Excavation and earth work shall be mesured and paid separately under relevant item of Schedule. |
| 91 | Supply and lay pipe galvanized, “Medium class”, including fittings 20 mm fixed complete to walls and ceiling or laid in floor all as specified and directed. |
| 92 | Supply and lay pipe galvanized, “Medium class”, including fittings 25 mm complete all as specified and directed. |
| 93 | Supply and lay pipe galvanized, “Medium class”, including fittings 40 mm all as specified and directed. |
| 94 | Supply and fix Gun metal ,globe Gate Valves with iron wheel head of 20 mm dia bore complete with all accessories all as specified and all as specified and directed. |
| 95 | Supply and fix Gun metal ,globe Gate Valves with iron wheel head of 25 mm dia bore complete with all accessories all as specified and all as specified and directed. |
| 96 | Supply and fix Gun metal ,globe Gate Valves with iron wheel head of 40 mm dia bore complete with all accessories all as specified and all as specified and directed. |
| 97 | M& L for cutting existing GI pipe alteration or addition of 40/50 mm dia bore for inerstion of reducer Teecomplete with all accessories all as specified and all as specified and directed. |
| 98 | Excavation in trenches in soft/loose soil not exc. 1.5 metre wide and not exc. 1.5 metre in depth and getting out for taking up / layingunder ground electric cable complete with all accessories all as specified and all as specified and directed. |
| 99 | Returning, filling in, including spreading levelling watering and well rammming in layers not exceeding 25 cms in depth complete with all accessories all as specified and all as specified and directed. |
| 100 | Removing excavated materials n.exc 50m and depositing were directed at a level n.exc. 1.5m abive the starting level |
| 101 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc for taking credit ( credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed. |
| 102 | M&L for point wiring with 1.5 sqmm single core PVC insulated unsheathed FR-LS cable 1100 volts grade (ISI marked) with multistranded copper conductor with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit and conduit accessories (ISI Marked) concealed in wall/fixed to roof, ceiling etc including provision of 1.5 sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LS (ISI Marked) with proper colour coding as earth continuity conductor connected to common earth dolly, modular sheet steel sunken terminal box of appropriate size suitable for modular switch/ fittings concealed in walls, with modular back plate, top cover fixed flush to wall for housing switches, socket outlets, fan regulators etc duly earthed including cutting chases of existing wall for for conduits and sinking for boxes and making good to the disturbed surface of wall/floor and matching with existing specifications. Connections of cable with MCB\"s or bus bar shall be done through proper size copper/brass thimbles all as specified and as directed (a) One light point controlled by one way switch 5/6 amps. |
| 103 | (b) \"-Ditto- all as per item No 2.01 above but for one ceiling fan/Exhaut fan point controlled by one way switch 5/6 amps. |
| 104 | (c) \"-Ditto- all as per item No 2.01 above but one socket out let 5/6 amps point on the independent board |
| 105 | (d) \"-Ditto- all as per item No 2.01 above but one socket out let 5/6 amps point on the same board |
| 106 | (e)\"-Ditto- all as per item No 2.01 above but one bell point controlled by one way switch 5/6 amps. |
| 107 | (f)\"-Ditto- all as per item No 2.01 above but one light point controlled by two way switch 5/6 amps. |
| 108 | \"-Ditto- all as per item No 102 above but for wiring with 2.5 sq mm single coremultistranded copper conductor for one socket out let 15/16 amps point on the independent board complete all as specified and directed |
| 109 | S&F switch piano flush type 5/6 amps single pole one way complete all as specified and directed. |
| 110 | S&F ofswitch piano type 2 way 5/6 Amp, 230 Volt, flush button single pole one way complete all as specified and directed by Engineer -in-Charge. |
| 111 | S&F switch piano flush type 15/16 amps single pole one way complete all as specified and directed. |
| 112 | S&F socket 2 in 1, 5 Pin, 5/6 amps, white ivory finish flash type complete all as specified and directed. |
| 113 | S&F of socket outlet 2 in 1, 5 Pin, 5/15 amp,multipurpose 230 volt flash type complete all as specified and directed. |
| 114 | S&Fbell/buzzer push 5/6 amps flush type white/ivory finish complete all as specified and directed. |
| 115 | S & F deluxe fan electronic regulator 230 volts AC 50 Hzs rotary step white/ivory finish complete all as specified and directed. |
| 116 | S&F in ceiling rose, bakelite, surface type, 220/240 volts, three terminals complete all as specified and directed. |
| 117 | S & F Bell Ding Dong, AC, 230 volts, single pole complete all as specified and directed. |
| 118 | S & F lamp holder, isolated body, with back plate suitable for batten/anglefittings complete all as specified and directed. |
| 119 | S&F IP 20, class I, LED light 1X18 W (or nearest next higher wattage) (4feet), 5700K, wall/ surface mounted, integrated type with aluminium housing and decorative and caps with integrated high efficiency electronic driver and surge suppressor of 2KV or more, luminaire efficiency > 95 lumens/watt, power factor > 0.90, operating range - 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/ square blocks, screws etc complete with all accessories internally prewired and connecting up with and including necessary taking down the old unserviceable fitting complete all as specified. |
| 120 | Refixing only LED Tube light of any watt on wall/surface mountedfixed with 02 Nos of PVC round/ square blocks, screws etc complete all as specified. |
| 121 | S&F IP 20, Class I, LED Mirror light fitting 1 x 10 W, (or nearest next higher wattage) 5700 K, wall /Surface mounted with aluminium housing 2 feet long, integrated type, with high efficiency PMMA diffuser,integrated high efficiency electronic driver & surge suppressor of 2 KV or more, luminaire efficacy > 95 lumens/Watt, power factor >/ 0.90, operating range – 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/square blocks, screws etc complete including 01 No 10 W LED lamp with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size including necessary taking down the old unserviceable fitting complete all as specified. |
| 122 | Refixing only LED Tube light of any watt on wall/surface mountedfixed with 02 Nos of PVC round/ square blocks, screws etc complete all as specified. |
| 123 | S & F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 35 watts with pre wired andnecessary mounting arrangements, provision of new 3 core multistrandedcopper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape complete incl removal of old unsv fitting all as all as specified and directed. |
| 124 | Taking down carefully Ceiling fan from its original position and keep in safe custody for refixing / hanging after B/R plaster work complete all as specified and directed. |
| 125 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. |
| 126 | Materialand labour for concealed sub-main wiring alongwith earth wire of size of 2 x 4.0 sq. mm + 1 x 4.0 sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including PVC rigid conduit (medium grade) of of size not less than 25 mm with all fittings and accessories ISI marked including cutting chases for conduits &making good to walls, floors etc complete, including taking down old unsv aluminium submain wiring all as specified and as directed. NOTE: Two runs of 4 sqmm conductor for main and one run of 4 sqmm conductor as earth wire with proper colour coding including one run run of PVC conduit shall be measured as one unit length. Connections of cables wit MCBs or bus bar shall be done through appropriate size brass/ copper thimbles |
| 127 | S&F Sheet metal enclosure for 4 way Distribution Boards (DB’s), double door, Triple pole & neutral with 200 amps rated bus bar, 415Volt IP-20 protection suitable for fixing MCB\"S/lsolators with andincluding taking down old one complete all as specified and directed. |
| 128 | S&F MCB distribution boards (DBs) with sheet metal enclosure, double door, IP 43 protection, 240 Volts, 8 way, single pole and neutral, with 200 Amps rated copper bus bar (as per OEM), neutral link, ertth link earthing studs, suitable for fixing MCBs, without MCBs fixed flush to wall/other surface complete all as specified and as directed. |
| 129 | S&F MCB, Triple pole & neutral 63/100 amps, 240 volts, ‘C’ curve, 10KAcomplete all as specified and as directed. Make :L & T ,Cat No: BB40630C or equivalent as in the list of makes. |
| 130 | S&F MCB, Single pole & neutral 6 to32 amps, 240 volts, ‘C’ curve, 10 KAall completeincluding taking down the old one complete all as specified and directed. |
| 131 | S&F MCB, Single pole, 5 to32 amps, 240 volts, ‘C’ curve, 10 KAall complete with and including taking down old unsv one as specified and as directed. |
| 132 | M & L for sheet metal enclosure fabricated out of 2.0 mm thick CRCA sheet, totally enclosed type, dust & vermin proof, with suitable sized supporting MS angles & suitable openings at top & bottom for entry of outgoing / incomming cables, fixed with nuts & bolts & front side openable with hinged shutter with suitable locking arrangement duly painted with 2 coats of powder coated paint over a coat of red oxide primer (spray paint) with minimum dimensions (90 x 75 x 20 cm ) flush to wall for incorporating 01 No TPN DB, 05 Nos electronic meters etc complete all as specified and as directed. |
| 133 | M & L for sheet metal enclosure fabricated out of 2.0 mm thick CRCA sheet, totally enclosed type, dust & vermin proof, with suitable sized supporting MS angles & suitable openings at top & bottom for entry of outgoing / incomming cables, fixed with nuts & bolts & front side openable with hinged shutter with suitable locking arrangement duly painted with 2 coats of powder coated paint over a coat of red oxide primer (spray paint) with minimum dimensions (120 x 90 x 20 cm ) flush to wall for incorporating 01 No TPN DB, 09 Nos electronic meters etc complete all as specified and as directed. |
| 134 | Material and labour for earthing complete with galvanized steel plate electrodes of size600x600x6mm thick burried directly in ground with earth pit not less than 2.25 meter deep below normal ground level with top edge of plate not less than 1.5 meter below normal ground level connected to galvanised wire 4.00 mm earth lead by means of nuts, bolts, checknuts and washers including 15 mm bore galvanized iron pipe, medium grade for protection of earth lead upto the length of 7.5 meter towards test terminal and 20 mm bore galvanized iron pipe, medium grade for watering, and providing of charcoal and common salt in alternate layers, includig necessary earth work in any type of soil and including PCC pit in PCC 1:2:4 with provision of wire mesh and funnel, complete all as shown in electrical plate No 5 of SSR Part- I including testing on completion all as directed and as specified. |
| 135 | Taking down Electric meter single phase any capacity/size disconnecting electrical connections and refixing the same all as directed |
| 136 | Supply and fixing Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings of rating 230 volt suitable for pin type lamp fitting complete all as specified and directed. Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule \"A\"/BOQ. |
AI Tender Summary
Tender Timeline
Feb 19, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedMar 12, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 14, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender