Periodic Maintenance On Matyara Hawani Ransal Road Km 0/00To 2/00(Sh: P/L Tack Coat, Mix Seal Coat 25 Mm Thick Including Profile Correction In Km 0/0 To 2/0)
Tender Value
21.44 Lakhs
Estimated cost
Bid Submission
26 Feb 2024
0 days left
EMD
42900
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
sarkaghat → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Periodic Maintenance On Matyara Hawani Ransal Road Km 0 / 00To 2 / 00 ( Sh: P / L Tack Coat, Mix Seal Coat 25 Mm Thick Including Profile Correction In Km 0 / 0 To 2 / 0 )
BOQ
| Sl. No. | Item Description |
| 1 | Providing, laying, spreading and compacting stone aggregates of 53mm to 22.5mm (fifty three millimetre to twenty two point five millimetre) nominal size to water bound macadam specifications including laying in uniform thickness, hand packing, rolling with smooth wheel roller 80-100kN in stages to proper grade and camber, applying and brooming, stone screening and binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density grading-III as per technical specifications clause 405 by manual meansincludingall leads, lifts and carriage of materials and as per the directions of the Engineer-in-Charge. |
| 2 | Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm (Zero decimal seven zero to one kilogramme per square metre)using mechanical means as per Technical Specification Clause 502 including haulage of materials with in all leads, lifts and carriage of materials and as per the directions of the Engineer-in-Charge. |
| 3 | Providing and applying tack coat with Bitumen emulsion (RS-1) of approved manufacturerusing emulsion distributor at the rate of 0.25 to 0.30 kg per sqm(Zero decimal two five to zero decimalthree zero kilogramme per kilogramme per square metre) on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503 including all leads, lifts and carriage of materials and as per the directions of the Engineer-in-Charge. |
| 4 | Providing, laying and rolling of close-graded premix surfacing material of 25 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) @c 0.338kg per Ten Square metre aggregates using penetration grade bitumen@ i.e binder content @ 27.50kg per Ten square metre or 5.11% by weight and minium density of MSS should 20.10gm/cc to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509 includingall leads, lifts and carriage of materials and as per entire satisfactionof the Engineer-in-Charge. |
AI Tender Summary
Tender Timeline
Feb 19, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 26, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 27, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender