Delhi University has published Tender For Day To Day Complaints, Arts Faculty, Director Office, Pmb, S P Jain Centre, Aravali Hostel, Biotech Block, Sdc. Submission Date for this Tender is 28-02-2024. Civil Work Tenders in New Delhi Delhi. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 2 | Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete 25 mm dia |
| 3 | Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete With 12 mm mild steel U beading |
| 4 | Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC "C" channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on theinterior side of the "C" Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer"s specification & drawing.30 mm thick plain PVC door shutters |
| 5 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality 1.0 mm thick |
| 6 | Repair of door / window steel or wood as per requirement with necessary fittings etc complete |
| 7 | Repair of booster pump line i/c all fittings and taking out booster pump etc |
| 8 | Providing and fixing mixer for bathroom |
| 9 | Providing and fixing jet/ hand facet |
| 10 | Pressure jetting the water line |
| 11 | Repair of mixer i/c copper connection etc |
| 12 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. |
| 13 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent |
| 14 | Distempering with 1st quality acrylic distemper of approved manufacturer of required shade, two or more coats i/c removing dry or oil bound distemper water proofing cement paint and the like by scrapping sand papering, P/A white cement based putty over the wall surface and primer on wall surface etc complete in all respect to get a smooth and even finish as directed by the Engineer-in-charge |
| 15 | Accrocrete painting on wall damaged/ seepage affected i/c necessary repair functions i/c cutting welding necessary pipes |
| 16 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) |
| 17 | Provoding and fixing door closer of approved quality |
| 18 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid |
| 19 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32 mm dia |
| 20 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost ofcutting and making good the walls and floors :100 mm inlet and 100 mm outlet Sand cast iron S&S as per IS: 3989 |
| 21 | Repair of sink / wsah basin by taking out and refixing 1st floor lab at Engineering Office building i/c cost of waste jali and pipe etc |
| 22 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall |
| 23 | 25 mm nominal dia Pipes |
| 24 | 40 mm nominal dia Pipes |
| 25 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore |
| 26 | Providing and fixing gun metal non- return valve of approved quality (screwed end) :25 mm nominal boreHorizontal |
| 27 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore |
| 28 | P/F PVC pipe ( Prakash) 3" to 4" i/c PVC traps and all connections etc for sanitary and drinage purpose |
| 29 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.With stainless steel cover plate minimum 1.25 mm thickness |
| 30 | Covering the exterior portion of to preent entry of rain water with CPVC sheet and aluminu section etc up 21 etc |
| 31 | Providing and fixing fancing shower rose and arm |
| 32 | Making wooden shutter covering under kitchen slab with 19 mm board, sunmica, painting frame etc complete i/c P/F complete |
| 33 | Repair of aluminum window opening and P/F new rubber gasket etc handle etc complete |
| 34 | Providing and fixing two in one water tap for multi purpose 15 mm |
| 35 | Providing and fixing PVC connection of required tanks 30 cm to 60 cm long |
| 36 | Providing and fixing swan neck pillar cock single |
| 37 | Providing and fixing PTMT socket and other GI nipple etc complete |
| 38 | Providing and fixing door fittings like T hole, sliding bolt and hanle etc |
| 39 | Taking out the damaged line by excavtion and checking the leakage etc as directed to get new water connection |
| 40 | Flash tank repair i/c handle, psyyphone |
| 41 | Checking seepage from the toilet i/c grouting the traps whoite cementing etc complete |
| 42 | Opening and taking out auto clave line and providing new GI line etc as directed |
| 43 | Seperating the store and room by providing 12 mm and aluminium section etc as directed fixed portion |
| 44 | Seperating the store and room by providing 12 mm and aluminium section etc as directedgrill portion |
| 45 | Taking out the aluminum door and changing the bottom section and refixing the same in new portion as directed |
| 46 | Repair of out side loose concrete by providing new CC flooring etc out side back gate |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
