smart city mission has published Tender For Re-Design Of Helibase With Night Landing Facilities At Kavaratti Island, Lakshadweep (Second Call). Submission Date for this Tender is 12-03-2024. Helipad Tenders in kavaratti Lakshadweep. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 06-Mar-2024 | Corrigendum-1 | Other | 12-03-2024 |
Sl. No. | Item Description |
1 | Providing and applying tack coat using hot straight run bitumen of grade VG - 30, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications : on bituminous surface@ 0.50 kg/sqm |
2 | Providing and filling in position rubberized bitumen hot sealing compound for sealing of expansion jointsin roads / pavements all complete as per direction of the Engineer-in-Charge. |
3 | Painting road surface marking with adequate nos of coats to give uniform finish with ready mixed road marking paint conforming to IS : 164, on bituminous/concrete surface in white/yellow shade, including cleaning the surface of all dirt, scales, oil, grease and foreign material etc. complete. |
4 | New work (Two or more coats) Road |
5 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per |
6 | direction of Engineer-in-charge (length of finished kerb edging shall |
7 | be measured for payment). (Precast C.C. kerb stone shall be approved |
8 | by Engineer-in-charge). All roads |
9 | "Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge." 60mm Paver Block |
10 | TOTAL |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail