Military Engineer Services-MES has published Tender For Special Repair To Concrete Floor And Steel Doors For Stowage Of K-Loader At Ins Dega. Submission Date for this Tender is 16-03-2024. Earth Moving Machinery Tenders in visakhapatnam Andhra Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 09-Mar-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 16-03-2024 |
| Sl. No. | Item Description |
| 1 | Schedule "A" Part -I |
| 2 | Excavating in soft/loose soil over areas, n exc 1.5 m deep and getting out complete all as specified and directed. |
| 3 | M&L for hard core of gauge n.exc 63 mm and deposited spread and levelled in layers n. exc 15 cm thick , watered and rolled / rammed to a true surface with broken stone or boulders complete all as specified and directed by Engr-In-Charge. |
| 4 | M&L for cement concrete in foundation, filling and mass concrete type C-2, 1:3:6 using 40mm graded aggregate as in foundation and as PCC band at ground level complete all as specified. |
| 5 | M&L for brickwork with flyash bricks straight or curved on plan exc 6 m mean radius old size bricks built in Cement mortar 1:6, using old size brick complete all as specified and directed by Engr-In-Charge. |
| 6 | M&L for 125 mm thick cement concrete type B-2, 1:2:4 (using 40mm graded aggregate) finished surface even and roughcomplete all as specified and as directed. |
| 7 | M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Gradecomplete all as specified and as directed. |
| 8 | M&L for Sand filling under floors or in foundations including watering and consolidationcomplete all as specified and as directed. |
| 9 | M&L for 15 mm thick rendering on other than fair faces of brickwork in CM(1:6) finished fair & even complete all as specifed and as directed by Engineer-in-charge. |
| 10 | M&L for three coats of white washing on walls including preparing new plastered surfaces complete all as specified and as directed by Engineer-in-Charge. |
| 11 | M&L For Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ complete all as specified and as directed. |
| 12 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed. |
| 13 | M&L for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails,braces,ect., complete, drilled for fixing of steel sheeting or other covering.Doors, ect. To be prepared for hanging or sliding with and including either hooks and hinges or steel hinging door fittings (exclusive of steel sheeting or other covering, running rails and guids) and hanging; also fasting and fixing complete all as specified and as directed by Engineer-in charge |
| 14 | S&F in repair for mild steel work as in bands, straps, hold fasts, stiffiners for fancing posts, struts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, and similar small articles conforming to Fe-290 Gde-E-165 including dismantling existing structural steel work complete all as specified and as directed. |
| 15 | S&F 1.60 mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required |
| 16 | S&F in repair Powder coating anodised aluminium frame for doors, windows, ventilatiors with one or more rebtes including joining cleat for fixing etc. complete all as specified. (Minimum thickness of powder coating 50 micron). |
| 17 | S&F powder coated anodised aluminium window and ventilator shutters , side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazings clips rubber packing anodised aluminium snap beading, screws , anodised aluminium fittings such as peg stays 150 mm long (1no), hinges type B-21 100mm long (2no) suitable handle (1 no) and thickness of powder coating not less than 50 micron complete all as specified and as directed. |
| 18 | S & F in repairs 12mm thick Prelaminated particle board, exterior grade, prelaminated on both sides with decorative choice lamination fixed with screws to timber frame work complete all as specified and directed. |
| 19 | Taking down chowkat with shutter (without taking off shutters from the frame) exc 1.5 Sqm but n exc 4.0 sqm each complete all as specified and as directed. |
| 20 | Dismantling Structural steel work including doors, gates but excluding framed truss etc. |
| 21 | M&L for two coats of synthetic enamel paint on new steel surface exc 10 cm width or girth on 01 coat of primer (Red oxide Zinc chrome) incl preparation of new surfaces complete. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
