Military Engineer Services-MES has published Tender For Repair Of Steel Wooden And Tp Furniture At Otm And Married Accommodations At Paradip Station. Submission Date for this Tender is 16-03-2024. Furnitures Tenders in paradip Odisha. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 09-Mar-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 16-03-2024 |
| Sl. No. | Item Description |
| 1 | Repairs to"Office Table with 03 drawer Of Size 1200 X 600 mm with prelaminated particle Board Top (Equivalent to FD-1004) &Table Office clerk steel (FD-1004 ) and replacement of components as shown in drawing complete all as specified and directed by Engin-Charge:- |
| 2 | Material & labourfor removing of old unserviceable top then supply and fixing of Exterior Grade Teak wood finish 18 mm thick prelaminated particle board of size (1200 X 600) mmtop including polished 4 mm thick teak wood beading all roung the top of table as per drawing complete all as specified and directed by Engin-Charge:-. |
| 3 | All as per Item No. 1.01 above but only drawer box (Excluding drawers)of over all size (350 X 430 X 570 mm) with central locking system as per drawing made ofMS sheet of20 gauge includingapply of one coat of red oxide primer and one coat of spray paint as per drg complete all as specified and directed complete all as per exits in drawing as specified and directed by Engr-in-charge. |
| 4 | All as per Item No. 1.01 above but of a single drawer made ofMS sheet of20 gauge includingapply of one coat of red oxide primerand one coat of spray painting as per drg complete all as specified and directed complete all as per exits in drawing as specified and directed by Engr-in-charge. |
| 5 | Repairs to"Office Table with 03 drawer Of Size 1500 X 900 mm with prelaminated particle Board Top (Equivalent to FD-1002) &Table Office Officer Steel (FD-1002 ) and replacement of components as shown in drawing complete all as specified and directed by Engin-Charge:- |
| 6 | Material & labourfor removing of old unserviceable top then supply and fixing of Exterior Grade Teak wood finish 18 mm thick prelaminated particle board of size (1500X900) mmtop including polished 4 mm thick teak wood beading all roung the top of table as per drawing complete all as specified and directed by Engr-in-Charge:- |
| 7 | All as per Item No. 2.01 above but of a single drawer made ofMS sheet of20 gauge includingapply of one coat of red oxide primer as per drg complete all as specified and directed complete all as per exits in drawing as specified and directed by Engr-in-charge. |
| 8 | Repairs to " Teapoy Varandha Steel (Drg No : FD/E6/MAP/17) & replacement of following components as shown on drgcomplete all as specified and directed by Engineer-in-Charge :- |
| 9 | Material & labourfor removing of old unserviceable top then supply and fixing of Exterior Grade Teak wood finish 18 mm thick prelaminated particle board of size (400X700) mmtop including polished 4 mm thick teak wood beading all roung the top of table as per drawing complete all as specified and directed by Engin-Charge:-. |
| 10 | Repairs to "Almirah Steel Large/small with shelves (Drg No FD-1031/FD-1032)" & replacement of following components as shown on drgcomplete all as specified and directed Eng-in-Charge :- |
| 11 | Material & labour for replacement of old unserviceable legs of Size (100 X 440 X 75mm) made of 1mm thick MSSheetapply of a coat of red oxide primer and one coat of spray painting as per drawing as per esisting shade or as directed. |
| 12 | S&F in replacement of two way locking system with MS rod (with out Lock) . |
| 13 | S&F in replacement of150 mm long chromium plated mild steel handles complete all as specified as directed Eng-in-Charge. |
| 14 | Repairs to " Almirah Steel Small with shelves (Drg No FD-1032) " & replacement of following components as shown on drgcomplete all as specified and directed :- |
| 15 | Material & labour for replacement of old unserviceable legs of Size (100 X 440 X 75mm) made of 1mm thick MSSheetapply of one coat of red oxide primer as per drawing. |
| 16 | S&F in replacement of two way locking system with MS rod (with out Lock) |
| 17 | S&F in replacement of 150 mm long chromium plated mild steel handles complete all as specified as directed Engr-in-Charge. |
| 18 | Repairs to " Chair Varandha Steel (Drg No : FD/MAP-II/06) " & replacement of following components as shown on drgcomplete all as specified and directed :- |
| 19 | Removing US PVC Back & seat (As per drawing ) with 4MM TH. (RIBS ON BACK SIDE) (weight not less than 1.5 Kgs Each), M&L for refixing the new seat as per drawing as specified anddirected by Engr-in-Charge. |
| 20 | Removing of broken / damaged / decayedpart of steel furniture made of 20 mm dia MS tube then supply and refix new 20 mm dia MS tube having wall thickness of 1.6 mm as applicable to the furniture as per drawing with necessary bending and welding including and including a coat of spray paint over a coat of red oxide primer on replaced steel surfaces complete all as specified and directed |
| 21 | Supply and fixing (welding as per standard workmanship) of 02 nos of 10 mm thick MS rod of 455 mm long (+- 5 mm) to side rails of seat at equal distance including a coat of red oxide primer and one coat of brush paint on steel surfaces and joints complete all as specified and directed |
| 22 | Repairs to " Chair Varandha Steel (Drg No : FD-359) " & replacement of following components as shown on drgcomplete all as specified and directed :- |
| 23 | S & F for replacement of old unserviceable plastic newar / Plastic cane of varandah Chairwith plastic cane of 4 mm wide white in colour of semi circular type with border of 4 mm wide plastic cane weaving as per mat pattern &complete all as specified and directed. |
| 24 | Removing of broken / damaged / decayedpart of steel furniture made of 20 mm dia MS tube then supply and refix new 20 mm dia MS tube having wall thickness of 1.6 mm as applicable to the furniture as per drawing with necessary bending and welding including and including a coat of spray paint over a coat of red oxide primer on replaced steel surfaces complete all as specified and directed |
| 25 | Repairs to " Bed Hard Steel (FD: E6/MAP/08/(R) " & replacement of following components as shown on drgcomplete all as specified and directed :- |
| 26 | Material & labour for replacement of old unserviceable 12 mm BWR ply of size (850 X 1974)mm including necessary fittings. |
| 27 | Repairs to " Charpoy with hard top (FD: ED/MAP-II/01 " & replacement of following components as shown on drgcomplete all as specified and directed :- |
| 28 | Material & labour for replacement of old unserviceable 12 mm BWR ply of size (838 X 1916)mm including necessary nuts and bolts as per drawing, Complete all as specified and directed. |
| 29 | Cutting and removing of broken / damaged / decayed part of Charpoy made of 32 Sq mm MS tube then supply and fixing of new 32 Sqmm MS tube having wall thickness of 16 gause, as applicable to the furniture as per drawing with with necessary welding including refixing of serviceable parts and including a coat of red oxide primer on replaced steel surfaces complete all as specified and directed. |
| 30 | Cutting and removing of broken / damaged / decayed part of Charpoy made of 25 X 65 mm MS tube then supply and fixing of new 25 X 65mm MS tube having wall thickness of 16 gause, as applicable to the furniture as per drawing with with necessary welding including refixing of serviceable parts and including a coat of red oxide primer on replaced steel surfaces complete all as specified and directed. |
| 31 | Cutting and removing of broken / damaged / decayed part of Charpoy made of 25 Sq mm MS tube then supply and fixing of new 25 Sqmm MS tube having wall thickness of 16 gause, as applicable to the furniture as per drawing with with necessary welding including refixing of serviceable parts and including a coat of red oxide primer on replaced steel surfaces complete all as specified and directed. |
| 32 | S & Fix 80 mm GI nuts and bolts for Charpy with hard top & Bed hard Steel in replacement of US, complete all as specified and directed by Eng-in-Charg. |
| 33 | Repairs to " Chair writing steel (FD: ED/E6/MAP/12 " & replacement of following components as shown on drgcomplete all as specified and directed :- |
| 34 | Supply and fixing of seat of chair writing as per existing shape and size as per drawing, complete all as specified and directed. |
| 35 | MS frame of Chair writing with shoes |
| 36 | Material & labour for replacement of old unserviceable Hand rest as per drawing with necessary fittings |
| 37 | S&F Rubber stopper for25 X 10 mm cantilever type MS tube. |
| 38 | Repairs to " Chair Computer (FD: ED/E6/MAP/12) "and revolving chairs (TP) (Equivalent to Chair Computer )& replacement of following components as shown on drgcomplete all as specified and directed :- |
| 39 | Material & labour for replacement of old unserviceable Hand rest as per drawing with necessary fittings |
| 40 | S&F Hydraulic System |
| 41 | S&F PVC Bottom base with wheels. |
| 42 | Repairs to "Table bed side (Drg No FD/E6/MAP/15 (R) " & replacement of following components as shown on drgcomplete all as specified and directed :- |
| 43 | S&F for replacement of old unserviceable parts of the furniture of 18 mm thick pre laminated particle board of teakwood face OSD exterior grade with 4mm th well polished teak wood beading, complete all as specified and directed. |
| 44 | S&F for replacement of old unserviceable fancy handel with new SS handel. |
| 45 | S&F in replacement of 06 mm BWR back ply of size (400 X 420) mm |
| 46 | Repairs to "Table Steel 900 X 600 (Drg No FD-1007, FD-1008) " & replacement of following components as shown on drgcomplete all as specified and directed :- |
| 47 | S & Ffor replacement of old unserviceable withnew Top ( 600 X 900 mm) of 18 mm thick pre laminated particle board of teakwood face OSD exterior grade with 4mm th well polished teak wood beading all roung , all as per drawing complete all as specified and directed. |
| 48 | M&L for replacement of broken / damaged part of steel furniture made of 24 Sq mm pipe and S&F new 24 Sqmm pipe having wall thickness of 1.6 mm, as applicable to subject furniture as per drawing with necessary bending and welding including removing and refixing to serviceable parts and including a coat of red oxide primer on replaced steel surfaces complete all as specified and directed. |
| 49 | Sch "A" Part-II (Repairs to wooden furniture):- Repairs to " Table Centre Drawing No FD- 274" & replacement of following components as shown on drgcomplete all as specified and directed :- |
| 50 | S & Ffor replacement of old unserviceable withnew Top ( 900 X 450 mm) of 18 mm thick pre-laminated praticale board OSD exterior grade one side teak woo decorative face and another side balancing white including 4 mm thick teakwood beading all round , all as per drawing complete all as specified and directed. |
| 51 | Repairs to "Chair Dining Officers (Drg No : FD/MAP-II/04)" & replacement of following components as shown on drgcomplete all as specified and directed :- |
| 52 | S & F for replacement of old unserviceable 75 mm thick 40 Density cushion of size 450 X 450 mm along with the leatherised rexine fabric costing not less than Rs 350/- per meter along with re fixing with the plywood at bottom as per drawing all as specified and directed by Eng-ic-charge. |
| 53 | Repairs to "Chair Dining OR (Drg No : FD-279 /228)" & replacement of following components as shown on drgcomplete all as specified and directed :- |
| 54 | S & F for replacement of old unserviceable plastic cane of Dining Chairof any typewith plastic cane of 2 mm wide white in colour of semi circular type with border of 4 mm wide plastic cane weaving as per Godrej pattern &complete all as specified and directed. |
| 55 | Repairs to "Chair Dining OR (Drg No : FD/E6/MAP/05)" & replacement of following components as shown on drgcomplete all as specified and directed :- |
| 56 | M&L for removing of Old unserviceable PVC Seat ofdiining Chair then S & F new PVC Seat with necessary stainless steel screws complete all as specified and directed. |
| 57 | M&L for two new 440 X 25 X 3 mmflat iron plate (Single brush painted over a coat of red oxide primer) with two holes at each end to the side rails of dining chair after minor cutting of the PVC seat for adjustment after bending at required length including 08 nos of 1 inch stainless steel screws and washer at the bottom of PVC seat of the chair complete all as specified and directed. |
| 58 | Repairs to " Table dining 6 person (Drg No FD/ MAP-II/03)" & replacement of following components as shown on drgcomplete all as specified and directed :- |
| 59 | S & Ffor replacement of old unserviceable withnew Top ( 1500 X 900 mm) of 18 mm thick pre laminated particle board of teakwood face OSD exterior grade with 4mm thick well polished teak wood beading all round , all as per drawing complete all as specified and directed. |
| 60 | Repairs to " Table dining 4 person (Drg No FD/ MAP-II/03)" & replacement of following components as shown on drgcomplete all as specified and directed :- |
| 61 | S & Ffor replacement of old unserviceable withnew Top ( 1200 X 900 mm) of 18 mm thick pre laminated particle board of teakwood face OSD exterior grade with 4mm thick well polished teak wood beading all round , all as per drawing complete all as specified and directed. |
| 62 | Repairs to " TablePeg (Drg No FD-384) " & replacement of following components as shown on drgcomplete all as specified and directed :- |
| 63 | S & Ffor replacement of old unserviceable withnew Top ( 450 X 300 mm) of 18 mm thick pre laminated particle board of teakwood face OSD exterior grade with 4mm thick well polished teak wood beading all round , all as per drawing complete all as specified and directed. |
| 64 | M&L for replacement of leg of 1st class seasoned teak wood of Size30 X 50 X 380 mm. |
| 65 | S&F in replacement of long rail of seasoned teak wood of size 20X40X450 mm. |
| 66 | S&F in replacement of new short rail / Bottom rail of seasoned teak wood of size 20X40X380 mm. |
| 67 | Repairs to "Teapoy (Drg No FD-382) " & replacement of following components as shown on drgcomplete all as specified and directed :- |
| 68 | S & Ffor replacement of old unserviceable withnew Top ( 450 X 600 mm) of 18 mm thick pre laminated particle board of teakwood face OSD exterior grade with 4mm th well polished teak wood beading all round , all as per drawing complete all as specified and directed. |
| 69 | Repairs to "Table bed side (Drg No FD-76" & replacement of following components as shown on drgcomplete all as specified and directed :- |
| 70 | S&F for replacement of old unserviceable with new side of 18 mm thick pre laminated particle board one side decorative face and other side balancing white face OSD exterior gradeof size 510 X 230 mm with 4mm teakwood beading 510 mm long, complete all as specified and directed. |
| 71 | S&F for replacement of old unserviceable with new top/middle self / bottom of 18 mm thick pre laminated particle board one side decorative face and other side balancing white face OSD exterior gradeof size 450 X 230 with 4mm teakwood beading 450 mm long, complete all as specified and directed. |
| 72 | S&F in replacement of 06 mm thick BWR back ply of size (510 X 450) mm |
| 73 | Repairs to "Table writing (Drg No : FD-275)" & replacement of following components as shown on drgcomplete all as specified and directed :- |
| 74 | S & Ffor replacement of old unserviceable withnew Top ( 1145X 600 mm) of 18 mm thick pre-laminated praticale board OSD exterior grade one side teak woo decorative face and another side balancing white including 4 mm thick polished teakwood beading all roung , all as per drawing complete all as specified and directed. |
| 75 | S&F for replacement of old unserviceable parts of the furniture of 6 mm thick BWR Plywood, complete all as specified and directed. |
| 76 | Repairs to " Teapoy Varandah FD-383)" & replacement of following components as shown on drgcomplete all as specified and directed :- |
| 77 | S & Ffor replacement of old unserviceable withnew Top ( 450 X 900 mm) of 18 mm thick pre-laminated praticale board OSD exterior grade one side teak wood decorative face and another side balancing white including 4 mm thick polished teakwood beading all roung , all as per drawing complete all as specified and directed. |
| 78 | Removing of broken / damaged part of steel furniture made of 20 mm dia MS tube and S&F new 20 mm dia MS tube having wall thickness of 1.6 mm, as applicable to subject furniture as per drawing with necessary bending and welding including removing and refixing of serviceable parts and including a coat of red oxide primer on replaced steel surfaces complete all as specified and directed |
| 79 | Removing of broken / damaged part of steel furniture made of 25 X 3 Flat Iron of rectangular shape as 800 X 250 mm and S&F new as size and shapementioned, as applicable to furniture as per drawing with necessary bending and welding including removing and refixing of serviceable parts and including a coat of red oxide primer on replaced steel surfaces complete all as specified and directed |
| 80 | Repairs to " Chair Easy (Drg No FD-229)" & replacement of following components as shown on drgcomplete all as specified and directed :- |
| 81 | S & Ffor replacement of old unserviceable plastic cane of seat/back of Chair Easythen weave with plastic cane of 2 mm wide white in colour of semi circular type with border of 4 mm wide plastic cane weaving at Godrej pattern complete all as specified and directed. |
| 82 | Repairs to " Chair Writing (Drg No FD-280)"& replacement of following components as shown on drgcomplete all as specified and directed :- |
| 83 | S & Ffor replacement of old unserviceable plastic cane of seat of Chair Writingthen weave withplastic cane of 2 mm wide white in colour of semi circular type with border of 4 mm wide plastic cane weaving at Godrej pattern complete all as specified and directed. |
| 84 | Supply , fixing & setting of 100 mm thick (40 density) foam cusion (Kurlon /Sleepwell/ Feather Foam) for seat of Sofa set four / five / single seater(FD-281,FD/MAP-II/02) of approved quality as per Drg, complete all as specified and directed. |
| 85 | Supply , fixing & setting ofcover of cushion of size 21" X 22" X 4" made of tapestry cloth(Costing not less than Rs 320 per meter) of approved quality and providing zip excluding one side for each seat of Sofa set (FD-281,FD/MAP-II/02), including removing old covers as per Drg complete all as specified and directed. |
| 86 | M&L for replacement of 6 mm BWR ply to subject furniture as per drawing complete all as specifice and directed. |
| 87 | S&F for replacement of old unserviceable with newStainless Steel Pegs (Minimum 120 mm long) complete all as specified and directed. |
| 88 | Material & labour for fixing of4 mm thick teak wood beading to exposed surface of 18 mm thick prelaminated particle board of subject furniture includingpolishing complete all as specified and directed. |
| 89 | Material & labour for replacement of"Nylon Buffers " ofWooden furniture (Chair Dining offr, Chair Easy,Teapoy, Table Centre, Table Peg, Table dining, Table card etc ) includingscrews complete all as specified and directed. |
| 90 | Material & labour for fixing of" 75 mm fancy SS handels " to be fixed from inner side with secres & washer to subjected furniture ( Table Bed Side, Side Board and Bin Solid etc) includingscrews complete all as specified and directed. |
| 91 | Material & labour for fixing of" 100 mm long stainless Steel handel" to be fixed with secrews to thefurniture ( Side Board and Bin Solid etc) includingscrews complete all as specified and directed. |
| 92 | Material & labour for fixing of" 70 X 70 X 30 mm wooden cornerafter polishing with 02 Nos of screws" to various woodenfurniture (Chair Dining, Chair Dining Officers, Chair Writing, Table Writing, Dining Table etc), complete all as specified and directed. |
| 93 | M&L for replacement of 18 mm thick prelaminated particle board exterior grade teak wood finish to subject furniture as per drawing complete all as specifice and directed. |
| 94 | M&L for removing old paint using mechanical grinder and from following steel furniture and apply one coat of spray painting ofsynthetic enamel paint (Colour as decided by Eng-in-Charge) over a coat of red oxide primer as per drg complete all as specified and directed :- |
| 95 | All as per item No 37.01 above but for "Office Table with 03 drawer Of Size 1200 X 600 mm with prelaminated particle Board Top (Equivalent to FD-1004) &Table Office clerk steel (FD-1004 ) |
| 96 | All as per item No 37.01 above but for "Office Table with 03 drawer Of Size 1500 X 900 mm with prelaminated particle Board Top (Equivalent to FD-1002) &Table Office Officer Steel (FD-1002 ) |
| 97 | All as per item No 37.01 above but for " Almirah Steel Large with shelves (Drg No FD-1031)" |
| 98 | All as per item No 37.01 above but for" Almirah Steel Small with shelves (Drg No FD-1032) " |
| 99 | All as per item No 37.01 above but for" Locker Steel ( Drg No : CWE(P)V/SK/18) " |
| 100 | All as per item No 37.01 above but for " Teapoy Varandha Steel (Drg No : FD/E6/MAP/17)" |
| 101 | All as per item No 37.01 above but for" Chair Varandha (Drg No : FD/MAP-II/06) " & " Chair Varandha (Drg No : FD-359) " |
| 102 | All as per item No 37.01 above but for" Metal Shelving Racks of Size 1875 X 900 X 500 mm" |
| 103 | All as per item No 37.01 above but for" Side rack with Tray " |
| 104 | All as per item No 37.01 above but for" Table with drawer 600 X 900 FD-1008 " |
| 105 | All as per item No 37.01 above but for" Table without drawer 600 X 900 FD-1007 " |
| 106 | All as per item No 37.01 above but for" Rack Shoe Steel FD/E6/MAP/02/R " |
| 107 | All as per item No 37.01 above but for" Charpoy Steel(FD: ED/MAP-II/01 " |
| 108 | All as per item No 37.01 above but for" Bed Hard Steel (FD: E6/MAP/08(R)) " |
| 109 | M & L forFrench polishing to wooden furniture after removing the dirt and dust using mechanical grinder and including smoothing all the surface of exposed wooden portion by using sand paper including filling the pores / joints with putty wherever required all as specified and directed by Engr-in-Charge |
| 110 | All as per item No 38.01 above but for" Table Centre Drawing No FD- 274" |
| 111 | All as per item No 38.01 above but for"Chair Dining Officers (Drg No : FD/MAP-II/04)" |
| 112 | All as per item No 38.01 above but for"Chair Dining OR (Drg No : FD-279 /228)" |
| 113 | All as per item No 38.01 above but for" Table dining 6 person (Drg No FD/ MAP-II/03)" |
| 114 | All as per item No 38.01 above but for" Table dining 4 person (Drg No FD/ MAP-II/03)" |
| 115 | All as per item No 38.01 above but for " TablePeg (Drg No FD-384) " |
| 116 | All as per item No 38.01 above but for "Teapoy (Drg No FD-382) " |
| 117 | All as per item No 38.01 above but for"Table writing (Drg No : FD-275)" |
| 118 | All as per item No 38.01 above but for " Chair Easy (Drg No FD-229)" |
| 119 | All as per item No 38.01 above but for" Chair Writing (Drg No FD-280)" |
| 120 | All as per item No 38.01 above but for" Sofa Five Seater FD- 281 & FD / MAP-II/02" |
| 121 | All as per item No 38.01 above but for" Sofa Four Seater FD- 281 & FD / MAP-II/02" |
| 122 | All as per item No 38.01 above but for" Sofa Single Seater FD- 281 & FD / MAP-II/02" |
| 123 | S&F in replacement of rubber shoes/leg lap/Nylon PVC shoes for 18 Sqmm/20 Sqmm/25 Sqmm leg with 0.5 mm thick metal plate inside shoe/leg cap. Make : Saifix/Susan/Flora Green/Milad. |
| 124 | -do- All as per item No-39 above but for 38 Sqmm/32 Sqmm leng |
| 125 | S&F in replacement of SS/brass lock 6 lever with key (Godrej Pattern). |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
