Public Works Roads Department has published Ngtrd-05 Improvement Of C.K. Agarwalla Path Near Kamrup Academy School By Providing Gsb, Wbm, Icbp And Brick Masonry Drain Under Sopd-G For The Year 2023-24. Submission Date for this Tender is 21-02-2024. Drainage Tenders in kamrup Assam. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Dismantling of cement concrete pavements by mechanical means using pneumatic tools breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials upto a lead of 1000 m, stacking serviceable and unserviceable materials separately Cement Concrete |
| 2 | Removal of unsuitable soil including excavation, loading and disposal upto 1000m lead but excluding compaction ground supporting embankment subgrade replacement by suitable soil, which shall be paid separately as per Clause 303.5.2 as per Technical Specification Clause 302.3.11 |
| 3 | Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller toachieve the desired density, complete as perTechnicalSpecificationClause401Grading II |
| 4 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. (with an initial lead of 5.0Km) Grading-III metal. |
| 5 | Providing and laying interlocking concrete block pavement with M40 grade grade of concrete blocks having thickness 80mm as per technical specificationlause 1504 complete including carriage. Excluding Edge block / Edge restrains. |
| 6 | Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface. Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes and conforming to the MoSrt&H specifications |
| 7 | Providing reflective pavement marker with Micro prismatic lens in both direction having thermoplastic body adhering to the specification and guidelines of MoSRT&H’sfixed to the road surface using the adhesives and the procedures recommended by the manufacturers with three months replacement warranty and free maintenance. |
| 8 | Providing ‘Sparkle Solar Road Studs, manufactured by Tata B.P. Solar India Ltd. Of size (125mm x 125mm), 90mm height (from bottom of shank to the top of stud) with detachable battery, m6LEDs-three on each side for Bi-directional studs/ 3 LEDs on one side for unidirectional studs, ultra bright LED in amber and red colour, weight per stud 700+25 gms, flash rate of 50-65 times per minute completely water resistant and weather proof with replacement warranty and free maintenance fro one year from the date of installation of stud on road-(installation should be made using adhesives and procedures recommended by manufacturer under the supervision of their competent technician). a) Bi-directional Stud |
| 9 | Direction and Place Identification signs upto 0.9 sqm size board. A. Retro-reflectorised Traffic Signs.ii)Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on 2 inch dia GI Pipe firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 x 450 x 600 mm, 600 mm below ground level as per approved drawing and Tehnical Specification Clause 1701. |
| 10 | Providing and erecting of Retro-Reflectrorised cautionary, mandatory & informatory sign as per IRC: 67 made of high intensity encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick fixed on an angle iron of 25x25x4mm supported on a mild steel angle iron post 75mm x 75mm x 6mm firmly fixed to the ground by means of properly design foundation with M-15 grade Cement concrete 45cm x 45cm x 60cm, 60cm below ground level as per approved drawing and sign. ( All the Steel work must be Tata/Sail/or any other approved brand). ii) 600mm equilateral triangle |
| 11 | Providing and erecting of Retro-Reflectrorised cautionary, mandatory & informatory sign as per IRC: 67 made of high intensity encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick fixed on an angle iron of 25x25x4mm supported on a mild steel angle iron post 75mm x 75mm x 6mm firmly fixed to the ground by means of properly design foundation with M-15 grade Cement concrete 45cm x 45cm x 60cm, 60cm below ground level as per approved drawing and sign. ( All the Steel work must be Tata/Sail/or any other approved brand). iii) 600mm circular |
| 12 | Brick masonry Drain work: Dismantling of existing structures like culverts, bridges, retaining walls and otherstructures comprising of brick masonry, including disposal of unserviceablematerial and stacking the serviceable material with all lift and lead of1000 m asper Technical Specification Clause 202 b) In cement mortar |
| 13 | Removal of unsuitable soil including excavation, loading and disposal upto 1000m lead but excluding compaction ground supporting embankment subgrade replacement by suitable soil, which shall be paid separately as per Clause 303.5.2 as per Technical Specification Clause 302.3.11 |
| 14 | Providing and laying of dry rubble flooring complete as per drawings and technical specifications Clause 1303.3 |
| 15 | PCC 1:3:6 in Foundation (Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.) |
| 16 | Brick masonry work in 1:3 in sub-structure complete excluding pointing and plastering, as per drawing and technical specifications |
| 17 | Plastering with cement mortar (1:3 ) on brick work in sub-structure as per Technical specifications |
| 18 | Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/return wall with 100 mm dia AC pipe, .complete as per drawing and technical specifications. |
| 19 | Back filling behind abutment, wing wall and return wall complete as per drawing and technical specification. (B) Sandy materials |
| 20 | Painting two coat including primer coat after filling the surface with synthetic enamel paint in all shades on new plastered / concrete surfaces as per drawing and Technical Specification Clause 1701 |
| 21 | Providing concrete for plain / reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803,1202 & 1203 |
| 22 | Supplying, fitting and placing TMT bar reinforcement in sub-structure complete as per drawing and technical specifications |
| 23 | Plain/Reinforced cement concrete, in sub structure complete as per drawing and technical specification steel shuttering formwork. (E) R.C.C. Grade M20 (a) Height upto 5m |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
