Tender For Material Purchase For Mgnregs Works , Materials , Quarry Waste , Stone Aggregate(Single Size): 40 Mm Nominal Size , Stone Aggregate(Single Size):20 Mm Nominal Size , Stone Aggregate(Single Size): 10 Mm Nominal Size , Stone Aggregate(Single, chelakkara-Kerala

Material Purchase For Mgnregs Works , Materials , Quarry Waste , Stone Aggregate ( Single Size ) : 40 Mm Nominal Size , Stone Aggregate ( Single Size ) :20 Mm Nominal Size , Stone Aggregate ( Single Size ) : 10 Mm Nominal Size , Stone Aggregate ( Single Size ) : 06 Mm Nominal Size , Coarse Sand ( Zone Iii ) , Portland Cement , Hire Charges Of Concrete Mixer 0.25 To 0.40 Cum With Hopper , Vibrator ( Needle Type 40 Mm ) , Wall Form Panel 1250X500 Mm , Corner Angle 45X45x5 Mm 1.50 M Long , 100 Mm Channel Shoulder 2.5 M Long , Double Clip ( Bridge Clip ) , Single Clip , M.S. Tube 40 Mm Dia , Stone For Masonry Work , Hire Charges Of Diesel Road Roller- 8 To 10 Tonne , Interlocking C.C. Paver Block ( 80 Mm Thick, M-30 ) , Mild Steel Tubes Hot Finished Welded Type , Red Oxide Zinc Chromate Primer , Welding By Electric Plant , Synthetic Enamel Paint In Black Or Chocolate Shade , Solid Blocks Of Size 30X20x15cm , Fine Sand ( Zone Iv ) , G.I Pipes 50 Mm Dia , G.I. Pipes 40 Mm Dia , G.I. Pipes 25 Mm Dia , Red Oxide Zinc Chromate Primer , Gi Trafford Profile Sheet 0.35Mm Thick , Bitumen Washer , G.I Limpet Washer , Galvanised Steel J Or L Hooks 8 Mm Dia , Galvanised Steel Bolts & Nuts 6 Mm Dia And 25 Mm Long Round Head With Slots , White Vitreous China 10 Lit. ( Full Flush ) Capacity Controlled Low Level Flushing Cistern With All Fittings , Pvc Pipe 25 Mm Outer Dia. 10Kgf Cm2 , Solid Blocks Of Size 30X20x20cm , Galvanised Wire Mesh Of Average Width Of Aperture 1.4 And Nominal Dia. Of Wire 0.63 Mm , Wire Nails , Twisted Steel / Deformed Bars , Structural Steel Such As Tees, Angles, Channels And R.S. Joists , Adjustable Span Eso+Si ( 2.35-3.40 ) , Adjustable Telescopic Prop 3 M ( 2.02-3.75M ) , Beam Clamp 300-380 Mm ( 450-1070 Mm ) , Second Class Kail Wood In Planks , Second Class Kail Wood In Scantling , Hollock Ballies 125 Mm Diameter , Safeda Ballies 125 Mm Diameter , Average Rate Of Mild Steel Round Bars For Reinforcements , Stone Aggregate ( Single Size ) : 06 Mm Nominal Size , Mild Steel Round Bar 12 Mm Dia And Below , Flats Up To 10 Mm In Thickness , Anjili Wood Scantls , Bright Finished Or Black Enameled Mild Steel Butt Hinges 100X58x1.90 Mm , Bright Finished Or Black Enameled Mild Steel Butt Hinges 50X37x1.50 Mm , Bright Finished Or Black Enameled Mild Steel Screws 40 Mm , Bright Finished Or Black Enameled Mild Steel Screws 20 Mm , Anjili Wood Planks , Float Glass Sheet Of Nominal Thickness 4 Mm ( Weight Not Less Than 10 Kg / Sqm ) , Factory Made Door Frame Size 50X47 Mm With Wall Thickness 5 Mm Made Of Single Piece Extruded Profile , 35 Mm Thick Factory Made Solid Panel Pvc Door Shutter Of Single Piece Extruded Profile Non Decorative Finished ( Matt Finished ) , Powder Coated M.S. Butt Hinges 100 Mm X58 Mm X 1.9 Mm , Water Thinnable Cement Primer For Interior Wall Surface, Having Voc Content Less Than 50 Gms / Litre , Acrylic Exterior Paint , Exterior Primer , Plastic Emulsion Paint , Pink Primer ( For Wood ) , Synthetic Enamel Paint In Black Or Chocolate Shade , Vitrified Floor Tile 50X50 Cm , Ceramic Glazed Tiles Ist Quality Minimum Thickness 5 Mm In All Colours Shades And Designs Except Burgundy, Bottle Green Black , Ceramic Glazed Tiles Ist Quality 300 X 300 Mm In All Shades And Designs Of White, Ivory, Grey, Fume Red Brown Etc. , Polyethylene Water Storage Tank With Cover And Suitable Locking Arrangemnet , 200 Mm Aluminium Aldrop , Anodised Aluminium Tower Bolt ( Barrel Type ) 300X10 Mm , Chromium Plated Brass Screws 30 Mm , Vitreous China Flat Back Wash Basin 550X400 Mm , 15 Mm C.P.Brass Tap , C.P. Brass Waste 32 Mm , C.I. Bracket For Wash Basin And Sinks , Semi Rigid Pvc Waste Pipe For Sink And Wash Basin 32 Mm Dia With Length Not Less Than 700 Mm I / C Pvc Waste Fittings , Stainless Steel Kitchen Sink - Without Drain Board 470X420 Mm Bowl Depth 178 Mm , Vitreous China Orrisa Type W.C. Pan Size 580 Mm , Flushing Cistern P.V.C. 10 Lts Capacity ( Low Level ) ( White ) ( With Fittings, Accessories And Flush Pipe ) , 100 Mm S.C.I. Trap With Vent Heel , Black Plastic Seat ( Soild ) With Lid C.P.Brass Hinges And Rubber Buffers , Vitreous China Pedestal Type Wate Closet , Pvc Pipe 25 Mm Outer Dia. 10Kgf Cm2 , Pvc Pipe 110 Mm Outer Dia. 4Kgf / Cm2 , Pvc Elbow 110 Mm Dia , Pvc Door Elbow 110 Mm Dia , Pvc Bend 110 Mm Dia , Pvc Tee 110X110x110mm Dia , Pvc Vent Cowl 110 Mm Dia , Pvc End Cap 110 Mm Dia , Hire Charge Of 10 Hp Engine And Pump Set , Diesel Oil , Hydraulic Excavator ( 3D ) With Driver And Fuel , Hire And Running Charges Of Loader , Puddle Clay , Empty Cement Bag , Synthetic Enamel Paint In Black Or Chocolate Shade , Deharadun White Lime , Interlocking C.C. Paver Block ( 80 Mm Thick, M-30 ) , Galvanised Steel Plain Sheets , Epoxy Paint , Black Japan

Sr No	CorrigendumDate	Corrignedum	CorrigendumType	NewSubmissionDate
1	26-Feb-2024	Extend bid submission date	Date	02-03-2024

INR 8850 /-

INR 100000.0 /-

INR 3.32 Crore /-

Name of Work: MGNREGS Material Supply

Sl. No.	Item Description
1	Materials
2	Quarry Waste
3	Stone Aggregate(single size): 40 mm nominal size
4	Stone Aggregate(single size):20 mm nominal size
5	Stone Aggregate(single size): 10 mm nominal size
6	Stone Aggregate(single size): 06 mm nominal size
7	Coarse sand (zone III)
8	Portland Cement
9	Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper
10	Vibrator (Needle type 40 mm)
11	wall form panel 1250x500 mm
12	Corner angle 45x45x5 mm 1.50 m long
13	100 mm channel shoulder 2.5 m long
14	Double clip (bridge clip)
15	Single clip
16	M.S. Tube 40 mm dia
17	Stone for masonry work
18	Hire charges of Diesel Road Roller- 8 to 10 tonne
19	Interlocking C.C. paver block (80 mm thick, M-30)
20	Mild steel tubes hot finished welded type
21	Red oxide Zinc chromate primer
22	Welding by electric plant
23	Synthetic enamel paint in black or chocolate shade
24	Solid blocks of size 30x20x15cm
25	Fine sand (zone IV)
26	G.I pipes 50 mm dia
27	G.I. pipes 40 mm dia
28	G.I. pipes 25 mm dia
29	Red oxide Zinc chromate primer
30	GI trafford profile sheet 0.35mm thick
31	Bitumen washer
32	G.I Limpet washer
33	Galvanised steel J or L hooks 8 mm dia
34	Galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots
35	White Vitreous china 10 lit. (full flush) capacity controlled low level flushing cistern with all fittings
36	PVC pipe 25 mm outer dia. 10kgf cm2
37	Solid blocks of size 30x20x20cm
38	Galvanised wire mesh of average width of aperture 1.4 and nominal dia. of wire 0.63 mm
39	Wire nails
40	Twisted steel/deformed bars
41	Structural steel such as tees, angles, channels and R.S. joists
42	Adjustable span ESO+SI (2.35-3.40)
43	Adjustable telescopic prop 3 m (2.02-3.75m)
44	Beam clamp 300-380 mm (450-1070 mm)
45	Second class kail wood in planks
46	Second class kail wood in scantling
47	Hollock ballies 125 mm diameter
48	Safeda ballies 125 mm diameter
49	Average rate of mild steel round bars for reinforcements
50	Stone Aggregate(single size): 06 mm nominal size
51	Mild steel round bar 12 mm dia and below
52	Flats up to 10 mm in thickness
53	Anjili wood scantls
54	Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm
55	Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm
56	Bright finished or black enameled mild steel screws 40 mm
57	Bright finished or black enameled mild steel screws 20 mm
58	Anjili wood planks
59	Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm)
60	Factory made door frame size 50x47 mm with wall thickness 5 mm made of single piece extruded profile
61	35 mm thick factory made solid panel PVC door shutter of single piece extruded profile non decorative finished (Matt finished)
62	Powder coated M.S. butt hinges 100 mm X58 mm X 1.9 mm
63	Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre
64	Acrylic exterior paint
65	Exterior primer
66	Plastic emulsion paint
67	Pink primer (for wood)
68	Synthetic enamel paint in black or chocolate shade
69	Vitrified floor tile 50x50 cm
70	Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black
71	Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades and designs of White, Ivory, grey, Fume Red brown etc.
72	Polyethylene water storage tank with cover and suitable locking arrangemnet
73	200 mm Aluminium aldrop
74	Anodised Aluminium tower bolt (barrel type)300x10 mm
75	Chromium plated Brass screws 30 mm
76	Vitreous china flat back wash basin 550x400 mm
77	15 mm C.P.brass tap
78	C.P. brass waste 32 mm
79	C.I. bracket for wash basin and sinks
80	Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings
81	Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm
82	Vitreous China orrisa type w.c. pan size 580 mm
83	Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe)
84	100 mm S.C.I. trap with vent heel
85	Black plastic seat (soild) with lid C.P.brass hinges and rubber buffers
86	Vitreous china pedestal type wate closet
87	PVC pipe 25 mm outer dia. 10kgf cm2
88	PVC pipe 110 mm outer dia. 4kgf/cm2
89	PVC Elbow 110 mm dia
90	PVC door Elbow 110 mm dia
91	PVC bend 110 mm dia
92	PVC Tee 110x110x110mm dia
93	PVC vent cowl 110 mm dia
94	PVC end cap 110 mm dia
95	Hire charge of 10 HP engine and pump set
96	Diesel oil
97	Hydraulic Excavator (3D) with driver and fuel
98	Hire and running charges of loader
99	Puddle clay
100	Empty cement bag
101	Synthetic enamel paint in black or chocolate shade
102	Deharadun white lime
103	Interlocking C.C. paver block (80 mm thick, M-30)
104	Galvanised steel plain sheets
105	Epoxy paint
106	Black Japan