|
| 1 | (ii) Operation and Maintenance during 1st year after defect liability period. |
| 2 | (iii) Operation and Maintenance during 2nd year. |
| 3 | (iv) Operation and Maintenance during 3rd year. |
| 4 | (v) Operation and Maintenance during 4th year. |
| 5 | (vi) Operation and Maintenance during 5th year. |
| 6 | NS Item - PANEL BOARDS FOR MOTOR:- Supply Erection,Testing and Commissioning of wall mounted electrical LT Panel board of 1200 x 900 mm x 400 mm, fabricated from SWG CRCA sheet duly stoten with suitable angle iron frame work and completely powder coated of suitable size deep having following item for 1 Non clog submercible pumping) STAR DELTA STARTER :- 1.Main MCCB(ABB/LandT/SCHNEIDER - 01nos 2. Controlling MCB - 01nos 3.THERMAL OVER LOAD RELAY (ABB/LandT/SCHNEIDER) - 01 nos 4. AUXILARY CONTACTOR (ABB/LandT/SCHNEIDER) - 03 nos 5.START/STOP PUSH BUTTON(SCHNEIDER/SALZAR/SEIMENS) 6.EMERGENCY SWITCH(SCHNEIDER/SALZAR/SEIMENS) - 01 nos 7.DIGITAL VAF METER(SECURE/SELEC/TECHNO/ABB) - 01 nos 8.CT RATIO - 100/5 (AE/KAPPA/LandT) - 01 nos 9. CAPACITOR BANK AS PER LOAD REQUIREMENT 10. CHANGE OVER SWITCH AS PER LOAD(SCHNEIDER/SALZAR/SEIMENS) - 01 nos 11.SELECTOR SWITCH(SECURE/SELEC/TECHNO/ABB) - 01 nos 12. SINGLE PHASE PREVENTER(SECURE/SELEC/TECHNO/ABB) -01 nos 13.ELCB BREAKER(ABB/LandT/SCHNEIDER)1800 LPM x 20 mtr. Head. |
| 7 | `NS Item - PANEL BOARDS FOR MOTOR:- Supply Erection,Testing and Commissioning of wall mounted electrical LT Panel board of 1200 x 900 mm x 400 mm, fabricated from SWG CRCA sheet duly stoten with suitable angle iron frame work and completely powder coated of suitable size deep having following item for 1 Non clog submercible pumping) STAR DELTA STARTER :- 1.Main MCCB(ABB/LandT/SCHNEIDER - 01nos 2. Controlling MCB - 01nos 3.THERMAL OVER LOAD RELAY (ABB/LandT/SCHNEIDER) - 01 nos 4. AUXILARY CONTACTOR (ABB/LandT/SCHNEIDER) - 03 nos 5.START/STOP PUSH BUTTON(SCHNEIDER/SALZAR/SEIMENS) 6.EMERGENCY SWITCH(SCHNEIDER/SALZAR/SEIMENS) - 01 nos 7.DIGITAL VAF METER(SECURE/SELEC/TECHNO/ABB) - 01 nos 8.CT RATIO - 100/5 (AE/KAPPA/LandT) - 01 nos 9. CAPACITOR BANK AS PER LOAD REQUIREMENT 10. CHANGE OVER SWITCH AS PER LOAD(SCHNEIDER/SALZAR/SEIMENS) - 01 nos 11.SELECTOR SWITCH(SECURE/SELEC/TECHNO/ABB) - 01 nos 12. SINGLE PHASE PREVENTER(SECURE/SELEC/TECHNO/ABB) -01 nos 13.ELCB BREAKER(ABB/LandT/SCHNEIDER) 5300 LPM x 20 mtr. Head |
| 8 | 1 STP (SEWAGE TREATMENT PLANT): 2.50 MLD: Design, construction, erection, testing and commissioning of 2.50 MLD capacity Sewage Treatment Plant based on Sequential Batch Reactor (SBR) including Electrical, Mechanical, Piping and Instrumentation work with PLC and SCADA arrangement for STP integrated with MPS including furniture and laboratory equipments as per detail and specifications mentioned in attached additional documents along with following provisions: 1.1 2 No. High Mast of 9 mtr GI Octagonal pole of 4 mm thickness (T=100 mm, B=200mm, Base Plate = 320 x 320 x 20 mm), Window at 500 mm from Base Plate with 6 No. LED suitable size, outdoor type energy efficient lamps on each pole, 20 no. LED outdoor light with 7 m. high GI pole along road / path including all accessories complete in all respect. 1.2 Supply and fixing of 1 No. 3.65 m wide SS 304 main Gate along with1.25 m. wide wicket gate at STP to the entire satisfaction of Engineer-in-charge. (Total weight not less than 500 kg). 1.3 CC TV CAMERAS: Providing and Installing 6 CCTV Cameras (4 Cameras for STP and 2 Camera at MPS) within 96 hours of signing the agreement along with 120 days recording (DVR), 48 inch LED Screen, 16 Channel DVR at STP and MPS Site with connectors, cables, poles and power supply with online real-time output facility. The cameras at MPS and STP shall be synchronized at STP site complete in all respect. PTZ speed dome 360 degree 50X zoom camera, CP Plus Internet Protocol minimum 5 MP WDR, Night vision color mode, IR range up to 150 m. CCTV Cameras should be installed and commissioned before starting of the work.Make: Sony / Canon / Panasonic / Samsung.1.4 EWQMS (Effluent water quality monitoring system): Supply, Installation, Testing, Commissioning, Operation and Comprehensive Annual Maintenance of effluent quality monitoring system at 2.50 MLD capacity STP for online (continuous) measurement of PH, Total Suspended Solids (TSS), Chemical Oxygen Demand (COD), Biological Oxygen Demand (BOD) by single analyzer with various sensors (spectral measurement in the UV-VIS range 200-720mm) performing reagent and chemical free analysis with automatic cleaning of censor, signal cables and power cables, local data acquisition and display of data on continuous basis for up linking the data to CPCB, HSPCB and PHED, TUV approved complete in all respect as per Central Pollution Control Board (CPCB) guidelines for online continuous monitoring system for effluents. 1.4.1 Multi-parameter measuring converter, for connecting up to 18 intelligent sensors Scope including 8 analog inputs / outputs (4 inputs and 4 outputs) (0/4-20Ma), wide- range power supply Optical COD/BOD and TSS probe with spectral processing of the UV-VIS range, for measurement in the outlet / effluent of 2.50 MLD capacity STP with integrated with automatic cleaning complete in all respect. 1.4.2 Robust digital pH/ORP sensor for pH/ORP electrodes, with built-in pre-amplifier and temperature sensor with Automatic Temperature Compensation (ATC) Cable length 100 Meter (minimum) complete in all respect. 1.4.3 Sensor adapter cable for all intelligent sensors, with IP68 water proof connection to the intelligent Sensor Net system. Cable length 100 meter (minimum) complete in all respect. 1.4.4 Data transfer to CPCB, HSPCB and PHED servers complete in all respect. 1.4.5 Providing GSM 3G, 4G modem with mobile network connectivity including network including complete in all respect. 1.5 Conveyance of treated effluent from chlorine contact tank to effluent collection tank through suitable size DI K9 pipe along with cost of pipe, sluice valves, specials, material and labour complete in all respect. 1.6 Supply Installation Testing and commissioning of electromagnetic flow meter with transmeter tranducer digital display as per technical specifications complete in all respects to the entire satisfaction of engineer-in-charge at STP of required size at inlet, outlet and bypass pipelines under Make (ABB: Crohnemarsal: EandH, Seimens, Ultra sonic). |
| 9 | H.T. METERING PANEL: Supply, erection, testing and commissioning of 11KV Indoor H.T Metering Panel complete with suitable CTs, PTs and 3 phase, 4 wire Digital Electronic KWH Meter with accuracy class of 0.5 as per requirement and approval of UHBVN, consisting of the Cubical Panel Box of minimum size 700mm x700mm x1500mm free standing, floor mounting type made out of 14 SWG CRCA sheet steel powder coated with epoxy coated channel iron base frame. |
| 10 | MPS (MAIN PUMPING STATION): Design, construction and commissioning of MPS for 2.50 MLD average flow with peak factor 3 including RCC Inlet chamber, screening chamber, collecting tank, wet well sump complete in all respect as per detail and specifications mentioned in attached additional documents along with following provisions: 1.1 Providing, fixing and commissioning of 5 non clog sewage submersible pumping sets as per IS marked ie. 1 of 5300, 2 of 1800 and 2 of 900 LPM having minimum head of 20 m along with making all arrangement including sluice valves, Non return valves, specials, flanged individual and common delivery pipes, suitable size LT panel boards and suitable size cable from LT panel to pumps, all safety devices, automatic capacitor bank, complete in all respect as per specification mentioned in attached additional documents. 1.2 Suitable size (as per design) K9 DI pipe at MPS for interconnecting the structures including welding and screwing of flanges, ISI marked D.I. fittings, sluice valves, non returning valves as per requirements even for bye-pass arrangements complete in all respect 1.3 Suitable size (as per design and requirement) Gear Operated Sluice Gate with SS Spindle (SS 410) and seats (SS 304) for screens and partition of collecting tank as per design. 1.4 Supply and installation of 1 mechanical and 1 manual coarse screen (SS 304) suitable for 2.50 MLD average flow with peak factor of 3.0 complete in all respect. 1.5 Conveyance of raw sewage from MPS to inlet chamber of STP through suitable size (as per design) DI pipe along with cost of DI pipe, sluice valves, specials, material and labour complete in all respect. 1.6 All the pumping machinery, panel board, Level sensor etc shall be controlled by PLC and SCADA and shall be synchronized with PLC panels at MPS and STP site through broadband internet facility. 1.7 Raw sewage will be available near boundary wall within the premises of proposed MPS but the conveyance of sewage from this terminal point to the inlet chamber of MPS through DI K9 pipe of suitable diameter as per design is included in the Turnkey contract. The Level of the MPS / STP will be as per bed level of existing incoming sewer at MPS. The size and quantities of all their above components will be as per approved structural/Hydrauic/Mechnaical/Electrical design to be approved by Department before actual execution of work.. |
| 11 | NS Item - PANEL BOARDS FOR MOTOR:- Supply Erection,Testing and Commissioning of wall mounted electrical LT Panel board 1200 x 900 x 400 mm , fabricated from SWG CRCA sheet duly stoten with suitable angle iron frame work and completely powder coated of suitable size deep having following item for 1 Non clog submercible pumping) DOL Starter :- 1.Main MCCB(ABB/LandT/SCHNEIDER),Controlling MCB - 2nos 2.THERMAL OVER LOAD RELAY (ABB/LandT/SCHNEIDER) - 01nos 3. AUXILARY CONTACTOR (ABB/LandT/SCHNEIDER) - 01nos 4.START/STOP PUSH BUTTON(SCHNEIDER/SALZAR/SEIMENS) - 1each 5.EMERGENCY SWITCH(SCHNEIDER/SALZAR/SEIMENS) - 01 nos 6.DIGITAL VAF METER(SECURE/SELEC/TECHNO/ABB) - 01 nos 7.CT RATIO - 100/5 (AE/KAPPA/LandT) 8. CAPACITOR BANK AS PER LOAD REQUIREMENT 9. CHANGE OVER SWITCH AS PER LOAD(SCHNEIDER/SALZAR/SEIMENS) 10.SELECTOR SWITCH(SECURE/SELEC/TECHNO/ABB) 11.SINGLE PHASE PREVENTER(SECURE/SELEC/TECHNO/ABB) 900 LPM x 20 mtr. Head |
| 12 | Operation and Maintenance for complete scope of work mentioned in the DNIT i.e. Sewage Treatment Plant (STP), Treated Effluent Carrier (Disinfection material supplied by PHED) as per schedule-IV for a period of 5 year after 12 month during defect liability period and 03 Months trial run period will be charged to the A/Mtc. Estimate complete in all respect as per approved NIT.(i) Operation and Maintenance during defect liability period (Operation only) after 3 month trial run period. |
| 13 | COPPER CABLE: Supply, erection, testing and commissioning of IS marked 3 core Copper Cables, Solid Copper conductor up to 6sqmm and balance Stranded Copper, XLPE Insulated, cores laid up, PVC Inner sheathed, Armoured (Glavanised wire for cables up to 10x1.5sqmm, 8x2.5sqmm, 2x10sqmm, 3x10sqmm, 4x6sqmm and balance all galvanized steel strip), extruded PVC type ST2 Outer Sheathed, /1100 V grade as per IS 7098 (Part 1) 1988 with up to date amendments along with all accessories like thimble lugs etc for motors as per entire satisfaction of Engineer-in-charge complete in all respect. Make: Indian Cables Ltd./ Finolex / Havells / Polycab / RR Cables / CAPP / Gloster / Universal / Fort Gloster Industries Ltd./ Asian Cables Corporation Ltd16 mm2 3core |
| 14 | COPPER CABLE: Supply, erection, testing and commissioning of IS marked 3 core Copper Cables, Solid Copper conductor up to 6sqmm and balance Stranded Copper, XLPE Insulated, cores laid up, PVC Inner sheathed, Armoured (Glavanised wire for cables up to 10x1.5sqmm, 8x2.5sqmm, 2x10sqmm, 3x10sqmm, 4x6sqmm and balance all galvanized steel strip), extruded PVC type ST2 Outer Sheathed, /1100 V grade as per IS 7098 (Part 1) 1988 with up to date amendments along with all accessories like thimble lugs etc for motors as per entire satisfaction of Engineer-in-charge complete in all respect. Make: Indian Cables Ltd./ Finolex / Havells / Polycab / RR Cables / CAPP / Gloster / Universal / Fort Gloster Industries Ltd./ Asian Cables Corporation Ltd35 mm2 3core |
| 15 | LT CABLE ALLUMINIUM: Supply, erection, testing and commissioning of IS marked 3.5 core Cables, Solid Aluminum conductor up to 10sqmm and balance stranded conductor, XLPE Insulated, cores laid up, PVC Inner sheathed, Armoured (Aluminium wire for single core up to 70sqmm and balance Aluminium strip, Glavanised wire for cables up to2x10sqmm, 3x10sqmm, 4x6sqmm and balance all galvanized steel strip) extruded PVC type ST2 Outer sheathed, 650/1100V grade as per IS7098 (Part-1) 1988 with up to date amendments along with all accessories complete in all respect. Make: Indian Cables Ltd./ Finolex / Havells / Polycab / RR Cables / CAPP / Gloster / Universal / Fort Gloster Industries Ltd./ Asian Cables Corporation Ltd.150 Sqmm x 3.5 C x 4 Run |
| 16 | HT. ALLUMINIUM CABLE: Supply erection testing of standard make XLPE 3 core HT / 11 KV grade ISI marked Stranded compact circular aluminium conductor, conductor screen with extruded semi conducting compound, XLPE insulated, insulation screening with extruded semi conducting compound in combination with copper tape, cores laid up, innersheath of PVC, galvanised steel flat strip armoured, and overall PVC sheathed cable conforming to is 7098 (part-2) 2011 with up to date amendments for making following connection a) from G.O switch to metering equipment . b) from metering equipment to transformer complete in all respect. Make: Indian Cables Ltd./ Polycab / RR Cables / CAPP / Finolex / Havells / Gloster / Universal / Fort Gloster Industries Ltd./ Indian Cable Co. / Asian Cables Corporation Ltd. 70 sqmm x 3C x 2 Run |
| 17 | ANNEXE BUILDING: Construction of HT / LT Panel room, PLC room, Centrifuge house, Blower room and Lab cum Office building including doors, window and fitting with Toilet block including all sanitary fittings etc. andcomplete in all respect as per drawings approved by SE at MPS and STP covered areas built up with RCC frame structure and brick work finished with virtified glaze tiles flooring, powder coated aluminum frame made with 10 gauze sheets having size 10 mm x 45 mm for chowkhat, 75 mm x 45 mm for door frame and 45 mm x 45 mm for window frame with 5 mm thick glass AIS/Saint Gobain/Modi Float. |
