Military Engineer Services-MES has published Tender For Additional/Alternator To Bldg No T-11 Of Med Regt At Mamun Mil Stn. Submission Date for this Tender is 15-03-2024. Mobile Generator Tenders in mamun Punjab. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 27-Feb-2024 | Amdt | BOQ | 08-03-2024 |
| 2 | 08-Mar-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 15-03-2024 |
| Sl. No. | Item Description |
| 1 | Taking down cement plaster hacking for key, raking out joints of old brick work built in cement mortar and scrubbing down with water etc. to receive plaster complete all as specified and directed. |
| 2 | M&L for 15 mm thick rendering in cement mortar 1:4 mixed with WPC @ 200 ml/ bag of cement on brick or concrete surfaces of walls,surface finished even and smooth without using extra cement complete all as specified and directed. |
| 3 | M&L for 10 mm thick rendering in cement mortar 1:6 on brick or concrete surfaces of walls, surface finished even and smooth without using extra cement complete all as specified and directed. |
| 4 | M&L for 5 mm thick rendering in cement mortar 1:3 on brick or concretesurfaces of ceilings and finished even and smooth without using extra cement all as specified and directed. |
| 5 | M&L for preparation of newly plastered or un plastered surfaces of walls and applying two coats of cement base paintcomplete all as specified and directed. |
| 6 | M&L for preparation of new plastered surfaces of walls, applying 2mm thick wall care putty and making the surface even & smooth and applying two coat of oil emulsion distemper complete all as specified and directed.. |
| 7 | M&L for preparation of newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed |
| 8 | M&L for preparation of old surfaces of walls after complete removal of existing treatment applying 2mm thick wall care putty, making the surfaceeven & smooth and applying two coats of oil emulsion distemper complete all as specified and directed. |
| 9 | M&L for preparation of oldsurfaces of walls after complete removal of existing treatmentand making the surface even & smooth and applying two coats of cement base paint complete all as specified and directed. |
| 10 | M&L for preparation of old surfaces of ceilings and applying two coats of white wash incl washing rubbing, brooming down with wire brush, scrapping down smoke soot, moulds & efflorescent salts and trading oil and greasy spots complete all as specified and directed. |
| 11 | M&L in repairs for mild steel rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running railsand guides for sliding doors; fixed with angle cleats or other connecting plates of Fe 410 W Gde E 250 quality A complete all as specified and directed. |
| 12 | M&L for preparation of newsurfaces of steel or iron of any discription exc 10cm width or girth and providing two coat of synthetic enamel paintover a coat of red oxide complete all as specified and directed. |
| 13 | M&L for preparation of old surfaces of steel or iron of any discription exc 10cm width or girth and applying one coat of synthetic enamel paintcomplete all as specified and directed. |
| 14 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exc. 0.11 sqm and n. exc. 0.16 sqmin floorsetc set and jointed(joint free) in neat cement slurry and pointed in coloured cementto match, laid over 15mm thick screed bed or bedding layers of cement mortar 1:4 incl dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing removing serviceable tiles from site and rubbish off the premisescomplete all as specified and directed. |
| 15 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqmbut not exceeding 0.38 sqmin floorsetc set and jointed(joint free) in neat cement slurry and pointed in coloured cement to match, laid over 15mm thick screed bed or bedding layers of cement mortar 1:4 incl dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing removing serviceable tiles from site and rubbish off the premisescomplete all as specified and directed |
| 16 | M&L for glazed ceramic coloured tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match incl rendering 10mm thick in cement mortar (1:4), incl dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing removing serviceable tiles from site and rubbish off the premises complete allas spd & directed. |
| 17 | M&L forGreen/Bhaisiana Zebra Marble 18 to 20mm thick (pre-mirror polished) in single piece in steps (tread and risers) and floor jointed in neat cement slurry including pointing in epoxy grout to match marble shade,laid over and including 15mm thick screed bed in CM 1:4complete all as specified and directed. |
| 18 | Taking down chowkats or frames area exc 1.5 sqm but n exc 4 sqmwith shutter (without taking off shutters from the frame) and removing from site complete all as specified and directed. |
| 19 | Taking down chowkats or frames area n exc 1.5 sqmwith shutter (without taking off shutters from the frame) and removing from site complete all as specified and directed. |
| 20 | S&F factory made pressed steel frame of size 125x60mm, made out of MS sheet 1.25mm thickfor doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling hollow back chowkhats with cement concrete 1:3:6 type C-0 (using 12.5 mm graded aggregate stone aggregate)incl application of two coats of synthentic enamel paint on exposed surfaces of steel surfaces complete all as spoecified and directed. |
| 21 | S&F factory made 35mm thick, 2nd class hard wood plain framed, panelled shutters (two panels) with lock rail and panel of 9mm thick BWP commercial ply. The size of rail and stile as per IS-1003 (Part-I) (Larger size to be provided) kiln seasoned and chemically pressure treated, fitted to chowkhats including preparation of surfaces of shutter and application of two coats of synthetic enamel paint over a coat of pink primer, etc complete all as specified and directed. |
| 22 | M&L 35 mm thick wire guazed and skeleton shutters (1st class softwood) , open rebated and prepared to receive wire cloth, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing wire cloth, etc.; sizes of me-mbers of shutters as specified in fitted to chowkats including preparation of surfaces of shutter and application of two coats of synthetic enamel paint over a coat of pink primer, etc complete all as specified and directed |
| 23 | S&F factory made single extruded WPC (Wood Polymer Composit) solid door/windows/ceosetory windows & other frames/chowkhat of size 45 x 70mm comprising of vigin PVC polymer of K value solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (suspension grade), calcium carbonate & natural fibres (wood powder/rice husk/ weat husk) and non additives (maximum toxicity index of 12 for 100gms) fabricated with mitre joints after applying PVC solvent cement and screwed with fully body threaded star headed SS screws having minimum frame density of 750kg/cum, screw withdrwal strenght of 2200N (face), 1100n (edge), minimum compressive strength 58 N/Sqmm , modulas of elasticity 900N/sqmm and resistence to spread of flame of Class A category with property of being termite /borer proof,water/moisture proof and fire retrdant and fixed position MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note:- MS hold fasts/lugs or SS fasteners shall bemeasured and paid separately |
| 24 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing in SSR-2020 Part-II. |
| 25 | S&F Box type Steel windows and ventilators comprised oftubular frame and shutters made out of 1.25mm thick M S sheet tubefactory made with double side hungwire gauged shutter & glass/glazed shutter (wire cloth and glass panes only shall be measured and paid separately) with steel handle and steel peg stay dovetailed or welded incl 2 Nos. tower bolts 150mm long for each leaf and 10mm square bar grills at spacing as shown on drg, welded to F I frame work, including other fittings; hinges, handles, tarred hold fasts fixed in PCC blocks etc all as shown on drg No CEPZ/TD-354/09 sheet 1/3 to 3/3 including two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and directed. |
| 26 | S&F 3 mm sheet glass, ordinary quality insquare or rectangle n. exc 0.5 sqm each panefixed to framed work (for windows) complete all as specified. |
| 27 | S&F 3 mm figured glass, pinhead type in squares n exc 0.5 sq. m each pane fixed to aluminium framed work (venilators)complete all as specified. |
| 28 | S&Fstainnless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wirre staples or rubber/all beads complete all as specified and directed. |
| 29 | S&F200 mm long barrel tower bolt aluminiumanodised,of extruded section and fixed complete all as specified and directed. |
| 30 | S&F150 mm long long barrel tower bolt aluminiumanodised,of extruded section and fixed complete all as specified and directed. |
| 31 | S&F 150 mm long extruded aluminium alloy handle, fabricated type, anodised complete all as specified and directed. |
| 32 | S&F 100 mm long butt hinge, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed complete all as specified and directed.. |
| 33 | S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 34 | S&F 300mm mild steel, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 35 | S&F in repairs 15mm bore pillar cock fancy type chromium plated, screwed down high pressure with or without letters hot or cold with long screwed shank and fly nuts screwed for iron pipecomplete all as specified & directed. |
| 36 | S&F in repairs Bib taps with flange for 15 mm bore pipe, cast copper alloy fancy type chromium platedcomplete all as spd and directed. |
| 37 | S&F in repairs Stop valve/ Angle valve with flange cast copper alloy (ISI Marked) chromium plated screwed down high pressure with capstan head screwed both ends for iron pipe 15mm bore dia complete all as specified and directed. |
| 38 | S&F in repairs Stop valve cast copper alloy (ISI Marked) fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure with capstan head screwed both ends for iron pipe 15mm bore dia complete all as specified and directed. |
| 39 | S&F in repairs 600 mm x 450 mm mirror of selected quality 5 mm thick glass with PVC sheet on back and PVC frame fixed with chromium plated brass screws and cup washers with PVC beading all as spd. |
| 40 | S&F in repairs towel rail brass chromium plated600 mm long complete all as specified and directed. |
| 41 | S&F in repairs CP Shower rose with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed. |
| 42 | S&F in repairs Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed with 20 mm dia pipe complete all as specified and directed. . |
| 43 | S&F in repairs PVC flushing cistern 10 ltr capacity incl PVC connection inlet and and outletconnections, brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC complete all as specified and directed. |
| 44 | S&Fin repairs vitreous china wash hand basin, white flat back, including waste pipe, brackets and cutting for and pinning in ends of & incl brackets or errecting standand 32 mm diaPVC waste pipefixed in repair including waste coupling 32mm size full thread, complete all as specified and directed. |
| 45 | S&F in repairs Vitreous china wash down water closet pan (pedestal pattern), white, complete including fixing to trap, Incl Supply and fixing of PVC seat and cover complete all as specified and as directed. |
| 46 | S&F in repairs Chromium plated Jet Spray (with 1.50 mtrtube) fixed to EWC and Angular Stop Cock complete all as specified and directed. |
| 47 | S&F in repairs Stainless steel Grating doom 100mm dia with waste hole complete fixing in floors complete all as specified and directed. . |
| 48 | S&F in repairs Stainless steel Grating doom 100mm dia complete fixing in floors complete all as specified and directed. |
| 49 | S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 50 | S&F in repairs Rotational moulded polyethlene water storage tanks of capacity 1000 litres three layers(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete including 20mm dia ball PVC valve high pressure with polythene float incl taking down existing water tank of any capacity complete all as specified & directed. |
| 51 | S&F in repairs steel tubes, 15 mm bore "medium grade" galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified & directed. |
| 52 | S&F in repairs steel tubes, 20 mm bore "medium grade" galvanised, with all fitting and fixed complete to walls and ceilings or laid in floorscomplete all as specified & directed. |
| 53 | S&Fin repairs 20 mm bore mild steel drapery rods with 1 mm thick PVC wood grain coating including brackets and knobs fixing above windows and doors openings for hanging curtains complete all as specified and directed. |
| 54 | M&L for 75mm thick Cement concrete 1:3:6 type C-1, using 20mm graded stone aggregate as in plinth protection and pavingslaid in slope finished even and fair incl making joints at every 2.5 m and at corners filled with bitumen 85/25 and sand in ratio 1:2 by weight complete all as specified and directed |
| 55 | S&F in reapirs Cast iron floor trap 75 mm with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 56 | S&F in reapirs Cast iron floor trap 100 mm with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 57 | S&F in reapirs Cast iron gully/nahani trap 100 mm with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 58 | Taking down old/broken cast iron pipes of any dia from existing lines fixed to walls with clamps or laid in trenches Including necessary excavation & earthwork complete all as specified and directed. |
| 59 | Supply, laying and jointing 100 mm bore Cast iron soil, waste and vent pipes (sand cast) in any length with or without ears, with cement joints, fixed on walls with clamps complete all as specified and directed. |
| 60 | S&F 100 mm dia cast iron bend (sand cast) with oval access door and jointed with neat cement paste complete all as specified and directed. |
| 61 | S&F 75 mm dia cast iron bend (sand cast) with oval access door and jointed with neat cement paste complete all as specified and directed. |
| 62 | Supply, laying and jointing 75 mm bore cast iron soil, waste and vent pipes (sand cast) in any length with or without ears, with cement joints, fixed on walls with clamps complete all as specified and directed. |
| 63 | S&F 75 mm cast iron cowls jointed with neat cement paste complete all as specified and directed. |
| 64 | S&F Stack clamps out of 50 mm x 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100 mm dia CI pipe. |
| 65 | S&F Stack clamps out of 50 mm x 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75 mm dia CI pipe. |
| 66 | M&L for 25 mm thick PCC 1:2:4 type B-0, using 12.5 mm graded aggregate as in padding on top of membrane complete all as specified and directed. |
| 67 | M&L for rendering 10mm thick in cement mortar 1:4 onconcrete surfaces on top of roof slab mixed with 200ml of liquid water proofing compound per 50kg of cement and surface finishing even and smooth without using extra cement complete all as specified and directed. Note:- WPC shall be measured and paid forseparately |
| 68 | M&L for APP modified roof treatment over existing non-accessible RCC roof slab / chajjah / canopy / parapet wall to be executed through approved applicator of the membrane manufacturer with following specification etc complete all as specified and directed :- (a) Cleaning existing surface properly. (b) Applying oil based bitumen primer with a density 0.87-0.89 Kg per litre at 25 degree centigrade manufactured by the same agency as that of APP on prepared surfaces @ 0.30 litre/Sqm. (c) Laying not less than 3.6mm thick APP modified water proofing membrane weighing not less than 3.60 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160gsm/Sqm using butane torch by torch application with 10cm side laps and 15cm end lap. |
| 69 | Supply only liquidwater proofing compound complete all as specified and directed. |
| 70 | S&F in repairs Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified incl taking down of existing AC/steel Sheets |
| 71 | S&F in repairs Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick and 450 mm width of any ecofriendly colour having tensile strength of 550 Mpa as in riges/valley, fixed with self tapping screws incl taking of existing ridge complete all as specified and directed. |
| 72 | M&L in repairs for False ceiling of 8 to 9 mm thick gypsum tiles (600x600mm) laminated with PVC film on the face side & metalised polyester film on the back side with all four edges sealed with PVC film (shade either plain white or crack) fixed using T grid/Cross-T/Wall angle/level clip & suspenders/Hangers 4 mm dia. G.I. wire (upto1200mm length) adjusting level fixed to roof slabs/trusses complete all as specified including standardgalvanised sections in a grid size of 600x600mmincluding taking down existing ceiling board & grid work etc of any type/pattern complete. |
| 73 | M&L for 75mm thick PCC 1:4:8: type D-2 (using 40 mm graded stone aggregate) in floors as sub base complete all as specified and directed. |
| 74 | M&L for coloured machine pressed rubber moulded precast concrete interlocking (red/yellow) paver blocks any shape and size as approvedhaving glossy finish, 60 mm thickness M-35 Grade with grey cement and pigment complete incl demolition of existing paver blocks complete all as specified and directed. |
| 75 | M&L for Sand filling under paver blocks using fine sand complete all as specified and directed. |
| 76 | M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in kerbs of interlocking/Chequered tiles incl necessary form work complete all as specified and directed. |
| 77 | M&L for brick work using fly ash bricks (Old Size bricks) straight or curved on plan exc 6 mtr mean radius built in cement mortar 1:6 ncluding demolition of existing brick work complete all as specified andd directed. |
| 78 | Demolition and breaking up drain pipes ( Salt glazed ware, AC or Reinforced concrete) set in cement mortar of internal dia 150mm bore complete all as specified and directed. |
| 79 | Supply and laying SGSW drain pipes 150mm bore, grade "A" laid in trenches and jointed in cement mortar (1:1) with spun yarn and tested complete all as specified and directed. |
| 80 | M&L for cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregates) as in landing, cover slab, shelves & similar articles with plain faces complete all as specified and directed. |
| 81 | Demolition of reinforced cement concrete of any description & in any position complete all as specified and directed. |
| 82 | M&L for mild steel TMT bars 10mm dia & over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips etc complete all as specified and directed. |
| 83 | M&L for mild steel TMT bars 8mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips etc complete all as specified and directed. |
| 84 | Taking down carefully copper/aluminium point wiring (light/Fan socket or power) with complete fittings such as switch, sockets Ceiling rose pendent holders regulators etc.removing old/UNSV material from site and making good the disturbed surfaces complete all as specified and directed. |
| 85 | M&L for point wiring for one light point or fan point controlled by one switch with 1.5 sqmm FRLS PVC insulated unsheathed copper conductor single core multi strand flexible cable FRLS and 1.5 sqmm PVC insulated unsheathed copper conductor single core cable FRLS (green color) as earth lead drawn in and including non metallic rigid PVC conduitincluding new pressed steel sunken box of required size & 3mm thick plastic laminated top sheet, including cutting chases to wall making good the disturbed surfaces to match with theexisting specification complete all as specified. |
| 86 | All as per description of item No. 85 here-in-before but for one light point controlled by two 2-way switches |
| 87 | All as spoer descriptionof item No. 85 here-in-before but for one 5 pin socket out let 5/6 Amps on same board of other switches. |
| 88 | All as spoer descriptionof item No. 85 here-in-before but for one light point controlled by one switch on Independent board. |
| 89 | All as per item No 85 above but with 2.5 sqmm FRLS copper cable insulated for 3 pin 15/16 ampmultipurpose outlet including 2.5 sqmm FRLS PVC insulated copper wire for earth continuity on independent board complete. |
| 90 | All as per item No 84 above but with 4 sqmm FRLS Copper cable insulated for metal plug top geyser outlet including 4 sqmm FRLS PVC insulated copper wire for earth continuity on independent board complete. |
| 91 | S&Fswitch piano flush button single pole one way 5/6 amps 240 volts with polycarbonate body complete all as specified and directed. |
| 92 | S&Fswitch piano flush button single pole two way 5/6 amps 240 volts with polycarbonate body complete all as specified and directed. |
| 93 | S&Fswitch piano flush button single pole one way 15/16 amps 230 volts with polycarbonate body complete all as specified and directed. |
| 94 | S&Fsocket outlet, 6 pin 5/6 and 15/16 amps multi purpose 2 in 1 flush type, 230 volts with polycarbonate body complete all as specified and directed. |
| 95 | S&F socket outlet 6 amps 5 pin flush type, 240 volts with polycarbonate body complete all as specified and directed. |
| 96 | S&F fan regulator electronic, step type hum free with polycarbonate body suitable to control speed of fan from 0 to 100% and connecting electrically all as specified and directed. |
| 97 | S&F lamp holder with lamp holder batten type polycarbonate body with back plate for batten fitting, fixing with proper round block all as directed. |
| 98 | S&F LED lamp 9 watt PF>0.90, 230 volts retrofit type complete all as specified and directed. Note:- The contractor shall produce LM-79 & LM-80 test repots from NABL accredited lab . |
| 99 | S&F ceiling rose surface bakelite 2 to 3 terminals with polycarbonate body complete all as specified and directed. |
| 100 | S&F in repairs sheet metal enclosure with DB"s (grouted in walls) double door type for MCB"s DB 08 ways with 200 Amps 240 volts rated bus bar complete all as specified and directed. |
| 101 | S&F miniature circuit breaker (MCB) of single poles, 240V, 10 KA, "B" curve, current carrying capacity 5 to 32 Amp in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 102 | S&F miniature circuit breaker (MCB) of single poles and neutral, 240V, 10 KA "C" curve,current carrying capacity 40 to 63 Amp, in the MCB DBwith connection testing and commissioning complete all as specified and directed. |
| 103 | M&L for sub main wiring usingtwo single core FRLS PVC insulated copper cables 6 Sqmm (Nominal dia) with copper conductor (multistrand) and drawing in and including PVC concealed conduit pipe ISI marked including 6 Sqmm multistranded FRLS copper conductor PVC green insulated unsheathed cable for earth continuity complete all as spd and directed. |
| 104 | S&F LED lights fitting 1x 20W, 4 feet, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 105 | S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 106 | S&F LED light fitting 1x9w/1x10w bulk head luminaires incl LED light driver holder connecting up to three core flexible copper conductor cable of suitable size. |
| 107 | S&F in replacement of sheet metal enclosure Vertical type (VTPN) distribution board, double door, tripple pole & neutral, 415 volts 4 way degree of protection IP-65 DBs TPNsuitablefor& incl MCCB415 V 63 Amp 16 KA as outgoing, MCB, 415 Voltsas incomer and 16 Nos MCB SP of Cap 63 Amp as outgoing complete with appropriate size bus bars and neutral link, fixed flush in wall including making chases in wall for fixing DB and making good distributed wall surfaces to match with existing specification, complete all as specified and directed. |
| 108 | S&F LED street light fitting 25 Watts, IP 65, having pressure die cast alumn alloy housing, prismatic polycarbonate cover complete, making connection with 3 core copper flexible cable of size 23/.0076 including bracket 0.90 mtr long made out of 32mm dia GI light grade pipe, fixed to wall with nuts and bolts complete all as specified and directed. |
| 109 | M&L for earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth plate not less than 2.25 mtr deep below the normal ground level) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth lead wire of 4.0mm dia by means of nuts, bolts, washers, check nuts of iron or steel including PCC pits and RCC cover in PCC 1:2:4 (type B-1) and necessary earth work in any type of soil, medium grade GI watering pipe 20 mm dia with funnel and wire mesh and 15mm bore GI pipe light grade protection pipe upto test point etc including excavation and charcoal, common salt surrounded with 15cm all around the plate complete all as specified and shown in electrical plate -3 of SSR Part-I. |
| 110 | S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp,240 volt complete all as specified and directed. |
| 111 | M&L for taking down ceiling fan 1200mm/1400mm of any make, from fan hook, opeing fan body, dismantling fan motor, taking out burnt winding by cutting, cleaningslots and re-winding of motor with super enameled heat resistant copper winding wire of existing gauge & Nos of turns including, sleeve work, varnishing with E class insulation, greasing, threading, connection with flexible wire copper wire of suitable size upto connector block and re-assembling and testing for 4 Hrs after repair complete all as specified and directed Note :- (i) Fan shall be collected by the contractor from MES store yard/site at thier own arrangement. (ii)Motor shall be wound with machine only and repair of fan shall be carried out inside complex / office of GE (S) Mamun. (iii) Khaitan/RPG/KEI or equivallent make super enameled copper winding wire shall only be used. (iv) Rates are deemed to be included cost of repair /servicing & replacement of minor spare part i.e. blade screws, capacitors clamps terminal connection, split pin spring washer etc. (v) Bush, bearing, capacitor, blades, outer body, canopies, lath work shall be measured and paid for separately under respective items as supply only |
| 112 | M&L for taking down & dismantlingceiling fans of capacity 1200/1400mm and servicing by cleaning, greasing / oilingof bush and bearings, replacement of set of split pins, cotter pins, blade screws, cup of both side and refixing to the existing site after servicing complete all specified and directed. (Unserviceable parts if any shall be measured and paid for seperately). |
| 113 | Supply of gun metal bush of ceiling fan complete all as specified and directed. |
| 114 | Supply of capacitor AC 415 volts 2.5 mfd oil filed ISI marked complete all as spd |
| 115 | Supply of ball bearing of suitable size with 8 balls as per existing make and size of ceiling fan complete all as specified and directed. |
| 116 | Supply of fan blades as per existing shape, colour and design suitable for 1200mm sweep ceiling fan of any make complete all as specified and directed. |
| 117 | M&L for taking down exhaust fan 250-380mmsweep from wall, opeing fan body, dismantling fan motortaking out burnt winding by cutting, cleaningslots and re-winding of motor with super enameled heat resistant copper winding wire 31 SWG to 34 SWG including, sleeve work, varnishing with E class insulation, greasing, threading, connection with flexible wire copper wire of suitable size upto connector block and re-assembling and testing for 4 Hrs after repair complete all as specified and directed Note :- (i) Exhaust Fan shall be collected by the contractor from MES store yard/site at thier own arrangement. (ii)Motor shall be wound with machine only and repair of fan shall be carried out inside complex / office of GE (S) Mamun. (iii) Khaitan/RPG/KEI or equivallent make super enameled copper winding wire shall only be used. (iv) Rates are deemed to be included cost of repair /servicing & replacement of minor spare part i.e. blade screws, capacitors clamps terminal connection, split pin spring washer etc. (v) Bush, bearing, capacitor, blades, shutter, lathe work shall measured and paid for separately under respective items as supply only |
| 118 | Removing old paint by scraping from ceiling fan 1200-1400mm sweep with sand paper including washing and filling cavities with filler and applying two coats of paintingat workshop with heat resistant synthetic enamel paint by spray painting incl, writing MES No on the ceiling fans as directed. Note: Paint qaulity and colour shall be got approved from GE. |
| 119 | Supply of outer body of ceiling fan (bottom and uper cover plate incl all fitments such screws, gasket cover canopy of both side etc complete all as specified and directed by Engr-in-Charge and as per site requirement. |
| 120 | Supply of canopy set (top & bottom) of ceiling fan as per existing size & shape complete all as specified and directed. |
| 121 | Supply & fixing in repairs shutter & louver set of exhaust fan as per existing size & shape complete all as specified and directed. |
| 122 | Supply only MS fan bladeof exhaust fan as per existing size & shape complete all as specified and directed. |
| 123 | M&L for lathe work incl re-alignment to rotor, stater sloter, cleaning welding, bracing and polishing etc and refixing after repair and testing complete all as specified and directed |
| 124 | Supply and laying in trenches/along pole/passing through pipe, XLPE electric cable insulated armoured heavy dutywith aluminium counductor of cross sectional area 50 Sqmm 3.5 Core, 1100 volts grade complete all as specified and directed. |
| 125 | Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtrs in depth for laying of cables including getting out in any kind of soil complete all as specified and directed. |
| 126 | Returning filling in including spreading, leveling and well ramming, in layers not exceeding 25 cm each layer of any kind of soil complete all as specified and directed. |
| 127 | Removing surplus excavated material from site not exceeding 50 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point complete all as specified and directed. |
| 128 | M&L for sand cushioning for cables in trenches, laid 8 cm below the cable and 15 cm above the cable all as specified and directed. |
| 129 | Supply & laying old size brick in trenches well burnt, laid flat across the the cable for protection complete all as specified and directed. |
| 130 | Supply and laying in repair GI tubing light grade 50 mm borefor passing through cables under the floor, along the wall or along the pole complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
