New Mangalore Port Trust-NMPT has published Tender For Renovation Of The Sports Council Complex For Setting Up Indoor Sports Facilities At Nmpa. Submission Date for this Tender is 07-03-2024. Sports Complex Tenders in mangalore Karnataka. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Descreption |
| 2 | Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in- charge. In cement mortar |
| 3 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material to the appropriate disposal area as per direction of Engineer-in-charge. Asbestos cement sheet |
| 4 | Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge. |
| 5 | Carefully dismantling the MS Light Tower without damaging the AC sheet roofing, Flooring, cutting it into pieces using gas cutting set, and taking away the dismantled material, dismantling the foundation, taking away the dismantled material including cost of materials, labour, T&P, charges of machinery, transport, etc. all complete as per specifications. |
| 6 | Providing, laying & fixing cement base, precast, pre polished cement concrete, designer tiles 25mm thick conforming to IS 1237 heavy duty tiles for flooring, treads of steps and landing, laid on a bed of 12mm thick cement mortar 1:3 mis finished with flush pointing using white cement, including cost of materials, mortar, including cutting, griding the edge to half/full round wherever required, labour, curing complete as per specification. |
| 7 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. |
| 8 | Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. |
| 9 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS :15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2 including pointing in white cement mixed with pigment of matching shade complete. |
| 10 | Providing and fixingSteel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position andapplyingaprimingcoatofapprovedsteel primer,including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubesincluding cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. |
| 11 | Finishing with Epoxy paint (two coats) at all locations prepared and applied as per manufacturer"s specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work including preparing the surface after thoroughly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. |
| 12 | Providing and fixing to the required line and slope roofing with semi-corrugated fibre roofing day light sheet,fixed with self-tapping screws with washers, over thepurlins, rafters and trusses including cost of materials, labour, complete as per specification. |
| 13 | Providing and fixing of Aluminium composite panel of approved make and colour for wall cladding for Brick/Rcc/stone walls & coloumns/ beams with necessary aluminium frame works at required level made out of 50x25x4mm C section or equivalent. The panel should consist of 3mm thick non-halogenated FR grade mineral based polymer ( 2 hrs fire resistance as per ASTM E119-12 and clause B, S1, do as per ENT 13501-1sandwiched between 0.50 skins thick aluminium sheet making a total panel thickness of 4mm. The surfaces will be finished with PVDF based coating on topsides and service coating on reverse sides would be in polyester paint. The system shall be fixed using GI brackets, aluminium L cleats and stainless steel bolts and nuts complete with spring washer and cap nuts and all other necessary accessories, sealing shall be done with necessary rods etc., complete For Straight Portion |
| 14 | PROVIDING TRAPEZOIDAL PROFILED SHEET Providing and installing of pre painted Galvalume iron Trapezoidal profiled sheet of approved make 1060 mm width (1000 mm cover width), 28-30 mm crest height with crest distance of 200 mm c/c with 2 ribs at the centre for stiffening. The total coated thickness (TCT) of the sheet will be 0.47 mm +/- 0.02 mm tolerance Zinc-Alu Alloy coating AZ150 gsm as per ASTM 1397/A755-550 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 20-22 microns using self-drilling/self-tapping screws of 25 mm length, to be fixed over the existing purlins, rafters, channels and trusses. |
| 15 | Providing and fixing new 9mm PVC laminated false ceiling suspended with the frame work and accessories completed from the roof slab, beams etc. by means of aluminum angles, J bolts, Tee runners and edge trim etc. , cuting the openings for fixing light fittings,including cost of materails, labours, lead and lift finishing etc. complete as per specification. |
| 16 | Providing and fixing aluminium work for doors, windows, ventilators andpartitionswithextrudedbuiltupstandardtubularsections/ appropriate sections and other sections of approved make conforming toIS:733andIS:1285,fixingwithdashfastenersofrequireddia andsize,includingnecessaryfillingupthegapsatjunctions,i.e. attop,bottomandsideswithrequiredEPDMrubber/neoprene gasket etc. Aluminum sections shall be smooth, rust free, straight, mitredandjointedmechanicallywhereverrequiredincludingcleat angle, Aluminumsnapbeadingforglazing/paneling,C.P.Brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For Fixed Portion: Powder coated aluminum (minimum thickness of powder coating 50 micron) including cost of materials, labour, usage charges of machinery complete as per specifications. |
| 17 | Providingandfixing12mmthickpre laminatedparticleboardflat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in paneling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in- charge: Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side including cost of materials, labour, usage charges of machinery complete as per specifications. |
| 18 | Providing and fixing UPVC Gutter pipe, 200mm width, fitted with UPVC support saddles fitted to the edge Galvalume roofing sheet with proper slope towards the down take pipe to facilitate easy flow of rain water including cost of all materials, labour, transportation, T&P, etc. all complete |
| 19 | KSRB13-8: Providing and fixing to wall, ceiling and floor, medium densitypolyethylene pipes6.00kgs/sq.cmworkingpressureof outside diameter with special flange, compression type fittings, wall clips, making good the wall, ceiling and floor including cost of all materials, labour charges, HOM and testing complete as per specifications. KSRB 13-8.9: do-110 mm dia Specification No. KBS 13.2.15.1 I 13.9 for internal water supply connection |
| 20 | Providing and Fixing in position PVC mesh, Heavy gauge foldable, UV stabilized 800GSM anti bird net, including all fixtures, transportation, fixing to MS square poles, etc. complete. |
| 21 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One coats on old work as per specifications and as per directions of Engineer in charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
