Building Construction Department-BCD has published Tender For Renovation Of Inside Painting Work And Furnishing Supply Of Furnitures Work Of Main Building Including Other Miscellaneous Work In The Premises Of Honble Judges Guest House Bunglow No-132 At Doranda, Ranchi High Court Pool. Submission Date for this Tender is 22-02-2024. Furnishing Work Tenders in ranchi Jharkhand. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Providing two coats of plastic emulsion paint of approved shade and make over old surface including washing, cleaning and preparing the walls, scafolding, washing of floor and taxes all complete as per building specification and direction of E/l. |
| 2 | Providing 12mm cement plaster (1:6) with clean coarse sand of FM 1.5 including screening, curingwithall leadsand liftsof water, scaffolding taxes and royalty all complete as per building specification and direction of E/l. |
| 3 | Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 4 | Chequered terrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) : Light shade pigment using white cement |
| 5 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 6 | Earthwork in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance upto 50 M. including all lifts, levelling, ramming the foudation trenches, removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/l. |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering & shuttering : All work up to plinth level : 1:2:4(1 cement : 2 coarse sand (zone - III) : 4 garded stone aggregate 20mm nominal size) |
| 8 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete : Hot finished welded type tubes |
| 9 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required : 0.80 mm thick with zinc coating not less than 275 gm/m² |
| 10 | Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 0.80 mm thick with zinc coating not less than 275 gm/m² |
| 11 | Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing rust , dirt, , scales , smokes and grease and cleaning the surface thoroughly including cost of scaffolding and taxes all complete as per building specification and direction of E/l. ( Mode of measurement Area shall be multiplied by the co-efficient as indicated in building specification) |
| 12 | Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direciton of E/l. |
| 13 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick |
| 14 | Providing and laying matt finished vitrified tile of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. |
| 15 | Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal and transverse direction as 300/ 250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 3mm thick |
| 16 | Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. 4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Finalo coat to be done in 1 or 2 layers without gap of time.) |
| 17 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite stone slab all colour and texture except black, Cherry/ Ruby red Area of slab upto 0.50 sqm |
| 18 | Providing and fixing machine cut, mirror/ eggshell polished , Marble stone work for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge : 18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadore etc. |
| 19 | Carriage of materials from nearest approved sources of supply including loading into trucks and unloading from trucks and stacking properly at work site as directed by E/I |
| 20 | Sand (Lead 8 km) |
| 21 | Chips (Lead 22 KM) |
| 22 | Supply, fitting and fixing of wardrobe/almirah of DURIAN 1400x1200mm (WxH) wooden almirah made up of commercial block board MR grade conforming to IS 1659 all required fittings all complete as per building specification and instruction of E/I Product ID-5116877-39518875390 |
| 23 | Providing, fitting and fixing royal pattern PVC printed wall paper as per building specification and instruction of E/I |
| 24 | Supply of Star Homz 215 centimeter x C1112M 135 centimeter (L x W) Bleached, White Bed Sheets as per building specification and instruction of E/I all completer Product ID-5116877-44499869733 |
| 25 | Supply of blanket of approved quality and shade all complete as per building specification and instruction of E/I Product ID-5116877-60420535554 |
| 26 | Supply of WELSPUN 150x75 cm cotton towel of approved shade all complete as per building specification and instruction of E/I Product ID-5116877-84115942142 |
| 27 | Supply of GLAM DECOR Non-Revolving and Non-Tilting chair with Armrest all complete as per building specification and instruction of E/I |
| 28 | Supply of Bharat Bhushan & co. Revolving Chair With Arm Knee tilt Synchronic mechanism all complete as per building specification and instruction of E/I Product ID-5116877-53646297311 |
| 29 | Supply of POJ Other Wood 4 Seater Dinning Table all complete as per building specification and instruction of E/I |
| 30 | Supply of Nilkamal Pillow of approved shade and quality all complete as per building specification and direction of E/I Product ID-5116877-13637580911 |
| 31 | Supply of round centre table of approved design and brand all complete as per building specification and instruction of E/I Product ID-5116877-64151151139 |
| 32 | Supply of HARLISION Rectangular CENTRE TABLE with Ply wood Top of 914mmX609mm all complete as per building specification and instruction of E/I Product ID-5116877-70251434962 |
| 33 | Supply of CS cosmic solution three seater sofa with leather cover as per building specification and instruction of E/I all completer Product ID-5116877-99632886049 |
| 34 | Supply of Doris Fray Two Single seater sofa with leather cover as per building specification and instruction of E/I all completer Product ID-5116877-94587680836 |
| 35 | Supply of RK EMPIRE Revolving Chair With Arm Multi-function tilt mechanismall complete as per building specification and instruction of E/I Product ID-5116877-55820318694 |
| 36 | Supply of single FURNHARDT N.A Bed side table as per building specification and instruction of E/I all complete Product ID-5116877-98031475322 |
| 37 | Supply of single OREVA Metal Dial And Hands Wall Clocksas per building specification and instruction of E/I all complete Product ID-5116877-88569550805 |
| 38 | Supply, fitting and fixing of Decor Cotton Floral Door/Window Curtains all complete as per building specification and instruction of E/I Product ID-5116877-80447303087 |
| 39 | Providing, fitting and fixing ACE embossed texture and single suded Uv protection and multi wall and Supply, both side Uv protection and special treatment and translucent and opaque on request and double wall and polycarbonate sheet as per building specification and instruction of E/I |
| 40 | Add 18 % GST (in Basic Rate must fill 12) |
| 41 | Add 1% Labour Cess (in Basic Rate must fill 1) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
