Military Engineer Services-MES has published Tender For Repair/ Maintenance Of Sluice Valve, Non Return Valve , Water Supply Lines (Ci/Gi/Di/Ppr), Raising And Delivery Lines And Misc Works At D-Iii And D-Ib Zone Under Age E/M-Ii Of Ge (N) Mamun. Submission Date for this Tender is 12-03-2024. Sluice Valve Tenders in mamun Punjab. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 05-Mar-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 12-03-2024 |
| Sl. No. | Item Description |
| 1 | Excavationin trenchesn.exc 1.5mtr wideand n.exc 1.5mtr deep in soft/loose soil and gettingoutfor laying of pipes complete all as specified and directed. |
| 2 | Returning, filling in trenches including , spreading, levelling, watering and well ramming in layers n.exc 25cm thick complete all as specified and directed. |
| 3 | Removal of surplus soilto a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed. |
| 4 | Taking out CI/DI/MS pipe 200 mm bore in any type, any length including fittings, control valves from the trenches/on pillars or in any condition, burning of lead joints for recovery of lead and cleaning, flushing segregation, stacking for including depostingthe unserviceable pipes/cut pieces complete all as specified and directed. (Excavation and earth work shall be measured and paid for separately). |
| 5 | All as per Srl item No 04 above but size of pipe 150mm bore. |
| 6 | All as per Srl item No 04 above but size of pipe 100 mm bore. |
| 7 | Re-laying in trenches old cast iron pipe 200 mm bore with socket and spigot ends complete with all new fittings after cleaning thoroughly, removal of all blockages by using splitted bamboos/steel rod effectively (pipe taken out/obtained from items here in before) complete all as specified and directed. |
| 8 | All as per Srl item No 07 above but 150mm bore |
| 9 | All as per srl item No 07 but 100mm bore |
| 10 | Taking out existing unserviceable/serviceable GI Pipe 80mm borefrom the trenches including disconnecting branch connections, fittings and control valves complete all as specified and directed. (Excavation and earth work shall be measured and paid for separately). |
| 11 | All as per srl item No 10 above but50 mm bore |
| 12 | All as per srl item No 10 above but40 mm bore |
| 13 | All as per srl item No 10 above but 25mm bore |
| 14 | All as per srl item No 10 above but 20mm bore |
| 15 | All as per srl item No 10 above but 15 mm bore |
| 16 | Re-laying only old serviceable GI Pipe 80mm bore obtained from srl no 11 aboveincluding all new GI fittings as per site requirement complete all as specified and directed. |
| 17 | All as per Srl item No 16 but 50 mm bore |
| 18 | All as per Srl item No 16 but 40 mm bore . |
| 19 | All as per Srl item No 16 but 25 mm bore |
| 20 | All as per Srl item No 16 but 20 mm bore |
| 21 | All as per Srl item No 16 but 15 mm bore |
| 22 | Supply and laying in trenches or on pillars DI pipe 200 mm bore centrifuglly cast class K7 s/s including rubber gasket/ Tyton joints with jointing material,in any length laid in trenches complete all as specified and as directed. (Excavation/earth work if required, shall be measured and paid for separately). |
| 23 | All as per Srl item No 22above but 150 mm bore |
| 24 | All as per Srl item No 22 above but 100 mm bore . |
| 25 | Supply and laying in trenches/on piller GI Pipe 80 mm boremedium grade ISI marked including all fitting (Tee, elbow, plug, bend, reducer socket,union socket or nipple socket etc )laid in trenches/pillar/on wall complete as per site requirement complete all as specified and as directed. |
| 26 | All as per Srl item No 25 above but 50mm bore |
| 27 | All as per Srl item No 25 above but 40mm bore |
| 28 | All as per Srl item No 25 above but 25 mm bore |
| 29 | All as per Srl item No 25above but 20mm bore |
| 30 | All as per Srl item No 25above but 15 mm bore |
| 31 | M&L in replacement of GI fittings (ISI marked) such as Tee, elbow, plug, bend, reducer socket, union socket, nipple socket etc suitable for 15 mm to 80 mm bore pipe complete all as specified and directed. |
| 32 | Supply and fixing DI/CI fittings such as bends, tees, tapers, tailpieces, flanges, collars etc of any size and shape as per site requirement confirming to IS-1538 laid upto 200 mm on trenches/on pillers complete all as specified and directed. |
| 33 | Taking out existing unserviceable/serviceable PPR pipe 50mm bore from the trenches including disconnecting branch connections, fittings and control valves complete all as specified and directed (Excavation and earth work shall be measured and paid for separately). |
| 34 | All as per srl item No 33 above but 40mm bore |
| 35 | All as per srl item No 33 above but 25mm bore |
| 36 | All as per srl item No 33 above but 20mm bore |
| 37 | Supply and laying 3-layer PP-R Polypropylene random copolymer concealed pipes 50 mm bore SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass treaded polypropylene random fittings laid in trenches complete all as specified and directed. (Note :- Machine shall be brought at site for joint by the Contractor for which cost deemed to be included in the rate). |
| 38 | All as per srl item No 37 above but 40mm bore |
| 39 | All as per srl item No 37 above but 25mm bore |
| 40 | All as per srl item No 37 above but 20mm bore |
| 41 | Supply and fixing cast iron sluice valve PN-1.6,200mm bore with steel spindle and CI wheel flanged ends drilled holes including jointing material such as rubber gaskets, bolts, nuts & washers ofsuitable size complete all as specifed and directed. |
| 42 | All as per Srl item No 41 above but 150mm bore |
| 43 | All as per Srl item No 41 above but 100mm bore |
| 44 | All as per Srl item No 41 above but 80mm bore |
| 45 | Supply and fixing cast iron non return valve 200 mm bore flanged ends drilled holes including jointing material such as rubber gasket, bolts, nuts and washers of suitiable size including taking out existing non return valve and removal complete all as specified and directed. |
| 46 | All as per srl item 45 above but 150 mm bore |
| 47 | Supply and fixing Gun metal gate valve 50mm bore dia with iron wheel head, screwed both ends for iron pipe fixing heavy duty ISI marked complete all as specifed and directed. |
| 48 | All as per srl item 47above but 40mm bore dia |
| 49 | All as per srl item 47 above but 25 mm bore dia |
| 50 | All as per srl item 47 above but20 mm bore dia |
| 51 | All as per srl item 47 above but15 mm bore dia |
| 52 | Supply and fix in replacementPP-R Gate valves25 mm bore (brass insert) as per requirement of the site complete all as specifed and directed. |
| 53 | All as per srl item No 52 above but 20 mm bore |
| 54 | All as per srl item No 52 above but 40mm bore |
| 55 | M&L for Repair to Non Return Valve 200 mm borein position and S&F in replacement of U/S Parts such as brass ring packing/Rubber packing, nuts,bolts, washers, rubber insertion sheet complete all asas required to make it fuctional complete all as specifed and directed. |
| 56 | All as per srl item 55 above but 150 mm bore |
| 57 | M&L for Repair & Opening stuffing box of sluice valve 200 mm bore and S&F in repair of U/S parts i.e. Stainless steel spindle, check nut fabricated out of superior quality all as per sample as required at site including replacement of unserviceable bolts, nuts & washers gaskets etc complete all as specifed and directed. |
| 58 | All as per Srl item No 57 above but 150mm bore |
| 59 | All as per Srl item No 57 above but 100mm bore |
| 60 | All as per Srl item No 57above but 80mm bore |
| 61 | M & L for repair to leaking lead/tyton/flanged joint of any bore CI/DI pipe line by cocking and inserting extra lead/tyton/gasket/nut bolts if required and making good /leakless the existing joint, including necessary excavation and earth work, (returning filling will be done after testing the joint) complete all as specifed and directed. |
| 62 | M & L for repair to leaking fusion joint of PP-R pipe 3-layer of any dia including providing PP-R fittings as required at site and making good /leakeg the existing joint, including necessary fittings if required & excavation and earth work, (returning filling will be done after testing the joint) complete all as specifed and directed. (Note :- Machine shall be brought at site for joint by the Contractor for which cost deemed to be included in the rate) |
| 63 | M & L for repair to leaking/block/broken and cleaning of any dia, GI pipe line by inserting extra fittings/nut bolts if required, making good leakless the existing joint, including necessary excavation and earth work, (returning filling will be done after testing the joint) complete all as specifed and directed. |
| 64 | M&L for brick masonary valve pit of size 1200x1200x1200 mm (internal dimensions of chamber) including 23cm thick wall built in CM 1:6, 15mm thick plain cement plaster internally in CM 1:4 and flush pointing externally as the work proceeds, PCC 1:5:10 type E2 in foundation 156x156cm size 40mm thick PCC 1:2:4 type B-1 in floor, 50mm thick PCC 1:2:4 as coping over brick work, MS sheet cover with locking arrangement inluding lock of size 112x112cmx3 mm thick fixed to angle frame made out of 40x40x3mm angle iron,MS handle to sheet cover, MS hinges welded to frame and sheet cover, painted with two coats of synthetic black paint over a coat of red oxide primer on steel work(internal and externally on steel work), two coats of white wash on plaster work including excavation and earth work in any type of soil complete all as specified and directed. |
| 65 | All as per Srl item No 64 above butsize 900x900x900 mm with suitable other diamentions |
| 66 | All as per srl item No 64 above but size 600x600x600 mm with suitable other diamentions. |
| 67 | Supply and filling in item No-S411AE, item type C, item name STEQUA411 AE refill, of Declibac specification :- Chlorine tablets contained in plastic cylindrical sealed disposible sanitiser refill for disinfection of drinking water with arrengements of controlled release of disinfection in weter, suitable for operation through recommeneded dosing system. replacement indication- visual and weight variation operation type non contact non inhalatory, heavy metal contaminants (like Hg and Pb) in product madia must be below detection limit (BDL) and product must pass through acute toxicity test, based on which the product must be considered safe to use from human health safety point of view when use in recommended dosage, all as specified and directed . Make :- Declibac technologies Pvt Ltd/Potter and watts/Brio Zing as approved |
| 68 | S& F in rolled Mild steel plates of FE 410 -10 (Gde-E 250) quality-A (Plain) thickness not less than 3mm (UG Sump/OHT/valve chamber cover) as required size including cover welded around with MS flat iron of required size with locking arrangements including painting with two coats of synthetic enamel paint over a coat red oxide primer including taking down existing MS work complete all as specified. |
| 69 | M&L for Opening and repairs of Gun metal gate valve, S&F in replacement of U/S parts i.e. spindle, iron wheel head, screwed both ends, check nut & washers suitable size outfabricatedof superior quality etc. all as per sample as required at site for 50/40mm bore dia size of gate valves complete all as specified. |
| 70 | All as per srl item 69 above but15/20/25 mm bore dia |
| 71 | Cleaning vegetation including grass, bushes, small trees and all vegetation growth complete including digging out the root of bushes,small trees around the Installation/Sump/OH reservoir, valve chamber, including chamber etc fillingthe rough holes with earth, levelling the surfaces by removing all debristo a distance n.exc 50m complete all as specified and directed. |
| 72 | M & L for Cutting and trimming of tree branches of girth upto 100 mm dia and 3 mtr all around of any size over head tank/UG sump including removing trimmed tree branches complete all as specified and directed. Note :- Each cut shall be measured and paid |
| 73 | M&L for preparation of old painted iron/ steel surface by removing oil, dirt, rust and scraping etc and applying one coat of synthetic enamel paint manually with Black/blue colour of Main Header ( water mains distribution system comprising of sluice valves upto 400 mm dia) including end plates complete all as specified and directed. |
| 74 | Supply and filling in dozing plant calcium based, high strength chlorination chemical for water disinfectant in granular form in factory sealed HDPE container (40 to 50 Kg each), chlorine concentration level 65-70% complete all as specified and directed. |
| 75 | M/L for bacteriological and chemical analysis of water (sample of borewell water) from DIRECTOR OF HEALTH SERVICES, ENVIRONMENTAL AND POLLUTION CONTROL WING, Pathankot NOTE : (a) The water sample shall be carried in sterilised bottle/watercan which will be issued by DIRECTOR OF HEALTH SERVICES, ENVIRONMENTAL AND POLLUTION CONTROL WING, Pathankot (b) The rate quoted shall be deemed to included transportation cost & cost of sterilised bottle |
| 76 | Dismantling of mild steel work of any description including cutting, welding etc and S&F mild steel framed work such as ladders, walkways, railings, framework of water suplly installation and similar work confirming to FE-290, Grade E-165 including necessary welding, fixing with necessary cement work, including painting with two coats of synthetic enamel paint over a coat red oxide primer complete all as specified and directed. |
| 77 | S&F in repairs smart integrated solar street light 20 W including galvanized steel pole (pole length not less then 6 mtrs) in built in Mono Crystalline panel, Lithium Ferro Phospate battery, MPPt Charge Controller and PIR sensor with colour Temperature including necessary fixing arrangement by providing with necessary nuts, bolts and washers etccomplete all as specified |
| 78 | M & L for painting to valve chamber of any size (not more than 1200x1200mm) with two coats of antifungal exterior emulsion paint inside and outside of chamber, two coats of synthetic enamel paint over one coat of red oxide primer on chamber cover, cleanign/removing small bushes and grass inside & outside of valve chamber complete all as specified and directed |
| 79 | M&L for preparation old steel painted surface and painting with one coat of synthetic enamel paint to sluice valve, NRV and suction and delivery pipe line(of any size/capacity, length n exc 5 meter) as per the existing colour code (blue/black) completeall as specified and directed. |
| 80 | Deduct Total amount of SCHEDUL "A" SECTION-II (SCH OF CREDIT) Rs 2,12,197.00 ( to be deducted from Schedule ‘A’ (BOQ) to arrive at the Contract Sum. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
