Tender For India Mark 2 Hand Pump Spare Part ,G. I. Pipes And Hand Pump Set Purchasing Work, akola-Maharashtra

Tender For India Mark 2 Hand Pump Spare Part , G. I. Pipes And Hand Pump Set Purchasing Work- 1 Reducer Cap For Cylinder Of Deep Well Hand Pump Is 9301 / 1990 2 Cylinder Body With Brass Liner For Deep Well Hand Pumps ( Is 9301 / 1990 ) 3 Upper Valve For Deep Well Hand Pumps ( Is 9301 / 1990 ) 4 Check Valve For Deep Well Hand Pumps ( Is 9301 / 1990 ) 5 Check Valve Seat For Deep Well Hand Pumps ( Is 9301 / 1990 ) 6 Specer For Deep Well Hand Pumps ( Is 9301 / 1990 ) And Deep Well Hand Pumps ( Vlom ) ( Is 130561 / 1991 ) 7 Rubber Seat Retainer For Deep Well Hand Pumps ( Is 9301 / 1990 ) 8 Front Cover For Deep Well Hand Pumps ( Is 9301 / 1990 ) And Deep Well Hand Pumps ( Vlom ) ( Is 130561 / 1991 ) 9 Head For Deep Well Hand Pumps ( Is 9301 / 1990 ) And Deep Well Hand Pumps ( Vlom ) ( Is 130561 / 1991 ) 10 Third Plate For Deep Well Hand Pumps ( Is 9301 / 1990 ) And Deep Well Hand Pumps ( Vlom ) ( Is 130561 / 1991 ) 11 Chain With Coupling For Deep Well Hand Pumps Is 9301 / 1990 ) 12 Handle For Deep Well Hand Pumps ( Is 9301 / 1990 ) 13 Connecting Rods For Deep Well Hand Pumps ( Is 9301 / 1990 ) 14 Water Tank For Deep Well Hand Pumps ( Is 9301 / 1990 ) 15 Pump Bucket ( N ) For Deep Well Hand Pumps ( Is 9301 / 1990 ) 16 Rubber Seating ( Upper Valve ) For Deep Well Hand Pump ( Is 9301 / 1990 ) 17 Rubber Seating ( Lower Valve ) For Deep Well Hand Pumps ( Is 9301 / 1990 ) 18 Sealing Ring For Deep Well Hand Pumps ( Is 9301 / 1990 ) 19 ‘O’ Ring For Deep Well Hand Pumps ( Is 9301 / 1990 ) 20 Handle Axle For Deep Well Hand Pumps ( Is 9301 / 1990 ) 21 Cylinder Assly Comp. Unit ( Inclusive Of Stainless Steel Plunger Rod 12 Mm Dia. With Nitrite Rubber, Pump Bucket ) Suitable For Deep Well Hand Pumps –Ii 22 Single Side Shielded Bearing Confirming To Is 6455 / 1972 Suitable For Deep Well Hand Pumps ( Skf Make ) 23 Hex. Bolt M 12X20 As Per Is 1363 / 1984 24 Hex. Bolt M 12X40 As Per Is 1363 / 1984 25 Hex. M 12 Nut 26 Chain High Tensile Bolt M 10X 1.5 X 40 Is 1365 Bolt 27 Chain High Tensile Nutm-10 28 Brass Liner As Pev. Is 4071 / 1981 Suitable For Deep Well Hand Pumps Im – Ii ( Brass Liner ) 29 Upper Valve Assly With 2 Nos. Nit Rubber Pump Buckets And Comprising Of Pulnger Yoke Body, Upper Valve Rubber Seating Spacer Follower Suitable For Deep Well Hand Pumps Im – Ii 30 Lower Valve Assly Comp Suitable For Deep Well Hand Pumpsim – Ii 31 Leather Pump Bucket Washer For Im Ii Suitablefor Deep Well Hand Pumps Original “ Shakti Make” 32 Rod Coupeling For Suitable Deep Well Hand Pumps 33 32 Mm G.I. Pipe Coupling 34 Handpump Body Complete –Im 2 35 32 Mm X3 Mtr Length Hot Dip Galvanized Screwed And Socked Pipe. One End Of The Riser Pipe Should Be Fitted With Hot Dip Galvanized Coupler And Other End With Thread Protector. Pipe Supply Should Haveis1239 Markembosed On It 36 Manufacture Supply And Delivery Of Bis Marked Fully Hot Galvanized Deep Well Hand Pump ( India Mark-Ii ) Assembly Complete Unit With 12 Nos. Of Connecting Rods ( Bright Bar ) Of 12 Mm Dia. 3 Mtrs. Length Each Confirming To Is 15500 With Is Amends / Revisions Up To Date And 12 Nos ( 36 Mtrs ) 32 Mm X3 Mtr Length Hot Dip Galvanized Screwed And Socked Pipe. One End Of The Riser Pipe Should Be Fitted With Hot Dip Galvanized Coupler And Other End With Thread Protector. Pipe Supply Should Haveis1239 Markembosed On It Including Bis Packing Loading, Unloading And Stocking Charges To The Zilla Parishad Gsda Stores May Any Where In Maharashtra State. The Component Identification And Manufactures Identification Mark Shall Be As Per Bis Specifications With Telexcopic Stand Assembly In Live Of Normal Stand For 150 M.M Dia Bore Wells.

INR 3000 /-

INR 30000.0 /-

Refer document

Name of Work: INDIA MARK 2HAND PUMP SPARE PART ,G. I. PIPES AND HAND PUMP SET PUCHASING

Sl. No.	Item Description
1	Reducer cap for cylinder of Deep well hand pump IS 9301/1990
2	Cylinder body with brass liner for Deep well Hand pumps ( IS 9301/1990 )
3	Upper valve for Deep well Hand pumps ( IS 9301/1990 )
4	Check valve for Deep well Hand pumps ( IS 9301/1990 )
5	Check valve seat for Deep well Hand pumps ( IS 9301/1990 )
6	Specer for Deep well Hand pumps ( IS 9301/1990)and Deep well Hand pumps (VLOM) ( IS 130561/1991 )
7	Rubber seat retainer for Deep well Hand pumps ( IS 9301/1990 )
8	Front cover for Deep well Hand pumps ( IS 9301/1990 )and Deep well Hand pumps ( VLOM )( IS 130561/1991 )
9	Head for Deep well Hand pumps ( IS 9301/1990 ) and Deep well Hand pumps ( VLOM ) ( IS 130561/1991 )
10	Third plate for Deep well Hand pumps ( IS 9301/1990 )and Deep well Hand pumps ( VLOM )(IS 130561/1991 )
11	Chain with coupling for Deep well Hand pumps IS 9301/1990 )
12	Handle for Deep well Hand pumps ( IS 9301/1990 )
13	Connecting rods for Deep well Hand pumps ( IS 9301/1990 )
14	Water tank for Deep well Hand pumps ( IS 9301/1990 )
15	Pump bucket (n) for Deep well Hand pumps ( IS 9301/1990 )
16	Rubber seating ( upper valve ) for Deep well Hand pump ( IS 9301/1990 )
17	Rubber seating ( Lower valve ) for Deep well Hand pumps ( IS 9301/1990 )
18	Sealing ring for Deep well Hand pumps ( IS 9301/1990 )
19	‘O’ ring for Deep well Hand pumps ( IS 9301/1990 )
20	Handle axle for Deep well Hand pumps ( IS 9301/1990 )
21	Cylinder Assly comp. Unit ( Inclusive of stainless steel plunger rod 12 mm dia. With nitrite rubber, Pump bucket ) suitable for Deep well Hand pumps –II
22	Single side shielded bearing confirming to IS 6455/1972 Suitable for Deep well Hand pumps ( SKF make )
23	Hex. Bolt m 12x20 as per IS 1363/1984
24	Hex. Bolt m 12x40 as per IS 1363/1984
25	Hex. M 12 Nut
26	Chain High tensile Bolt M 10x 1.5 x 40 IS 1365 Bolt
27	Chain High tensile nutM-10
28	Brass liner as pev. IS 4071/1981 suitable for Deep well Hand pumps IM – II (Brass Liner)
29	Upper valve Assly with 2 Nos. Nit rubber pump buckets and comprising of pulnger yoke body, upper valve rubber seating spacer follower suitable for Deep well Hand pumps IM – II
30	Lower valve Assly comp suitable for Deep well Hand pumpsIM – II
31	Leather pump bucket washer for IM II suitablefor Deep well Hand pumps original “ Shakti Make”
32	Rod coupeling for suitable Deep well Hand pumps
33	32 mm G.I. Pipe Coupling
34	Handpump Body complete –IM 2
35	32 mm x3 mtr Length hot dip galvanized screwed and socked pipe. One end of the riser pipe should be fitted with hot dip galvanized coupler and other end with thread protector. pipe supply should haveIS1239 markembosed on it
36	Manufacture supply and delivery of BIS marked fully hot galvanized Deep well hand pump ( India mark-II)assembly complete unit with 12 Nos. of connecting rods ( Bright bar ) of 12 mm dia. 3 mtrs. Length each confirming to IS 15500 with is amends / revisions up to date and 12 nos (36 mtrs) 32 mm x3 mtr Length hot dip galvanized screwed and socked pipe. One end of the riser pipe should be fitted with hot dip galvanized coupler and other end with thread protector. pipe supply should haveIS1239 markembosed on it including BIS packing loading, unloading and stocking charges to the Zilla Parishad GSDA stores may any where in Maharashtra state. The component identification and manufactures identification mark shall be as per BIS specifications with telexcopic stand assembly in live of normal stand for 150 m.m dia bore wells.