Tender For Supply Of Material, Design, Erection, Testing, Commissioning For Providingprov. Sop To Wss Scheme Baba-Kathak In E Sec Sakri Uesd Kudail Under Electrical Division Hpsebl Baijnath ( Seop-59/2023-24)., kangra-Himachal Pradesh

Tender For Supply Of Material, Design, Erection, Testing, Commissioning For Providingprov. Sop To Wss Scheme Baba-Kathak In E Sec Sakri Uesd Kudail Under Electrical Division Hpsebl Baijnath ( Seop-59 / 2023-24 ) .-Cost Of 11Kv Ht Line 2 Aaac 7 / 3.81 Mm ( 80Mm² ) 3 Steel Tubular Pole ( 9 Mtr. ) 4 Muffs With Concerete Filling 5 Run Thro Structures ( ? Formation ) : On Single Pole Structures ( Adopt Eight ( 8 ) No. Run -Through Structures Per Km ) - 6 Cross Arm: [ Channel Iron ( 100X50x6 Mm ) , Length ( 1270 ) Mm I / C Tolerance Of 100Mm Either Side X 8 Structure 7 Angel Iron ( 50X50x6 Mm ) , Length ( 2X750 ) Mm X 8 Structure 8 Pole Top Bracket 9 11 Kv Pin Insulators ( Porcelain, 12 Kv, 10 Kn ) : 3 No Per Pole Structure 10 Dead End Structures: ( Adopt Three ( 3 ) No. Per Km ) On Double Pole ( Prefer Along Road Side ) 11 Belt Set- Ms Angle Iron : 50X50x6, Length 1800Mm X 2 No. 12 X-Bracing Set - Ms Angle Iron: 50X50x6, Length [ 2125 Mmx 2 No. ] 13 X-Arm ( Horizontal ) - Ms Channel Iron: 100X50x6, Length 2340Mm X 2 No. 14 Discs Insulator Sets On Dead End Structures ( Comprising 1 No. Disc: ( Porcelain, Bs, 12 Kv, 80 Kn ) Including Dead End Clamps Etc. ) X ( 3 No. Conductors ) X ( 2 No. Sides ) 15 11Kv Pin Insulators 16 Ht Stay / Guy Arrangement 17 Stay Set Complete In All Repect ( 1 No. / Single Pole, 4 No. / Double Pole Structures ) 18 Stay Wire ( 7 / 3.15 Mm ) ( 6.0 Kg Per Stay Set ) 19 Earthing 20 Ht Earthing Set Complete 21 Gi 8 Swg Earth Wire 22 Cross Lacing 23 Eye Hook For Earth Wire 24 Earth Wire Clamp 25 Ms Channel Iron 75*40*6, Length 1500 Mm For Earth Wire 26 Half Clamp 27 Full Clamp 28 Danger Plate ( 250X200x1.6 Mm ) 29 Nuts And Bolts Of Various Sizes ( Galvanised / Coated ) [ Preferably 16 Mm F Or More ( With Flat And Spring Washers ) ] 30 Barbed Wire 31 Red Oxide 32 Alluminium Paint 33 Erection Charges Complete In All Respect 34 Transportation Charges 35 Cost Of 250Kva 36 Distribution Transformer ( Ordinary ) , 11 / 0.4 Kv, 250Kva 37 Steel Tubular Poles ( 9 M, Working Load > 200 Kgf / M² ) 38 Muffs With Concerete Filling 39 X-Arm: [ Channel Iron ( 100X50x6 Mm ) , Length : 2800 Mm X 2 Nos ] 40 Ms Angle Iron ( 50X50x6 Mm ) , Length : 2800 Mm X 1 Nos ] For LaS 41 X-Arm: [ Channel Iron ( 75X40x6 Mm ) , Length : 2800 Mm X 4 Nos ] For Supporting Do Fuse Unit & Go Switch 42 Transformer Bed, Belting & Knee Bracing 43 X Arm Channel Iron ( 100X50x6 Mm ) , Length : 2800 Mm X 2 Nos For Transformer Bed 44 X Arm Channel Iron ( 100X50x6 Mm ) , Length : 460 Mm X 2 Nos For Supporting Main Channel Of Transformer 45 Ms Angle Iron ( 50X50x6 Mm ) , Length : 2800 Mm X 2 Nos 46 Ms Angle Iron ( 35X35x5 Mm ) , Length : 460 Mm X 2 Nos 47 Ms Angle Iron ( 50X50x6 Mm ) , Length : 950 Mm X 2 Nos For Bed Knee Bracing 48 Ct-Pt Combined Unit With Ht Meter 49 Ct-Pt Combined Unit [ Pt:11 Kv / 110 V ) ; Ct:10-400 / 5A ] 50 Energy Meter 3 Phase 4 Wire Ct Pt Operated Ht Meter 51 Pvc Multistrand 4 Mm² Copper Wire With F-1 Inch Gi 52 X-Arm: [ Channel Iron ( 100X50x6 Mm ) , Length : 2800 53 X-Arm: [ Channel Iron ( 75X40x6 Mm ) , Length : 2800 Mm 54 X-Arm [ Channel Iron ( 100X50x6 Mm ) , Length : 460 Mm 55 Ms Angle Iron ( 50X50x6 Mm ) , Length: 2800 Mm X1 Nos 56 Transformer Lt Distribution Box And G.O. Fixing Assembly 57 Ms Angle Iron ( 50X50x6 Mm ) , Length : 2800 Mm X 2 Nos 58 Ms Angle Iron ( 50X50x6 Mm ) , Length : 450 Mm X 1 Nos 59 Go Switch Handle Supporting ( Channel Iron ( 75X40x6mm ) , Length 460Mm 60 Go Ab Switch Unit ( 11Kv, 400A, 25 Ka ) Tripple Pole O / D Type 61 D.O Fuse Unit 62 Surge Arrester, 9 Kv Station Class ( Porcelain Type ) 63 Discs Insulator Sets ( Comprising 1 No. Disc: ^^ ( Porcelain, Bs, 12 Kv, 90 Kn ) Including Dead End Clamps Etc. ) 64 Stay Set Complete 65 Stay Wire ( 7 / 3.15 Mm ) ( 7.0 Kg Per Stay Set ) 66 Pipe Earthing Set 67 Lt Distribution Panel Boxwith Mccb And Sfu For 250 Kva 68 Half Clamp ( M.S. Flat 50X6 Mm ) 69 Full Clamps ( M.S. Flat 50X6 Mm ) 70 Nuts And Bolts Of Various Sizes ( Galvanised / Coated ) [ Preferably 16 Mm F Or More ( With Flat And Spring Washers ) ] 71 Aluminium Thimble 72 Aluminium Thimble 73 Danger Plate 74 Barbed Wire 75 Lt Cable ( 3.5 Core ) 185 Mm² 76 ( A ) Aluminium Paint. 77 Lt Switched Capacitors 9 Kvar For 250 Kva ( Rate Per Kvar ) 78 Transformer Bed ( Civil Work ) & Chain Link Fencing , Angle Iron , Gate Etc For Transformer Fencing 79 Erection Charges Complete In All Respect. 80 Transportation Charges 81 Cost Of Lt Line 82 Lt Ab Cable 3 X 95+70 Mm ( Double Circuit ) 83 Steel Tubular Poles ( 8 Mtr ) 84 Muffs With Concerete Filling 85 Angle Iron ( 75X75 X6 ) Mm2 Length 1.50 Mtr + 0.02 Mtr 86 Capacitor Bank 36 Kvar 87 Cross Arm: [ Channel Iron ( 100X50x6 Mm ) , Length ( 1270 ) Mm I / C Tolerance Of 100Mm Either Side X 8 Structure 88 Lt Stay Set 89 Stay Wire ( 7 / 3.15 Mm ) 90 Full Clamp [ 2 No. For A.I. 1No. For Stay ] 91 X-Arm ( Horizontal ) - Ms Channel Iron: 100X50x6, Length 2340Mm X 2 No. 92 X-Bracing Set - Ms Angle Iron: 50X50x6, Length [ 2125 Mmx 2 No. ] 93 Kit Kat I.C. 94 Earthing Set Complete 95 Anchoring Assembly 96 Suspension Assembly 97 Earth Knob 98 Nuts And Bolts Of Various Sizes 99 Aluminium Paint 100 Transportation Charges 101 Erection Charges Complete In All Respect 102 Quantities Are Mentioned Above Are Tentative And Actual Quantity Shall Be Worked Out After Check Survey To Be Carried Out By The Successful Tender And Detailed Engineering And Finalization Of Tower Location Chart.Payment Shall Be Made As Per Approved Bill Of Material / Actual Quantities Measured At Site.

INR 590 /-

INR 16905.0 /-

INR 16.90 Lakhs /-

Name of Work -Tender for Supply of material, design, erection, testing, commissioning for providingprov. SOP to WSS scheme Baba-Kathak in E sec Sakri UESD Kudail Under Electrical Division HPSEBL Baijnath ( SEOP-59/2023-24).

Sl. No.	Item Description
1	Cost of 11KV HT line
2	AAAC 7/3.81 mm (80mm²)
3	Steel Tubular Pole (9 mtr.)
4	Muffs with concerete filling
5	Run Thro" Structures (? Formation): on Single Pole Structures (Adopt Eight (8) No. Run -through Structures per Km)-
6	Cross Arm: [Channel Iron (100x50x6 mm), Length (1270) mm i/c tolerance of 100mm either side x 8 structure
7	Angel Iron (50x50x6 mm), Length (2x750) mm x 8 structure
8	Pole top Bracket
9	11 KV Pin Insulators (Porcelain, 12 KV, 10 KN): 3 No per pole structure
10	Dead End Structures: (Adopt three (3) No. per Km) on Double Pole (Prefer along road side)
11	Belt Set- MS Angle Iron : 50X50X6, Length 1800mm X 2 No.
12	X-Bracing Set - MS Angle Iron: 50x50x6, Length [2125 mmx 2 No.]
13	X-Arm (Horizontal)- MS Channel Iron: 100X50X6, Length 2340mm X 2 No.
14	Discs insulator sets on Dead End structures (comprising 1 No. Disc: (Porcelain, BS, 12 KV, 80 kN) including Dead End Clamps etc.) x (3 No. conductors) x (2 No. sides)
15	11kV Pin Insulators
16	HT Stay / Guy Arrangement
17	Stay set complete in all repect (1 No. / Single Pole, 4 No. / Double Pole Structures)
18	Stay Wire (7/3.15 mm) (6.0 kg Per Stay Set)
19	Earthing
20	HT Earthing set complete
21	GI 8 SWG Earth Wire
22	Cross lacing
23	Eye hook for Earth wire
24	Earth wire clamp
25	MS Channel Iron 75*40*6, Length 1500 mm for earth wire
26	Half Clamp
27	Full Clamp
28	Danger Plate (250x200x1.6 mm)
29	Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)]
30	Barbed Wire
31	Red Oxide
32	Alluminium Paint
33	Erection Charges complete in all respect
34	Transportation charges
35	Cost of 250KVA
36	Distribution Transformer (Ordinary), 11/0.4 kV,250KVA
37	Steel Tubular Poles (9 m, Working Load > 200 kgf/m²)
38	Muffs with concerete filling
39	X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos]
40	MS Angle Iron (50x50x6 mm), Length : 2800 mm X 1 Nos] for LA"s
41	X-Arm: [Channel Iron (75x40x6 mm), Length : 2800 mm X 4 Nos] for supporting DO fuse unit & GO switch
42	Transformer Bed, Belting & Knee Bracing
43	X Arm Channel Iron (100X50x6 mm), Length : 2800 mm x 2 Nos for Transformer Bed
44	X Arm Channel Iron (100X50x6 mm), Length : 460 mm x 2 Nos for supporting main channel of Transformer
45	MS Angle Iron (50X50x6 mm), Length : 2800 mm x 2 Nos
46	MS Angle Iron (35X35x5 mm), Length : 460 mm x 2 Nos
47	MS Angle Iron (50X50x6 mm), Length : 950 mm x 2 Nos for Bed Knee Bracing
48	CT-PT Combined Unit with HT meter
49	CT-PT Combined Unit [PT:11 kV/110 V) ; CT:10-400/5A]
50	Energy meter 3 Phase 4 Wire CT PT Operated HT Meter
51	PVC Multistrand 4 mm² copper wire with F-1 inch GI
52	X-Arm: [Channel Iron (100x50x6 mm), Length : 2800
53	X-Arm: [Channel Iron (75x40x6 mm), Length : 2800 mm
54	X-Arm [Channel Iron (100x50x6 mm), Length : 460 mm
55	MS Angle Iron (50X50x6 mm), Length: 2800 mm x1 Nos
56	Transformer LT Distribution Box and G.O. fixing Assembly
57	MS Angle Iron (50X50x6 mm), Length : 2800 mm x 2 Nos
58	MS Angle Iron (50X50x6 mm), Length : 450 mm x 1 Nos
59	GO Switch Handle supporting (Channel Iron (75x40x6mm), Length 460mm
60	GO AB Switch Unit (11kV, 400A, 25 KA ) tripple Pole O/D type
61	D.O Fuse Unit
62	Surge Arrester, 9 kV Station Class(Porcelain Type)
63	Discs insulator sets (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.)
64	Stay set complete
65	Stay Wire (7/3.15 mm) (7.0 kg Per Stay Set)
66	Pipe Earthing Set
67	LT Distribution panel boxwith MCCB and SFU for 250 KVA
68	Half Clamp (M.S. Flat 50X6 mm)
69	Full Clamps (M.S. Flat 50X6 mm)
70	Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)]
71	Aluminium Thimble
72	Aluminium Thimble
73	Danger Plate
74	Barbed Wire
75	LT Cable (3.5 Core) 185 mm²
76	(a) Aluminium Paint.
77	LT Switched Capacitors 9 KVAr for 250 KVA (rate per KVAr)
78	Transformer Bed( Civil Work) & Chain Link fencing , Angle Iron ,Gate etc for transformer fencing
79	Erection charges complete in all respect.
80	Transportation charges
81	Cost of LT line
82	LT AB Cable 3 X 95+70 mm (double Circuit)
83	Steel Tubular Poles (8 mtr)
84	Muffs with concerete filling
85	Angle Iron (75x75 x6)mm2 length 1.50 mtr + 0.02 mtr
86	Capacitor Bank 36 kVAr
87	Cross Arm: [Channel Iron (100x50x6 mm), Length (1270) mm i/c tolerance of 100mm either side x 8 structure
88	LT Stay Set
89	Stay Wire (7/3.15 mm)
90	Full clamp [2 no. for A.I. 1no. For stay]
91	X-Arm (Horizontal)- MS Channel Iron: 100X50X6, Length 2340mm X 2 No.
92	X-Bracing Set - MS Angle Iron: 50x50x6, Length [2125 mmx 2 No.]
93	Kit Kat I.C.
94	Earthing Set Complete
95	Anchoring Assembly
96	Suspension Assembly
97	Earth Knob
98	Nuts and Bolts of Various Sizes
99	Aluminium Paint
100	Transportation charges
101	Erection charges complete in all respect
102	Quantities are mentioned above are tentative and Actual Quantity shall be worked out after Check Survey to be carried out by the successful Tender and detailed Engineering and finalization of Tower location Chart. Payment shall be made as per Approved Bill of Material/Actual Quantities measured at site.