Tender For Supply Ofmaterial, Design, Erection, Testing, Commissioningfor Sop To Lis Hartara Chobu (E) Section Mahankal Uesd Kudail Under Ed Baijnath( Seop-62/2023-24)., kangra-Himachal Pradesh

Tender For Supply Ofmaterial, Design, Erection, Testing, Commissioningfor Sop To Lis Hartara Chobu ( E ) Section Mahankal Uesd Kudail Under Ed Baijnath ( Seop-62 / 2023-24 ) .-11Kv Ht Line 2 Aaac 7 / 3.15 Mm ( 50Mm² ) 3 Steel Tubular Pole ( 09 Mtr. ) 4 Muffs With Concerete Filling 5 Run Thro Structures ( ? Formation ) : On Single Pole Structures ( Adopt Eight ( 8 ) No. Run -Through Structures Per Km ) - 6 Cross Arm: [ Channel Iron ( 100X50x6 Mm ) , Length ( 1270 ) Mm I / C Tolerance Of 100Mm Either Side X 8 Structure 7 Angel Iron ( 50X50x6 Mm ) , Length ( 2X750 ) Mm X 8 Structure 8 11 Kv Pin Insulators ( Porcelain, 12 Kv, 10 Kn ) : 3 No Per Pole Structure 9 Pole Top Bracket 10 X-Arm 75X40x6 Mm Length 1500 Mm For Earth Wire 11 Dead End Structures: ( Adopt Three ( 3 ) No. Per Km ) On Double Pole ( Prefer Along Road Side ) 12 Belt Set- Ms Angle Iron : 50X50x6, Length 1800Mm X 2 No. 13 X-Bracing Set - Ms Angle Iron: 50X50x6, Length [ 2125 Mmx 2 No. ] 14 X-Arm ( Horizontal ) - Ms Channel Iron: 100X50x6, Length 2340Mm X 2 No. 15 Discs Insulator Sets On Dead End Structures ( Comprising 1 No. Disc: ( Porcelain, Bs, 12 Kv, 80 Kn ) Including Dead End Clamps Etc. ) X ( 3 No. Conductors ) X ( 2 No. Sides ) 16 11Kv Pin Insulators 17 X-Arm 75X40x6 Mm Length 2400 Mm For Earth Wire 18 Ht Stay / Guy Arrangement 19 Stay Set Complete In All Repect ( 1 No. / Single Pole, 4 No. / Double Pole Structures ) 20 Stay Wire ( 7 / 3.15 Mm ) ( 6.0 Kg Per Stay Set ) 21 Earthing 22 Ht Earthing Set Complete 23 Gi 8 Swg Earth Wire 24 Danger Plate ( 250X200x1.6 Mm ) 25 Nuts And Bolts Of Various Sizes ( Galvanised / Coated ) [ Preferably 16 Mm F Or More ( With Flat And Spring Washers ) ] 26 Barbed Wire 27 Aluminium Paint 28 Go Ab Switch Unit ( 11Kv, 400A, 25 Ka ) 29 X-Arm: [ Channel Iron ( 75X40x6 Mm ) , Length: 2800Mm X 4 No. For Supportinggo Switch & Do Fuse Unit 30 Add Erection Charges 31 Add Transportation Charges 32 11 / 0.4Kv 250 Kva Dtr 33 11 / 0.4Kv Distribution Transformer 250Kva 34 S / T Pole 9Mtr.W / L200kg 35 Muff With Concrete Filling 36 X-Arm: [ Channel Iron ( 100X50x6 Mm ) , Length : 2800 Mm X 2 Nos ] Forincomer Line 37 Ms Angle Iron ( 50X50x6 Mm ) , Length: ( 2800 Mm ) X1 Nos For LaS 38 X-Arm: [ Channel Iron ( 75X40x6 Mm ) , Length : ( 2800 Mm X 4 Nos ] Forsupporting Do Fuse Unit & Go Switch 39 Transformer Bed, Belting & Knee Bracing 40 X-Arm: [ Channel Iron ( 100X50x6 Mm ) , Length : 2800 Mm X 2 Nos ] For Transformer Bed 41 X-Arm [ Channel Iron ( 100X50x6 Mm ) , Length : ( 460 Mm ) X 2 Nos Forsupporting Main Channel Of Transformer ] 42 Ms Angle Iron ( 50X50x6 Mm ) , Length : ( 2800 Mm ) X 2 Nos 43 Ms Angle Iron ( 35X35x5 Mm ) , Length : ( 460 ) X 2 Nos 44 Ms Angle Iron ( 50X50x6 Mm ) , Length : ( 950 Mm ) X 2 Nos For Bed Kneebracing 45 Transformer Lt Distribution Box And Go Switch Fixing Assembly 46 Ms Angle Iron ( 50X50x6 Mm ) , Length : ( 2800 Mm ) X 2 Nos 47 Ms Angle Iron ( 50X50x6 Mm ) , Length : ( 450 Mm ) X 1 Nos 48 Go Switch Handle Supporting: [ Channel Iron ( 75X40x6 Mm ) , Length 460Mm 49 Go Ab Switch Unit ( 11Kv, 400A, 25 Ka ) Tripple Pole O / D Type 50 D.O Fuse Unit 51 Surge Arrester, 9 Kv Station Class ( Porcelain Type ) 52 Discs Insulator Sets ( Comprising 1 No. Disc: ^^ ( Porcelain, Bs, 12 Kv, 90Kn ) Including Dead End Clamps Etc. 53 Stay Set Complete 54 Stay Wire ( 7 / 3.15 Mm ) ( 7.0 Kg Per Stay Set ) 55 Pipe Earthing Set 56 Lt Distribution Panel Box With Mccb ( 400A, 25Ka, 4P, 1No ) & Sfu ( 150A, 4No, Rewirable ) 57 Half Clamp ( M.S. Flat 50X6 Mm ) 58 Full Clamps ( M.S. Flat 50X6 Mm ) 59 Nuts And Bolts Of Various Sizes ( Galvanised / Coated ) [ Preferably 16Mm F Or More ( With Flat And Spring Washers ) ] 60 Aluminium Thimble 61 Aluminium Thimble 62 Danger Plate 63 Barbed Wire 64 Lead-Tin Solder ( 60:40 ) 65 Solder Flux 66 Lt Cable ( 3.5 Core ) 400 Mm² 67 Lt Cable ( 3.5 Core ) 300 Mm² 68 Lt Abc 1*120+16+70Mm2 69 Ct Pt Unit 70 Lt Switched Capacitor 9-Kva 71 Energy Meter ( 3-Phase, 4-Wire ) Dlms Compliant 600 A Ct Type For 250Kva Transformer 72 Aluminium Paint. 73 Add Tpt. Charges As Per Cost Data 2022-23 74 Add Erection Charges As Per Cost Data 2022-23 75 Add Erection Chargesfor Lt Cable As Per Cost Data 2022-23 76 3F Lt Line 77 S / T Pole 8 Mtr. W / L 140 Kg 78 Rcc Muff 79 Shackle Insulator 80 D-Iron. 81 Egginsulator 82 Eye Hook Bolt 83 Lt Stay Set 84 Stay Wire 7 / 3.15 Mm ( @ 6.0 Kg Per Stay Set ) 85 Lt Earthing Set Complete 86 G.Iwire 8 Swg For Earthwire ( 1.03 Km ) 87 M.S. Nuts And Bolts ( Off Sizes ) 88 Aluminium Paint 89 Aaac Conductor 50 Mm2 90 Add Tpt. Charges As Per Cost Data 91 Add Erection Charges 92 Civil Work 93 Earth Work In Excavation By Mechanical Means ( Hydraulic Excavator ) / Manual Means In Foundation Trenches Or Drains ( Not Exceeding 1.5 M In Width Or 10 Sqm On Plan ) , Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M. All Kinds Of Soil. 94 Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 1:4:8 ( 1 Cement : 4 Coarse Sand ) : 8 Graded Stone Aggregate 40 Mm Nominal Size ) 95 Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 1:2:4 ( 1 Cement : 2 Coarse Sand ) : 4 Graded Stone Aggregate 20 Mm Nominal Size ) 96 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For: Foundations, Footings, Bases Of Columns, Etc. For Mass Concrete. 97 Structural Steel Work In Single Section, Fixed With Or Without Connecting Plate, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. 98 Providing And Fixing G.I. Chain Link Fabric Fencing Of Required Width In Mesh Size 50X50 Mm Including Strengthening With 2 Mm Dia Wire Or Nuts, Bolts And Washers As Required Complete As Per The Direction Of Engineer-In-Charge. Made Of G.I. Wire Of Dia 4 Mm 99 Providing And Fixing Isi Marked Oxidised M.S. Sliding Door Bolts With Nuts And Screws Etc. Complete : 300X16 Mm 100 Providing And Fixing Isi Marked Oxidised M.S. Handles Conforming To Is:4992 With Necessary Screws Etc. Complete : 125 Mm 101 Quantities Are Mentioned Above Are Tentative And Actual Quantity Shall Be Worked Out After Check Survey To Be Carried Out By The Successful Tender And Detailed Engineering And Finalization Of Tower Location Chart.Payment Shall Be Made As Per Approved Bill Of Material / Actual Quantities Measured At Site.

INR 590 /-

INR 12150.0 /-

INR 12.15 Lakhs /-

Name of Work -Tender for Supply ofmaterial, design, erection, testing, commissioningfor SOP to LIS Hartara Chobu (E) Section Mahankal UESD Kudail Under ED Baijnath( SEOP-62/2023-24).

Sl. No.	Item Description
1	11KV HT line
2	AAAC 7/3.15 mm (50mm²)
3	Steel Tubular Pole (09 mtr.)
4	Muffs with concerete filling
5	Run Thro" Structures (? Formation): on Single Pole Structures (Adopt Eight (8) No. Run -through Structures per Km)-
6	Cross Arm: [Channel Iron (100x50x6 mm), Length (1270) mm i/c tolerance of 100mm either side x 8 structure
7	Angel Iron (50x50x6 mm), Length (2x750) mm x 8 structure
8	11 KV Pin Insulators (Porcelain, 12 KV, 10 KN): 3 No per pole structure
9	Pole top Bracket
10	X-Arm 75x40x6 mm Length 1500 mm for Earth wire
11	Dead End Structures: (Adopt three (3) No. per Km) on Double Pole (Prefer along road side)
12	Belt Set- MS Angle Iron : 50X50X6, Length 1800mm X 2 No.
13	X-Bracing Set - MS Angle Iron: 50x50x6, Length [2125 mmx 2 No.]
14	X-Arm (Horizontal)- MS Channel Iron: 100X50X6, Length 2340mm X 2 No.
15	Discs insulator sets on Dead End structures (comprising 1 No. Disc: (Porcelain, BS, 12 KV, 80 kN) including Dead End Clamps etc.) x (3 No. conductors) x (2 No. sides)
16	11kV Pin Insulators
17	X-Arm 75x40x6 mm Length 2400 mm for Earth wire
18	HT Stay / Guy Arrangement
19	Stay set complete in all repect (1 No. / Single Pole, 4 No. / Double Pole Structures)
20	Stay Wire (7/3.15 mm) (6.0 kg Per Stay Set)
21	Earthing
22	HT Earthing set complete
23	GI 8 SWG Earth Wire
24	Danger Plate (250x200x1.6 mm)
25	Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)]
26	Barbed Wire
27	Aluminium Paint
28	GO AB Switch Unit (11kV, 400A, 25 KA )
29	X-Arm: [Channel Iron (75x40x6 mm), Length: 2800mm x 4 No. for supportingGO Switch & DO Fuse Unit
30	Add erection charges
31	Add transportation charges
32	11/0.4kV 250 KVA DTR
33	11/0.4kV DISTRIBUTION TRANSFORMER 250KVA
34	S/T POLE 9MTR.W/L200KG
35	MUFF with concrete filling
36	X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos] forincomer line
37	MS Angle Iron (50X50x6 mm), Length: (2800 mm) x1 Nos for LA"s
38	X-Arm: [Channel Iron (75x40x6 mm), Length : (2800 mm X 4 Nos] for supporting DO fuse unit & GO switch
39	Transformer Bed, Belting & Knee Bracing
40	X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos] for Transformer bed
41	X-Arm [Channel Iron (100x50x6 mm), Length : (460 mm) x 2 Nos for supporting Main Channel of Transformer]
42	MS Angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos
43	MS Angle Iron (35X35x5 mm), Length : (460 ) x 2 Nos
44	MS Angle Iron (50X50x6 mm), Length : (950 mm) x 2 Nos for Bed Knee Bracing
45	Transformer LT Distribution Box and GO Switch fixing Assembly
46	MS Angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos
47	MS Angle Iron (50X50x6 mm), Length : (450 mm) x 1 Nos
48	GO Switch Handle Supporting: [Channel Iron (75x40x6 mm), Length 460mm
49	GO AB Switch Unit (11kV, 400A, 25 KA ) Tripple pole O/D type
50	D.O Fuse Unit
51	Surge Arrester, 9 kV Station Class (Porcelain Type)
52	Discs insulator sets (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90KN)including Dead End Clamps etc.
53	Stay set complete
54	Stay Wire (7/3.15 mm) (7.0 kg Per Stay Set)
55	Pipe Earthing Set
56	LT Distribution Panel Box With MCCB(400A, 25KA,4P, 1No) & SFU(150A,4No, rewirable)
57	Half Clamp (M.S. Flat 50X6 mm)
58	Full Clamps (M.S. Flat 50X6 mm)
59	Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16mm F or more (with flat and spring washers)]
60	Aluminium Thimble
61	Aluminium Thimble
62	Danger Plate
63	Barbed Wire
64	Lead-Tin solder (60:40)
65	Solder flux
66	LT Cable (3.5 Core) 400 mm²
67	LT Cable (3.5 Core) 300 mm²
68	LT ABC 1*120+16+70mm2
69	CT PT unit
70	LT switched capacitor 9-kva
71	Energy Meter (3-Phase, 4-Wire) DLMS compliant 600 A CT Type for 250KVA Transformer
72	Aluminium Paint.
73	ADD TPT. CHARGES AS PER COST DATA 2022-23
74	ADD ERECTION CHARGES AS PER COST DATA 2022-23
75	ADD ERECTION CHARGESFOR LT Cable AS PER COST DATA 2022-23
76	3F LT line
77	S/T Pole 8 Mtr. W/L 140 kg
78	RCC Muff
79	Shackle Insulator
80	D-Iron.
81	EggInsulator
82	Eye Hook Bolt
83	LT Stay Set
84	Stay Wire 7/3.15 mm ( @ 6.0 kg Per Stay Set)
85	LT Earthing set complete
86	G.IWire 8 SWG for Earthwire (1.03 km)
87	M.S. Nuts and Bolts (Off Sizes)
88	Aluminium Paint
89	AAAC Conductor 50 mm2
90	ADD TPT. CHARGES AS PER COST DATA
91	ADD ERECTION CHARGES
92	Civil Work
93	Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
94	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size)
95	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size)
96	Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns, etc. for mass concrete.
97	Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
98	Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Made of G.I. wire of dia 4 mm
99	Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 300x16 mm
100	Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125 mm
101	Quantities are mentioned above are tentative and Actual Quantity shall be worked out after Check Survey to be carried out by the successful Tender and detailed Engineering and finalization of Tower location Chart. Payment shall be made as per Approved Bill of Material/Actual Quantities measured at site.