Tender For Repairs Renovation Of Office Cum Residence Of Ed Saf Ct 07 At Armapur Esate
Tender Value
19.70 Lakhs
Estimated cost
Bid Submission
05 Mar 2024
0 days left
EMD
39410
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kanpur → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repairs Renovation Of Office Cum Residence Of Ed Saf Ct 07 At Armapur Esate
BOQ
| Sl. No. | Item Description |
| 1 | Civil Work:- |
| 2 | M&L,for Hardcore brokenbricks of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc 15 CM thick, watered and rammed to a true surface all as directed. |
| 3 | M&L for Brickwork with subclass‘B’ bricks designation 75(Kgf/cm2), straight or curved on plan exc 6m mean radius built in 1:4 CM |
| 4 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles |
| 5 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick for flat rough finished work |
| 6 | Reinforced cement concrete Type B-1 (1:2:4) 20mm graded aggregates in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like |
| 7 | Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips of make, Jindal, Tata or equivalent as approved by EIC |
| 8 | M&L for Sand filling under floors or in foundations including watering and consolidation |
| 9 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.And brushing neat cement slurry with 3.0kg of cement per sq. metre |
| 10 | Surface excavation in soft loose soil n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out |
| 11 | M&L for laying 55mm Cement concrete type B-1,1:2:4 (20mm graded aggregate) |
| 12 | M&L for laying screed bed or bedding layer of 1:4 cement mortar 25 mm thick for laying floor finishes |
| 13 | M&L for Rendering 15mm thick plaster on fair faces of brick work or concrete surfaces using 1:4 CM |
| 14 | M&L for neeru finish to plastering as specified |
| 15 | S&F of Fe-410-W(Gde-E-250)quality-B Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete |
| 16 | S & F Plain color PVC sheet 2 mm thick , Sample for quality and shade should be provided to EIC for approval |
| 17 | S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm |
| 18 | S&F of sink mixture with cast spout of make johnson Ruby model no. T2976C or equivalent as approved by EIC |
| 19 | S&F of 03 in 01wall mixture with bend pipe for bathrooms of make Johnson Ruby model no. T2923Cor equivalent as approved by EIC |
| 20 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises |
| 21 | S/F Non skid ceramic coloured tiles 7 to 8mm thick (square /rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm in floors etc. set & jointed in neat cementslurry and pointed incoloured cement and joint free. Make: Johnson/ Kajaria or equivalent as approved by EIC. |
| 22 | M/L Glazed coloured ceramic digital tiles in vertical surface 350x250x7/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement. Make: Johnson/ Kajaria or equivalent as approved by EIC. |
| 23 | S&Ftwo way bib cock cast copper alloy fancy type chromium plated .Make :Johnson Ruby , Model: T2908C or equivalent as approved by EIC. |
| 24 | S/F vitreous china table top wash basin, includingwaste pipe and all fittings and fastenings. Make Hindware, Model: Magna (10079) or equivalent make and model as approved by EIC. |
| 25 | S&F Paper holderMake: Matrix, Model: Boxeror equivalent make and model as approved by EIC. |
| 26 | S&F bathroom set (Towel rail, towel rod, towel ring, soap dish & hook) chromium plated. Make: Matrix , Model : Oscar or equivalentmake and model as approved by EIC. |
| 27 | S/F of bevelled edge mirror of selected quality glass, fancy type. |
| 28 | S&F Vitreous China commode (one piece closet) with cistern pedestal patternincludingseat coverwith all fittings. Make: Hindware, Model: Waveor equivalent make and model as directed by EIC . |
| 29 | S&F health faucet chromium plated. Make : Hindware, Model No F-160013 or equivalent make and model as approved by EIC. |
| 30 | PVC (SWR) 110 MM bore pipe single socketed with rubber ring joints fixed to wall, floor etc. Make- Supreme/Prince/Finolex or equivalent as approved by EIC. |
| 31 | S/F PVC (SWR) bends any radius of 110 mm.Make: Supreme/Jindal as directed by EIC. Make- Supreme/Prince/Finolex or equivalent as approved by EIC. |
| 32 | S/F PVC (SWR) pipe single socketed in any length with rubber ring joint laid in trenches or in floor of 75mm dia. Make- Supreme/Prince/Finolex or equivalent as approved by EIC. |
| 33 | S/F 110 mm dia PVC (SWR) ‘T’ single junction. Make- Supreme/Prince/Finolex or equivalent as approved by EIC. |
| 34 | Taking up or down 15mm dia steel tubing and connections, including cleaning for refixing or removal to store |
| 35 | Cutting chases for concealed water tubing etc., and making good, cutting not exc 10 cm girth |
| 36 | Supplying and laying of SDR 11 CPVC pipes outer dia 16mmfittings on walls / ceiling or laying in floors complete all as specified of make, Prince, supreme, Finolex or equivalent as approved by EIC |
| 37 | S&F, stop valves, fancy type, chromium plated cast copper alloy, screwed down, high pressure, screwed both ends for 15mm bore dia of iron pipe or for unions and fixed as approved by EIC |
| 38 | S&F of Bib taps chrome plated make Johnson Ruby model T2905C or equivalent as approved by EIC |
| 39 | S&Fixed in repair brass chromium plated shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union of make johnson, Parryware or equivalent as approved by EIC |
| 40 | S&F of washbasin mixture of Make johnson Ruby model no. T2917C or equivalent as approved by EIC |
| 41 | S&F for vitreous china wash basins,white flat back,size 580 X 450 mm complete including brackets & accessories as one 15 mm dia.PVC piller tap, 450 mm long 15 mm dia.PVC connection,15 mm dia PVC angle stop valve,32 mm dia CP waste fitting of make , Johnson, Hindware or equivalent as approved by EIC |
| 42 | S&F ofFe 410 -W (Gde- E- 250) quality A Rolled sections as in mainand cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates |
| 43 | Cutting holes into or through brick walls built in cement or lime mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required N exc 150 sqcm |
| 44 | S&F of rolled mild steel channel, angle, or tee sections, fixed independently, without connecting plates, etc. of Fe-410-W(Gde-E-250)quality-B of make Tata, Jindal or equivalent as approved by EIC |
| 45 | M&L for Brickwork with subclass ‘B’ bricks, od designation 75 Kgf/cm2 straight or curved on plan to any radius in half brick thick walls built in 1:4 CM |
| 46 | S&F of harrison rails, mild steel, chromium platedwith fixing brackets, stops, rollers etc. |
| 47 | M&L for taking down shutters of any description exc 1sq. m and n exc 02 sqmeach and removal to store or as directed |
| 48 | S&F of 35mm thick 1st class hard wood Glazed and skeleton shutters, prepared to receive glass etc, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR PartI, Section 8, clause 8.24 (a) Design as approved by EIC |
| 49 | S&F of Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples. Test certificate must be provided from NABL accrediated Lab |
| 50 | S&F of 100mm Butt hinges, heavy weight, cold rolled mild steel, and fixed |
| 51 | S&F of 75mm Butt hinges, heavy weight, cold rolled mild steel, and fixed |
| 52 | S&F of 100mm Brass handles, cast type, polished bright |
| 53 | S&F of 75mm Brass handles, cast type, polished bright |
| 54 | S&F of 100mm Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed |
| 55 | S&F of 75mm Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed |
| 56 | S&F of 250mm brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed |
| 57 | S&F of Sheet glass, 04mm thick ordinary quality and glazing with oil putty or as per requirement in square n exc 0.5 sq. m in each pane |
| 58 | M &L for preparing old surfaces of walls and applying two coats of colour washing |
| 59 | M&L for preparing old surfaces of walls and applying two coats of cement paint |
| 60 | Preparation of old painted surfaces and applying two coat of exterioremulsion paint on wall surfaces as approved over one coat of primer. Make: Asian (Apex Ultima)/ Berger (Weather coat all guard) or quivalent as approved by EIC. |
| 61 | Preparation of old painted steel surfaces and applying two coats of synthetic enamel paint. Make: ASIAN (Apcolite) /BERGER (Luxul High Gloss) or quivalent as approved by EIC. |
| 62 | Preparation of old painted wooden surfaces and applying two coats of synthetic enamel paint. Make: ASIAN (Apcolite) /BERGER (Luxul High Gloss) or quivalent as approved by EIC. |
| 63 | Applying 3mm thick wall care putty on wall surfaces with making completesmooth surface.Make:Birla /J.K.Wall Putty as directed by EIC or quivalent as approved by EIC. |
| 64 | Preparation of old painted surfaces and two coat of 1stquality premium Acrylic emulsion painton Wall and ceilingsurfaces over one coat of primer. Make: Asian (Tractor Acrylic emulsion)/ Berger (Silk Luxury emulsion) as directed by EIC or quivalent as approved by EIC. |
| 65 | M&L for treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors |
| 66 | M&L for anti termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same |
| 67 | M&L for anti termite treatmentalong the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron. |
| 68 | Dismantling Plain or corrugated asbestos cement sheeting,any thickness, including Nainital or similar pattern roof coverings |
| 69 | S&F ofpre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including cutting chasing and filling with mortar 1:3 CM |
| 70 | S&F ofpre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 71 | S&F for powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed. |
| 72 | S&F of 04mm thick aluminum composite panels to any framework with EPDM rubber neoprene packing (Make:- Alstrong, Alstone, Eurobond or equivalent). |
| 73 | S/F 20mm thick granite work in cooking platform fixing with 1:4 cement plaster including pigment. |
| 74 | Electrical Work:- |
| 75 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC). |
| 76 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm. |
| 77 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers. |
| 78 | S&F for Modular Socket 6A/16A - 2/3 pin combined 2 module,ISI marked,Make : HAVELLS/ANCHOR/PHILIPS or equivalent. |
| 79 | Modular switch 1 way 16A, 1 module |
| 80 | Socket 6A/16A - 2/3 pin combined 2 module |
| 81 | Modular switch 1 way 6A, 1 module |
| 82 | Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 16 sq. mm nominal cross section in service connections(4 core cable) |
| 83 | Cable with copper conductor 4 sq. mm PVC round sheathed (flexible) industrial cable for a.c. |
| 84 | Cable with copper conductor 1.5 sq. mm PVC round sheathed (flexible) industrial cable for inverter. |
| 85 | Supply and fixing post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete |
| 86 | Buzzer, Ding Dong AC. 230 volts, single pole |
| 87 | One bell/ buzzer point controlled by one push button on the same board with other switches or independent with cables1.5 sq.mm. size |
| 88 | Supply and fixing 240V, 10 KA \"B\" curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning |
| 89 | Brick walls Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting notexc 10 cm girth. |
| 90 | Double pole and neutral enclosure with a two pin and earth plug and socket complete with one Single pole MCB 20A for Air Conditioner. |
| 91 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators sockets etc. to be measured separately), removing materials to store for keeping in safe custody for reuse at site and making gooddisturbed surfaces of walls, floors, etc. |
| 92 | Taking down carefully by unscrewing from boards/ outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc. for reuse at site or carrying to the store. |
| 93 | M & L for ceiling rose pvc/policarbonate isolated body. ISI Mark Make Anchor/havells or equivalent. |
| 94 | Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store |
| 95 | Tubes, \"medium grade\" galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors 100 mm |
| 96 | Tubes, \"medium grade\" galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors 50 mm. |
| 97 | Cinetico Cargar 15W Led Bulbwith Battery-Is:16102, (Warranty for free replacement 1 year) or equivalent. |
AI Tender Summary
Tender Timeline
Feb 13, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedMar 05, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 08, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender