Department Of Local Bodies has published Tender For Supply And Fixing Decorative Fibre Benches And Playing Instrument In Bapu Nagar Park, Shastri Nagar Park, Indra Colony Park And Shyama Prashad Mukhargi Park, Newai. Submission Date for this Tender is 22-02-2024. RCC Bench Tenders in ajmer Rajasthan. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | WORKS |
| 2 | Providing and fixing of Double Seater Swing Having Safe Play Area -4 mtr. X 2.5 mtr. The Swing required total area about 3 mtr. X 1.5 mtr. And height shall be 2.4 mtr. From ground level top bar of swing is made by 60mm IDGI pipe 16 gauge and 4 nos. of leg support pipe should be made of 60mm IDGI pipe 16 gauge. Top bar shall be attached with 2 nos. of alloy steel coating bearings with GI chain. Seating arrangement of swing is made up of 9mm thick FRP Sheet with proper finishing work. Bearing should be covered by specially design nylon clamp. The pure polyester powder coating done on the pipes to extend the life of equipments. |
| 3 | Providing And Installation of Skipden semidome Climber: - its required Safe Play Area -3.2 mtr. X 3.2 mtr. The Height of the unit shall be about 2 mtr. Length should be 3.0 mtr. And width should be 2.5 mtr.The Structure shall be made by 30mm IDGI pipe for Outer frame in circular shape and 20 MM NB pipefor inner frame. All the sharp edges andcorners are properly grinded to give smooth finishing so that children are not hurt with playing on it. The pure polyester powder coating shall be done on the pipes to extend the life of equipments. |
| 4 | SITC of multi seater see saw for which required safe play area shall be about 4mtr x1.5mtr The height of the equipment shall be about - 0.8mtr.The Multi seater see saw comporises of 4 nos. FRP seats having thickness 4mm with proper finishing and paint finished work. The leaver consists of 25mm IDGI pipe and 80mm IDGI powder coated pipe. The stand for equipment is made of 50mm IDGI pipe with powder coating on complete surface. |
| 5 | Providing and fixing of Children Multiplay system- safe play area -6mtr x 4.5mtr. The Height of equipment shall be about 3 mtr with canopy. The whole unit shall have following parts:- (1) 2 nos. straight slide which have 2.4 mtr length and width 0.6 mtr and made up of FRP with 5 mm thickness over all. including arrangments of 2 nos. stairs of Ms Pipe and flats pipes with paint, welding, molding finishing work. (2) square deck platform should be made by 14 gage crg sheet with FRP non skid lamination and connected leg support pipe should be made by 60mm IDGI pipewith proper fitting. (3) FRP canopy fitted on the platfoem and made up of fiber glass reinforced plastic with 3mm FRP thickness withn 20mm IDGI pipe (4) Small Bridge climber shall be made by 25 mm IDGI Pipe and properly connected with 1 no ofsingle seater swing for 1 child.All the sharp edgs and corner properly grinded to give smooth finished. The powder coating (Oven Baked) Done on the pipes extend the life of equipments. and install by C.C. Base system shall be suitable for age limit of 3 to 12. |
| 6 | Providing and fixing of FRP made wave slide having safe play area about 4.6mtrx 0.9 mtr. The wave slide required total area 3.6 mtr x 0.6 mtr. Platform height shall be 1.8 mtr from ground level connected with leg support 60mm IDGI pipe and ladder should be made by steel frame rectangular square pipe 50mm x 25mm. for safety purpose railing should be made by 25mm IDGI pipe Total FRP slide length shall be 3 mtr. with 5mm thickness overall both side finihing work. All the sharp edges and corners are properly grinded to give smooth finishing.The Pipes and components are powder coated on surfaces. Slide should be made in a single moulded piece having wave shape there shall be no any joint in the slide. FRP components should be paint and finished.complete set as per direction and satisfaction of engineer in charge . |
| 7 | Supply And Fixing Decorative Fibre Benches.which is made by Cast Iron and FRPsheet Plate.Bench length 5 feetback Height 2"5" front height 16" depth 15" and bench leg is made by Cast Iron. Inclunding Bench legEarth work and concrete foundation M-15 Grade Inclunding All material and labour charges. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
