Tender For Development Of Sri Gopaljee Temple , Sakhigopal
Tender Value
65.29 Lakhs
Estimated cost
Bid Submission
23 Feb 2024
0 days left
EMD
65290
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
satyabadi → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Development Of Sri Gopaljee Temple , Sakhigopal
BOQ
| Sl. No. | Item Description |
| 1 | Part - A Civil Cost) |
| 2 | Dismantling brick or stone masonry in lime or cement mortar under 3m. height including stacking the useful materials for reuse and removing the debris within 50m. Lead etc. complete. as per direction of Engg.-in.charge. |
| 3 | Dismantling flat & pan tiled roofing (Tiles only) including stacking the useful materials for reuse and removing the debris within 50m. Lead etc. complete. as per direction of Engg.-in.charge. |
| 4 | Dismantling reepers under tiled roof (pan, flat or nuria tiles) after careful removal of nails including stacking the useful materials for reuse and removing the debris within 50m. Lead etc. complete. as per direction of Engg.-in.charge. |
| 5 | Removing old lime or cement plaster from walls/Ceilings including raking out joints 12 mm deep and removing the debris within 50m lead etc. complete. as per direction of Engg.-in.charge. |
| 6 | Dismantling and removing old tiled flooring including removing the base coarse and stacking the useful materials for reuse and removing the debris within 50m lead etc. complete. as per direction of Engg.-in.charge. |
| 7 | Dismantling and removing old tiled cladding from walls including racking out joints 12mm deep stacking the useful materials for reuse and removing the debris within 50m lead etc. complete. as per direction of Engg.-in.charge. |
| 8 | Dismantling and removing 2.5 cm thick grading concrete from roof slab cleaning the surface lowering and removing the debris within 50m lead etc. complete. as per direction of Engg.-in.charge. |
| 9 | Scraping old paint with scrapers. sand papermg and I washing with soap water or soda including scaffolding charges above 5M high and upto 8M heightetc. complete. as per direction of Engg.-in.charge. |
| 10 | Scraping old paint with scrapers. sand papermg and I washing with soap water or soda including scaffolding charges above 5M high and upto 8M heightetc. complete. as per direction of Engg.-in.charge. |
| 11 | Earth work by mechanical means borrowed from out side within 5km initial lead and 1.5m initial lift including levelling and dressing the bed and sides depositing muck within initial lead and lift etc. complete as per direction of Engg-in-Charge . |
| 12 | Foundation excavation in hard soil including levelling and dressing the bed and sides depositing muck within initial lead and lift etc. complete as per direction of Engg-in-Charge . |
| 13 | Filling foundation and plinth with sand and well watered and rammed including cost, conveyance and royalty etc complete asper direction of Engg.-in-Charge. |
| 14 | Cement concrete (1:3:6)with 40mm size CBHG metal including cost, conveyance and royalty etc. completeas per direction of Engg.-in-Charge. |
| 15 | Cement Concrete (1:2:4) with 12 mm size broken hard granite chips for R.C.C. works including hoisting and laying etc. complete as per direction of Engg-in-Charge . |
| 16 | Rigid and smooth centering and shuttering for R.C.C. works including false works and dismantaling then after casting including cost of materials etc. complete as per direction of Engg-in-Charge . |
| 17 | Supplying and fixing of 60mm thick cement concrete interlocking paver block of M-30 grade of approved make, design, colour and size made by Block making machine with proper compaction laid in required pattern etc. complete in all respect conforming to IRC SP - 63:2018etc. complete as per direction of Engg-in-Charge . |
| 18 | Supplying and fixing of Pre cast kerb stone of size 300mm x 300mm x 150mm of M-30 grade of approved make, design, colour and size made by Block making machine with proper compaction fixed in required pattern etc. complete in all respect confonning to IS 5758: 1984. etc. complete as per direction of Engg-in-Charge . |
| 19 | Fly Ash Brick masonry in c.m. 1:6 in F & Pincluding cost,conveyance and royalty of materials curing etc. complete. as per the direction of the Engineer-in-charge. |
| 20 | Ist class Fly Ash brick masonry workin superstructure thoroughly soaked in water, withcement mortar (1:6) including scaffoldings ,racking out joints, curing etc complete as per specification/drawing and as per the direction of the Engineer-in-charge. |
| 21 | Ground Floor Floor |
| 22 | R.C.C. work M25 grade using 20mm.and down grade HBG crusher broken chips including hoisting,laying, cost,conveyance and royality of materials curing including centering and shuttering etc. complete as per direction of Engg-in-Charge . |
| 23 | Column Base |
| 24 | Ground Floor |
| 25 | Plinth Beam / Tie Beam |
| 26 | Ground Floor |
| 27 | Beam & Column |
| 28 | Ground Floor |
| 29 | First Floor |
| 30 | Second Floor |
| 31 | 65mm avg. Chajja |
| 32 | Ground Floor |
| 33 | Roof Slab |
| 34 | Ground Floor |
| 35 | Second Floor |
| 36 | dome slab at 9.00mt ht |
| 37 | Lintel |
| 38 | Ground Floor |
| 39 | Cylindrical wall |
| 40 | at 9mt ht |
| 41 | Staircase |
| 42 | First Floor |
| 43 | Second Floor |
| 44 | Supplying, fitting and placing uncoated HYSD bar reinforcement complete in proper position including cost of binding wire 18 to 20 gauge as per direction of Engg.-in-Charge. |
| 45 | Ground Floor |
| 46 | First Floor |
| 47 | Second Floor |
| 48 | 12mm cement plaster in cement mortar (1:6)including necessary scaffolding curing etc. as per direction of Engg.-in-Charge. |
| 49 | Ground Floor |
| 50 | 16mm thick cement plaster in cement mortar (1:6) including necessary scaffolding curing etc. as per direction of Engg.-in-Charge. |
| 51 | Ground Floor |
| 52 | 6mm.thick cement plaster with C.M(1:4) to RCC surface including closed deep chipping and slury treatment etc. complete as per direction of Engg.-in-Charge. |
| 53 | Ground Floor |
| 54 | First Floor |
| 55 | Second Floor |
| 56 | Fixing Dholpuri Stone Tilesin floors,treads or steps and landings on 25 mm thick CM (1:1) jointed with neat cement slurry mixed with pigments to match the shades includind cost for rubbing, polishing & cost of marbel tiles etc. completeas per direction of Engg-in-Charge . |
| 57 | Ground Floor |
| 58 | Fixing colour Vitrifiedtiles in floors (Printed Series)of size 600mm x600 mm of approved make conforming IS:13755 laid on 20 mm thick cement mortar (1:4)and filling joints with white cement of approved qualityincluding cost of all materials, labour T&P etc rrequired for the work all completeas per direction of Engineer-in-charge. |
| 59 | Ground Floor |
| 60 | Fixing Vitrifiedtiles in dados (Printed Series)skirting and risers of stepson 12 mm thick cement plaster(1:3) jointed with neat cement slurry mixed with pigments to matche shade of the tiles including rubbing and polishing completeasper direction of Engineer-in-charge. |
| 61 | Ground Floor |
| 62 | Fixing Ceramic Glazed wall tiles in dados skirting and risers of stepson 12 mm thick cement plaster(1:3) jointed with neat cement slurry mixed with pigments to matche shade of the tiles including rubbing and polishing completeasper direction of Engineer-in-charge. |
| 63 | Ground Floor |
| 64 | Fixing Floor tiles in floors,treads or steps and landings on 25 mm thick CM (1:1) jointed with neat cement slurry mixed with pigments to match the shades includind cost for rubbing, polishing & cost of marbel tiles etc. completeas per direction of Engg-in-Charge . |
| 65 | Ground Floor |
| 66 | Cement washing one coats with cost of all labour & materials etc. complete as per direction of Engg-in-Charge . |
| 67 | Ground Floor |
| 68 | Wall Priming onecoats on new work with wall water bound primer ofapproved shadeas per direction of Engg-in-Charge . |
| 69 | Ground Floor |
| 70 | First Floor |
| 71 | Second Floor |
| 72 | Wall painting two coats on new work with Plastic Emulsion Paint ofapproved shade etc. complete as per direction of Engg-in-Charge . |
| 73 | Ground Floor |
| 74 | Finishing wall surface of walls with Acrylic wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T & P etc. complete as per direction of Engg-in-Charge . |
| 75 | Ground Floor |
| 76 | Wall painting two coats on new work with Weather coat paint ofapproved shade as per direction of Engg.-in-Charge. |
| 77 | Ground Floor |
| 78 | First Floor |
| 79 | Second Floor |
| 80 | Supplying ,fitting and fixing of MSsteel shutter with frame with MS angle frame of 35x35x6mmand shutter section of 30x30x5mm MS angle with welding of 25x6mmflat and welding of 16 gauge CR sheet witharrangement of clamp, fitting of 3 nos of 4\" hinges and 300mm x16 mm MS aldrop with 8\" Tower bolt including cost, conveyance, andtaxes of all materials, labour , T&P etc required for complete in all respect as per direction of Engg-in-Charge . |
| 81 | All Floors |
| 82 | Eamel Painting two coats with enamel paint over one coat of primer of approved quality etc. complete as per direction of Engg-in-Charge . |
| 83 | Ground Floor |
| 84 | 4cm.thick grading concrete (1:2:4) on roof slab using 12mm.& down grade size CBHG chips including cost,conveyance and royalty of materials curing etc.complete as per direction of Engg-in-Charge . |
| 85 | Ground Floor |
| 86 | Supplying,fitting & fixing of stainless steel of 304 grade in Hand Railing using 50mm. Dia of 2mm. thick circular pipe with Balustrade of size 32mm.x32mm.x2mm. @ 0.90m. C/C and stainless square pipe bracing of size 32mm.x32mm.x2mm. In 3 rows in stair case as per approved design and specification,buffing,polishing etc. with cost, conveyance, taxes of all materials labour T & P etc. required for the completion in all respect etc. completeas per direction of Engg-in-Charge . |
| 87 | over lion idol |
| 88 | Intze Water Tank |
| 89 | Fixing industrial Chequred tiles in floors,treads or steps and landings on 25 mm thick CM (1:1) jointed with neat cement slurry mixed with pigments to match the shades includind cost for rubbing, polishing & cost oftiles etc. completeas per direction of Engg-in-Charge . |
| 90 | Ground Floor |
| 91 | Supply and Erection of single steel tubular pole\n of 6 mt long approx wt52.25 kg. IS CHS 80 mm OD 4mm th TATA with sole plate & cap etc in CC foundationand GI earth bolt after making drilled holes etc on pole & carriage of poleincluding filling up the excavated earth pit with shifted soil and ramming properly etc. complete as per direction of Engg-in-Charge . |
| 92 | Supply & fitting single arm header assembly 300mm long 80mm dia GI pipe welded with 1.5mt long 40mm dia GI pipe and MS angle iron frame of 35x35x5mm for photovoltic panel with nece. Nuts and bolts and painting including supply and drawing necessary PVC insulated copper wire as per approved design & drawing of theetc. complete as per direction of Engg-in-Charge . |
| 93 | Earthing with 50mm dia Galvanised iron pipe 3.64mm thick x3mts long and 1xaSWG GI WIRE (1mts long ) 13mmx80mm dia GI Bolts double nuts,double washers incl.S&F 15mm dia GI pipe protection as to GS by TATA Medium GI pipe for soft soiletc. complete as per direction of Engg-in-Charge . |
| 94 | Supply and Installation of75WSPV MODULE Indigenously manufactured PV module should be used.The PV module should have crystalling silicon solar cells and must have a certificate of testing conforming to IEC 61215 Editing II/bis 14286 from an NABL or IECQ accredited laboratory. |
| 95 | Supply and fixing 18W Integrated solar streetlight suitable for perfect solar system solution for remote & off grid locations. Housing in aluminium alloy body which makes it water & rust proof with IP65.Enclosed inside the unit multi cell LEP Technology BATTERY Lithium Ion/Oxide 24Ah+1%,12.8V+0.4V,Max continuous discharge current (w/o PCM)upto42A,should conform to the latest BIS/International standards which is charged by a highly effiecient mono-crystalline solar panel.The LED Iuminary delivers close to 120 lumens per watt and is made from the finest LEDs from Bridgelux/Oshram/Philips confirmed to BIS specification.The light must have dust to drawn system to auto control the device.The Streetlight is a plug & play unit and can be very easily mounted on walls or poles via the extensions provided with the product itself.A manual ON/OFF switch has also been provided so that the light can be awitched off when not in use for a long timeetc. complete as per direction of Engg-in-Charge . |
| 96 | 15cm thick cement concrete (1:3:6) drain 75cm wide and 30cm depth including 12MM cement plastering ( 1 :3) finished smooth etc. complete as per direction of Engg-in-Charge . |
| 97 | 25cm. x 23cm concrete drain with cement concrete (l :3:6) and cement plaster ( I :3) finished smooth with I 0cm thick concrete over hard base etc. complete as per direction of Engg-in-Charge . |
| 98 | 12mm. thick cementplaster in c.m. 1:4 over brick masonry with neat cement punningincluding cost conveyance and royality of materials curing etc. complete as per direction of Engg-in-Charge . |
| 99 | Ground Floor |
| 100 | Part - B( Electrification) |
| 101 | Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp, 250 V modular type switch ISI marked and ceiling rose ISI marked mounted on MS box having front modular cover of suitable size , MS modular box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex / L&T / Anchor / Havels / V Guard ) |
| 102 | Group-A |
| 103 | Group-B |
| 104 | Group-C |
| 105 | Recessed wiring to submain in 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire Finolex/L&T/Anchor/Havels/V Guard) |
| 106 | Recessed wiring to Submain with 2 x 2.5 sq. mm. FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit along with with 1 x 1.5sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as tequred as per direction of Engineer in Charge. ( Make of wire Finolex / L&T / Anchor / Havels / V Guard ) |
| 107 | Recessed wiring to Supply and fixing of 01 no.sof 3pin 5/6 amp modular socket and S.P. 5/6 amp one way modular switch, 1 no. of 5 pin 15/16 socket out let and S.P. 15/16 A one way modular switch on Modular G.I. Box with Modular Base and cover. .(Make of wire Finolex/L&T/Anchor/Havels/V Guard) |
| 108 | S/F SP MCB DISTRIBUTION BOARD ISI MARKEDSupply and fixing of single pole MCB with sheet steel enclosure, distribution board, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, phosphate and powder painted including earthing etc. as required ( But with out MCB/ RCCB/ ISOLATOR)8 WAY, DOUBLE DOOR |
| 109 | Supply and fixing of 5 amp to 32 amp rating 240 V \"B\" series miniature circuit breaker suitable for lighting and other loads of the following poles in the existing MCB DB ISI marked complete with connections testing and commissioning etc. as required. |
| 110 | Supply, Installation, Testing, and Commissioning of 63 Amp TPN Main switches with Porcelain Base kitkat fuse of following capacity (IS 13940 Part 3/1993 ) on existing surface / wall mountnting and complete with HRC Fuse links, interconnections, earthing, etc. as required as per direction of Engineer in Charge.Make- EIMENS/HPL/ANCHOR/ L&T/HAVELS/C & S/ RK |
| 111 | Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc (But wihout charcoal and salt) as required. as per direction of Engineer in Charge. |
| 112 | Salt / charcoal for plate earth electrodeExtra for using salt and charcoal for G.I or copper pipe earth elctrrode as required as per direction of Engineer in Charge. |
| 113 | S/F of 48\" Ceiling fan Alluminium Body, Copper winding, High speed ceiling fan (Make-Crompton Model- as required as per direction of Engineer in Charge. |
| 114 | S/F of 1x18 Watt LED T-5 fitting(Make-Crompton/Philips/Havells/Bajaj) as required as per direction of Engineer in Charge. |
| 115 | S/F of 20 Watt LED Square surface mount fitting (Make-Havells/Philips/C&S/Crompton) as required as per direction of Engineer in Charge. |
| 116 | Providing and fixing M.V danger board of 250 mm x 200 mm made mild steel at least 2 mm thick and vitreous enameled white on both sides and with inscription in single red colours on front side as required. as per direction of Engineer in Charge. |
| 117 | S/L of 8 SWG copper wire in groundSupplying and laying 8 SWG copper wires ISI marked at 0.5 meter below grond level for conductor earth electrode including soldering etc. as required as per direction of Engineer in Charge. |
| 118 | LALYING OF CABLE ON SURFACEMV cable laying up to 25 sq.mm on surfaceLaying and fixing of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KVgrade of size not exceeding 25 sq.mm on surface as required as per direction of Engineer in Charge. |
| 119 | Supply of PVC Aluminium armored cables ISI marked. (Make- Glowstar/ Polycab/Nicco/KEI on surface as required as per direction of Engineer in Charge. 10 sq mm 4 core PVC Armoured cables ISI marked |
| 120 | Installation, testing and commissioning of exhaust fan up to 450 mm sweep in the existing opening, including making the hole to suit the size of the above fan, making good the damage complete,connection, etc as required |
| 121 | PART-C ( PHD & Sanitation ) |
| 122 | Cutting holes through existing brick work including making good the same in cement mortar (1:4) for taking GI/PVC pipes and fittings etc all complete as per Engg.-in- charge.250mm wall |
| 123 | All Floor |
| 124 | Cutting holes in R.C.C floors and roos upto 19cm thick for passing G.I/P.V.C pipes and fitting etc. and prepairing the holes after insertion of pipe etc. with cement concrete 1:2:4 including finishing complete so as to make it leak proof as per Engg.-in- charge. |
| 125 | All Floor |
| 126 | Cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per specification etc complete as per Engg.-in- charge. |
| 127 | All Floor |
| 128 | Providing and fixing on wall face unplasticised Rigid PVC soil, waste and rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes complete as per direction of Engineer-in-Charge |
| 129 | 75mm OD P.V.C. SWR S/S Pipe (ISI type-A) |
| 130 | All Floor |
| 131 | 90mm OD P.V.C. SWR S/S Pipe (ISI type-A)(for rain water) |
| 132 | All Floor |
| 133 | 110mm OD P.V.C. SWR S/S Pipe (ISI type-A) |
| 134 | All Floor |
| 135 | Laying in trenches unplasticised PVC pipes IS:4985-2000 and specials of the following outside diameter for all classes including jointing with supply of approved solvent cement by heat application method including testing as per specification complete. (Earth work in trenches to be measured and paid for separately) |
| 136 | 125mmdia rigid UPVC pipe Class -3 (0.60Mpa) |
| 137 | All Floor |
| 138 | 160mmdia rigid UPVC pipe Class -3 (0.60Mpa) |
| 139 | All Floor |
| 140 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge |
| 141 | 20mm dia pipe |
| 142 | All Floor |
| 143 | 25mm dia pipe |
| 144 | All Floor |
| 145 | 40mm dia pipe |
| 146 | All Floor |
| 147 | 50mm dia pipe |
| 148 | All Floor |
| 149 | Providing and fixing on wall face unplasticised-PVC moulded fittings / accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansios etc complete as per direction of Engineer-in-Charge |
| 150 | PVC SWR coupler |
| 151 | 75 mm dia PVC SWR coupler |
| 152 | All Floor |
| 153 | 90 mm dia PVC SWR coupler |
| 154 | All Floor |
| 155 | 110 mm dia PVC SWR coupler |
| 156 | All Floor |
| 157 | Single tee with door |
| 158 | 75 x 75 x 75mm dia PVC SWR Tee |
| 159 | All Floor |
| 160 | 90 x 90 x 90mm dia PVC SWR Tee |
| 161 | All Floor |
| 162 | 110 x 110 x 110mm dia PVC SWR Tee |
| 163 | All Floor |
| 164 | SWR Plain Bend 87.5° |
| 165 | 75mm diaP.V.C. SWR plain bend 87.5 |
| 166 | All Floor |
| 167 | 90mm diaP.V.C. SWR plain bend 87.5 |
| 168 | All Floor |
| 169 | 110mm diaP.V.C. SWR plain bend 87.5 |
| 170 | All Floor |
| 171 | SWR PlainDoor Bend 87.5° |
| 172 | 75mm diaP.V.C. SWR plain bend 87.5 |
| 173 | All Floor |
| 174 | 90mm diaP.V.C. SWR plain bend 87.5 |
| 175 | All Floor |
| 176 | 110mm diaP.V.C. SWR plain bend 87.5 |
| 177 | All Floor |
| 178 | FixingWash Basinwith hole for pillar type with cast iron or M S bracket painted white including cutting holes in the walls and making good the damagesetc. complete as per direction of Engg. in charge.Porcelain 22\"x 16\"(550x400) W.H.B |
| 179 | All Floor |
| 180 | Fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin complete as per specificationetc. complete as per direction of Engg. in charge. |
| 181 | All Floor |
| 182 | Fixing of Brass Screw-down Bib Cocks (Taps) polished bright conforming to IS:781-1995 of the following nominal sizes as per specificationetc. complete as per direction of Engg. in charge. |
| 183 | 15mm Short Body Bib Cock |
| 184 | All Floor |
| 185 | 15mm Long Body Bib Cock |
| 186 | All Floor |
| 187 | Fixing of Brass Screw-down Angle/Counseales stop cock Cocks polished bright conforming to IS:781-1995 of the following nominal sizes as per specificationetc. complete as per direction of Engg. in charge. |
| 188 | 15mm dia CP Brass Angle Stop Cock |
| 189 | All Floor |
| 190 | 20mm dia CP Brass Concealed Stop Cock |
| 191 | All Floor |
| 192 | Fixing of Brass 15mm dia CP flange of the following nominal sizes as per specificationetc. complete as per direction of Engg. in charge. |
| 193 | 15mm dia CP flange |
| 194 | All Floor |
| 195 | Fixing 600mm x 450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with chromium plated brass screws and washers complete as per specificationetc. complete as per direction of Engg. in charge. |
| 196 | 600mm x 450mm bevelled edge mirror |
| 197 | All Floor |
| 198 | Fixing standard sized glass-shelf with Chromium Plated brass brackets and guard rails complete, fixed to woden plugs with Chromium Plated brass screws as per specification complete as per direction of Engg. in charge. |
| 199 | C.P. glass self with glass |
| 200 | All Floor |
| 201 | Fixing standard sized Chromium Plated brass towel rail complete with Chromium Plated brass brackets fixed to wooden plugs with Chromium Plated brass screws, complete as per specification. complete as per direction of Engg. in charge. |
| 202 | C.P. towel rail.(600x20)mm |
| 203 | All Floor |
| 204 | Fixing (a) Liquid Soap Container – Glass container or Plastic container with Chromium Plated brass lid and brackets fixed to wooden plugs with Chromium Plated brass screws or (b) Chromium Plated brass soap dish complete with Chromium Plated brass brackets fixed to wooden plugs with Chromium Plated brass screws or (c) white glazed tooth brush holder fixed to wooden plugs with Chromium Plated brass screws as per specification complete as per direction of Engg. in charge. |
| 205 | C.P Soap holder/disc. |
| 206 | All Floor |
| 207 | Supply , fitting and fixing of following fixers including all materials and labours etc all complete as per specification complete as per direction of Engg. in charge. |
| 208 | 450x450mm Square Man Hole Cover -16.0 kg |
| 209 | 90mm dia P.V.C. Nahani Trap |
| 210 | 110mm dia PVC SWR Single Y with door |
| 211 | PVC SWR Jalli 110mm dia |
| 212 | 110 mm dia P.V.C. SWR Vent Cowl |
| 213 | UPVC BALL VALVE Sch-80 (Solvent Welded with Metal Ball) |
| 214 | 25mmdia |
| 215 | 40mmdia |
| 216 | 50mmdia |
| 217 | Supply , fitting and fixing of Waste water outlet in cement including cost of gratings etc all complete as per specification complete as per direction of Engg. in charge. |
AI Tender Summary
Tender Timeline
Feb 13, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 23, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 24, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender