|
| 1 | Supplyingandstackinggoodearthatsiteofwork. Note:1)Loading,unloadingandcarriagetobepaidextraasper actuallead. 2)Earth measured in stacks will be reduced by 20% foe payment |
| 2 | Providing, laying and spreading of granular sub-base by providing coarse graded Material (Table 400-2), spreading in uniform layers with motor grader on prepared surface, mixing BY MIX IN PLACE METHOD with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per MoRT&H specification clause - 401 including all material, labour, machinery, lighting, guarding and maintenance of diversion. Grading - III |
| 3 | Dressingofearth workinsurfaceexcavationincludingcuttingand fillingupto30cmdepthincludingdisposalofexcavatedearthupto 50m and lift upto 1.5 m. |
| 4 | Providing and laying lean cement concrete 1:4:8 in Sub- base over a preparedsub-gradewithcoarseandfineaggregateconformingto IS:383,thesizeofcoarseaggregatenotexceeding25mm, aggregatecementrationottoexceed15:1,aggregategradation afterblendingtobeaspertable600-1,cementcontentnottobe lessthan 150 kg/ cum, optimum moisture contentto be determined during trial length construction, concrete strength not to be less than 10Mpaat7days,mixedinconcretemixer,laidmanually, compactedwithsurfacevibrator,finishingandcuringcompleteas per clause 601, 112 of MoRT&H specificationincluding all material, labour, machinery, lighting, guarding and maintenance of diversion. |
| 5 | Providing and laying un-reinforced, dowel jointed, plain cement concrete mix With Concrete Mixer & vibrator pavement over a prepared sub base with 43 grade cement , coarse and fine aggregate conforming to IS: 383, maximum size of coarse aggregate not exceeding 25 mm, mixed as per approved mix design, laid, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, admixtures (if required) as approved, curing compound, finishing to lines and grades complete as per drawing and as per clause 602, 112 of MoRT&H specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. 9.5.1 PCC M-20 |