Tender For Yearly Tender For Civil Work At Vadgon Nagarpanchyat Vadgaon Maval, Pune-Maharashtra

Tender For Yearly Tender For Civil Work At Vadgon Nagarpanchyat Vadgaon Maval-2 Excavation For Foundation In Earth, Soil Of All Types, Sand, Gravel And Soft Murum, Including Removing The Excavated Material Up To A Distance Of 50 M Beyond The Building Area And Stacking And Spreading As Directed, Dewatering, Preparing The Bed For The Foundation And Necessary Back Filling, Ramming, Watering Including Shoring And Strutting, Dewatering Etc. Complete. ( Lift Upto 1.5 M. ) By Mechanical Means. 3 Excavation For Foundation In Hard Murum Including Removing The Excavated Material Upto A Distance Of 50 Metres Beyond The Building Area And Stacking And Spreading As Directed, Dewatering, Preparing The Bed For The Foundation And Necessary Back Filling, Ramming, Watering Including Shoring And Strutting, Dewatering Etc. Complete. ( Lift From 1.5 To 3.0 M. ) By Manual Means. 4 Removing Lime Or Lean Cement Concrete Including Stacking The Spoils As Directed With All Leads, Lifts Complete. 5 Providing Drytraprubble Stone Soling 15Cm To 20Cm Thick Including Hand Packing And Compacting Complete. 6 Providing Second Class Burnt Brick Masonry With Conventional / I. S. Type Bricks In Cement Mortar 1:6 In Foundations And Plinth Of Inner Walls / In Plinth External Walls Including Bailing Out Water Manually, Striking Joints On Unexposed Faces, Raking Out Joints On Exposed Faces And Watering Complete. 7 Providing Second Class Burnt Brick Masonry With Conventional / I. S. Type Bricks In Cement Mortar 1:6 In Superstructure Including Striking Joints, Raking Out Joints, Watering And Scaffolding Complete. 8 Providing And Laying Cast In Situ / Ready Mix Cement Concrete In M-10 Of Trap / Granite / Quartzite / Gneiss Metal For Foundation And Bedding Including Bailing Out Water, Formwork, Laying / Pumping, Compacting, Roughening Them If Special Finish Is To Be Provided, Finishing If Required And Curing Complete, With Fully Automatic Micro Processor Based Plc With Scada Enabled Reversible Drum Type Mixer / Concrete Batch Mix Plant ( Pan Mixer ) Etc. Complete. With Fine Aggregate ( Crushed Sand V.S.I. Grade ) . 9 Providing Internal Cement Plaster 12 Mm. Thick In Single Coat In Cement Mortar 1:5 Without Neeru Finish To Concrete Or Brick Surfaces, In All Positions Including Scaffolding And Curing Etc. Complete. 10 Providing Fine Cement Finish 1.5 Milimetre Thick Over Green Plaster Surface Including Scaffolding Curing Etc. Complete. 11 Providing And Fixing In Position Tmt Fe -500 Bar Reinforcement Of Various Diameters For R.C.C. Pile Caps, Footings, Foundations, Slabs, Beams Columns, Canopies, Staircase, Newels, Chajjas, Lintels Pardis, Copings, Fins, Arches Etc. As Per Detailed Designs, Drawings And Schedules, Including Cutting, Bending, Hooking The Bars, Binding With Wires Or Tack Welding And Supporting As Required Complete. 12 Conveying Materials Obtained From Road Cutting Including All Lifts, Laying In Layers Of 20 Cm. To 30 Cm. Breaking Clods, Dressing To The Required Lines, Curves, Grades And Section, Watering And Compacting To Not Less Than97% Of Standard Proctor Density For A Lead Of Over 50 M To 300 M. Inclusive From The Site Of Excavation To The Site Of Deposition As Directed. 13 Providing And Fixing Mild Steel Grill Work For Windows, Ventilators, Etc.15 Kg / Sq.M As Per Drawing Including Fixtures, Necessary Welding And Painting With One Coat Of Anticorrosive Paint And Two Coats Of Oil Painting Complete. 14 Providing And Errecting Chain Link Fencing 1.6 Metre Height With Galvanised Iron Chain Link Of Size 50 X 50 Milimetre 8 Guage Thick And Fixed 75 Milimetre Above Ground Level On Verticalmild Steel Angle Of 40X40x6 Milimetre Size Including Excavating Pits For Foundation And Embeded In Cement Concrete Block Of 1:4:8 Mix Of Size 450X450x670 Milimetre At 1.75 Metre Center To Center With Iron Bar 16 Milimetrediameteras Hold Fast Including Welding Link With Angle Frame At 30 Cm. C / C Nuts And Bolts And Horizontal Mild Steel Angles At Top And Bottom Of 25X25x5 Metre Size And Vertical Mild Steel Flat 35 X 5 Metre And 25 X 5 Metre Horizontal Including Cross Support Of 40X40x6 Metre Angles Both Sides At Every Corner Or Bends Embeded In Concrete Blocks Of 1:4:8 Of Size 450X450x670 Milimetre Including 3 Coats Of Oil Painting Etc. Complete. 15 Providing And Laying Concrete Pipe Ofindian Standard Non Pressure Class Of300 Milimetrediameter In Proper Line, Level And Slope Including Necessary Collars, Excavation, Laying, Fixing With Collars In Cement Mortar 1:1 And Refilling The Trench Complete. 16 Providing & Constructing Brick Masonry Inspection Chamber 60 Cm X 45 Cm X 90 Cm Including 1:4:8 Cement Concrete Foundation 1:2:4 Cement Concrete Channels Half Roundglazedstone Ware Pipes, Brick Masonry, Plastering From Inside And Airtight C. I.Cover Of 75 Kg With Lid And Frame Fixed In Cement Concrete Etc. Complete. 17 Providing & Constructing Brick Masonry Inspection Chamber 60 Cm X 45 Cm X 90 Cm Including 1:4:8 Cement Concrete Foundation 1:2:4 Cement Concrete Channels Half Round Glazedstone Warepipes, Brick Masonry, Plastering From Inside And With Frame Fixed In Cement Concrete With R.C.C. Cover Medium Duty 140 Kilogram With Frame Etc. Complete. 18 Providing Hard Murum Side Shoulder Including Supplying Hard Murum At The Road Site, Including Spreading And Compacting For Sidewidth Layers On Each Side With Power Roller Including Artificial Watering Etc Complete. 19 Providing And Fixing Hume Pipe Septic Tank 900 Mmdiameter With Vent Pipe And Cap Including Necessary ( Excluding Excavation And Laying ) . 20 Providing Uncoursed Rubble Masonary Oftrap Stones In Cement Mortar 1:6 In Foundations And Plinth Of Inner Walls / In Plinth Of External Walls Including Bailing Out Water Manually, Striking Joints On Exposed Faces And Watering Complete. 21 Providing Uncoursed Rubble Masonary Oftrapstones In Cement Mortar 1:6 In Superstructure Including Raking Out Joints When Plastering Is To Be Done / Striking Joints When No Plastering Is To Be Done Watering And Scaffolding Complete. 22 Providing And Applying White-Wash In Two Coats On Old / New Plastered Or Masonry Surfaces And Asbestos Cement Sheets Including Scaffolding And Preparing The Surface By Brushing & Brooming Down Complete. 23 Providing And Applying Colour-Wash Of Approved Colour And Shade In Two Coats To New Surface Including Scaffolding, Brushing And Brooming Down ( Excluding Base Coat Of White-Wash ) Etc. Complete. 24 Providing And Applying Washable Powder Distemper Of Approved Colour And Shade To Old & New Surfaces In One Coat Including Scaffolding, Preparing The Surfaces ( Excluding The Priming Coat. ) Complete. 25 Providing & Applying Washable Oil-Bound Distemper Of Approved Colour And Shade To Old & New Surfaces In One Coat Including Scaffolding, Preparing The Surfaces. ( Excluding The Primer Coat ) Complete. 26 Providing And Applying Interior Wall Finish Luster Of Asian / Berger / Nerolac / Dulux Paints Or Equivalent Make On Internal Wall Surface As Detailed Below Scrapping The Surface With Emery Paper And Wipe Clean. Applying Asian / Berger / Nerolac / Duuex Paints Or Equivalent Wall Primer With Brushwith Mineral Turpentine With Brush 8 To 10% And Oil 15 To 20% With Roller And Allowing To Dry For A Period 6 To 8 Hours. Applying Asian / Berger / Nerolac / Dulex Paints Or Equivalent Acrylic Wall Putty With Appropriate Proportion Of Water Allowing To Dry For Period 4 To 6 Hours. Scrapping With Emery Paper 180 And Wipe Clean. Applying Asian / Berger / Nerolac / Dulux Paints Or Equivalent Wall Primer With Brush With Mineral Turpentine 8 To 10% And Oil 15 To 20% With Roller Scrapping Emery Paper 320 And Wipe Clean, Applying Asian / Berger / Nerolac / Dulux Paints Or Equivalent Interior Wall Finish Luster 1St Coat With Brush / Rubber / Spray With Mineral Turpentine 7 To 9% And Oil With Roller 19 To 21% After 8 Hours Of Activity Applying 2Nd Coat Of Asian / Berger / Nerolac / Dulux Paints Or Equivalent Interior Wall Finish Lustre With Mineral Turpentine 7 To 9 % With Brush And Oil With Roller 19 To 21% After Allowing Dry For The Period Of 6 To 8 Hours Activity ( With Prior Approval Of S.E. ) . 27 Providing & Applying Two Coats Of Lead / Zinc Base Oil Paint / Bituminious Paint Of Approved Colour To New Structural Steel Work And Iron Work In Buildings Including Scaffolding If Necessary, Cleaning And Preparing The Surface Etc.Complete. ( Excluding Primer Coat ) . 28 Providing And Applying Two Coats Of Water Proof Cement Paint Of Approved Manufacture And Of Approved Colour To Old Plastered Surfaces Including Scaffolding If Necessary, Cleaning And Preparing The Surface, Watering For Two Days Etc. Complete. 29 Providing And Laying Rough Shahabad Stone Flooring 25 Mm To 30 Mmthick & Of Required Width In Plain / Diamond Pattern On A Bed Of 1:6 C.M. Includingcement Float, Striking Joints, Pointing In Cement Mortar 1:3 Curing And Cleaning Etc.Complete 30 Providing Cement Based Water Proofing Treatment To Terraces ( Indian Water Proofing Or Alike ) With Brick Bats Laid In Required Slope To Drain The Water For Any Span After Cleaning The Base Surface. Applying A Coat Of Cement Slurry Admixed With Approved Water Proofing Compound And Laying The Brick Bats On Bottom Layer In Cement Mortar 1:5 Admixed With Approved Water Proofing Compound Filling Up To Half Depth Of Brick Bats, Curing This Layer For 3 Days, Applying Cement Slurry Over This Layer Joints Of Brick Bats With Cement Mortar1:3 Admixed With Approved Water Proofing Compound And Finally Top Finishing With Average 20 Milimetre Thick Layers Of Same Mortar Added With Jute Fiber At 1 Kilogram Per Bag Including Finishing The Surface Smooth With Cement Slurry Admixed With Approved Water Proofing Compound. Marking Finished Surface With False Squares Of 300 Milimetre X 300 Milimetre Making The Junctions At The Parapet Rounded And Tapered Top For Required Height, With Drip Mould At The Junction Of Plaster And Parapet And Curing And Covering 10 Years Guarantee Against Leakproofness On Court Fee Stamp Paper Of Rs. 500 / - Including Ponding Test Etc. Complete. 31 Providing And Laying Polished Kotah Stone Flooring 25Mm To 30Mm Thick & Of Reqd. Width In Plain / Diamond Pattern On A Bed Of 1:6 Cement Mortar Including Cement Float, Filling Joints With Neat Cement Slurry, Curing, Polishing And Cleaning Complete. 32 Providing And Laying Cement Concrete 50 Mm. Thick With M-15 Cement Concrete Laid To Proper Level And Slope In Alternate Bays Including Compaction Filling Joints, Marking Lines To Give The Appearance Of Tiles Of 30 Cm. X 30 Cm. Or Other Size Laiddiameter Gonally / Square Etc Finishing Smooth ( With Extra Cement ) In Any Colour As Directed And Curing Complete With Crushedsand. 33 Providing And Laying Polished Machine Cut Machine Polished Kotah Stone Slabs 20 To 25 Mm Thick For Treads And Risers Of Steps And Staircases, With Rounded Nosing For The Treads On A Bed Of 1:4 Cement Mortar Including Cement Float, Filling Joints With Neat Cement Slurry, Curing, Polishing And Cleaning Complete. 34 Providing Sills Of Marble Other Than Makrana 20 Mm. To 25 Mm. Thick, On A Bed Of 1:4 Cement Mortar Including Cement Float, Filling Joints With Neat Cement Slurry, Curing, Polishing, Rounding Edges And Cleaning Complete. 35 Providing And Fixing Black Kadappa Stone As Shelves 25 Mm. Thick Machine Polished, Extending The Polish Upto 20 Cm. Width On Lowerside, Rounding Corners, Laying In Position Jointing With Bedding Cement Mortar 1:4 Proportion Curing Etc. Complete. 36 Providing And Laying Ceramic Tiles Having Size 30 Cm. X 30 Cm. Conforming I.S.15622 / 2006 ( Group D Ii-A ) And 7 To 8 Mm. Thick For Flooring In Required Position Laid On A Bed Of 1:4 Cement Mortar Including Cement Float, Filling Joint With White / Colour Cement Slurry Cleaning Curing Etc. Complete. 37 Providing Mirror Polishing To Kota Stone Flooring Including Using All Necessary Stones And Equipments Cleaning, Washingetc. Complete. 38 Providing And Laying Vitrified Mirror / Glossy Finish Tiles For Flooringof Decorative Type Having Size 590 Mm. To 605 Mm. X 590 Mm. To 605 Mm. Of 8 To 10 Mm. Thickness And Confirming To I.S. 15622: 2006 ( Group Bla ) Of Approved Make, Shade And Pattern For Flooring In Required Position Laid On A Bed Of 1:4 Cement Mortar Including Neat Cement Float, Filling Joints, Curing And Clearingetc. Complete. 39 Providing And Fixing Heavy Duty Inter Locking Concrete Coloured Paving Blocks Of 60 Mm. Thickness Of Having A Strength Of 300 Kg / Sq.Cm. Of Approved Quality And Shape On A Bed Of Crushed Sand Of 25 To 30 Mm. Thick Including Skirting Joints And Cleaning Etc. Complete 40 Providing And Fixing Plain Zinc Sheeting Of 0.80 Milimetre Thick ( 22 B.W.G. ) Over The Ridge Hip Or Velley To Galvanised Iron Sheet Roofing Including All Fastening And Bolt Galvanised Iron Screws And Bolts And Lead And Bitumen Washers Complete. ( Weight Of 6.8 Kg Per Square Metre ) . 41 Providing And Fixing 6.00 Mm Thick I.S.I. Mark Asbestos Cement Corrugated Sheet Roofing Including Galvanised Iron J Or L Hook Bolts Galvanised Ironand Bituminous G.I.Washers, Galvanised Iron Clamps, Bolts And Nuts And Scaffolding Complete. 42 Providing And Fixing 6 Mm Thick I.S.I. Mark Asbestos Cement Ridge Capping For Roofing Including Galvanised Iron Hooks, Bolts, Galvanised Iron And Bituminous Washers, Galvanised Iron Clamps, Bolts And Nuts Including Scaffolding, Complete. 43 Providing And Fixing Valley Gutter Of 22 B.W.G. ( 0.8 Mm ) Plain Galvanised Iron Sheets 120 Cm Wide Withteak Wood Planking 20 Mm Thick Including Two Coats Of Coal-Taring The Upper Surface Of Plank ( Excluding Painting To Under Side Of Plank ) . 44 Providing And Fixing Valley Gutters Of 24 B.W.G. 0.63 Mm Thick G.I.Sheet 120 Cm. With 20 Mm Thick Teak Wood Planking Underneath Coal Tarring Etc. Complete. 45 Removing And Resetting Mangalore Tiles From Roof Including Refixing Loose Battens. 46 Removing G.I Or A.C.Sheet Roofing Including Purlins, Principal Rafters Etc. Including Sorting Serviceable And Unserviceable Materials, Stacking The Same As And Where Directed In The Compound Including Scaffolding Etc. Complete. 47 Providing And Fixing Solid Core Flush Door Shutter In Single Leaf 32 Mm Thick Decorative Type Of Exterior Grade As Per Detailed Drawings Approved Face Veneers 3 Mm Thick On Both Faces Or As Directed, All Necessary Beads, Mouldings And Lipping, Wrought Iron Hold Fasts, Chromium Plated Fixtures And Fastenings, With Brass Mortise Lock, Chromium Plated Handles On Both Sides, And Finishing With French Polish Etc. Complete. 48 Providing And Fixing 50 Mm. X 50 Mm. Mild Steel Square Pipe Framed Steel Windows Of Various Sizes As Per Details With Welded Square Bars 12 Mm. At 10 Cm. Center To Center Without Hot Dip Zinc Coating Without / With Ventilator Including Fabrication, Glazing With Plain / Obscured Glass Panes Of Approved Type And Quality, All Fixtures And Fastenings And Finishing With One Coat Of Primer Complete. 49 Providing And Fixing M.S. Grill Door 24 Kg / Sqm. Of Various Size As Per Detailed Drawings Without Hot Dip Coating, Iron Fixtures And Fastenings And 3 Coats Of Oil Painting Etc 50 Providing And Fixingpoly Venyl Chloridecoloured Ridge Tiles Over U Poly Venyl Chlorideroofingwherever Required Having Size 113 Cm X 41 Cm And Height 9.50 Cm For Ridge Including Fastening With Self Drilling Screw Having Washers Made Ofstainless Steel Complete. 51 Providing And Fixing In Position ( As Per 1868:1982 ) Aluminium Sliding Window Of Three Tracks With Rectangular Pipe 95 X 38.10 X 0.90 Mm. At Weight 0.637 Kg / Rmt. With Window Frame Bottom Track Section 92 X 31.75 X 1.30 Mm. At Weight 1.070 Kg / Rmt.. Top And Side Track Section 92 X 31.75 X 1.30 Mm. At Weight 0.933 Kg / Rmt. The Shutter Should Be Of Bearing Bottom 40 X 18 X 1.25 Mm. At Weight 0.417 Kg / Rmt. Inter Locking Section 40 X 18 X 1.10 Mm At Weight 0.469 Kg / Rmt. And Handle And Top Section 40 X 18 X 1.25 Mm. At Weight O.417 Kg / Rmt. As Per Detailed Drawings And As Directed By Engineer-In-Charge With All Necessary Aluminium Sections Fixtures And Fastenings Such As Roller Bearing In Nylon Casting And Self Locking Catch Fitted In Vertical Section Of Shutter Including 5 Mm. Thick Plain Glass And Aluminium Mosquito Net Shutter With Stainless Steel Jail With All Required Screws And Nuts Etc. Completewith Colour Anodising Without Box. 52 Dismantling Stone Masonry In Lime Or Cement Mortar Including Stacking The Materials As Directed With All Leads, Lifts Complete. 53 Providing And Fixing Solid Core Flush Door Shutter In Double Leaf 32Milimetrethick Decorative Type Of Exterior Grade As Per Detailed Drawings Approved Face Veneers 3Milimetrethick On Both Faces Or As Directed, All Necessary Beads, Mouldings And Lipping, Wrought Iron Hold Fasts, Chromium Plated Fixtures And Fastenings, With Brass Mortise Lock, Chromium Plated Handles On Both Sides, And Finishing With French Polish Etc. Complete. 54 Dismantling Brick Masonry In Lime Or Cement Mortar And Stacking The Materials As Directed With All Leads, Lifts, Complete. 55 Dismantling Stone Masonry In Mud Including Stacking The Materials As Directed With All Leads, Lifts Complete. 56 Removing Cement Tiles, Or Marble Or Polished Shahabad Floor Or Dado Without Bed Concrete Including Stacking The Materials As Directed With All Leads, Lifts, Complete. 57 Providing And Laying Cement Concrete Pipe Of I.S. 458:2003 Non Pressure-3 Classof 600 Milimetrediameterin Proper Line, Level And Slope Including Providingandfixing Collars In Cement Mortar 1:2 Complete. 58 Providing And Laying In Situ / Ready Mixcement Concrete M-20Of Trap / Granite / Quartzite / Gneissmetal For R.C.C. Workin Foundations Like Raft, Strip Foundations, Grillage Andfootings Of R.C.C. Columns And Steel Stanchions Etc. Including Bailing Out Water, Formwork, Laying / Pumpingcover Blocks, Compaction And Curing Roughening The Surface If Special Finish Is To Be Provided, ( Excluding Reinforcement And Structural Steel ) Etc. Complete, With Fully Automatic Micro Processor Based Plc With Scada Enabled Reversible Drum Type Mixer / Concrete Batch Mixplant ( Pan Mixer ) Etc. Complete, With Fine Aggregate ( Crushed Sand V.S.I. Grade ) . 59 Providing And Laying Cast In Situ / Ready Mix Cement Concrete M-20 Of Trap / Granite / Quartzite / Gneiss Metal For R.C.C. Columns As Per Detailed Designs And Drawing Or As Directed Including Centering, Formwork, Cover Blocks, Laying / Pumping, Compaction Finishing The Formed Surfaces With Cement Mortar 1:3 Of Sufficient Minimum Thickness To Give A Smooth And Even Surface Or Roughening If Special Finish Is To Be Provided And Curing Etc. Complete, ( Excluding Reinforcement And Structural Steel ) With Fully Automatic Micro Processor Based Plc With Scada Enabled Reversible Drum Type Mixer / Concrete Batch Mixplant ( Pan Mixer ) Etc. Complete With Fine Aggregate ( Crushed Sand V.S.I. Grade ) . 60 Providing And Laying Cast In Situ / Ready Mix Cement Concrete Mix-20 Of Trap / Granite / Quartzite / Gneiss Metal For Reinforced Cement Concrete Slabs And Landingsas Per Detailed Designs And Drawings Including Centering, Formwork, Cover Blocks, Laying / Pumping, Compactionfinishing The Formed Surfaces With Cement Mortar 1:3 Of Sufficient Minimum Thickness To Give A Smooth And Even Surface Or Roughening If Special Finish Is To Be Provided And Curing Etc. Complete, ( Excluding Reinforcement And Structural Steel ) With Fully Automatic Micro Processor Based Programmable Logic Controllerwithsuperwisery Control And Data Acquisitionenabled Reversible Drum Type Mixer / Concrete Batch Mixplant ( Pan Mixer ) Etc. Complete, With Fine Aggregate ( Crushed Sand V.S.I. Grade ) . 61 Providing And Laying Cast In Situ / Ready Mix Cement Concrete M-20 Of Trap / Granite / Quartzite / Gneiss Metal For R.C.C. Chajja As Per Detailed Design And Drawings Including Centering, Formwork, Cover Blocks Compacting , Curing , Finishing And Roughening The Surface If Special Finish Is To Be Provided And Curing Complete ( Excluding Reinforcement And Structural Steel ) , With Fully Automatic Micro Processor Based Plc With Scada Enabled Reversible Drum Type Mixer / Concrete Batch Mixplant ( Pan Mixer ) Etc. Complete, With Fine Aggregate ( Crushed Sand V.S.I. Grade ) . 62 Providing And Laying Cast In Situ / Ready Mix Cement Concrete In M-20 Of Trap / Granite / Quartzite / Gneiss Metal For R.C.C. Pardi Of Required Thickness Including Centering, Formwork, Cover Blocks, Laying / Pumping, Compacting, Curing, Finishing And Rougheningthem If Special Finish Is To Be Provided And Curing Complete, ( Excluding Reinforcement And Structural Steel ) With Fully Automatic Micro Processor Based Plc With Scada Enabled Reversible Drum Type Mixer / Concrete Batch Mixplant ( Pan Mixer ) Etc. Complete, With Fine Aggregate ( Crushed Sand V.S.I. Grade ) . 63 Excavation For Foundation In Soft Rock And Old Cement Or Lime Masonry Foundations Including Removing The Excavated Material Upto A Distance Of 50 Metres Beyond The Building Area And Stacking As Directed, Including Dewatering, Preparing The Bed For The Foundation And Necessary Back Filling With Available Earth / Murum, Ramming, Watering Including Shoring And Strutting, Dewatering Etc. Complete ( Lift Upto 1.5 M ) By Mechanical Means. 64 Excavation For Foundation In Hard Rock By Chiselling, Wedging, Line Drilling, Etc. Including Trimming And Levelling The Bed, Removing The Excavated Material Upto A Distance Of 50 Metres Beyond The Building Area Stacking As Directed, Dewatering And Back Filling With Available Earth / Murum Watering, Ramming Etc. Complete. ( Lift Upto 1.5 M ) By Mechanical Means. 65 Filling In Plinth And Floors With Contractors Soil. Sand Or Murum Materials In 15 Cm To 20 Cm Layers Including Watering & Compaction Complete. 66 Dismantling The R.C.C. Work 1:2:4 And Sorting Out The Materials Such As Steel Etc. As Directed And Stacking Them Within The Specified Lead As Directed. 67 Providing Internal Cement Plaster 20 Mm. Thick In Two Coats In Cement Mortar 1:3 Without Neeru Finish, To Concrete, Brick Surface, In All Positions Including Scaffolding And Curing Etc. Complete. 68 Providing Neeru Finish To Plastered Surfaces In All Positions Including Scaffolding And Curing Etc. Complete. 69 Providing Sand Faced Plaster Externally In Cement Mortar Using Approved Screened Sand, In All Positions Including Base Coat Of 15 Mm. Thick In Cement Mortar 1:4 Using Waterproofing Compound At 1 Kg Per Cement Bag Curing The Same For Not Less Than 2 Days And Keeping The Surface Of The Base Coat Rough To Receive The Sand Faced Treatment 6 To 8 Mm. Thick In Cement Mortar 1:4 Finishing The Surface By Taking Out Grains And Curing For Fourteen Days Scaffolding Etc.Complete. 70 Providing And Fabricating Structural Steel Work In Rolled Sections Like Joists, Channels, Angles, Tees Etc. As Per Detailed Design And Drawings Or As Directed Including Cutting, Fabricating, Hoisting, Erecting, Fixing In Position Making Riveted / Bolted / Welded Connections Without Connecting Plates, Braces Etc. And Including One Coat Of Anticorrosive Paint And Over It Two Coats Of Oil Painting Of Approved Quality And Shade Etc. Complete. 71 Providing And Fixing Reinforced Cement Concrete Heavy Duty ( 160 Kg ) Cover Of Size 60Centimeter X 45Centimeterwith Frame Over Inspection Chamber Etc. Complete. 72 Providing And Fixing Reinforced Cement Concretemedium Duty ( 140 Kg ) Cover Of Size 60Centimeter X 45Centimeterwith Frame Over Inspection Chamber Etc. Complete. 73 Providing And Fixing Reinforced Cement Concretemediumduty ( 100 Kg ) Cover Of Size 60 Centimeter X 45Centimeterwith Frame Over Inspection Chamber Etc. Complete. 74 Providing And Laying Cement Concrete Pipe Of I.S. 458:2003 Non Pressure-2 Classof 450 Milimetrediameterin Proper Line, Level And Slope Including Providingandfixing Collars In Cement Mortar 1:2 Complete. 75 Providing And Laying Concrete Pipe Of I.S. N.P.Class Of150 Mmdiameter In Proper Line, Level And Slope Including Necessary Collars, Excavation, Laying, Fixing With Collars In Cement Mortar 1:1 And Refilling The Trench Complete. 76 Providing And Laying Concrete Pipe Of I.S.Np.Class Of225 Mmdiameter In Proper Line, Level And Slope Including Necessary Collars, Excavation, Laying, Fixing With Collars In Cement Mortar 1:1 And Refilling The Trench Complete. 77 Providing And Laying Concrete Pipe Of I.S.Np.Class Of300 Mmdiameter In Proper Line, Level And Slope Including Necessary Collars, Excavation, Laying, Fixing With Collars In Cement Mortar 1:1 And Refilling The Trench Complete. 78 Providing And Laying Cement Concrete Pipe Of I.S. 458:2003 Non Pressure-2 Classof 800 Milimetrediameterin Proper Line, Level And Slope Including Providingandfixing Collars In Cement Mortar 1:2 Complete. 79 Providing And Fixing H.D.P Container Syntex Or Alike One Piece Moulded Water Tank Made Out Of High Density Polythyler And Built Corrugated Inclusive Of Delivery Up To Destination Hoisting And Fixing Of Accessories Such As Inlet, Outlet Overflow Pipe Inclusive Of All Tanks Capacity Between 200 To 1000 Liters. 80 Providing And Fixing On Walls / Ceiling / Floor 15 Milimetrediameterchlorinated Poly Venyl Chloride Pipe With Necessary Fittings, Remaking Good The Demolished Portion. Including Removing Existing Pipe Line If Necessary And Conveying And Stacking The Same In Pwd Chowky Or As Directedcomplete. 81 Providing And Laying Cement Concrete Pipe Of I.S. 458:2003 Non Pressure-3 Classof1200 Milimetrediameterin Proper Line, Level And Slope Including Providingandfixing Collars In Cement Mortar 1:2 Complete. 82 Providing And Laying Cement Concrete Pipe Of I.S. 458:2003 Non Pressure-3 Classof1000 Milimetrediameterin Proper Line, Level And Slope Including Providingandfixing Collars In Cement Mortar 1:2 Complete. 83 Providing And Laying Cement Concrete Pipe Of I.S. 458:2003 Non Pressure-3 Classof900 Milimetrediameterin Proper Line, Level And Slope Including Providingandfixing Collars In Cement Mortar 1:2 Complete. 84 Providing And Laying Cement Concrete Pipe Of I.S. 458:2003 Non Pressure-3 Classof 800 Milimetrediameterin Proper Line, Level And Slope Including Providingandfixing Collars In Cement Mortar 1:2 Complete. 85 Providing And Applying Two Coats Of Lead / Zinc Base Oil Paint / Bituminous Paint Of Approved Colour And Shade To New Wood Work And Fiber Boards Including Preparing The Surface, Knotting, Scaffolding If Necessary, Excluding Primer Coat Etc. Complete. 86 Providing And Fixing Plain Zinc Sheeting Of 0.80 Mm Thick ( 22 B.W.G. ) Over The Ridge Hip Or Velley To Galvanised Iron Sheet Roofing Including All Fastening And Bolt Galvanised Iron Screws And Bolts And Lead And Bitumen Washers Complete. ( Weight Of 6.8 Kg / Sq.M. ) 87 Providing And Fixing Corrugated Galvanised Iron Sheets Of 0.63 Mm Thickness ( 24 B.W.G. ) For Roofing Without Wind Tiles Including Fastening With Galvanised Iron Screw And Bolts And Lead And Bitumen Washers As Per Drawing Complete ( Weight Of 5.5 Kg Per Sqm. ) 88 Providing And Applying One Coat Of Lead / Zinc Base Oil Paint / Bituminous Paint Of Approved Colour And Shade To Old Wood Work Previously Painted And Fiber Boards Including If Necessary Scaffolding, Preparing Surface Excluding Primer Coat Etc. Complete. 89 Scrapping The Old Plastered Internal Surface With Sand Paper And Coating The Entire Surface With Mixture Of Whiting Or Glue And Linseed Oil Including Scaffolding Etc. Complete As Directed. 90 Washing And Cleaning Of Decorated Wall Surfaces With Soap, Soda And Water Etc. Complete. 91 Providing And Applying Plastic Emulsion Paint Of Approved Quality, Colour And Shade To Old / New Surfaces In Two Coats Including Scaffolding, Preparing The Surface. ( Excluding The Primer Coat ) Complete. 92 Providing And Laying225 Mmdiameter Half Round Salt Glazed Stoneware Pipe Including Fitings Such As Bends, Tees, Single Junction, Double Junctions Laying Jionting ( Including Excavation And Refilling The Trenches ) Complete 93 Providingandlayinginsitucementconcretem-30Withtremixtreatmentfor200mm Thickness For Concrete Road Is Including Laying Plastic Sheet For 125 Micron Thickness With Groovecuttingof4mmwideand20mmdeepwithnecessaryrefillingwithbitumen ( Excluding Reinforcement ) With Coarse And Fine Aggregate ( Vsi Grade Finely Washed Crushed Sand ) Etc. Complete 94 Providing And Laying In Situ / Ready Mix M20 Cc Of Trap / Granite / Quartzite / Gneiss Metal For Wearing Course 8Cm Thick Including Compacting, Finishing, Curing Andfilling In Joints With Bitumenetc.Complete. ( Withfullyautomaticmicroprocessorbasedplcwithscada Enabled Concrete Batch Mix Plant / Pan Mixer With Fine Agreegates Of Required Specifications ( Vsi Sand Finely Washed Etc ) 95 Providing And Fixing Mild Steel Grill Work For Windows, Ventilators Etc. 20 Kilogram / Square Metre Asperdrawing Including Fixtures, Necessarywelding Andpainting Withone Coatsof Anticorrosive Paint And Two Coats Of Oil Painting Complete. 96 8Mm

INR 3000 /-

INR 50000.0 /-

INR 50 Lakhs /-

Name of Work:YEARLY TENDER FOR CIVIL WORK AT VADGON NAGARPANCHYAT VADGAON MAVAL

Sl. No.	Item Description
1	YEARLY TENDER FOR CIVIL WORK AT VADGON NAGARPANCHYAT VADGAON MAVAL
2	Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting, dewatering etc. complete. (Lift upto 1.5 m.) by Mechanical Means.
3	Excavation for foundation in Hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting, dewatering etc. complete. (Lift from 1.5 to 3.0 m.) by Manual Means.
4	Removing lime or lean cement concrete including stacking the spoils as directed with all leads, lifts complete.
5	Providing drytraprubble stone soling 15cm to 20cm thick including hand packing and compacting complete.
6	Providing second class Burnt Brick masonry with conventional /I. S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls /in plinth external walls including bailing out water manually, striking joints on unexposed faces, raking out joints on exposed faces and watering complete.
7	Providing second class Burnt Brick masonry with conventional / I. S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding complete.
8	Providing and laying Cast in situ/ Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand V.S.I. Grade).
9	Providing internal cement plaster 12 mm. thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.
10	Providing fine cement finish 1.5 milimetre thick over green plaster surface including scaffolding curing etc. complete.
11	Providing and fixing in position TMT FE -500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules, including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.
12	Conveying materials obtained from road cutting including all lifts, laying in layers of 20 cm. to 30 cm. breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than97% of standard proctor density for a lead of over 50 m to 300 m. inclusive from the site of excavation to the site of deposition as directed.
13	Providing and fixing mild steel grill work for windows, ventilators, etc.15 kg/sq.m as per drawing including fixtures, necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete.
14	Providing and errecting chain link fencing 1.6 metre height with galvanised iron chain link of size 50 x 50 milimetre 8 guage thick and fixed 75 milimetre above Ground level on verticalMild Steel Angle of 40x40x6 milimetre size including excavating pits for foundation and embeded in cement concrete block of 1:4:8 mix of size 450x450x670 milimetre at 1.75 metre center to center with iron bar 16 milimetrediameteras hold fast including welding link with angle frame at 30 cm. c/c nuts and bolts and horizontal Mild Steel Angles at top and bottom of 25x25x5 metre size and vertical Mild Steel flat 35 x 5 metre and 25 x 5 metre horizontal including cross support of 40x40x6 metre Angles both sides at every corner or bends embeded in concrete blocks of 1:4:8 of size 450x450x670 milimetre including 3 coats of oil painting etc. complete.
15	Providing and laying concrete pipe ofIndian Standard Non Pressure class of300 milimetrediameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete.
16	Providing & constructing Brick Masonry Inspection Chamber 60 cm x 45 cm x 90 cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half roundGlazedStone Ware pipes, Brick Masonry, plastering from inside and airtight C. I.cover of 75 Kg with lid and frame fixed in cement concrete etc. complete.
17	Providing & constructing Brick Masonry Inspection Chamber 60 cm x 45 cm x 90 cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round GlazedStone Warepipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. cover medium duty 140 kilogram with frame etc. complete.
18	Providing hard murum side shoulder including supplying hard murum at the road site, including spreading and compacting for sidewidth layers on each side with power roller including artificial watering etc complete.
19	Providing and fixing hume pipe septic tank 900 mmdiameter with vent pipe and cap including necessary (excluding excavation and laying).
20	Providing uncoursed rubble masonary oftrap stones in cement mortar 1:6 in foundations and plinth of inner walls/in plinth of external walls including bailing out water manually, striking joints on exposed faces and watering complete.
21	Providing uncoursed rubble masonary oftrapstones in cement mortar 1:6 in superstructure including raking out joints when plastering is to be done/striking joints when no plastering is to be done watering and scaffolding complete.
22	Providing and applying white-wash in two coats on old/new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing & brooming down complete.
23	Providing and applying colour-wash of approved colour and shade in two coats to new surface including scaffolding, brushing and brooming down (excluding base coat of white-wash) etc. complete.
24	Providing and applying washable powder distemper of approved colour and shade to old & new surfaces in one coat including scaffolding, preparing the surfaces (excluding the priming coat.) complete.
25	Providing & applying washable oil-bound distemper of approved colour and shade to old & new surfaces in one coat including scaffolding, preparing the surfaces. (excluding the primer coat) complete.
26	Providing and applying interior wall finish luster of Asian/ Berger/ Nerolac/ Dulux Paints or equivalent make on internal wall surface as detailed below Scrapping the surface with emery paper and wipe clean. Applying Asian/ Berger/ Nerolac/ Duuex Paints or equivalent wall primer with brushwith mineral turpentine with brush 8 to 10% and oil 15 to 20% with roller and allowing to dry for a period 6 to 8 hours. Applying Asian/ Berger/ Nerolac/ Dulex Paints or equivalent Acrylic wall putty with appropriate proportion of water allowing to dry for period 4 to 6 hours. Scrapping with Emery paper 180 and wipe clean. Applying Asian/ Berger/ Nerolac/ Dulux Paints or equivalent wall primer with brush with mineral turpentine 8 to 10% and oil 15 to 20% with roller Scrapping Emery paper 320 and wipe clean, Applying Asian/ Berger/ Nerolac/ Dulux Paints or equivalent interior wall finish luster 1st coat with brush/ rubber/ spray with mineral turpentine 7 to 9% and Oil with roller 19 to 21% After 8 hours of activity Applying 2nd coat of Asian / Berger / Nerolac / Dulux Paints or equivalent interior wall finish Lustre with mineral turpentine 7 to 9 % with brush and Oil with roller 19 to 21% after allowing dry for the period of 6 to 8 hours activity (With prior approval of S.E.).
27	Providing & applying two coats of lead/ zinc base oil paint/ bituminious paint of approved colour to new structural steel work and iron work in buildings including scaffolding if necessary, cleaning and preparing the surface etc.complete.(excluding primer coat).
28	Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to old plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete.
29	Providing and laying rough Shahabad Stone flooring 25 mm to 30 mmthick & of required width in plain/ diamond pattern on a bed of 1:6 C.M. includingcement float, striking joints, pointing in cement mortar 1:3 curing and cleaning etc.complete
30	Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in cement mortar 1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with cement mortar1:3 admixed with approved water proofing compound and finally top finishing with average 20 milimetre thick layers of same mortar added with jute fiber at 1 kilogram per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300 milimetre x 300 milimetre making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete.
31	Providing and laying polished Kotah stone flooring 25mm to 30mm thick & of reqd. width in plain/ diamond pattern on a bed of 1:6 cement mortar including cement float,filling joints with neat cement slurry,curing,polishing and cleaning complete.
32	Providing and laying cement concrete 50 mm. thick with M-15 cement concrete laid to proper level and slope in alternate bays including compaction filling joints, marking lines to give the appearance of tiles of 30 cm. x 30 cm. or other size laiddiameter gonally/square etc finishing smooth (with extra cement) in any colour as directed and curing complete with CrushedSand.
33	Providing and laying polished machine cut machine polished Kotah stone slabs 20 to 25 mm thick for treads and risers of steps and staircases, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning complete.
34	Providing sills of Marble other than makrana 20 mm. to 25 mm. thick, on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing, rounding edges and cleaning complete.
35	Providing and fixing black kadappa stone as shelves 25 mm. thick machine polished, extending the polish upto 20 cm. width on lowerside, rounding corners, laying in position jointing with bedding cement mortar 1:4 proportion curing etc. complete.
36	Providing and laying ceramic tiles having size 30 cm. x 30 cm. conforming I.S.15622/2006 (group D II-A) and 7 to 8 mm. thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/ colour cement slurry cleaning curing etc. complete.
37	Providing Mirror polishing to Kota Stone Flooring including using all necessary stones and equipments cleaning, washingetc. complete.
38	Providing and laying vitrified mirror/ glossy finish tiles for Flooringof decorative type having size 590 mm. to 605 mm. x 590 mm. to 605 mm. of 8 to 10 mm. thickness and confirming to I.S. 15622: 2006 (group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearingetc. complete.
39	Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 60 mm. thickness of having a strength of 300 kg/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm. thick including skirting joints and cleaning etc. complete
40	Providing and fixing plain zinc sheeting of 0.80 milimetre thick (22 B.W.G.) over the ridge hip or velley to galvanised iron sheet roofing including all fastening and bolt galvanised iron screws and bolts and lead and bitumen washers complete. ( Weight of 6.8 kg per Square metre).
41	Providing and fixing 6.00 mm thick I.S.I. mark Asbestos Cement Corrugated sheet roofing including galvanised iron "J " or "L" hook bolts galvanised ironand bituminous G.I.washers, galvanised iron clamps, bolts and nuts and scaffolding complete.
42	Providing and fixing 6 mm thick I.S.I. mark Asbestos cement ridge capping for roofing including galvanised iron hooks, bolts, galvanised iron and bituminous washers, galvanised iron clamps, bolts and nuts including scaffolding, complete.
43	Providing and fixing valley gutter of 22 B.W.G. (0.8 mm) plain galvanised iron sheets 120 cm wide withteak wood planking 20 mm thick including two coats of coal-taring the upper surface of plank (excluding painting to under side of plank).
44	Providing and fixing valley gutters of 24 B.W.G. 0.63 mm thick G.I.sheet 120 cm. with 20 mm thick teak wood planking underneath coal tarring etc. complete.
45	Removing and resetting Mangalore tiles from roof including refixing loose battens.
46	Removing G.I or A.C.sheet roofing including purlins, principal rafters etc. including sorting serviceable and unserviceable materials, stacking the same as and where directed in the compound including scaffolding etc. complete.
47	Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete.
48	Providing and fixing 50 mm. x 50 mm. Mild Steel square pipe framed steel windows of various sizes as per details with welded square bars 12 mm. at 10 cm. center to center without hot dip zinc coating without/ with ventilator including fabrication, glazing with plain/ obscured glass panes of approved type and quality, all fixtures and fastenings and finishing with one coat of primer complete.
49	Providing and fixing M.S. grill door 24 kg/sqm. of various size as per detailed drawings without hot dip coating, iron fixtures and fastenings and 3 coats of oil painting etc
50	Providing and fixingPoly Venyl Chloridecoloured Ridge tiles over U Poly Venyl Chlorideroofingwherever required having size 113 cm x 41 cm and height 9.50 cm for ridge including fastening with self drilling screw having washers made ofstainless steel complete.
51	Providing and fixing in position (as per 1868:1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm. at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm. at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm. at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm. at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm. at weight o.417 kg/Rmt. As per detailed drawings and as directed by Engineer-in-charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm. thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc. completewith colour Anodising without box.
52	Dismantling stone masonry in lime or cement mortar including stacking the materials as directed with all leads, lifts complete.
53	Providing and fixing solid core flush door shutter in double leaf 32milimetrethick decorative type of exterior grade as per detailed drawings approved face veneers 3milimetrethick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete.
54	Dismantling brick masonry in lime or cement mortar and stacking the materials as directed with all leads, lifts, complete.
55	Dismantling stone masonry in mud including stacking the materials as directed with all leads, lifts complete.
56	Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts, complete.
57	Providing and laying cement concrete pipe of I.S. 458:2003 non pressure-3 classof 600 milimetrediameterin proper line, level and slope including providingandfixing collars in cement mortar 1:2 complete.
58	Providing and laying in situ/ Ready Mixcement concrete M-20of trap/ granite/quartzite/ gneissmetal for R.C.C. workin foundations like raft, strip foundations, grillage andfootings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, laying/ pumpingcover blocks, compaction and curing roughening the surface if special finish is to be provided, (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled Reversible Drum Type mixer/ concrete Batch Mixplant (Pan mixer) etc. complete, with fine aggregate (Crushed sand V.S.I. Grade).
59	Providing and laying cast in situ/ Ready Mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/ pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based PLC with SCADA enabled Reversible Drum Type mixer/ concrete Batch Mixplant (Pan mixer) etc. complete with fine aggregate (Crushed sand V.S.I. Grade).
60	Providing and laying Cast in situ/ Ready Mix cement concrete Mix-20 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete Slabs and Landingsas per detailed designs and drawings including centering, formwork, cover blocks, laying/ pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based Programmable Logic ControllerwithSuperwisery Control and Data Acquisitionenabled Reversible Drum Type mixer/ concrete Batch Mixplant (Pan mixer) etc. complete, with fine aggregate (Crushed sand V.S.I. Grade).
61	Providing and laying Cast in situ/ Ready Mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. Chajja as per detailed design and drawings including centering, formwork, cover blocks compacting , curing , finishing and roughening the surface if special finish is to be provided and curing complete (Excluding reinforcement and structural steel), with fully automatic micro processor based PLC with SCADA enabled Reversible Drum Type mixer/ concrete Batch Mixplant (Pan mixer) etc. complete, with fine aggregate (Crushed sand V.S.I. Grade).
62	Providing and laying Cast in situ/ Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. Pardi of required thickness including centering, formwork, cover blocks, laying/ pumping, compacting, curing, finishing and rougheningthem if special finish is to be provided and curing complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based PLC with SCADA enabled Reversible Drum Type mixer/ concrete Batch Mixplant (Pan mixer) etc. complete, with fine aggregate (Crushed sand V.S.I. Grade).
63	Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth /murum, ramming, watering including shoring and strutting, dewatering etc. complete (lift upto 1.5 m)by Mechanical Means.
64	Excavation for foundation in Hard rock by chiselling, wedging, line drilling, etc. including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the building area stacking as directed, dewatering and back filling with available earth/ murum watering, ramming etc. complete. (Lift upto 1.5 m) by Mechanical Means.
65	Filling in plinth and floors with contractors soil. Sand or murum materials in 15 cm to 20 cm layers including watering & compaction complete.
66	Dismantling the R.C.C. work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed.
67	Providing internal cement plaster 20 mm. thick in two coats in cement mortar 1:3 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete.
68	Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete.
69	Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm. thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm. thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.
70	Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted /bolted / welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.
71	Providing and fixing reinforced cement concrete Heavy duty (160 Kg) cover of size 60centimeter x 45centimeterwith frame over inspection chamber etc. complete.
72	Providing and fixing reinforced cement concreteMedium duty (140 Kg) cover of size 60centimeter x 45centimeterwith frame over inspection chamber etc. complete.
73	Providing and fixing reinforced cement concreteMediumduty (100 Kg) cover of size 60 centimeter x 45centimeterwith frame over inspection chamber etc. complete.
74	Providing and laying cement concrete pipe of I.S. 458:2003 non pressure-2 classof 450 milimetrediameterin proper line, level and slope including providingandfixing collars in cement mortar 1:2 complete.
75	Providing and laying concrete pipe of I.S. N.P.class of150 mmdiameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete.
76	Providing and laying concrete pipe of I.S.NP.class of225 mmdiameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete.
77	Providing and laying concrete pipe of I.S.NP.class of300 mmdiameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete.
78	Providing and laying cement concrete pipe of I.S. 458:2003 non pressure-2 classof 800 milimetrediameterin proper line, level and slope including providingandfixing collars in cement mortar 1:2 complete.
79	Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters.
80	Providing and fixing on walls / ceiling / floor 15 milimetrediameterChlorinated Poly Venyl Chloride pipe with necessary fittings, remaking good the demolished portion. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directedcomplete.
81	Providing and laying cement concrete pipe of I.S. 458:2003 non pressure-3 classof1200 milimetrediameterin proper line, level and slope including providingandfixing collars in cement mortar 1:2 complete.
82	Providing and laying cement concrete pipe of I.S. 458:2003 non pressure-3 classof1000 milimetrediameterin proper line, level and slope including providingandfixing collars in cement mortar 1:2 complete.
83	Providing and laying cement concrete pipe of I.S. 458:2003 non pressure-3 classof900 milimetrediameterin proper line, level and slope including providingandfixing collars in cement mortar 1:2 complete.
84	Providing and laying cement concrete pipe of I.S. 458:2003 non pressure-3 classof 800 milimetrediameterin proper line, level and slope including providingandfixing collars in cement mortar 1:2 complete.
85	Providing and applying two coats of lead/ zinc base oil paint/bituminous paint of approved colour and shade to new wood work and fiber boards including preparing the surface, knotting, scaffolding if necessary, excluding primer coat etc. complete.
86	Providing and fixing plain zinc sheeting of 0.80 mm thick (22 B.W.G.) over the ridge hip or velley to galvanised iron sheet roofing including all fastening and bolt galvanised iron screws and bolts and lead and bitumen washers complete. ( Weight of 6.8 Kg/Sq.m.)
87	Providing and fixing corrugated galvanised iron sheets of 0.63 mm thickness (24 B.W.G.) for roofing without wind tiles including fastening with galvanised iron screw and bolts and lead and bitumen washers as per drawing complete (weight of 5.5 kg per Sqm.)
88	Providing and applying one coat of lead/ zinc base oil paint/ bituminous paint of approved colour and shade to old wood work previously painted and fiber boards including if necessary scaffolding, preparing surface excluding primer coat etc. complete.
89	Scrapping the old plastered internal surface with sand paper and coating the entire surface with mixture of whiting or glue and linseed oil including scaffolding etc. complete as directed.
90	Washing and cleaning of decorated wall surfaces with soap, soda and water etc. complete.
91	Providing and applying plastic emulsion paint of approved quality, colour and shade to old/ new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat) complete.
92	Providing and laying225 mmdiameter half round salt glazed stoneware pipe including fitings such as bends, tees, single junction,double junctions laying jionting (including excavation and refilling the trenches) complete
93	ProvidingandlayinginsitucementconcreteM-30withtremixtreatmentfor200mm thickness for Concrete Road is including laying plastic sheet for 125 micron thickness with groovecuttingof4mmwideand20mmdeepwithnecessaryrefillingwithbitumen( excluding reinforcement) with coarse and fine aggregate ( VSI grade finely washed crushed sand) etc. complete
94	Providing and laying in situ / ready mix M20 CC of trap/ granite/ quartzite/ gneiss metal for wearing course 8cm thick including compacting, finishing, curing andfilling in joints with bitumenetc.complete.(withfullyautomaticmicroprocessorbasedPLCwithSCADA enabled concrete batch mix plant / pan mixer with fine agreegates of required specifications ( VSI sand finely washed etc )
95	Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram/Square Metre asperdrawing including fixtures,necessarywelding andpainting withone coatsof anticorrosive paint and two coats of oil painting complete.
96	8mm