Tender For Provision Of Connecting Pathway, Internal Water Supply, Electricity Plug And Spl Repair Of Bldg No Np-36 Under Ge(S) Binnaguri
Tender Value
46 Lakhs
Estimated cost
Bid Submission
06 Mar 2024
0 days left
EMD
92000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
binnaguri → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Provision Of Connecting Pathway, Internal Water Supply, Electricity Plug And Spl Repair Of Bldg No Np-36 Under Ge(S) Binnaguri
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkat with shutter exc. 1.5sqm and n.exc 4sqm each complete all as specified and directed. |
| 2 | Dismantling ofPlain or corrugated asbestos sheet any gauge, thickness, including Nainital orsimilarpattern roof coverings sheets complete all as specified and directed. |
| 3 | Demolition of cement concrete in ground floor and paving n exc15 cm thikness(below or above ground) complete all as specified and directed. |
| 4 | Demolition of cement concrete of any position in any direction complete all as specified and directed. |
| 5 | Demolition of brick work built in cement mortar etc complete all as specified and directed. |
| 6 | Taking down cement plaster on brick or concrete surfaces including raking out joints,hacking for key scrubbing down with water etc.complete all as specified and directed. |
| 7 | M&L brick work with sub class \"B\" brick straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed. |
| 8 | M&L for brickwork with sub-class \"B\" brick, straight or curved on plan exc 6m mean radius built in cement mortar 1:4. complete all as specified and as directed. |
| 9 | S&FPre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 10 | S & F pre painted galvalume aluminium zinc coating GI Based plain steel sheet 0.50 mm thick of any colour having tensile strength 550 Mpa as in eaves board fixed with selp tapping screw complete all as specified and directed. |
| 11 | M&L for 20 mm thick (10mm+10mm)plaster in CM (1:4)on fair faces of brick/concrete surface top layer finished even and fairwithout using extra cement with water proofing compound (WPC will be measured and paid separately) complete all as specified and directed. |
| 12 | M&L for plastering in cement mortar (1:6), 15 mm thick on brick /surfaces of other than fair face even and smooth without using extra cement complete all as specified and directed.. |
| 13 | Supply only Integral water proofing compound complete all as specified and directed. |
| 14 | M&L for laying machine cut kota stone slab flooring 20-25mm thick over cement screed base of 15mm thick (average thickness) in cement motar 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 15 | M&L for laying machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed 10mm thick (average thickness) in cement motar 1:4 laid and jointed with grey cement slurryto match the shade of the slab including rubbing and polishing complete all as specified and directed |
| 16 | M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed (Punned thickness 18 cm shall be considered for payment as per para 19.75 of SSR Part-I) |
| 17 | S&F for pressed steel frames for doors with one or more rebates including necessary lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 125 x60 mm complete all as specified and directed. |
| 18 | M&L for PCC (1:3:6) type C-1 with using 20mm graded stone aggregate as in bed blocks for fixing holdfast or filling hollow space of steel frame etc all complete as specified and as directed. |
| 19 | M&L for providing cement concrete typeB-0(1:2:4)(using 12.5 mm size graded aggregate) as in coping set incl weathering, slightly rounded or chamfered angles & thickness complete all as specified and as directed. |
| 20 | S&Ffor plain, framed, factory made panelled shutters 35 mm thick (any number of panels) , with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats complete all as specified and directed.. |
| 21 | S&F 35 mm thick Second class Hardwood, FACTORY MADE Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars),edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified inSSR Part I, Section 8, clause 8.24(b); supplied and fitted to chowkats complete all as specified and directed. |
| 22 | S&F Stainless steel butt hinges medium weight 100mm long complete all as specified and directed. |
| 23 | S&F Aluminium anodizedbarrel tower bolts, extruded section 200mm long complete all as specified and directed. |
| 24 | S&F Aluminium anodized handles, D type, 150mm long complete all as specified and directed. |
| 25 | S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts andslidingbolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 26 | Supply & fix in repair of steel windows with side hung shutters including box type hinges with steel handle,and steel peg stay complete withglazing bars, dovetailed or welded complete all as specified and directed. |
| 27 | M&L for Framed work such as grills, framed guard bars,for window by welding it to existing window frameand similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 28 | S&F in repairof factory made steel windows with side hung shutters openable type including friction/projected typehinges steel handle and peg stay complete withoutglazing bars fixed to existiog opening and making to match as per existing surfaces complete all as specified and directed.. |
| 29 | S&F in repairSteel ventilators with fixed typecomplete all as specified and directed. |
| 30 | M&L applying two coats of weather proof exterior emulsion paint of standard quality and make ,over a coat of white primer including preparation of new /old wall surfaces complete all as specified and directed. |
| 31 | M&L for applying two coats of oil bound distemper over one coat of primer on wallsincluding preperation of new or previously untreated surfaces complete all as specified & directed. |
| 32 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation board/slabs/blankets, any thickness, including cover fillets complete all as specified and directed. |
| 33 | M&L in repair for 4 mm thick Non asbestos fibre cement building boards fixed or laid/inserted to timber/GI/Aluminium frame work with screws complete all as specified and directed. |
| 34 | S&F Anodised aluminium snap grid frame work for false ceiling for size of grid 605 x 605 mm all as specified complete all as specified and directed. |
| 35 | M & L preparation of old surface & applying one coats of synthetic enamel paintwooden surfaces exc 10 cm girthcomplete all as specified and directed. |
| 36 | M&L for two coat of synthetic enamel paint over a coat of red oxide primer including preparation of newly steel surfaces complete all as specified and directed. |
| 37 | M&L for Preparation of new steel surfaces of any description n.exc.10 cm width or girth and applyingtwo coats of synthetic enamel paint over a coat of red oxideprimer. |
| 38 | M&L for 75mm thick PCC type C-2 , 1:3:6 (40mm graded stone aggregate) al in plinth protection/ foot pathfinished even and fair without using extra cement all as directed |
| 39 | M&Lfor 100 mm thickcement concrete 1:3:6type C-2 (using 40 mm graded stone aggregate) as in path /steps laid with and incl use and waste of form workand finishing the surface even and rough to receivethe topping layer ortiling complete all as specified and as directed. |
| 40 | M &L for Stone Hardcore of gauge n exc. 63 mm, spread and levelled in layers n exc.15 cm thick, watered and rammed to a true surface complete all as specified and as directed by the Engr-in-Charge. |
| 41 | M&L for PCC 1:3:6 type C1 using 20mm graded stone aggregate as in surface drain including forming fair finished to drain channel. |
| 42 | Extra forming fair finished drain as in channel 30 cm inner grith in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc. |
| 43 | M&L for chemically treated machine pressed precast concrete coloured interlocking paver block with Grey cement and pigment any shape and size conforming to IS 15658-2006 of 80 mm thickness M-40 Grade. |
| 44 | Surface excavation n.exc (not exceeding) 30 cm deep and avg 15 cm deep and getting out in soft / loose soil complete all as specified and as directed. |
| 45 | Excavation in trenches n.exc 1.5 in deep and n.exc 1.5 m wide for foundation etc not exc 10 sqm on plan and getting out in soft / loose soil complete all as specified and directed |
| 46 | Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out in soft/ loose soil complete all as specified and as directed. |
| 47 | Returning filling in, incl spreading, levelling watering & well ramming in layers n.exc 25cm in soft/loose soil complete all as specified and directed |
| 48 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed |
| 49 | Spreading and leveling in layers n.exc 25 cm thick selected earth under floors including watering well ramming etc complete all as specified and as directed. |
| 50 | M & L for cement concrete type C-2 1:3:6 (using 40mm graded aggregate) in foundation filling mass concrete complete all as specified and as directed. |
| 51 | M & L 80 mm thick M-40 grade factory made vibratory compacted cement concrete rubber moulded, interlocking paver block any shape and size confiroming to IS 15658-2006 with grey cement and pigment as approved laid over and incl 25 mm thick consolidated sand cushion and joints filled with sand complete all as specified and directd. |
| 52 | M & L reinforced concrete pipes, class NP2, drain pipes of radius 600 mm laid in trenches and jointed as specified and as directed. |
| 53 | M&L PCC 1:3:6 type C-2 concrete bed to drain pipes including packing under & haunching against the sides of pipes after they are laid & tested dia of pipe 600mm complete all as specified and as directed. |
| 54 | M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar (1:6) finished even & fair complete all as specified and as directed. |
| 55 | M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement morter 1:6 finished even and smooth without using extra cement complete all as specified and as directed. |
| 56 | M & L for preparing new Plasteredsurfaces of walls and finishing the walls with Acrylic smooth exterior paint of required shade : New work (Two or more coats applied @1.67 Ltr/10 Sqm over and including priming coat of exterior primer applied @ 2.20 Kg/ 10 sqm) complete all as specified and as directed.Make of Weather proof exterior acrylic emulsion and primer : Asian Apex Ultima/Berger weather coat long life 10 |
| 57 | Supply and fix anodised aluminium frame powder coated for partition(minimum thickness of powder coating 50 micron) with one or more rebates including and joining cleat for fixing , glazing clips, rubber packing screws etc.complete all as specified and as directed. |
| 58 | Prelaminated Particle board12 mm thickinterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screw to timber frame work all as complete all as specified and as directed. |
| 59 | M& L for fabrication and fixing of powder coated aluminium door shutter fixed with rubber gasket, stopper, cleats, handlesetc complete for aluminium frame of size 101.6mm x 44.45mm x 2mm and section of bottom and top rail of section114mmx44.45mmx2mm thick and and lock rail shutter frame of 83mm x 44.45mm x 2 mm with and including panels of 5.5 mm thick plain/frosted float glass,and with anodised aluminium snap beading of size 18.2mmx16.66mm scred for fixing fully including double action door spring hydraulically regulated made up of 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and all necessary fittinngsand EPDM rubber packing each shutter shall be provided with two decorative type aluminium disc handle of 150 mm dia per shutter ,1 no heavy duty door shutter 1no 200mm long aluminium tower bolt per shutter complete all as specified and as directed. |
| 60 | M&L for preparing new plastered surfaces of wall with 1 mm wall care putty and applying two coat of distemper oil emulsion over a coat of primer complete all as specified. |
| 61 | Cutting holes into or through brick walls built, in cement mortar or cement lime mortarmaking good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required complete all as specified and as directed. |
| 62 | S&F for 15mm bore tube medium grade galvanized with all fitting and fixedto wall, ceiling or laid in floor and trench complete all as specified and directed. |
| 63 | S&F 15mm bore Bib taps, cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. |
| 64 | S&F for 20mm bore tube medium grade galvanized with all fitting and fixedto wall, ceiling or laid in floor and trench complete all as specified and directed. |
| 65 | M&L for glazed ceramic coloured joint free tiles 300x450x7 mm thick as on vertical surface of wall such as skirting, dado, riser etc. in Bath, WC, Kitchen and inside cupboards set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed. |
| 66 | Excavating in post holes (or similar holes) each n.exc 0.5 Cum getting out and removing surplus soil to a distance n exc 50m and making good surfaces in soft/loose soil complete all as specified and directed. |
| 67 | S&F for mild steel tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240 Complete all as specified and as directed. |
| 68 | M&L for MS flat iron bent to shape, holes drilled etc complete as inwind ties etc complete all as specifed and as directed. |
| 69 | M&L for MS plate of any size & thickness, holes drilledor without drilled etc complete all as specified and as directed. |
| 70 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc for taking credit ( credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed. |
| 71 | M&L for point wiring complete with 1.5 Sqmm multistranded copper conductor single core PVC insulated unsheathed FR-LS cable 1100 volts grade (ISI marked) with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit not less that 20mm dia and conduit accessories (ISI marked) fixed over wall/fixed to roof, ceiling etc including provision of 1.5 Sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LS (ISI marked) as earth continuity conductor connected to common earth dolly, fabricated sunken terminal box made out of GI sheet steel not less than 1.22 mm thick for boxes upto a size of 200 x 300mm and above this size not less than 1.63 mm thick duly painted with aluminum inside and anticorrosive paint outside, concealed in walls, with 3mm thick bakelite/plastic laminated sheet top cover fixed with cadmium plated iron screws for housing switches, socket outlets, fan regulators etc duly earthed including fixing arrangement for PVC conduits and sunken boxes over surface of wall/floor and matching with existing specifications.Connections of cable with MCBs or bus bar shall be sone through proper size copper/brass thimbles. conduit shall be fixed on surface with necessary saddles at no extra cost, One light point controlled by one way switch 5/6 amps all as specified and as directed. |
| 72 | All as per item No 66 above but One ceiling fan/Exhaut fan point controlled by one way switch 5/6 amps complete all as specified and directed. |
| 73 | All as per item No 66 above but One socket out let 5/6 amps point on the same board complete all as specified and directed. |
| 74 | All as per item No 66 above butOne socket out let 5/6 amps point on the independent board complete all as specified and directed. |
| 75 | All as per item No 66 above but wiring with 2.5 sq mm single core copper conductor for one socket out let 15/16 amps point on the independent board complete all as specified and directed. |
| 76 | S&F switch piano flush type 5/6 amps single pole one way complete all as specified and directed. |
| 77 | S&F socket 2 in 1, 5 Pin, 5/6 amps, white ivory finish flash type complete all as specified and directed. |
| 78 | S&F of socket outlet 2 in 1, 5 Pin, 5/15 amp,multipurpose 230 volt flash type complete all as specified and as directed. |
| 79 | S&F switch piano flush type 15/16 amps single pole one way complete all as specified and directed. |
| 80 | S&FCeiling rose, surface type with back plate, three terminal /PVC/ polycarbonate, isolated body complete all as specified and directed. |
| 81 | S & F deluxe fan electronic regulator 230 volts AC 50 Hzs rotary step white/ivory finish complete all as specified and directed. |
| 82 | S&F, IP 20, class I, LED tube light fittings 20W (or nearest next higher wattage) (4feet), wall/ surface mounted, integrated type with aluminium housing and decorative and caps with integrated high efficiency electronic driver and surge suppressor of 2KV or more, luminaire efficiency > 95 lumens/watt, power factor > 0.90, operating range - 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/ square blocks, screws etc complete with all accessories internally prewired and connecting up with and including necessary taking down the old unserviceable fittingcomplete all as specified and as directed. |
| 83 | S & F LED street light fittings 35 Watt ,230 VAC outdoor type with high pressure die cast aluminium housing, heat resistant, toughned glass cover with IP66 protection complete all as spedified and as directed. |
| 84 | S&F Sheet metal enclosure for 8 way Distribution Boards (DB’s), double door, single pole & neutral with 200 amps rated bus bar, IP-20 protection suitable for fixing MCB\"S/lsolators completeincluding provision of blanking plates as required and taking down the old one complete all as specified and as directed. |
| 85 | S&F MCB, Single pole & neutral 6 to32 amps, 240 volts, ‘C’ curve, 10 KAall completeincluding taking down the old one complete all as specified and as directed. |
| 86 | S&F MCB, Single pole, 6 to32 amps, 240 volts, ‘C’ curve, 10 KAall completeincluding taking down the old one complete all as specified and as directed. |
| 87 | M &L for Earthing complete with GI earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25M deep below normal ground level) with top edge of the plate not less than 1.5m below normal GL. Connected to galvanized earth lead wire 4mm dia by means of nut, bolt, check nut and washersincluding necessary excavation and earth work in soft/loose soil, GI protection pipe light grade 15mm bore for protecting the GI wire mesh funnel alternate layer of charcoal dust, and saltPCC pit 1:3:6 type C1 using 20mm graded stone aggregate and 50mm thick RCC 1:2:4 type BO using 20mm graded stone aggregate cover re-inforced with 8 mm dia MS TMT bars 80mm C/C both ways complete all as specified and shown in Electrical plate No.3 SSR part-1 and connected to the earth point and testing complete including taking out the old one complete all as specified and as directed. |
| 88 | M&L for street light bracket made out of GI pipe light grade 32 MM dia 1.2 mtr length bent to shape and reduced to required size at top upto 1.2 mtr length by cutting, welding and well finishing including MS clamp of flat iron of size 25 x 5 mm suitable length 2 Nos complete with drilling hole, fixing with runts bolts and washers including painted with two coats aluminium paint over a coat of red oxide primer complete all as specified and as directed.. |
| 89 | M & L Sub main wiringconcealed type with two run single core cable PVC insulated cable with4.0Sqmm (Nominal area) multi stranded copper conductor FRLS cable 1100 volts gde incl earth continuity conductor using PVC insulatedcable of stranded copper conductor of size 4.0 Sqmm connected to common earth dolly anddrawing into rigidPVC conduitsof 25 mm dia medium gradesize,making good the disturbed surfacescomplete including taking down old submain wiring.(NOTE : Two run of submain wiring cable alongwith one run of earth wire and one run of PVC conduit shall be measured as one length complete all as specified and as directed.. . |
| 90 | Taking down ceiling fan sealing cable end, dismantling blades and removing fan and blades to storeand refixing the same after B/R work including provision of 3 core flexible copper wire of size 0.75 sqmm complete all as specified and as directed. |
| 91 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 2 core all fixing and connecting accessories such as cable lugs, cable glands, nut, bolts, complete all as specified and as directed. |
| 92 | Supply and laying for brick protection for protection of cable over sand cushioning cables inside the trench by using common brunt clay building bricks sub-class “B” old size brick and flat and width wise along the axis of the trenchcomplete all as specified and directed by Engr-in-Charge. |
| 93 | Supply and fixing 40 mm dia GI tubing medium grade ISI marked laid in trenches / laid under floor for protection of cable including all fittings such as elbow, bends, etc and short length complete all as specified and directed. |
| 94 | M&L for air termination, single pointed aluminium rod 12 mm dia and 300 mm long with necessary fixing arrangement on roof including taking down old one complete all as specified and as directed. |
| 95 | M&L for test point terminal block made of gun metal or phosphorus bronze size 75x75x25 mm, drilled and screwed copper/aluminium bi-metal strip including 3 Nos 8 mm dia 25 mm long hex head screw including taking down old one complete all as specified and directed. |
| 96 | M&L Aluminium 25 x 3.15 mm fixed on and including saddles and fixing screws etc. for roof conductors and down conductors complete all as specified and directed.. |
| 97 | S&F galvanised iron strip of size 32 x 6 mm buried in ground or fixed on wall mounted on suitable sized porcelaininsulators ( on floor and wall only) including cutting cavitiesfor fixing ofporcelain insulators and finishing with cement plasteron wall /floors and connected to test point including bending, jointing at test points with GI nuts, bolts, with lead washers, jointing strips at all joints incl. making good the disturbed surfaces including taking down old one complete all as specified and directed. |
| 98 | Fabrication and instalation of cubical shape enclosure made of MS/CRCA sheet 2.00mm thick with front detachable cover, anodixed fiexing screw cap, washers 4 Nos to be mounted on wall with wooden plugs & screws 4 Nos duly painted inside and outside by two coats of aluminium paints over a coat of redoxide primer overall dimension of enclosure 150mm x 150 mm x 100 mm (depth) for fixing inside test point terminal block including taking down the old one complete all as specified and directed. |
| 99 | Earthing complete with galvanised steel earth plate electrode60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less\"than 1.5 metres below normal ground level, connected to galvanised earth strip 32x6 mm dia by means of bolts, nuts, check nuts and washers of galvanised ironor steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion and including taking down the old one complete all as specified and directed. |
| 100 | S& F BLDC ceiling fan complete with deluxe electronic fan regulator stepped type, blades, down rods, and accessories ,230V, 1200 mm sweep.Min air delivery, 210 CFM, star rated complete all as specified and directed. |
| 101 | Material & labour for provisionof ceiling fan hooks made up of angle iron structure bent to shape and welding it to existing structure complete all as specified and directed. |
| 102 | S & F exhaust fan , steel body AC single phase, 230 V of size 300 mm sweep with blades and frames and louvers complete all as specified and directed. |
| 103 | M & L for through wall cutting suitable for size of exhaust fan to remove air from room, making good the disturbed surfaces of wallby providing cement plaster 1:4 and matching the surfaces by white wash/ color wash all as per existing finishes complete all as specifiedNote:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule \"A\"/BOQ. |
AI Tender Summary
Tender Timeline
Feb 12, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedMar 06, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 08, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender