Tender For Provision Of Modular Kitchen In Certain Omq, Provision Of Hard Standing And Provision Of Electric Chimney For Airmen Mess At Af Stn Salua Under Ge(Af) Kalaikunda
Tender Value
32 Lakhs
Estimated cost
Bid Submission
06 Mar 2024
0 days left
EMD
64000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
salua → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Provision Of Modular Kitchen In Certain Omq, Provision Of Hard Standing And Provision Of Electric Chimney For Airmen Mess At Af Stn Salua Under Ge(Af) Kalaikunda
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 28-Feb-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 06-Mar-2024 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons,dados etc laid, bedded and pointed in any mortar and removal of rubbish off the site complete all as specified & directed. |
| 2 | M & L for 20 mm thick machine cut granite tiles (any type) bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match with granite stone shade including 20 mm thick screed in cement mortar 1:4 including grinding and polishing complete all as specified and as directed. |
| 3 | Demolition ofreinforced cement Concrete of any description and in any position and removing of debris from premises and cleaning surfaces by brushing etc and washing down with water and removing dirt, dust etc completeall as specified and as directed. |
| 4 | Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and directed by Engineer in charge. |
| 5 | Surface excavation in hard/dense soil not exceeding 30cm deep and averaging 15cm deep and getting out complete including removal to distance exceeding 250m but not exceeding 1000mall as specified and directed. |
| 6 | M & L for cement concrete in foundation, filling and mass concrete in M15 (Nominal Mix) using 40 mm nominal size graded crushed stone aggregate complete all as specified and as directed. |
| 7 | Materials and Labour for, broken stone or boulder hardcore of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface , complete all as specified and directed. |
| 8 | Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M35 grade conforming to IS 15658-2006 made by block making machine with strong vibratory compaction, of approved size, design & shape, cast in rubber mould, glossy finish of approved colour, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. |
| 9 | Materials and Labour for Fly ash brick work with Sub Class ‘B’ bricks straight or curved on plan exceeding 6M mean radius built in cement mortar (1:6), complete all as specified and directed. |
| 10 | Materials and Labour for rendering 5mm thick, cement plaster, in cement mortar (1:4) mixed with water proofing compound as per manufactures instructions over and including 10mm thick backing coat in cement mortar (1:4) on fair faces of brick work or concrete surface finished even and smooth without using extracementin walls/spetic tank/manholes/soakage pits etc, complete all as specified and directed. Note: - (Water proofing compound inclusive in quoated rates) |
| 11 | Material and Labour for applying two coats of cement-based paint, white or tinted to new plastered surfaces on walls including priming with alkali resistant priming paint and including preparation of surfaces complete all as specified and directed. |
| 12 | S & Fsinks with drainage board made of stainless steel 1 mm thick sheet kitchen or laboratory with plugs, washers and 40 mm nominal size, copper alloy, nickel chromium plated finish waste fittings with including silicone sealant; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipes overall minimum size 940 mm X 460 mm bowel size 405 mm X 354 mm X 203 mm complete all as specified and as directed. |
| 13 | M&L for complete removal of existing treatment from ceiling, and applying two coats acrylic distemper on wall/ceiling,over and including1 mm thick white wall care putty premiumquality over and including a coat of primer to old plastered or unplastered surfaces on walls plastered or unplastered surfaces on walls complete all as specified and as directed.Make;Berger (Bison)/J&N(Jensolin)/Asain Piants(Tractor)/Nerolac(Beauty) |
| 14 | Taking up or down 15 mm bore of steel tubing and connections, including cleaning for refixing or removal to store complete all as specified. |
| 15 | Supplying & fixing towalls , ceiling and laid in trenches15 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed. |
| 16 | Supply and Fix in repair , bib tap, cast copper alloy, fancy type, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule,15 mm bore and fixed, complete all as specified and directed. |
| 17 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as directed. |
| 18 | Materials and Labour for, DigitalNon - skid Ceramic tiles, coloured, 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,conforming to IS 15622, Grade B II, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15 mm thick screed bed or bedding layer of cement mortar (1:4),complete all as specified and directed. |
| 19 | Materials and Labour for, Digital/ printed glazed ceramic coloured tiles, 350 X 250 X 7-8mmthick, conforming to IS 15622, Grade B III, on vertical surface of wall such as dados,skirting etc, set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick screed bed or bedding layer of cement mortar (1:4), complete all as specified and directed. |
| 20 | M & L for concealed point wiring one 3 Pin 5/6 Ampsocket outlet on independent boardwith and including single core PVC insulated, unsheathed flexible conductor (FRLSH)cables 1.5 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor drawn through & including medium mechanical stresses class PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20 mm nominal size including all accessories/ fittings/ junction / inspection cover etc. ISI marked andgalvanised metal boxes suitable for fixing with 1.5 sqmm copper conductor PVC insulated, unsheathed flexible multistranded copper conductor (FRLSH)cable as continuous earth wire connected to metallic body at one end and common earth dolly to other end complete all as specified and as directed. (Note: (i) The chases in the wall shall be cut with elect cutter andrates of the samewill deemed to be included in quoated rates (ii) The disturbed surfaces of wall shall be made good with cement plaster 1:4 including matching the surfaces with as per existing finishes and to the entire satisfaction of Engineer in Charge):- (iii)Wiring to be done as per approved colour code in IE rule. |
| 21 | M & L for concealed point wiring for light point/fan pointon independent boardwith and including single core PVC insulated, unsheathed flexible conductor (FRLSH)cables 1.5 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor drawn through & including medium mechanical stresses class PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20 mm nominal size including all accessories/ fittings/ junction / inspection cover etc. ISI marked andgalvanised metal boxes suitable for fixing with 1.5 sqmm copper conductor PVC insulated, unsheathed flexible multistranded copper conductor (FRLSH)cable as continuous earth wire connected to metallic body at one end and common earth dolly to other end complete all as specified and as directed. (Note: (i) The chases in the wall shall be cut with elect cutter andrates of the samewill deemed to be included in quoated rates (ii) The disturbed surfaces of wall shall be made good with cement plaster 1:4 including matching the surfaces with as per existing finishes and to the entire satisfaction of Engineer in Charge):- (iii)Wiring to be done as per approved colour code in IE rule. |
| 22 | All as per item no. 21.00 above here in beforebut point wiring with 2.5 Sqmm stranded PVCsheathed copper conductor for one 3 Pin 15/16 amps socket outlet on independent board including continuour earth wire with 2.5 Sqmm multi stranded PVC unsheathed copper conductor and connected to common earth dolly. |
| 23 | Supply and fix concealed sub main wiring complete with and including two Nos single core PVC insulated, unsheathed flexible conductor FR-LSH cables 4 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor drawn through and including medium mechanical stresses class PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20 mm nominal size including all accessories and fixed on walls and 4 sqmm one No single core copper conductor PVC insulated, unsheathed flexible multistranded copper conductor FR-LSH cable for earthing and connected to common earth dolly complete all as specified and directed by Engineer-in-charge. Note - Two runs of 4 sqmm cable, one run of 4 sqmm cable and one run of conduit will be measured and paid as one unit length. (Note: Cost of cutting chase and making good shall be deemed to inclusive quoated rates .) |
| 24 | S&F Modular metal flush box 3 module including make good to match with existingsurface complete all as specified and directed by EIC. |
| 25 | S&F Modular metal flush box 2 module including make good to match with existingsurface complete all as specified and directed by EIC. |
| 26 | S&F Modular metal flush box 8 module including make good to match with existingsurface complete all as specified and directed by EIC. |
| 27 | S&F Modular white cover plate with frame 2 module including make good to match with existingsurface complete all as specified and directed by EIC. |
| 28 | S&F Modular white cover plate with frame 3 module including make good to match with existingsurface complete all as specified and directed by EIC. |
| 29 | S&F Modular white cover plate with frame 8 module including make good to match with existingsurface complete all as specified and directed by EIC. |
| 30 | Supply & fixing Modular switch 1 way 6A, 1 module complete all as specified and directed. |
| 31 | Supply & fixing Modular switch 1 way 16A, 1 module complete all as specified and directed. |
| 32 | Supply & fixing modular socket 6A-2/3 pin combined 2 module, complete all as specified and as directed. |
| 33 | Supply & fixing modular socket 6A/16A-2/3 pin combined 2 module, complete all as specified and as directed. |
| 34 | S & F ceiling roses, 6A, 240 V, surface type, intended to support mechanical loads by means of flexible cord, having provision for the connection of switch wiring, screw type terminal, made out of Polyamide or hornbean complete all as specified and as directed. |
| 35 | S&Fin repair LED 20 Watt tube light fitting intergated type, LED of Make Osram; Everlight; Philips; Nicha; Cree; Samsung, LED wattage of minimum 3 watt each and Maximum 5 watt each, operational voltage of 170 volts to 270 volts, frequency of 50 Hz, , lumen efficacy of minimum 120 lumens per watt, , integrated electronic driver (SMP based constant current supply) with output short circuit protection and surge protection upto 2.5 KV, protection grade IP 20, CRI greater than 80%, bema angle of 120 clear, ATHD below or less than 20%, CW available CCT of 6500K, power factor of minimum 0.95 housing with aluminium, life span of minimum 50000 working hourscompletesuitable for surface mounting on wall,complete fittingincluding connecting with PVC insulated multistranded copper flexible cable 1.5 sqmm three core, and PVC round block white colour x 2 Nos for mounting of fitting complete all as specified & directed. Make :- Wipro/Philips/ or ADG approved make in group I as approved by GE |
| 36 | S & F modular detergent pull outminiumum size200x485x430mm madeofstainless steelas per approved manufacturer,sspecification premium quality including all fittings complete all as specified and as directed.MakeGodrej /hitech/kutchina Kitchen appliances or other equivalent make as approved by GE. |
| 37 | S & Fmodular thali-plate basket made ss stainless steel(SS-304),miniumum sizeof 520x485x100mm,as per approved manufacturer,sspecification premium quality including all fittings complete all as specified and as directed.MakeGodrej /hitech/kutchina Kitchen appliances or other equivalent make as approved by GE.. |
| 38 | S & Fmodular perforated cutlery basket made ofstainless steel(SS-304) miniumum size size of 520x485x100mm,as per approved manufacturer,sspecification premium quality including all fittings complete all as specified and as directed.MakeGodrej /hitech/kutchina Kitchen appliances or other equivalent make as approved by GE.. |
| 39 | S & F dish rack made ss stainless steel(SS-304) ,miniumum size of 570x280mm as per approved manufacturer,sspecification premium quality including all fittings complete all as specified and as directed.MakeGodrej /hitech/kutchina Kitchen appliances or other equivalent make as approved by GE.. |
| 40 | S & F inauto closing waste binmadestainless steel madeofstainless steel (SS-304)as per approved manufacturer,sspecification premium quality including all fittings complete all as specified and as directed.MakeGodrej /Hitech/kutchina Kitchen appliances or other equivalent make as approved by GE.. |
| 41 | S & F in bottle pull out madestainless steel (SS-304) Miniumum size100x485x430mm as per approved manufacturer,sspecification premium quality including all fittings complete all as specified and as directed.MakeGodrej /Hitech/kutchina Kitchen appliances or other equivalent make as approved by GE.. |
| 42 | S & F in plain basketmadestainless steel (SS-304), Miniumum size of 520x485x100mm as per approved manufacturer,sspecification premium quality including all fittings complete all as specified and as directed.MakeGodrej /Hitech/kutchina Kitchen appliances or other equivalent make as approved by GE.. |
| 43 | S & F of 18mm MDF on both side laminated (prelam sheet)for Shutter base/wallkitchen cabinets/Cupboards etc. as per approved manufacturer,sspecification premium quality including all fittings complete all as specified and as directed.MakeGodrej /Hitech/kutchina Kitchen appliances or other equivalent make as approved by GE.. |
| 44 | S & F of 18mm MDF on both side laminated (prelam sheet) for Shelves White in kitchen cabinets/Cupboards etc. as per approved manufacturer,sspecification premium quality including all fittings complete all as specified and as directed.MakeGodrej /Hitech/kutchina Kitchen appliances or other equivalent make as approved by GE.. |
| 45 | S & F of 18mm BWR Ply on both side laminated (prelam sheet)for Frame in kitchen cabinets/Cupboards etc. as per approved manufacturer,sspecification premium quality including all fittings complete all as specified and as directed.MakeGodrej /Hitech/kutchina Kitchen appliances or other equivalent make as approved by GE.. |
| 46 | S & F of 18mm MDF onboth side laminated(prelam sheet) for Framing partitionin kitchen cabinets/Cupboards etc. as per approved manufacturer,sspecification premium quality including all fittings complete all as specified and as directed.MakeGodrej /Hitech/kutchina Kitchen appliances or other equivalent make as approved by GE.. |
| 47 | S & F of 18mm MDF on both side laminated(prelam sheet) for Back and Base in kitchen cabinets/Cupboards etc. as per approved manufacturer,sspecification premium quality including all fittings complete all as specified and as directed.MakeGodrej /Hitech/kutchina Kitchen appliances or other equivalent make as approved by GE.. |
| 48 | S & F in 18mm BWP ply on both side laminated (prelam sheet) WallMinimum size 700x600x300 for microwavecabinetas per approved manufacturer,sspecification premium quality including all fittings complete all as specified and as directed.MakeGodrej /Hitech/kutchina Kitchen appliances or other equivalent make as approved by GE.. |
| 49 | S & F in 18mm BWP ply on both side laminated in Wall cabinetMinimum size 700x700x300 , as per approved manufacturer,sspecification premium quality including all fittings complete all as specified and as directed.MakeGodrej /Hitech/kutchina Kitchen appliances or other equivalent make as approved by GE.. |
| 50 | S & F in 18mm BWP ply on both side laminated in Wall cabinetMiniumum size 700x600x300as per approved manufacturer,sspecification premium quality including all fittings complete all as specified and as directed.MakeGodrej /Hitech/kutchina Kitchen appliances or other equivalent make as approved by GE.. |
| 51 | S & F in 18mm BWP ply on both side laminated in Wall cabinetsize Minimum 700x300x300 ,as per approved manufacturer,sspecification premium quality including all fittings complete all as specified and as directed.MakeGodrej /Hitech/kutchina Kitchen appliances or other equivalent make as approved by GE.. |
| 52 | S & F in 18mm BWP ply on both side laminated in Wall cabinetsize Minimum 700x400x300 ,as per approved manufacturer,sspecification premium quality including all fittings complete all as specified and as directed.MakeGodrej /Hitech/kutchina Kitchen appliances or other equivalent make as approved by GE.. |
| 53 | S & F in 0 degreestainless steel kutchina/Hafele intermate hinge in kitchen cupboard as per approved manufacturer,sspecification premium quality including all fittings complete all as specified and as directed.MakeGodrej /Hitech/kutchina Kitchen appliances or other equivalent make as approved by GE.. |
| 54 | S & F in 6\" Economic Handlestainless steel kutchina/Hafelefor kitchen cupboard ,as per approved manufacturer,sspecification premium quality including all fittings complete all as specified and as directed.MakeGodrej /Hitech/kutchina Kitchen appliances or other equivalent make as approved by GE.. |
| 55 | S & F inshelves support kutchina for kitchen shelves ,as per approved manufacturer,sspecification premium quality including all fittings complete all as specified and as directed.MakeGodrej /Hitech/kutchina Kitchen appliances or other equivalent make as approved by GE.. |
| 56 | S & F inL-clipkutchina for kitchen shelves ,as per approved manufacturer,sspecification premium quality including all fittings complete all as specified and as directed.MakeGodrej /Hitech/kutchina Kitchen appliances or other equivalent make as approved by GE.. |
| 57 | S & F in multitech railing set (heavy duty) for kitchen,as per approved manufacturer,sspecification premium quality including all fittings complete all as specified and as directed.MakeGodrej /Hitech/kutchina Kitchen appliances or other equivalent make as approved by GE.. |
| 58 | S & F in multitech set(heavy duty) for kitchen,as per approved manufacturer,sspecification premium quality including all fittings complete all as specified and as directed..MakeGodrej /Hitech/kutchina Kitchen appliances or other equivalent make as approved by GE.. |
| 59 | S & F in MS fiber finish stay,as per approved manufacturer,sspecification premium quality including all fittings complete all as specified and as directed. |
| 60 | Supply, installating, commisioning and testing of commericial kitchen chimney comprising of the following(i) 5 feet long exhaust hood regular type, made out of 0.8 mm thick SS (202 grade) sheet.(ii) GI ducting (24 SWG) 9 feet long.(iii) Axial flow exhaustfan, 2P 1.5 KW, 1440 RPM, heavy guage SS casing having robust construction, flanges at both end, die cast aluminium impleller having aerofoil design with adjustable pitch angle confirming to IS - 3588 with and including all connected accessories and fitting fixtures for making full functional including civil work complete all as per specified and as directed. |
| 61 | Supply, Fixing and installation of wall mounted Electric Kitchen Chimney of Minimum size 75 cm, compact design suction Minimum 1400m3/hr Auto clean type touch control with wave sensor duct dia 150mm including free Kit for installation with duct cover of adequate size ,including fittiting ,fixture and necessary work as per approved manufacturer,sspecification premium quality including all fittings complete all as specified and as directed.MakeGodrej /Hitech/kutchina Kitchen appliances or other equivalent make as approved by GE.. |
AI Tender Summary
Tender Timeline
Feb 28, 2024
11:30 IST
Tender Published
Tender notice published.
Completed
Mar 06, 2024
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedMar 06, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 07, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender