Military Engineer Services-MES has published Tender For Repair To External / Internal Surfaces Of Bldgs, Including Windows, Doors, Flooring Etc Repair Replacement Of Roof Treatment And Repairs To Rolling Shutters, Hard Standing To Mes Installation At Powai And Ulhasnagar Under Ge(Nw) Bhandup. Submission Date for this Tender is 11-03-2024. Door Tenders in powai Maharashtra. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 04-Mar-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 11-03-2024 |
| Sl. No. | Item Description |
| 1 | Demolition of concrete in ground floors (un re-inforced) and paving n.exc. 15 cm thickness (below or above ground level) and removal of rubbish/ demolished materials out of MD landcomplete all as specified and directed. |
| 2 | M&L providing cement concrete type B0, 1:2:4 (12.5mm graded aggregate) 30mm thick as in flooring complete all as specified and directed. |
| 3 | Dismantling floor, hearth or wall tiling including cementmortar beddingremoving serviceable tiles and rubbish off the premises etcand removal of rubbish/ demolished materials out of MD landcomplete all as specified and directed. |
| 4 | M&L for Non-skidceramic tiles (Coloured) Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 5 | M&L for glazed ceramic coloured tiles 300x200mmx7mm thick in vertical surfaces such as skirting/dado and risers to steps and including over 10mm thick rendering in CM 1:4 on fair faces of brick/concrete surfaces as in backing coat for tiles. etc, all as specified and directed. |
| 6 | M&L for Non-skidceramic tiles (Coloured) 7 to 8mm thick rectangular area of each tiles exc 0.18 sqm n exc 0.36 sqmin floorsetc,.set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 15mm thick screed bed in CM 1:6 laying floor finished complete all as specified and directed. |
| 7 | M&L for Non-skidceramic tiles (Coloured) 7 to 8mm thick rectangular area of each tiles exc 0.18 sqm n exc 0.36 sqmin vertical surfaces such as skirtings, dados etc,.set and jointed in neat cement slurry and pointed in white or coloured cement to match including over 10mm thick rendering in CM 1:4 on fair faces of brick/concrete surfaces as in backing coat for tiles.complete all as specified and directed. |
| 8 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed. |
| 9 | M & L for 20 to 25 mm thick machine cutkota stone slab of size 590mm x 590mm in flooring, laid over and including 20 mm thick screed bed in CM 1:4, set and jointed and pointed in neat cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing etc completeall as directed and specified. |
| 10 | M&L for 20-25mm thick machine cut and pre polished Kota stone slab in single piece as in skirting, dado,pillars, risers and treads of steps (including making 3 grooves on the Kota Stone of treads), skirting & dado, Jambs, Cills, Plateform etc over and including 15 mm thick cement mortar screedbed in CM 1:4, jointed and pointed with cement slurry mixed with pigment to match the shade of the slab, complete as specified and directed. |
| 11 | M&L for providing 75mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in plinth protection, surface finished even & smooth without using extra cement complete all as specified and directed. |
| 12 | Dismantling Asbestos cement/galvatume aluminium zinc ( corrugated semicorrugated, etc) sheets in roof coverings etc complete all as specified and directed. |
| 13 | S&F pre painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof covering/clading to wall/Chajjas upto 4 story bldg, fixed with self taping screws complete all as specified and directed. |
| 14 | S&FPre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed by Engr-in-charge. |
| 15 | S & F Steel work in joist,channel,angle,or teesections, fixed independently, without connecting plates, etc.including tubular poles/purlin/rafterspecial shaped washer etc. complete using Fe 410-W(Gde-E-250 quality-A) work upto 4 story bldg complete as specified and directed. |
| 16 | S & F in repairs Steel rolling shutters, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type thk of laths 1.25mm all as specified and directed. |
| 17 | M&L for preparation for two coats of synthetic enamel paint over onnew steel /iron surfaces over one coat of red oxide primer complete all as specified. |
| 18 | Taking down chowkat or frame with shutter (without taking off shutter from the frames) not exceeding 1.5 Sqm each complete as specified and directed. |
| 19 | Taking down chowkat or frame with shutter (without taking off shutter from the frames), exc 1.50 sqm but not exc 4.0 sqmeach complete as directed |
| 20 | Taking down shutters of any description,exc 1 Sqm and n.exc 2 sqm eachcomplete all as specified and directed |
| 21 | Taking down and refixing in the same opening shutters of any description exceeding 1 Sq.m but not exceeding 2 Sq.m each complete all as specified and directed. |
| 22 | M&L for IInd class Hard wood (Sal) plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered,put together with glue, pinned at joint complete all as specified and directed. |
| 23 | S & F,IInd class hardwood 35mm thick Plain, framed,panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed. |
| 24 | S & F 2nd class hardwood, glazed and skelton shutter, 35mm thick, open rebated and prepared to receive glass, gauze etc,divided into square with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plane, chamfered or rounded, fitted with cut and mitered bead for securing glass, gauze etc, size of member of shutters as specified in SSR Part -I, section 8, class 8.24(a) (Door shutter), supplied and fitted to chowkats all as specified and directed. |
| 25 | M&L , in repairs, IInd class Hard wood plain fillets squares, rectangular or triangular in section, wrought, secured with screws, sectional area exc 13 Sqcm and not exc 25 Sqcm complete all as specified and directed. |
| 26 | M&L for 19mm thick block boards, grade - I quality, exterior grade, decorative type with decorative face veneer on both sideswith external teak wood lipping, 6mm thick alround fixed with screws to timber frame workfor cuboard self or shutters etc, complete all as specified and directed.. |
| 27 | S&F for Solid PVC door frame of size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per spcification & drawing etc, complete all as specified and as directed. |
| 28 | S&F for Factory made solid PVC Moulded door shutter , 28 to 30 mm thick (stiles), with 2,4 or 6 raised panel design with 2mm th. Moulded PVC sheet on the front face & 2mmplain coour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing with wood free EPS etc, complete all as specified and as directed. |
| 29 | M&L for 20 to 25mm thick machine cut and machine polished cudappa stone slab for kitchen plateform jointed and set in CM 1:3 and fixed including rounding to edge of stone slabs one side edgeetc complete all as specified and as directed |
| 30 | M&L for 18-20mm thick granite(of any type) work table rubbed and polished asinjambs, pillars, door and windows-cill, cooking platform , jambs, wash basin platform and the like in cement mortar (1:4) including pointing in white / coloured cement (1:2) using marble dust with admixture of pigment tomatch with shade of granite including cutting of oval shape for fixing of counter wash hand basin etcover and including 10mm thick rendering / screed in CM 1:4 on fair faces of brick/concrete surfaces complete all as specified and directed. |
| 31 | S&F standard aluminum section powder coated in partition / frame and door shutter, sliding windows / ventilators and places otherwise not specified cut to size, jointed with cadmium plated steel screws, including rubber beading or gaskets for fixing glass or wire cloth or Bakelite sheet and all necessary fittings, hinges, screws, plugs, locking arrangements for windows, Nylon ball bearing etc completed all as specified and directed (Aluminum section shall be of make Jindal / Hindalco / Indalco). Note :- Weight of Aluminum sections for frames and shutters shall be only considered for payment.Cost of other consumables required for the item shall be deemed to be included in the quoted rate.However glass panes / Bakelite sheet / wire cloth / mortice lock / locking stay / floor spring / floor door stopper only will be measured and paid separately under respective items as supply only.Fixing by element of these items shall be deemed to be included in quoted rate. |
| 32 | S&Faluminum anodised grill DG- 202 ( 10 mm x 5.2mm ) of approved make fixed with "F" section size not less than 20.60 x 15.20 x 1.5mm thick of approved make all as specified and directed. Note : (i)Make shall be as approved by the GE. (ii) Minimum thickness of anodizing shall be 15 microns. |
| 33 | Supply only 4mm thick sheet figured glass, pin head type and glazing with oil putty in square not exceeding 0.5 Sqm in each pane etccomplete all as specified and directed |
| 34 | Supply only 4.80mm thick glass ordinary quality plainnot exc 0.5 Sqm each pane withincluding wooden/rubber beading or gasket for aluminium sectioncomplete all as specified and directed. |
| 35 | Supply only 4.80 mm thickglass ordinary quality in plain exc 0.50 Sqm each paneincluding rubber beading or gasket for aluminium sectioncomplete all as specified and directed. |
| 36 | Supply only for 6mm thick bakelite sheet prelaminated both side with decorative choice laminations for aluminium frame work withincluding rubber beading or gasket for aluminium sectioncomplete all as specified and directed. |
| 37 | Supply only stainless steel wire cloth of 0.36 mm nominal dia of wire and average width of aperture 1.40 mm , fixed in aluminium windows complete all as specified and directed. |
| 38 | S&F bands, straps supports or stay heavy for large gates, hook and pintle hinges clamps, hold fasts, wall tiles, hooks for hanging fans and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 39 | M&L for providing cement concrete type C1, 1:3:6, using 20mm graded stone aggregate as in bed block for hold fast, coping etc including necessary form work complete all as specified and directed. |
| 40 | Hacking out old brocken glass (any thickness, size, quality or description) from wooden / steel frame or stone, concrete or brick surrounding, glazed with putty or fixed with beads complete all as specified and directed. |
| 41 | S&F for 4.0mm thick sheet glass ordinary quality and glazing with oil putty in steel windows and teak wood beading in wooden shutters square not exc 0.5 Sqm in each pane complete all as specified and directed. |
| 42 | All as per item No.41 above but for 4.0mm thick figured glass pin headed type complete all as specified and directed. |
| 43 | S & F in repairs floor door stopper of aluminium alloy bodyand tongue, anodised with hard drawn steel spring of length 140mm fixed in flooretc complete all as specified and directed. |
| 44 | S &F, in repairs, aluminium alloy wire cloth,0.45 mm nominal dia ofwire and average width ofaperture 1.40mm and fixed with in wooden windows, doors etc,and fixing of teak wooden beedingcomplete all as specified and as directed by the Engineer in charge. |
| 45 | S&F in repair stainless steel heavy duty continuous piano hinges for cupboar/cabinet etc complete all as specified and directed by Engineer-in-Charge. |
| 46 | Supply and fix aluminium alloy anodised sliding door bolt with hasp and staple(bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolt of extruded section of size 250 mm fixed at any position all as specified and directed. |
| 47 | S&F in stainless steel butt hinges, 100mm,medium weight complete all as specified and directed |
| 48 | S&F in repairextruded aluminium alloy handles, fabricated type of size 150mm in any position complete all as specified and directed. |
| 49 | S&F in repair aluminium, anodised, barrel tower bolts of extruded section of size 150mm complete all as specified and directed. |
| 50 | S&F in repair 0.45mm thickPlain aluminium sheeting , alloy 31000 H4 in stepped flashing (measured as the minimum rectangle from which the pieces can be cut)bottom of panelled shutter complete all as spd and directed. |
| 51 | S&F for600 x 450mm looking mirror of selected qualitywith chromium plated brass screws and cup washers etc complete all as specified & directed. |
| 52 | S&F in repair for 20mm dia fancy type chromium platedcurtain rods with fixing fancy brackets,brass screws etc complete all as specified and directed |
| 53 | S&Fin repair wash down water closet (pedestal pattern) white and including plastic water closet seat cover as per reqd colour with flat bottom and cover and mild steel chromium plated or aluminium hinging device (excludingflushing cistern ) etc complete all as specified and directed.. |
| 54 | S&F in repairs vitreous china squatting pan, white, orissa pattern pan of size 580 mm x 440 mm of standard quality with integral foot rests,and including "P" trap or "S" Trapcomplete including connection to trap and to flushing pipe, anti syphonic pipe etc., complete all as specifiedand directed. |
| 55 | S&F in repairs wash hand basin, vitreous china white of size 550x 400mm excluding taps, waste chain and plug and porcelain stopper but including brackets,32mm waste fitting and waste pipe of 32 mm bore, brass, chromium plated for glazed ware wash basin and 15mm dia pillar tapschromium plated fancy type etc complete all as specified and directed. |
| 56 | Supply and fix in repair 10 ltr, PVC, valveless, syphonic action type, flushing cistern, low level/ high level including inlet, ball valve, float and handle including brackets with and including PVC flush pipe 32 mm bore, connecting to WC etc, complete all as specified and directed. |
| 57 | S&F in repair for CP concealed stop cock 15mm borefancy type chromium plated.with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 58 | S&F in repairs CP angle cock 15mm bore fancy type chromium plated.with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 59 | S&F in repairs CP bib tap 15mm bore fancy type with crutch or butterfly handle, screwedfor iron pipe or for unions and fixed complete all as specified and directed. |
| 60 | S&F in repair CP pillar taps15mm bore., cast copper alloy, chromium plated fancy type complete all as specified and directed. |
| 61 | S&F in repair 15 mm boreStop valves, cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed complete all as specified and directed. |
| 62 | S&F in repairstainless steel grating in ground shape 100mm dia complete all as specified and directed. |
| 63 | All as per above item No.62 above but with hole complete all as specified and directed. |
| 64 | S&Fin repairplastic water closet seat cover as per reqd colour with flat bottom and cover and mild steel chromium plated or aluminium hinging deviceetc complete all as specified and directed.. |
| 65 | S&Fstainles steel sink with drainage board ,1 mm thick sheet of steel grade AISI 304 for kitchen or laboratory, with plug, waste pipe, washers including CI cantilever bracket, connecting union etc., overall size 915 x 460 mm with bowl size 410 mm x 330 mm x 160 mm including supply and fixing bib tap CP with long body screwed for iron pipe complete all as specified and directed. |
| 66 | S&F in repair low density polyethene pipes (LDPE) 32mm of pressure rating 6 Kg/cm2 fixed to walls or laid in floors etc.complete all as specified and directed. |
| 67 | S&F in repairs chromium plated shower roses 125mm size with or without swivel joint including fixing to steel pipe or union etc.complete all as specified and directed. |
| 68 | S&F in repair soap dish complete all as specified and directed. |
| 69 | S&F in repair Toilet paper holder complete all as specified and directed. |
| 70 | S&F in repair Health faucet with 1 mtr tube & hookcomplete all as specified and directed. |
| 71 | S&F in repair CP corner glass with brass bracket screws etc complete all as specified and directed. |
| 72 | S&F in repair CP glass shelf of size 450x150mm with grill and brass bracket screws etc complete all as specified and directed. |
| 73 | Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 15mm complete all as specified and directed. |
| 74 | Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 20mm complete all as specified and directed. |
| 75 | S&F 15mm bore U- PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc. with all fittings completed all as specifiec and directed. |
| 76 | All as per item No 75 above but 20 mm bore. |
| 77 | Demolition of brick work or stone boulder masonry,built in cement mortar or cement lime mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stone work and precast concrete articles.complete all as specifed and directed |
| 78 | M&L for brick work with sub class B old size bricks and of class designation 35 (Minimum compressive strength 35 Kg/Sqcm) , straight or curved on plan exc. 6metre mean radius, built in cement mortar 1:6, complete all as specified and directed. |
| 79 | Taking down cement or cement lime plaster of any description on brick or stone wall surface including raking out joints,hacking for key,scrubbing down with water and removing debris outside MD land etc complete all as specified and directed. |
| 80 | M & L for rendering 10 mm thick in CM 1:6 on brick walls or concrete surfaces in patches and finishing the surface even and smooth without using extra cement complete all as specified and directed. |
| 81 | M&L for rendering 5 mm thick in CM 1:3 as in ceiling in patches finishing even and fair etc complete all as specified and directed by EIC. |
| 82 | M/L for 15mm thick renderingin CM 1:4 on surface of wall in patches mixed with water proofing compound and shall be scored to provide key for rough finishing coat. including necessary scaffoldings etc complete all as specifiedand directed Note:- WPC shall be measured and paid seperately. |
| 83 | Supply only integral water proofing compound. |
| 84 | M&L chipping, removing carefully concrete surface by low impact hamer/bracker without damaging the structure incl preparation of old surfaces of reinforcement bars as per manufacturer"s instruction and disposal of debris out side MOD land and applying anticorrosive protective coating for steel reinforcement surfaces andallpying epoxy bond coat of approved make as approved by GE over exposed concrete surfaces prior to application of any type of mortar to ensure bond between old concrete& new mortar, by brush application and building up the profile of structural members by using polymer modified mortar(Molith-PMM) ORPolymer mortar upto 20mm thickness including levelling, profiling etc complete all as specified and directed. |
| 85 | M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over coat of alkali resistant primer with roller etc complete all as specified and directed. |
| 86 | M & L for preparation of old decorated surfaces of wall by brooming down or steel wire brushing scrapping down smoke, soot ,moulds, moss and efflorecent salts and treating oil and gresy spots and thereafter applying one coat of oil bound distemper with roller complete all as specified and directed |
| 87 | M&L for for preparation of newplastered surfaces on walls, chajjas and applying two coats of 100% anti fungal weather resistant acrylic paint over a coat ofacrylic primer in approved shade and as per manufactur"s instructions complete all as specified and as directed. |
| 88 | M&L for preparation of old surfaces of walls/ceiling including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots, washing down with water, filling of cracks with Dr fixit crack filler or equivalent make and applying one coat of 100% antifungal weather resistant acrylic paint of approved shade over a coat of acrylic primer including necessary scaffolding work etc complete all as specified and directed. |
| 89 | M & L for preparation of new plastered surfaces of ceiling, priming with one coat of alkali resistant primer and thereafter applying two coats of oil bound distemper with roller complete all as specified and directed |
| 90 | M & L for preparation of old decorated surfaces of ceilingby brooming down or steel wire brushing scrapping down smoke, soot ,moulds, moss and efflorecent salts and treating oil and gresy spots and thereafter applying one coat of oil bound distemper with roller complete all as specified and directed |
| 91 | S & F in repairs Anodised alluminium snap grid frame work size 605x605mm for false ceilingall as specified. |
| 92 | M & L in repairs for 12 mm thick perforated particle board / tiles for insulation and acoustic purposes, 60 x 60 cm in size, fixed with screws to timber frame work or with staples on snap gridin ceilings, flat or sloping complete all as specified and directed. |
| 93 | M & L for applying two coats of synthetic enamel paint over a coat of pink primer including preparation of new wooden surface of any discription not otherwise discribed over 10 cm width or girth, complete all as specified and directed. |
| 94 | M & L for anti termite treatment providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc complete all as specified and directed by Engr-in-Charge. |
| 95 | M & L for anti termite treatmenttreatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed |
| 96 | M & L for anti termite treatment of voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and directed |
| 97 | M & L for anti termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed. |
| 98 | Dismantling of roof terracing cement / brickconcrete (un-reinforced) and existing water proofing treatment of any thickness in any position and of any portion from top of roof of building, cleaning surface of roof with wire brush / mechanical brush and with water thoroughly to remove all dust / dirt and loose particles to expose base concrete roof slab and removal of rubbish / demolished material out of MD land complete all as specified. |
| 99 | M&L for PCC 1:2:4 Type B0 using 12.5 mm graded aggregate with 2% by weight of cement or as per manufacturer"s instructionswater proofingas in levelling course, haunching, coping and similar works over RCC roof surface and RCC over head tank top surface including rounded or chamferred on edges and formwork etc all as specified and directed. Note: Water proofing compound will be measured & paid seperately. |
| 100 | M&L for10 mm thick cement plaster in CM (1:3) using water proofing compound @ 3% by weight of cementcomplete all as specified and directed BY Engr-in-charge ( Note : water proofing compound will be measured and paid seperately) |
| 101 | Supply and Application of 7 Layer SHR Waterproofing Coating System as per manufacturer application procedure on leaking concrete roof surface by thorough surface preparation with high pressure water jet min. 125 bars, opening the cracks, followed by one absorption coat of nano-tech enhanced elastomeric waterproofing (NEEWP) emulsion having UV resistance and min. 50% solids, filling and sealing the cracks, then over-coating with sandwich coat of NEEWP + Cement mixture as waterproofing layer with 80 GSM non-woven fibre mesh, application of 3rd coat of NEEWP + Cement mixture elastomeric waterproofing layer having +450% Elongation. The surface is then to be tested for water tightness with ponding/ flooring test for min. 3 days and then top-coated with 2 Coats of SHR Coating - pure acrylic based, UV resistant, non-yellowing, bio-organism resistant (anti-fungal, anti-bacterial) conforming to BIS STD IS 17218:2019 with Pull off Adhesion 2.8 Mpa, passes 2000 hrs accelerated durability test, suitable for all types of cementitious surfaces, white colour, matt, surface coverage 3.25 SQM/Ltr/2 Coats, DFT 100 - 120 microns using brush, roller, airless spray gun as applicable. The product should be certified by NABL Approved Lab and application is to be done by company approved applicator only" |
| 102 | M& L 75 mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base floor / pavings complete all as specified and directed |
| 103 | M&LSand filling under floors or in foundationincluding watering and consolidation complete all as spd |
| 104 | M&L forMachine pressed (LAQUER FINISH)cement concrete factory made coloured glazed interlocking paver block any shape and size confirming to IS 15658 -2006 of60mm thickness, M-35 Grade,machine pressed of pattern and colour as approved by GE complete all as specified and directed. |
| 105 | M&L forMachine pressed (LAQUER FINISH) cement concrete factory made coloured glazed interlocking paver block any shape and size confirming to IS 15658 -2006 of 80 mm thickness, M-40 Grade,machine pressed of pattern and colour as approved by GE complete all as specified and directed. |
| 106 | M & L 25 mm thick PCC 1:2:4type B0, using 12.5mm graded aggregate as in floors toreceive surface of tile complete all as specified and directed. |
| 107 | M&L screed bed or bedding layer of mortar, 20 mm thick, in cement mortar 1:6, for laying floor finishes/tiles complete all as specified and directed. |
| 108 | M&L for coloured glazed glossy finished chequered liquid finish cement concrete30cm x 30cm x 25cm thick With mixture of grey and white cement in equal proportions and no pigment set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles complete all as specified and directed. |
| 109 | Deduct Credit for Demolished/ Dismantled material Rs. (-) 24100.00 (Minus) as listed in Schedule of CreditNote1: Tenderers will not quote against this item being a tentative amount to be considered to arrive at the "Contract Sum" Note 2:- The tenderer must keep in mind when quoting rates against items out in multiple store house having height 4 mts to 7 mts. Necessary scaffolding and saftey measures required during execution of work are including in this items. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
