Public Works Department-PWD has published Tender For Beautification Of Town By Way Of Erection Of Informatory Sign Boards. Submission Date for this Tender is 19-02-2024. Signage Tenders in pulwama Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Manufacturing supplying and fixing retro reflective sign boars made up of 2 mm thick aluminiumsheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting comforming to type IV of ASTM-D -4956-01 in blue and siliver white or other colour combination including subject matter, message( Bilingual), symbols and borders etc. as per IRC:67-2001, pasted on substrate by an adhesive backingwhich shall be activated by applying heat and pressure conforming to class-2 if ASTM-D-4956-01 and fixing of the same with suitable sized aluminium alloy rivets @ 20cm C/C to back support frame of stainless steel 50 mm Dia 3mm thick along with the theft resistant measures mounted and fixedwith 1 Nos stainless steel 50 mm dia x 3mmvertical postwith base plate of size 100x100 x5 mm at the bottom end and including making holes in pipes, fixing in position cement concrete 1:2:4 mixof size 1.5"x1.5"x2" including all as per drawing, specification and direction of EIC. |
| 2 | Providing & fixing raised pavement marker (Solar Cat Eye I Road Stud) Complying ASTM 04280 made of high streth engineering plastic body having at list 13653 Kgs. Load Bearing capacity in accordance with ASTM D 4280. The Reflective raised pavement markers shall also confirm to the MORTH circular No. RW/NH./ 33023110197-DO.III and Length | Width of the marker should be not be more than 130 mm and height should not be more than 20 mm, having shape so that no water penetration or dust occum ulation takes place on reflective Surface, fitted with electronically welded tough polycarbonate micro prismatic reflective panels having not less than 13 Sq. Cmt. surface area of each side having long distance visibility at night and in wet weather condition. The slope or retro reflectory Surface shall be 35+5 degree to base. Each retlectore shall haw a GL nit less values specified in Table of MORTH circular dated 11.6.97 respectively. The body of the marker should havi finger grip for easy and accurate Placement and application with epoxy /bituminous Adhesive as recommended by the manufacture of the marker. The colour of the marker should be as per the IRC 34- 2015 and as directed by Engineer in Charges |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
