Department Of Agriculture-DOA has published Setting Up Of New Agri Development Research Cum Training Centre With It Facilities At Kadamtala Under Kadamtala Agri Subdivision / S.H.:- Installation Of Mini Deep Tube Well Of150 X 100 Mm Size With Submersible Pump Set Having Capacity 2000Gph At 40.00 Mt. Submission Date for this Tender is 17-02-2024. Submersible Pump Tenders in kadamtala Tripura. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Drilling and boring pilot hole in any soil strata by mini drilling rig, collection of soil samples of different strata met with during drilling at various suitable levels, preservation of samples in polythene bags / sample boxes and disposal of excess soil or mud, including the cost for bentonite, water etc. as required to maintain the pilot hole properly as per specification ( IS : 2800 (part-I)) and direction of the Engineer - in - charge. A. with contractor"s mini rig i. 150 mm dia |
| 2 | Reaming of pilot hole to an enlarged bore hole in any soil strata by mini drilling rig, disposal of excess soil or mud, including the cost for bentonite, water etc. as required to maintain the bore hole properly as per specification ( IS : 2800 (part-I)) and direction of the Engineer - in - charge. A. with contractor"s mini rig i. from 150 mm dia pilot hole to 350 mm bore hole |
| 3 | Washing of enlarged bore hole of 350 - 550 mm dia in any soil strata by mini drilling rig, disposal of excess soil or mud, including the cost for bentonite, water etc. as required to maintain the bore hole properly, including lifting of drill pipes as per specification ( IS : 2800 (part-I)) and direction of the Engineer - in – charge A. with contractor"s mini rig |
| 4 | Charges for lowering of UPVC pipe as per IS:12818 (issued from the department free of cost) after washing of the bore hole by mini drilling rig as per specification and direction of theEngineer - in – charge A. with contractor"s mini rig |
| 5 | 150 mm dia |
| 6 | B.“RS” strainer pipe :- 100 mm dia bore. |
| 7 | Providing and fixing of UPVC end cap / well cap suitable for UPVC "CM" casing or "CS" casing or "RS" pipes as per specification and direction of the Engineer - in - charge. iii. 150 mm dia |
| 8 | Providing and fixing of UPVC reducer suitable for UPVC "CM" casing or "CS" casing or "RS" pipes as per specification and direction of the Engineer - in - charge. ii. 150 x 100 mm dia |
| 9 | Providing and fixing of housing clamp ( made with 12 mm thick MS sheet ) along with well cap (made with 10 mm thick MS sheet ) with necessary arrangements for SBDTW as per specification and direction of the Engineer – in – charge. 125 mm dia 150 mm dia |
| 10 | Providing and lowing of Submersible pump having capacity 2000 GPH 40 mtr head with Suitable single phase 2 HP submersible motor (water filled) suitable for 150 mm x 100 00 bore well as per direction of Engineer In-charge. (CRI/KSB/WORTHINGTON/TAXM)/ LUBI/KIRLOSKAR). |
| 11 | Providing and shrouding of the deep tube well assembly with washed pea gravels ( 2.0 – 4.75 mm effective size ) as per specification ( IS : 4097) using deep drilling rig and direction of the Engineer – in – charge. With pea gravels obtained from Golaghat, Assam. |
| 12 | Supplying and fitting fixing of single phase motor starter unit ( with 2 pole connector, overload relay, volts meter and amps meter) 32 amp main switch (220 V) of Havels/BCH/L&T make including necessary electric wiring and GI pipe earthing etc complete as per direction of the Engineer In-charge foor 3 HP submersible Motor |
| 13 | Providing and fixing G.I. pipes of medium class as per IS : 1239 with latest amendment complete with G.I. fittings and clamps, including cutting and making good the walls etc. complete as per CPWD specification and direction of the Engineer - in - charge. A. External work. 40 mm dia. nominal bore |
| 14 | Providing and fixing G.I. Full way valve as per CPWD specification and direction of the Engineer - in - charge. 40 mm dia |
| 15 | Providing and fixing G.I. Bend /elbow in the pipe line including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge. 40 mm dia |
| 16 | Providing and fixing of UPVC bail plug suitable for 113 mm outer dia UPVC pipes as perdirection of the Engineer – in – charge. |
| 17 | Providing and fixing G.I. equal Tee with the pipe line including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge.a) 40 x 40 x 40 mm dia |
| 18 | Providing and fixing of Brass Union Joints ( Medium class ) with the pipe line including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge.a) 40 mm dia |
| 19 | Providing and fitting fixing lowering, positioning and resting 40 mm dia G.I. column pipe (medium class) conforming to IS : 1239 both end threaded ( maximum length of each GI pipe is 3.00 mtr and 30.00 mtr long column assembly)including fitting fixing of necessary rubber insertion,90 degree GI single end flange bend, GI flange short piece, GI tail piece and 40 mm dia etc complete in all respect as per direction of Engineer In-charge. |
| 20 | Providing and fitting fixing with PVC insulated 3 core flat Copper cable conforming to relevant IS code forubmersible motor with all necessary equipments and fittings as required as per specification and direction of the Engineer-in-charge 2.50 sqmm |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
