Tender For Construction Of Anganwadi Building, At- Nhavekhadi, V.P. Nhave , Tal. Panvel,Dist.Raigad
Tender Value
11.24 Lakhs
Estimated cost
Bid Submission
15 Feb 2024
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
panvel → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Anganwadi Building, At- Nhavekhadi, V.P. Nhave , Tal. Panvel,Dist.Raigad
BOQ
| Sl. No. | Item Description |
| 1 | Item No.1:- Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means |
| 2 | Item No.2: -Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete |
| 3 | Item No 3:-Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) |
| 4 | Item No.4:- Providing uncoursed rubble masonry of trap stones in C.M. 1:6 in foundation and plinth of inner walls including bailling out water manually stricking joints on unexposed faces if specifal finish is to be provided and curing complete |
| 5 | Item No.5:- Providing and laying cast in situ C.C.M.15 of trap metal for coping to plinth or parapet moulded or chamfered as per drawings or as directed roughening the exposed faces if special finish is to be provided and curing complete.te. With natural sand/V.S.I. quality Artificial Sand |
| 6 | Item No.6 :- Providing secondclassBurntBrickmasonrywithconventional/I.S.typebricksincement mortar 1:6 infoundationsandplinthofinnerwalls/inplinthexternalwallsincludingbailingoutwatermanually, striking joints on unexposedfaces, raking out joints on exposedfaces and watering etc. Complete. |
| 7 | Item No. 7:-ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-20oftrap/granite/ quartzite/ gneiss metalforR.C.C. slabsand landings as perdetailed designsand drawingsincludingsteelcentering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic microprocessorbasedPLCwithSCADAenabledreversibleDrum Typemixer/concreteBatchmixplant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 8 | Item No. 8 :- Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels,chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings andschedules.including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 9 | Item No. 9 :- Providing Second Class Burnt Brick masonry with conventional/I.S. type bricks in cement mortar 1:6 in superstructure,includingstriking joints , racon exposed faces andwatering and scaffoldingetc. complete. |
| 10 | Item No10-Providing structural steel work in trusses other similar trussed Purlins and members with all bracing gusset plates etc as per detailed design and drawings or as directed by Engineer in charge including cutting fabricating hoisting erecting fixing in position making riveted/bolted/welded connection and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc complete |
| 11 | Item No 11:-Providing and fixing 6 mm thick A.C.corrugated (Big size) Sheet roofing conforming to I.S. 459-1970 including galvanised iron J or Lhook bolts galvanised iron and bituminous washers galvanised iron clamp bolts and nuts and scaffolding etc complete |
| 12 | Item No. 12 :- Providing and fixing 6 mm thick ISI mark Asbestos Cement ridge capping for roofingincluding galvanisediron hooks, bolts, galvanisediron andbituminous washers, galvanised iron clamps, bolts, nutsincluding scaffolding etc. complete. |
| 13 | Item No. 13 :- Providing sandfacedplaster externallyin cement mortar using approved sreened sand, in allpositions including base coat of 15 mm. thick in cement mortar 1:4 using waterproofing compound at 1 kg. per cement babg curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm. thick in cement mortar 1:4 finishing the surface by taking out gains and curing for 14 days scaffolding etc complete |
| 14 | Item No.14-Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.. |
| 15 | Item No 15:-Providingsillsofrequiredmaterial20mmto25mmthick,onabedofcementmortar1:4 including cement float, filling joints with neat cement slurry, curing, polishing, mouldingedges,cleaning complete.a) Marble other than white makrana |
| 16 | Item No.16 :-Providing and fixingsolid core flush door shutter in single leaf 32 mm. thick decorative type of exterior grade as per detailed drawing approved face veneers 3 mm. thick on both faces or as directed , all necessary bends, mouldings and lipping, wrought iron hold fast, cromium plated fixtures and fastenings , with brass mortise lock, cromium plated handles on both sides and finishing with french polish etc complete |
| 17 | Item No.17- Providing and laying ceramic tiles of somani/RAK/Kajaria/Nitco/Asian or . equivalent make having size30 x 30 cmand 7 to 8 mm.thick for flooring in required position laid on bed of cement mortar 1:4 including cement float, filling joint with white / colour cement slurry, cleaning, curing etc. complete. |
| 18 | Item No 18:-Providing and laying ceramic tiles ofhavingsize 30 x 30 cmand 7 to 8 mm.thick for dado and skirtingin required position with readymade adhessive mortar of approved quality on plaster of cement mortar 1:2 includingfilling joint with white / colour cement slurry, cleaning, curing etc. complete. |
| 19 | Item No 19:-Providing and fixing in positionaluminium sliding window of Two Tracks with rectangular pipe 63.50 x 38.10 x 1.02 mm at weight (0.547 kg/Rmt.) and window frame bottom track section 61.85 x 31.75 x 1.2 mm at weight 0.695 kg/Rmt. top and side tracksections of size 61.85 x 31.75 x 1.2mm thick (0.417 kg/Rmt.). The shutter should be of bearing bottom of size 40 x 18 x 1.25mm thick (0.417 kg/Rmt.) the shutter should be bearing bottom40 x 18 x 1.25mm thick (0.417kg/Rmt.) Interlocking section size of 40 x 18x 1.25mm thick (0.469 kg/Rmt.) and handle section of size 52 x 18 x 1.13mm thick (0.488 kg/Rmt.)and top section 40 x 18 x 1.25 mm at weight .417 kg/rmt.as per detailed drawings and asdirected by engineer in charge with all necessary aluminium sections fixture and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc complete. |
| 20 | Item No 20:-Providing and fixing mild steel grill work for windows, ventilators,etc.15 Kilogram/ One Square Metreas perdrawing includingfixtures necessaryweldingandpainting withonecoatof anticorrosive paint and two coats of oil painting complete. |
| 21 | Item No 21:-Ptoviding and fixing orrisatype white glazed earthenware 575 mm. water closet pan including S\" trap with earthenware footrest ,cast iron soil ,vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank etc. complete |
| 22 | Item No 22:-Providing , laying and fixing ,jointingEco- drain 160 mm SN 4 Nu- Drain Upvc pipes or of equivalent make, manufacture as per EN 13476 or equivalent as per I.S.15328 with fittings such abends,tees,coupler,etc, jointingwithrubberlubricantincludingnecessary excavation,trenchrefilling withselective excavated materialetc. complete. |
| 23 | Item No 23:-Providing and laying in trenches 15 mm dai. CPVC pipe including necessary excavation,fittings. Refilling trenches etc. completeIncludingremovingexistingpipelineif necessaryandconveyingand stacking the same in PWD chowky or as directed etc. complete. |
| 24 | Item No 24:-Providing andfixing in positionUPVC ultra violet stabilized110 mm outer diameter cowl dome confirming to I.S.-4985 including making joints with solvent cement etc. complete |
| 25 | Item No 25:-Providing andfixing 15mm diameterPVCAquakrafttypeofapprovedmake superright angle stop tap with flange including all accessories etc complete |
| 26 | Item No 26:- Providing andconstructing granite kitchenplatform withfixing of stainlesssteelsink 600 mm x 450mm sizeasperdetailed drawingincludingverticalboth sidepolished kadappahstone25to30mmthick supportswithkadappah top35to 40mm thickandpolishedgranite 16to 20mm topwithside stripsof granite at front and both sides of platform raised with two verticalgranitesupports15cmheightandtop graniteof75x40cmincludingcutting, opening for sink of required size in kadappah as well as granite etc. complete. (Platform top size 5.00 m x 0.60 m and height is 0.75 m) |
| 27 | Item No 27:-Providing and fixing H.D.P container one piece moulded water tank made out of high density polythyler and builtcorrugatedinclusiveofdeliveryuptodestinationhoistingand fixing of accessories such as inlet,outletoverflowpipeinclusiveofalltankscapacity between 200 to 1000 liters |
| 28 | Item No 28:-Providing & Applying Royale luxury emulationn of asian / berger/ nerolac / dulex paints or equvalent make on internal wall surfaces as detaile below scrapping for surfaces with emery paper and wipe clean for area .applying asian /berger dulex paints or equvalent wall primer with brush by adding mineral turpentine oil by 8 to 10 % or water by to 20 % allowing to dry for6 to 8 hours after applying / asian / berger /dulex paints or equivalent acrylic wall putty with appropriate prpporation of water of allowto dry for period etc complete |
| 29 | Item No 29:-Providingand applyingtwocoatsof exterioracraylicemulsion paintconfirmingto corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces includingcleaning,preparingthe plastersurface,applyingprimercoat,scaffoldingif necessary , and watering the surface for two days etc complete. |
| 30 | Item No 30:- Providing and fixing false ceiling of12mm thick as per drawings including powder coated G.I. wall angle of 20mm x 20mm size,G.I. grid runners of size 20mm x 38mm at 600mm center to centerboth ways and suspended usingG.I.3mm wire including fixing using butterfly clips and fasteners including transporting, scaffolding all necessarylabourand machinery, finishing etc. complete. |
| 31 | Item No 31:-Providingsoling using80 mm sizetrap metal in 15 cm. layer includingfilling voidswithCrushed sand/grit, ramming, watering etc. complete. |
| 32 | Item No 32:- Providingand fixingheavyduty interlockingconcreteGrey pavingblocks of60 mm thicknessof having a strength of 300 Kilogram/Sq.cm. of approvedquality andshape ona bed of crushed sand of 25 to30 mm thick including skirting joints and cleaningetc. complete. |
| 33 | Item No 33:-Providing and fixing 90 x 60 cm marble plate engraving 10 cm. height letter ,figures including painting the letters/figures with approved colour and shade etc. complete. |
| 34 | Item No 34:-Quality Control testing charges1) Bricks - Compressive Strength |
| 35 | Item No 35:- Rates for material testing charges 2) C.C.M-20 - Compressive Strength |
| 36 | Item No 36:-Royalty Charges of materials A) Sand |
| 37 | Item No 37:-Add 18 % For GST Charges |
| 38 | Item No.38 :-Add 1 % For Labour Insurance |
| 39 | Item No. 39:- Add 1 % ForSQM charges |
| 40 | Item No. 40:- Add For Eletrification charges |
AI Tender Summary
Tender Timeline
Feb 10, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 15, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 16, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender