Military Engineer Services-MES has published Tender For Repair To Flooring Dado, Joinery, Sanitary Fittings And Plumbing In Md And Otm Accommodation Under Age B/Rii Of Ge South Pune. Submission Date for this Tender is 07-03-2024. Plumbing and Sanitary Work Tenders in pune Maharashtra. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 23-Feb-2024 | 8534 Corrigendum No 2 Date | Date | 07-03-2024 |
| 2 | 23-Feb-2024 | 8534 Corrigendum No 1 BOQ | BOQ | 07-03-2024 |
| Sl. No. | Item Description |
| 1 | Taking down chowkhat or frames wooden / steel exc. 1.5 sqm but n. exc. 4 sqm each with shutter without taking off shutter from the frame complete all as specified and directed. |
| 2 | Taking down chowkhat or frames wooden / steel n. exc. 1.5 sqm each with shutter without taking off shutter from the frame complete all as specified and directed. |
| 3 | Taking down shutters of any description n. exc. 1 Sqm each, complete all as specified and directed. |
| 4 | Taking down shutters of any description exc. 1 Sqm each and n. exc. 2 Sqm each, complete all as specified and directed. |
| 5 | Taking down shutters of any description by electronic cutter machine and making good the cutting portion, size of shutter not exceeding 1 Sqm each, complete all as specified and directed. |
| 6 | S & FSolid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS tube, suppling and fixing in opening complete all as per specification and as directed by Engr-in-Charge |
| 7 | S&F factory made solid panel PVC door shutter 30mm thick (stiles) consisting of frame made out of M.S tubes for top & bottom rails; M.S frame shall be covered with heat moulded plain colour PVC ‘C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification and drawing as per product Drawing given on relavent page of SSR Part-II2020 Refer item No. 8080 as specified and directed by Engr-in-charge. |
| 8 | S&F 100 mm size stainless steel butt hinges medium weight, cold rolled, complete all as specified and directed. |
| 9 | S&F aluminium anodised barrel tower bolt 150mm legth of extruded section, complete all as specified and directed. |
| 10 | S&F 150 mm size aluminium handles, cast type, anodised, complete all as specified and directed. |
| 11 | S&F 300mm long aluminium alloyanodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and as directed |
| 12 | S&F three track sliding window with two or more shutter witth 4 mm thick tinted glass , one shutter of stainless steel wire cloth 0.36 mm nominal dia & 1.18 mm width aperture for mosquito proofing with good quality bearing, handle lock, rubber beading and glazing clips etc by using following aluminium powder coated sections conforming to catalogue of`Jindal Aluminum Ltd " or equivalent in Ajit India Pvt Ltd or Crystal Bombay complete all as specified directed by Engr-in-Charge. (a) Bottomframe 20620 (b) Top frame & Verrtical 20621 (c) Handle (side) 20606 (d) Shutter inter lock20724 (e) Shutter top & Bottom20844 (f) Glazing Clip19352 |
| 13 | S&F ventiltors/ louvers using 4 mm thick x 10 cm wide frostedglass strips and frame by using following aluminium powder coated sections conforming to catalogue of "JINDAL" or of equivalent make and rubber beading etc complete all as specified and as directed. (a) SP20048 (b) Glazing clips19352 |
| 14 | Easing of wooden doors or windows by means of plaining, adjusting, re-fixing of panels / single leaf / double leaf / triple leaf including necessary screws or nails etc., and complete all as specified and directed. |
| 15 | M&L for Non-skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over & including 15 mm thick screed bed in CM 1:6, including taking down of existing floor finishes and removal of debries material outside defence land etc. complete all as specified and directed |
| 16 | M&L for Vitrified Ceramic tiles (Light shade), 10 mm thick Colour (square / rectangular) polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.36 sqm, as in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match,laid over and including 15mm thick screed bed in CM (1:6)etc complete all as specified and as directed. |
| 17 | M&L for Vitrified Ceramic tiles (Light shade), 10 mm thick Colour (square / rectangular) polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.36 sqm, as in skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match,laid over and including 10mm thick rendering in CM (1:4) including triangular filleting in CM 1:4 on tope edges including taking down cement plaster / tiles and removal of debries material outside defence land etc. complete all as specified and directed |
| 18 | M&L for coloured glazed vitrified tiles of size 300 mm x 600 mmx 7mm thick on vertical surfaces such asskirtings, dados and riser to steps, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 10 mm thick rendering in cement mortar 1:4 including triangular filleting in CM 1:4 on tope edges including taking down cement plaster / tiles and removal of debries material outside defence land etc. complete all as specified and directed |
| 19 | M & L for granite 18-20mm thick (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window-cills, Door cills, cooking platforms and like, set in neat cement slurry including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including, laid over and including15mm thick screed bed in CM 1:6, including taking down of old unserviceable stone slab / tiles complete all as specified and directed. |
| 20 | Rounding to edges of stone slab one edge, such as in steps, cooking platform and other similar situations, complete all as specified and directed. |
| 21 | M&L for Machine cut cudappah stone slab 20mm to 25 thick, laid over and including screed bed or bedding layer 20mm thick in CM 1:6, set and jointed in neat cement slurry, pointed in CM 1:2 mixed with pigment to match the shade of slab including rubbing and polishing etc including dismantling of old existing unserviceable stone slabs / tiles of any type and removal of debries material outside defence land etc. , complete all as specified and as directed. |
| 22 | M & L for carrying out non-destructive water proofing treatment to sunken slab of toilets consisting of one WC, one nahani trap at bathroom and one nahani trap at Kitchen including cleaning of surface with wire brush removing loose particles, greasy elements, detecting leakage point, sealing joints of tiles/cracks in floor and wall and injecting injection of CORESEAL 135A/CORESEAL 135B all as per manufacturer’s instructions complete all as specified and directed by Engr-in-Charge. Note:-1. The quoted rates deemed to be inclusive of replacement of any defective fittings / fixtures of any type / material elbows, bend, tee, reducer single "Y", double "Y" with cleaning eye and concealed piece of pipe below floor as well as between wall and bend. 2. Makes :- AQUATYTE, CREAT SEAL grouting compound of Ashwin Enterprises, GPSS (ground penetrating sealing system) of Saga polytech or similar brand as approved. |
| 23 | M & L for 15 mm bore GI tubing medium grade including with all fitting & fixtures, fixed on walls and ceilings or laid in floors etc including taking up or down steel tubing and connections, complete all as specified and directed. |
| 24 | M & L for 20 mm bore GI tubing medium grade including with all fitting & fixtures, fixed on walls and ceilings or laid in floors etc including taking up or down steel tubing and connections, complete all as specified and directed. |
| 25 | M&L for re-fixingof 15mm bore serviceable GI pipe obtained from item no. 83.00 with and including with all new fittings and fixtures complete, in new or old position, complete all as specified and directed. |
| 26 | M&L for re-fixingof 20mm bore serviceable GI pipe obtained from item no. 84.00 with and including with all new fittings and fixtures complete, in new or old position, complete all as specified and directed. |
| 27 | S & F in repairs gun metal gate valves(Class I), with iron wheel head,screwed both ends for iron pipe, ISI marked, all as specified and directed for the following bore dia of pipe:- (a) 15mm bore. |
| 28 | (b) 20mm bore. |
| 29 | Cutting chases, pinning in, concrete block walling & making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc. and cutting chases for concealed water tubing and making good, cutting n. exc. 10 cm girth, complete all as specified and directed. |
| 30 | S&F in repairs 18mm thick PVC sheet shutters, one side prelam of any shade as in cupboard or kitchen cabinate shutters etc complete all as specified and directed. |
| 31 | S & F Continuous (piano) hinges 30 mm width of flap, mild steel, bright finish or electro galvanised,complete all as specified and directed. |
| 32 | S&F 100mm size extruded brass handles, fabricated type, polished, complete all as directed. |
| 33 | S&F magnetic door catches for cupboard / cabinet etc,complete all as specified and directed. |
| 34 | S & F in repairs looking mirror 600mm X 450mm X 5.5mm thick bevelled edge mirror of selected quality glass mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers with aluminium beading all around complet all as specified and as directed. |
| 35 | S&Fin repair health faucet, brass chromium plated, ABS body, including 1.0mtr flexible cod complete all as specified and directed. |
| 36 | S&F in repairs 15 mm boretwo way bib tapchromium plated, fancy type,cast copper alloy long bodywith wall flange complete all as specified and directed |
| 37 | S&F in repairs 15 mm bore PVC connection 600 mm long with PTMT nut and PVC washer, complete all as specified and directed. |
| 38 | S&F in repairs transparent glass of 7.5x7.5 inch corner bath room shelves with bracket, complete all as specified and directed. |
| 39 | S&F in repairs 10 litres capacity, PVC flushing cistern,low level including PVC waste coupling & PVC flush pipe of 32 mm dia and complete internal macanism including fixing on existing brackets, complete all as specified and directed. |
| 40 | S&F in repairs stainless steel chromium plated toilet paper holder,complete all as specified and directed. |
| 41 | S&F in repairs 15mm bore wall mixer 3 in 1 for mixing hot & cold water including telephonic shower for 15mm bore of pipe confirming to CAT No. CON-CHR-280KN OF "Jaquar" of equivalent cat part of make as mentioned here-in-after, complete all as specified and directed. |
| 42 | S&F brass chromium plated shower rose, 125mm size, fancy type, including shower arm, complete all as specified and directed. |
| 43 | S&F in repair 15mm bore bib taps, brass chromium plated, cast copper alloy fancy type handle, screwed down, screwed for iron pipes fixed in repairs, complete all as specified and directed. |
| 44 | S&F in repairs 20mm bore ‘D’ type brass CP tubular towel rail 60 cm long between flanges complete fixed in repairs,complete all as specified and directed. |
| 45 | S&F in repairs 15mm bore stop valve / angular stop valve, brass chromium plated, fancy type with long shank and cup fixed to pipe of 15mm bore,complete all as specified and directed. |
| 46 | S&F in repairs 20mm bore stop valve brass chromium plated, fancy type with long shank and cup (concealed type) fixed to pipe of 20mm bore,complete all as specified and directed. |
| 47 | S&F in repair soap dish, brass chromium plated,complete all as specified and directed. |
| 48 | S&F in repairs 15mm bore pillar taps, fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified and directed. |
| 49 | S&F in repair vitreous china wash hand basin, white, 550x 400mm flat back including providing CI brackets, PVC waste pipe 32mm dia, waste coupling 32mm bore of CPand including 15mm bore pillar tap fancy type, swan neck etc,complete all as specified and directed. |
| 50 | S&F in repairs vitreous china wash down water closet pan, "Pedestal" coloured, including fixing bolts etc including PVC seat cover white with flat bottom including MS, CP or aluminium anodised hinges devices with and including PVC low level flushing cistern 10 Ltr capacity with all internal fitting, inlet, outlet pipe connections etc. complete all as specified and directed. |
| 51 | S&F in repairs sink made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
