Rural Works Department has published Tender For Construction Of Road -Pmgsy Road To Tabha ( Pangja ) - 5Km Formation Cutting, Rcc Slab Culvert, Pucca Side Drain, Protection Works, Sub Grade Preparation, Shoulder, Nfssb,Csb, Prime Coat, Tack Coat, Bc, Setting Out, Road Furniture Etc. Submission Date for this Tender is 23-03-2024. Road Work Tenders in Shi Yomi Arunachal Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 10-Feb-2024 | Date and Time | Date | 26-02-2024 |
| 2 | 26-Feb-2024 | Date Extension | Date | 08-03-2024 |
| 3 | 08-Mar-2024 | Extension of Time-2nd Time | Date | 14-03-2024 |
| 4 | 13-Mar-2024 | Extension of Time-3rd Time | Date | 23-03-2024 |
| Sl. No. | Item Description |
| 1 | Clearing and grubbing road land including uprooting wild Vegetation, grass, bushes, shurbs, saplings and trees of girth upto 300 mm. removal of stumps of such trees earlier and disposal of unserviceable materails and stackingof serviceable materials to be used or auctioned, upto a lead of 1000 mtr i/c removal and disposal of top organic soil not exceeding 150 mm thickness as per technical specification clause 201 |
| 2 | (I)By Manual Means (B)In area of non thorny jungle |
| 3 | (II)By Manual Means (B)In area of thorny jungle |
| 4 | a) Construction of reference pillars as per Fig. 1600.1 (b) as per drawing and Technical Specification Clause 1602.1 |
| 5 | b) Construction of back piller as per Fig. 1600.1( c) as per drawing and Technical Specification Clause 1602.3 |
| 6 | c) Construction of Job pillers as per Fig. 1600.1 (d) and Technical Specification Clause 1602.4 |
| 7 | Excavation in All kind of soil in Hilly Area by mechanical means including cutting and trimming of side slopes and disposing of excavated earth with a lift upto 1.5 m and a lead upto 20 m as per Technical Specification Clause 1603.1 |
| 8 | Pavement: |
| 9 | Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1. |
| 10 | Construction of Sub Grade: Compacting original ground supporting subgrade Loosining of the ground upto the level of 300mm below the subgrade level , watered, graded and compacted in layers to meet requirement of Table 300.1 and 300.2for subgrade construction as per technical specification clause 303.5.2. |
| 11 | Non Frost Susceptible Sub-Base (NFSSB):Construction of Non Frost Susceptible Sub Base (NFSSB) by providing granular material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete in all aspects as per MoRTH Specification clause 401. |
| 12 | CRUSHED STONE BASE (CSB): Providing Crushed Stone Base (CSB) by providing crushed stone aggregate & stone dust, depositing on prepared surface by hauling vehicles, spreading, and mixing with a motor grader, watering and compacting with a vibratory roller to achieve the desired compaction as per MoRTH specification clause complete in all aspects. |
| 13 | Prime Coat(Medium porosity): Providing and applying primer coat with Bitumen emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means. |
| 14 | Tack Coat: Providing and applying tack coat with Bitumen emulsion using emulsion distributor at the rate of 0.20 kg per sqm on the prepared bituminous / granular surface cleaned with Mechanical broom. |
| 15 | Bituminous Concrete (40 mm thick): Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5 % of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 complete in all respects. |
| 16 | Cross Drainage and Protection Works |
| 17 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitablematerial. |
| 18 | Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 Nominal mix 1:3:6 P.C.C grade M 10 |
| 19 | Stone Masonary work in cement mortar 1:3 for sub structure complete as per drawing and technical specification |
| 20 | a)Coursed Rubble msonary (first sort) |
| 21 | b) Coursed rubble masonry (2nd sort)In cement mortar 1:3 |
| 22 | Backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification Clause 1204.3.8 (i)Sandy materials |
| 23 | Providing weep holes in brick masonary/plain / reinforced concrete abutment, wing wall / return wall with 100mm dia ac pipe standing through the full width of stucture with slope of 1V:20H towards drawing foce. Complete as per drawing and technical specification. |
| 24 | Providing and laying reinforced cement concrete in superstructure as per drawing and technical specifications Clauses 800, 1205.4 and 1205.5 R.C.C grade M 20 For nominal mix 1:2:4 |
| 25 | Providing and laying reinforced cement concrete in superstructure as per drawing and technical specifications Clauses 800, 1205.4 and 1205.5 RCC M25 |
| 26 | Supplying, fitting, and placing HYSD bar reinforcement in superstructure complete as per drawing and technical specifications Clauses 1002, 1010 and 1202 |
| 27 | Stone masonry in cement mortar for substructure complete as per drawing & technical specification Clauses 702, 704, 1202 and 1204 In 1:4 cement mortar |
| 28 | White washing of parapet walls of CD work and tree truncks White washing two coats on parapet walls and tree trunks including preparation of surface by cleaning scraping etc. as per technical specifications Clause 1915 |
| 29 | Providing and laying wire created boulder structures boulder size 22.5 cm to 45 cm having 25 kg average weight for each i/c dumping/laying in S.W.G. Wire mesh of 10 cm x 10 cm (woven diagonally) 4mm dia i/c packing with small size stone spalls and carrying of boulders from a lead of 50 mtr and lift up to 1.5 mtr i/c lying properly the mesh by cutting the mouth and hoisting of wirewhere felt necessary as per direction of Engineer-in-Charge technical specifications Clause 1301. ( Based on SDB Rural Road Chapter-14, Item No.14.2) |
| 30 | Side Drain: |
| 31 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitablematerial. |
| 32 | Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 P.C.C grade M 10 i) Nominal mix 1:3:6 |
| 33 | Stone masonry in cement mortar for substructure complete as per drawing & technical specification Clauses 702, 704, 1202 and 1204 III) Random rubble masonry i) In cement mortar (1:3) |
| 34 | Plastering with cement mortar (1:4), 15 mm thick on brickwork in substructure as per technical specification Clauses 613.4 & 1204 |
| 35 | Unlined Trapezoidal Shaped Side Drain Construction ofunlined surface drains of average cross-sectional area 0.40 sqm in soil to specified lines, grades, levels and dimensions. Excavated material to be used in embankment with a lift upto 3m and lead of 50 m (average lead 25 m) as per Technical Specification Clause 307. A) Manual Means |
| 36 | Guard Post |
| 37 | item:Road Furniture |
| 38 | Providing and Fixing Citizen information Board of VVP Project(RCC)"A"Providing and fixing of typical PMGSY Citizen information sign board as per MORD specifications and drawing of cast-in-situ RCC,(Size of RCC post 25cmx25cmx90cm below G.L. & 15cmx15cmx245cm above G.L.),(Size of board 2x 90cmx80cmx7.5cm, ) incl.earth work, finishing with 15mm pluster 1:4 and neat cement punning, applying priming coat, painting and lettering with appropiate colour with required shade of approved qualityready mix paint. |
| 39 | Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as perdrawings and Technical Specification Clause 801 |
| 40 | Providing and erecting direction and place identification retro-reflectorised sign asper IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 2 mm thickwith areanot exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 x 450 x 600 mm, 600 mm below ground level as per approved drawing and Technical Specification Clause 1701 |
| 41 | KilometreStone Reinforced cement concrete M15grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703 i) 5th Kilometre Stone (pre |
| 42 | ii)Ordinary Kilometer Stone (Precast) |
| 43 | Providing and fixing of typical VVP informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges.The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level.The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube.All M.S. will be stove enameled on both sides.Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour.All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1 |
| 44 | Routine Maintenance for Road Construction |
| 45 | First Year |
| 46 | Second Year |
| 47 | Third Year |
| 48 | Fouth Year |
| 49 | Fifth Year |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
