Tender For Provision Of Perimeter Lighting At Safdarjung Airport, New Delhi
Tender Value
1.74 Crore
Estimated cost
Bid Submission
01 Mar 2024
0 days left
EMD
3.48 Lakhs
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
safdarjung → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Provision Of Perimeter Lighting At Safdarjung Airport, New Delhi
BOQ
| Sl. No. | Item Description |
| 1 | SH - I:CABLES |
| 2 | Supply of following sizes of aluminium conductor XLPE insulated and PVC sheathed armoured cable conforming to IS 7098 (Part-I) 1988 with up to date amendments. |
| 3 | 3 .5 core, 185 sq.mm |
| 4 | 4 core, 25 sq.mm |
| 5 | SH - II: Poles &other accessories |
| 6 | Supply of 3.0 metre high, hot dip galvanised octagonal poleswith 130 mm bottom A/F & 70 mm top A/F made up of 3 mm thick sheet, along with base plate of size 200 mm X 200 mm X 12 mm thick, along with suitable length ( minimum 1 mtr)Single Arm Bracket of 40NB A-class pipe with suitable end to mount LED fitting at suitable angle as per lux level design, suitably designed door with space for internal junction boxand as per technical specifications etc. complete as required comprising following accessories: Note- Material of construction for pole shall be as per IS 2062/BSEN 10025 with yield strength of 350 N/Sq.mm.(a) Supply of 4 nos of M16 X 450 long \"J\" type EN 8 grade foundation bolts along with template, 12 nuts and washers.(b) Bakelite sheet with 1 Nos of 6A DP MCB and stud type connector suitable for looping of 4C x 25 Sq mm cable. |
| 7 | Supply of 6.0 metre high,hot dip galvanised octagonal poleswith 130 mm bottom A/F & 70 mm top A/F made up of 3 mm thick sheet, along with base plate of size 200 mm X 200 mm X 12 mm thick, along with suitable length ( minimum 1 mtr)differential Single Arm Bracket of 40NB A-class pipe with suitable end to mount LED fitting at suitable angle as per lux level design, suitably designed door with space for internal junction and as per technical specifications etc. complete as required comprising following accessories: : Note- Material of construction for pole shall be as perIS 2062/BSEN 10025 with yield strength of 350 N/Sq.mm.(a) Supply of 4 nos of M20 X 600 long \"J\" type EN 8 grade foundation bolts along with template, 12 nuts and washers.(b) Bakelite sheet with 1 Nos of 6A DP MCB and stud type connector suitable for looping of 4C x 25 Sq mm cable. |
| 8 | Supply of 6.0 metre high,hot dip galvanised octagonal poleswith 130 mm bottom A/F & 70 mm top A/F made up of 3 mm thick sheet, along with base plate of size 200 mm X 200 mm X 12 mm thick, along with suitable length ( minimum 1 mtr) Double Arm Bracket of 40NB A-class pipe with suitable end tomount LED fitting at suitable angle as per lux level design, suitably designed door with space for internal junction and as per technical specifications etc. complete as required comprising following accessories: Note- Material of construction for pole shall be as perIS 2062/BSEN 10025 with yield strength of 350 N/Sq.mm.(a) Supply of 4 nos of M20 X 600 long \"J\" type EN 8 grade foundation bolts along with template, 12 nuts and washers.(b) Bakelite sheet with 1 Nos of 6A DP MCB and stud type connector suitable for looping of 4C x 25 Sq mm cable. |
| 9 | Providing and laying in position 1:2:4 reinforced cement concrete foundation (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) made out of M-20 grade concrete of size 450 mm (L) x 450 mm wide and 900 mm deep including excavation of earth, providing cutting, bending and placing in position, reinforcement of cold twisted bars of suitable dia and length - 8 nos. and reinforcement ring of cold twisted bar ofsuitable dia and length - 6 nos. (with suitable spacing) as required with positioning of foundation bolt set and providing 63 mm. diameter (O.D) DWC, HDPE Pipe for cable entry & exit etc complete as required.For 6 Meter Pole i/c installation of pole complete as required. |
| 10 | Providing and laying in position 1:2:4 reinforced cement concrete foundation (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) made out of M-20 grade concrete of size 300 mm (L) x 300 mm wide and 900 mm deep including excavation of earth, providing cutting, bending and placing in position, reinforcement of cold twisted bars of suitable dia and length - 04 nos. and reinforcement ring of cold twisted bar ofsuitable dia and length - 06 nos. (with suitable spacing) as required with positioning of foundation bolt set and providing 63 mm. diameter (O.D) DWC, HDPE Pipe for cable entry & exit etc complete as required.For 3 Meter Polei/c installation of pole complete as required. |
| 11 | SH - III:FITTING & Fixtures |
| 12 | Supply of LED Street Lightfully made of pressure die cast aluminum having rated minimum lumen output of 9000 Lumens with rated efficacy at system level (not chip level)>110 lumens/Watt,life of fixture is not less than 50000 hrs @ L-70 lumen maintenance, CCT upto 5700K - 6500K, CRI minimum 70, PF =0.95, THD< 10% and an operating voltage range of 140 to 270V, internal surge protection > 4KV. The Street light should be of Al pressure die cast construction & powder coated and with toughned glass/PC Lens. The luminare should be IP 66 rated . All cables used in the product should be IS compliant . IK Rating ofIK07 or above.The fixture should comply with the other parameters as per IS10322 |
| 13 | Supply of LED Street Lightfully made of pressure die cast aluminum having rated minimum lumen output of 3000 Lumens with rated efficacy at system level (not chip level)>110 lumens/Watt,life of fixture is not less than 50000 hrs @ L-70 lumen maintenance, CCT upto 5700K - 6500K, CRI minimum 70, PF =0.95, THD< 10% and an operating voltage range of 140 to 270V, internal surge protection > 4KV. The Street light should be of Al pressure die cast construction & powder coated and with toughned glass/PC Lens. The luminare should be IP 66 rated . All cables used in the product should be IS compliant . IK Rating ofIK07 or above.The fixture should comply with the other parameters as per IS10322 |
| 14 | SH - IV:CABLE LAYING |
| 15 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. |
| 16 | Upto 35 sq mm |
| 17 | Above 95 sq. mm and upto 185 sq. mm |
| 18 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL/HDPE pipe as required. |
| 19 | Upto 35 sq. mm |
| 20 | Above 95 sq. mm and upto 185 sq. mm |
| 21 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. |
| 22 | Upto 35 sq. mm (clamped with 1mm thick saddle) |
| 23 | Above 95 sq. mm and upto 185 sq. mm (clamped with 40x3mm MS flat clamp) |
| 24 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. |
| 25 | 3.5 X185 sq.mm |
| 26 | 4 X25 sq.mm |
| 27 | Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required. |
| 28 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. , complete as required. |
| 29 | 63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 30 | Providing, laying and fixing 100 mm dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required. |
| 31 | Supply & Laying of 110 mm dia (PE-80 & PN-8) HDPE pipe as per IS 4984 through trenchless technology by drilling the bore of suitable dia directly in ground upto the depth of 3 meters from the ground level including necessary joining, coupling, splicing etc complete as required. |
| 32 | Fabrication, Installation, Testing& Commissioning of Feeder Piller type Bus bar boxsize ( 450 x 600 x200) mm for loop in & loop out of supply cable, made out of 2 mm thick CRCA sheet IP 54,free standing dust and vermin proof,with front hinged lockabledoors, suitable for operation on 3 phase, 415 V, 50Hz AC system with250 Amp, TPN busbarsi/c angle iron standsize 50mm x 50mm x 5mmand 60cm height,i/c digging & grounting with cement concrete etc. as reqd |
| 33 | SH - V: ITC OF FITTINGS |
| 34 | Installation, Testing and Commissioning of LED type fitting on 6 Mtr (Approx)Octagonal Pole i/c wiring with 3 C x 2.5 sqmm PVC insulated & PVC round sheathed copper conductor cable of suitable length upto loop in loop out box including necessary connection etc complete as required. |
| 35 | Installation, Testing and Commissioning of LED type fitting on 3 Mtr (Approx)Octagonal Pole i/c wiring with3 C x 2.5 sqmm PVC insulated & PVC round sheathed copper conductor cable of suitable length upto loop in loop out box including necessary connection etc complete as required. |
| 36 | SH - VI: LT PANELS & OTHER ELECTRICAL EQUIPMENT |
| 37 | Design, Fabrication, Installation, Testing& Commissioning of Feeder Piller, cubicle type, made out of 2 mm thick CRCA sheet with100 x 50 mm channel baseframe in the bottom, totally enclosed, IP 65, free standing dust and vermin proof, outdoor, compartmentalised with front & back hinged lockable double doors, suitable for operation on 3 phase, 415 V, 50Hz AC system with TPN busbars with internal control wiring of minimum 2.5 sqmm size FR PVCinsulated wires, interconnection, duly powder coated of approved shade with angle iron standsize 50mm x 50mm x 5mmand 60cm height,i/c digging & grounting with cement concrete etc. as per specifications having following switchgers and accessoriesas per the approved drawing.(A) INCOMER(i) Onload Changeover switch 160 A, 4P - 1No(ii)MCCB, 4P, 125 A , 35 KA Breaking Capacity with Ics=Icu=100% withthermal magnetic release - 1 No(B) Metering /Indication(i) Digital Ammeter with selector switch alongwith 3 nos.CT\"s of suitable ratio & burden,for incommer-1 set(ii) LED indicating lamp-R,Y,B with toggle switchfor incommer- 1 set (3 Nos) (iii) Digital Voltmeter for incommer- with selector switch & 3 nos. 2 Amp control MCB for voltmeter & indicator-1 set(C) Bus bars One set of 250 A TPN bus bars of high conductivity electrolytic quality ,Aluminium alloy.(D) OUTGOINGS(i)MCCB, 4P, 125 A ,35 KA Breaking Capacity with Ics=Icu=100% withthermal magnetic release - 1Nos.(ii)MCB,TPN, 16 A , 10 KA Breaking Capacity at 415V AC , C Curve- 02Nos(iii)MCB,TPN, 32 A , 10 KA Breaking Capacity at 415V AC , C Curve-05 Nos(E) SUB INCOMER(i) 32A FP MCB 10KA WITH 32A, 4P CONTACTOR, COIL VOLTAGE 240 V with auxilary contact (2NO+2NC)with auto/ off/ manual switchwith 60 ampTPN, alu bus bus -01 Set ii) LED illuminated push button actuator - 02 Nosiii)24 HOURSTime switch- 01 no(E) OUTGOINGS(i) 10A SP MCB 10KA-16Nos |
| 38 | SH - VII: EARTHING |
| 39 | Earthing with G.I pipe 4.5mm long x40 mm dia including accessoires, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc.(with charcoal or coke and salt )complete as required. |
| 40 | Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required. |
| 41 | Providing and laying 6 SWG dia G.I. Wire in existing DWC pipe/ surface/recessed for loop earthing of metallic poles including connection with G.I. thimble as required. |
| 42 | SH - VIII: Dismantling |
| 43 | Dismantling of pole/ street light standard/ strut embedded in cement concrete foundation etc. as required. |
AI Tender Summary
Tender Timeline
Feb 09, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedMar 01, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 04, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender