Tender For Drilling Of Deep Borewell And Minipower Pump At Ward Nonarayanapuram Street,Ward No 5 Chokkalingampuram South Street,Ward No 7 Sarvodaya Street West Side,Ward No 18 Thandayarkulam Subash Street And Extension Of Pipe Line At Ward No 12 Yadavar S
Tender Value
18.10 Lakhs
Estimated cost
Bid Submission
16 Feb 2024
0 days left
EMD
18100
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
panagudi → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Drilling Of Deep Borewell And Minipower Pump At Ward Nonarayanapuram Street, Ward No 5 Chokkalingampuram South Street, Ward No 7 Sarvodaya Street West Side, Ward No 18 Thandayarkulam Subash Street And Extension Of Pipe Line At Ward No 12 Yadavar South Street Sintex Tank To Two Cross Street In Panagudi Town Panchayat.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation for foundation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc.,as per SS 20 A. TNDSS NO: 23 & 24 VI (S2) VI,VII 9,10with standard specifications. |
| 2 | Plain Cement Concrete 1:4:8 Mix (one part cement, four part sand and Eight part of aggrigate) using 40 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing. Laying and curing etc., complete as per TNDSS NO : 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge. |
| 3 | Plain Cement Concrete 1:2:4 Mix (one part cement, two part sand and four part of aggrigate) using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc., complete as per TNDSS NO: 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge. |
| 4 | Plain Cement Concrete 1:3:6 Mix (one part cement, three part sand and six part of aggrigate) using 40% of 40mm size and 60% of 20 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing. Laying and curing etc., complete as per TNDSS NO: 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge. |
| 5 | Brick Work in Cement Mortor 1:5 Mix (one cement, five sand) using new best II Class Bricks of size9 ” x 4 3/8 “x 2 3/4 ”from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.(For 10 M3) |
| 6 | Collection supply and filling of well gravel filling approved quarry including cost andConveyance of all materials to site and all labour charges for filling etc., Complete. |
| 7 | Plastering in Cement Mortor 1:5 Mix (one cement, five sand) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications. |
| 8 | Supplying and fixing in position of steel doors & windows including cost & conveyance and all labour charges for fixing the furniture including all other incidental charges, etc. complete complying with std. Specification |
| 9 | Exterior Emulsion paint Two coats with good quality of approved Emulsion paint including cost of all materials to site and all labour charges for mixing applying and proper curring etc., Complete as per Standard Specificationsfor 10 sqm |
| 10 | Painting two coats with ready mixed synthetic enamal paint including cost & conveyance and all other incidental charges etc. complete for iron work |
| 11 | Supplying and delivery of the 1.5 HP submercible Motor 50 LPM 60 metres head ISI mark as per standard specification |
| 12 | Supply and delivery of Electrical specials including all labour charges etc..complete |
| 13 | Service wire |
| 14 | ELCB |
| 15 | Wooden board 600*450mm |
| 16 | Fuse carrier unit 63 Amps |
| 17 | Supply and delivery and fixing of HDPE tank as per IS 12701 / 1996 including loading, unloading ,tranportation and labour charges for fixing 1000 Ltr Tank |
| 18 | Errection of 1.5HP submersible motor with necessary fittings. |
| 19 | Supply and delivery of Panel Board including cost & Conveyance all labour charges etc.,complete |
| 20 | Drilling of 150mm dia deep bore well in hard rock area to required depthincluding cost and all labour charges and all other incidental charges etc complete. Upto 150 m from GL |
| 21 | Upto 150 m from below GL |
| 22 | 151m upto 180m |
| 23 | 181 m to 210 m |
| 24 | 211 m to 240 m |
| 25 | Supply and Fixing of 180mm OD 6KSC PVC Pipe for casing Pipe for Medium depth in to drilled bore well. |
| 26 | Supply and Delivery of 4.0 Sqmm Flat type Cable for Submergible motor including cost and conveyance of all materials etc. complete. |
| 27 | Supply and delivery of 2\"(63mm ) HDPE pipeincluding cost andConveyance of all materials to site and all charges for filling etc., Complete |
| 28 | Supply and fixing of PVC pipes and specials including all cost of labours and material cost etc., |
| 29 | Cast iron Nahini |
| 30 | PVC 32 mm dia pipe |
| 31 | 32mm coupler |
| 32 | 32 mm elbow |
| 33 | 32 mm Tee |
| 34 | 32mm * 25mm reducer |
| 35 | PVC 25mm dia pipe |
| 36 | Earth work open excavation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc., as per SS 20 A. TNDSS NO: 23 & 24 VI (S2) VI,VII 9,10with standard specifications. |
| 37 | Supply and delivery of 90mm HDPE pipe 6kg/m including cost andConveyance of all materials to site and all charges for filling etc., Complete. |
| 38 | Suppl and fixing of GI pipe and PVCpipe speacial including cost andConveyance of all materials to site and allcharges for filling etc., Complete. |
| 39 | GI Tee (80mm) |
| 40 | GI Coupler(80mm) |
| 41 | GI Elbow(80mm) |
| 42 | Sluice valve(80mm) |
| 43 | Lowering of HDPErigid pipes and specials to trench and laying to proper grade and alignment,jointing with PVC couplers with cement paste. |
| 44 | Refiling the excavated earth including cost andConveyance of all materials to site and all labour charges for filling etc., Complete. |
AI Tender Summary
Tender Timeline
Feb 10, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 16, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 16, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender