Tender For Construction Of Park At Ward No.18, Methina Nagar Sf No 651,652 In Panagudi Town Panchayat.
Tender Value
12 Lakhs
Estimated cost
Bid Submission
16 Feb 2024
0 days left
EMD
12000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
panagudi → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Construction Of Park At Ward No.18, Methina Nagar Sf No 651, 652 In Panagudi Town Panchayat.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram,gravel,stoney earth and earth mixed with small size boulders SS.20B in ordinary soil and to full depth as may bedirected except in hardrock requiring blastinginclusive of shoringand baling out water wherever necessary refillingthe sides of foundation with excavated soilotherthan sand in layers of 15cm thick well rammed andcompleted depositing the surplus excavated soil with in the compound inplaces shown by the departmental officers with intial lead and lifts and cleaning and levelling the site etc.,complete with standard specification |
| 2 | Footings |
| 3 | Grade beam |
| 4 | Plain Cement concrete 1:4:8 (one cement, four sand, eight aggregate) using 40mm gauge handbroken granitestone jelly for foundation including dewatering if foundnecessary and laid in layers of not more than 15 cmthick and compacted,etc., complete complying withstandard specfication. |
| 5 | Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X60cm X 10cm and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed (SI 154-A) |
| 6 | Footing,Grade & Plinth Beam |
| 7 | Columns |
| 8 | Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS staandards. (No separate payment will be made by the Department for the excess usage of materials) |
| 9 | Suppling and fabricating and placing in position MS(or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost ofsteel and binding wire also in all floors. |
| 10 | Brick work in following Cement Mortar using best quality of Country Bricks of size 8-3/4\" x 4-1/4\" x 2-3/4\" for foundation and basement including curing, etc., complete complying with standard specifiction. |
| 11 | Plastering with cement mortar 1:5 (One cement and five sand) ,12 mm ,thick in all floors including cost and conveyance of all materials to site etc,complete as per standard specifications |
| 12 | Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification. |
| 13 | Supplying and fixing of M.S grill of approved design for doors, windows and ventilators using necessary mild steel flats for inner and outer memebers which should be fixed to window frames inclusive of priming coat of best approved quality red oxide primer etc., complete complying with standard specifications. |
| 14 | Painting Two Coats on new Iron works with best synthetic enamel paint of approved colour and quality – 10m2. |
| 15 | Supplying and Planting of Neem tree sapling, Punjai, Naval trees planting, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.(PD-1166) |
| 16 | Supply and fixing of see saw 4 seater FRP seat to a height of 0.50 with 80mm dia leaver and 40mm top bar with M.S. pipe the seater is moulded plastic with heavy duty push bearing, the cost shall inclusive of all materials labours and fixing etc, complete as directed by the departmental officers. |
| 17 | Supplying and fixing of slide which is made of 40mm dia GI/MS pipe for lader side supports, slider side supports and hand rails provided with 20mm GI pipe for lader and slider portion made up of stainless steel sheets as directed by dept. officers including cost and conveyance of all materials and labour for fixing in position. |
| 18 | Supplying and fixing of two seaters swing which is made up of 40mm dia GI pipe for side supports and swing bars connecting and chairs are with stand the weight of 100 kgs with stainless steel plates for seating arrangements including cost and conveyence of all materials and labour charges for manufacturing and fixing in position as directed by dept, officers, etc. complete |
| 19 | Supplying, erecting and Fixing of 3 seater Granite seating bench. L shaped bases support in natural cement color of suitable size, as per standard specification. Complete (Size 2m x 0.45m x 0.75m and leg size 0.60m x 0.60m x 0.10m) |
| 20 | Investigation charges for Geophysical survey for locating the bore well including cost of all labour charges etc., complete as per standard specification. |
| 21 | Drilling 150mm deep vertical bore well in all clause of soils /hard rock area including all transportation charges of rigid and labour charges etc complete |
| 22 | Supply and deliveryof 180m PVC casing pipe including cost and conveyance of all meterials to site etccomplete |
| 23 | Wiring with 2x1.50 Sqmm (22/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100 V Grade in suitable PV C rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A F.T.Switch with painting of suitable colourful Open PV C light point ( For electronic regulator ) (5 points per coil) SD-18 |
| 24 | Wiring with 2x1.50 Sqmm (22/0.3) PVC insulated unsheathed Cu. Conductor of 1100 V Grade in suitable PV C rigid pipe on wall and ceiling with PVC accessories with 150 x 100 x 113mm TW switch box for 5A 3 pin non inter locking CS Plug with painting of suitable colour with continuous earth wise connection of 14 SWG TO and with TCwire for open PVC Plug Point.SD-36 |
| 25 | Supply and fixing of16 Amps DP Switch metal clad of 500 V with fuse and neutral (Side Handle) on suitable TW Box PWD Earthing SD-141 |
| 26 | Supply and Delivery of 1.00 HP wet type submersiblepump set 50lpmX40m head,confirming to IS 8034/89 with ISI marking along with 2.5 sq mm. cable (to 5m lengh) suitable for installation in 150 mm dia bore including Transportation charges etc., complete |
| 27 | Supply and delivery of 1.00 HP panel board suitable for above pump set with all accessories as per IE rules with Is specifationect., complete |
| 28 | Supply anddelivery of 63mm HDPE hose including cost and conveyanceof all materials to site and all labour charges etc., |
| 29 | Supply and delivery of 2.50 sqmm Copper Cableincluding cost and conveyanceof all materials to site and all labour charges etc., |
| 30 | Supplying and fixing of1\"\" Dia G.I. Service pipe including cost and conveyanceof all materials to site and all labour charges etc., |
| 31 | Supply and fixing of32 Amps fuse carrierincluding cost and conveyanceof all materials to site and all labour charges etc., |
| 32 | Supply and fixing of18Watts Power saver light fittingincluding cost and conveyanceof all materials to site and all labour charges etc., |
| 33 | Supply and delivery of 1000 litres HDPE Tankincluding cost and conveyanceof all labour charges etc, complete |
| 34 | Supply and runof 3 of 4 Sqmm (56/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V and grade in suitable heavy gauge M.S. Conduit pipe on wall and ceiling with continued earth wire connection of 14 SWG TC wirewith painting of suitable colour.SD-47 |
| 35 | Labour charges for erection of 1 HP Submersible motor including cost of all charges etc, complete |
| 36 | Supplying, erecting and Fixing of Dust pin ment color of suitable size, as per standard specification. Complete |
AI Tender Summary
Tender Timeline
Feb 10, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 16, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 16, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender