Tender For E Tender For Furnishing Work And Other Works At Alappuzha, alappuzha-Kerala

E Tender For Furnishing Work And Other Works At Alappuzha , :E-Tender For Furnishing Work And Other Works At Alappuzha For More Details Refer Tender Documents , Banking Area:Glazed Door : Providing And Fixing Entrance Door Using 12 Mm Toughned Glass Including Floor Springswith All Necessary Patches And Glass To Glass Lock Round Type (W/O Cut Out) Patches For Hanging The Toughned Glass ,Etc Complete. The Door Should Have Ss H-Type (25X425mm)Door Handles On Both Sides. All Edges Of The Glass To Be Polished And Provide Rubber Beading,The Emblem And Sticker Works Are As Per The Detailed Drawing. , Frameless Glazing:-Providing And Fixing Frame Less Glazing Using 12 Mmtoughned Glass With All Necessary Patches For Hanging The Toughned Glass As Per Detailed Drawing.All Edges Of The Glass To Be Polished, The Emblem And Sticker Works Are As Per The Detailed Drawing. The Rate Inclusive Of Cost And Conveyance Of All Materials To Site, Lead, Lift And Labour Charges For Erection, , Full Height Partition Both Side Lamination:-Providingfull Height Partitions With Hard Woodframes Of Size 5 X 5 Cm Vertically And Horizontally At 60 Cms Spacing, Or At Closer Intervals As Per Site Conditions, 6 Mmbwr 303 Grade Ply And 1 Mm Laminate (In Two Colours As Per Design) Of Approved Makeon Both Sides Of Partition. Necessary Holes Must Be Made In The Frame Sections To Run The Wires ,Computer Cables Wherever Necessary. Similarly Necessary Cutting To Be Made In The Plywood Surface To Fix Switch Boxes Of Electrical, Telephone Sockets,Computer Information Outlets Etc. (Measurement Of Payment Only Up To Bottom Of False Ceiling. Main Wooden Frame Section Of Partition Will Go Up To The Bottom Of Rcc Slab) , Half Glazed And Half Panelled Full Height Partition:-Providing Full Height Partitions With Hard Woodframes Of Size 5 X 5 Cm Vertically And Horizontally At 60 Cms Spacing, Or At Closer Intervals As Per Site Conditions, 6 Mm Bwr 303 Grade Ply And 1 Mm Laminate (Incolours As Per Design) On Both Sides Upto100 Cms High, Glazing From +100 To 210 Cms Level With 12 Mmbevelled Glass With Emblem And Sticker Works And Door.Glazing To Be In Big Panels As Per Design Wherever Required.Glass To Be Fixed With Polished Decorative Teak Wood Beadings.Necessary Holes Must Be Made In The Frame Sections To Run The Wires ,Computer Cables Wherever Necessary. Similarly Necessary Cutting To Be Made In The Plywood Surface To Fix Switch Boxes Of Electrical, Telephone Sockets,Computer Information Outlets Etc. (Measurment For Payment Only Up To Bottom Of False Ceiling. Main Section Of Partition Will Go Up To The Bottom Of Rcc Slab) , Hollow Core Drywall Partition:-Providing & Fixing Approved Make Hollow Core Drywall System Using 51Mm Wall Framing Systems As Core With 9Mm Thick Fibre Cement Boards Fixed According To Company Specifications Including Additional Frames For Fixing Doors. The Partition Should Withstand Its Weight. The Joints Shall Befinished With Putty To Appear Jointless. The Partition Shall Be Finished With Good Quality A Coat Of Primer 2 Coatpainting Etc.Complete. The Partition Shall Be Extended Upto True Ceiling Or Bottom Of Beam. , Low Height Partition:Providing And Fixing 120 Cms High Partition With Wooden Frame Of Size 5 X 5 Cm Vertically And Horizontally At 60 Cms Spacing, Or At Closer Intervals As Per Site Conditions.6 Mmbwr 303 Grade Ply Wood And 1 Mm Laminate (In 3 Colours) On Both Sides Upto + 90 Cms Level, 12 Mm Plain Glass With Slits,Etching And Edge Polishing From + 90 To + 120 Cms Level, .Glass To Be Fixed With Polished Wood Beadings. Necessary Provisionfor Electrical Switches May Be Provided. , Front Glass:- Providing And Fixing12 Mm Plain Glass Withedge Polishing. Glass To Be Fixed With Polished Wood Beadings.The Emblem And Sticker Works Are As Per The Detailed Drawing. , Single Window Counter Partition:-Providing Partitions For Cash Cabins With 5 X 5 Cms Size Hardwood Frames Vertically And Horizontally At 60 Cms Spacing, Or At Closer Intervals As Per Site Conditions, 6 Mm Bwr 303 Grade Ply And 1 Mm Laminate (In 3 Colours As Per Design) On Both Sides Upto 0 To 90Cm Height, Glazing From +90 To +180 Cms Level With 12 Mm Glass With Etching And Edge Polished Grooves, Access Doors Wherever Required In Matching Pattern With Hardwood Frames, Glazing To Be In Big Panels As Per Design.Necessary Holes Must Be Made In The Frame Sections To Run The Wires ,Computer Cables Wherever Necessary. Similarly Necessary Cutting To Be Made In The Plywood Surface To Fix Switch Boxes Of Electrical, Telephone Sockets,Computer Information Outlets Etc.Glass To Be Fixed With Polishedwood Beadings.Voucher Tray Of Size 15 X 25 X 5 Cm With 19 Mm Bwr 303 Grad Ply, 1 Mm Laminate, Wooden Lipping Etc. To Be Given For Each Cash Cabin , Semi Glazed Flush Doors With Both Side Mica:-Providing And Fixing 30 Mm Thick Single Leaf Solid Core And Resin Bonded Flush Door Water Proof Quality With 1 Mm Thick Lamination On Both Sidewith 12Mm Glass And Etching Including External Wooden Lipping All Round The Shutters, All As Per Drawing And Instruction. The Doors And Lamination Of Approved Make, Colour And Design Including All Best Quality Hardware, Brass Hinges,Mortice Lock With Cylindrical Lock, 7.5X1cm Size Hard Wood Skirtingetc;. Complete. , Semi Glazed Aluminium Door : Providing And Fixingdoor Using 10 Mm Glass And Particle Board. 100X40x2.4Mm (1.867Kg/M) Aluminium Section On 4 Side And Middle Up To 120Cm Height Including All Best Quality Hardware,Ss Tower Bolt, Ss Hinges, Mortise Lock,Powder Coated Aluminium Handle Fixed To The Frame For All Door Etc;. Complete , Wicket Doors With Both Side Mica 75 Cm Height:- Providing And Fixing 30 Mm Thick Single Leaf Solid Core And Resin Bonded Flush Door Water Proof Quality With 1 Mm Thick Lamination On Both Sideexternal Wooden Lipping All Round The Shutters, All As Per Drawing And Instruction. The Doors And Lamination Of Approved Make, Colour And Design Including All Best Quality Hardware, Ss Tower Bolt, Ss Hinges, Locketc;. Complete. , Clerical Counter:-Providing Table Type Clerical Counters 75 Cms Wide, 75 Cms Height, With Table Top, ,Vertical Dividers On Both Sides Of Drawer Units And Between Counter Seats All In 19 Mm Bwr 303 Grade Plywood.5X3 Cm Wooden Frame To Be Given Horizontally Below Inner Edge Of Counter Top For The Entire Length Of The Counter. 2 Dia Ss Pipe To Be Provided As Footrest. And Necessary Plywood Frame Work For Drawer Units To Be Given.Each Seat (About 150 Cm To 165 Cm Wide) To Have Key Board Tray And Wire Manager, One Drawer And One Storage Spacewith Godrej Make Multi Latch Locks,Recessed Handle(Shutter Handle -Aluminium 3012 Square) (Ebco/Eqlt). Key Board Tray With 19 Mm Bwr 303 Grade Ply And 1 Mm Laminate Etc. Drawers To Have Ebco Brand Telescopic Drawer Slides.Counter Top To Be Finished With 1Mm Thick Laminate Of Approved Colour And 8Mm Thickglass . All External Surfaces 1 Mm Laminate Finish And Internal Surfaces Finished With Two Coats Of Enamel Paint Over Two Coat Of Primer & One Coats Of Putty.Front Vertical Side Of Counter To Be Provided With Two Coloured Lamination As Per Design Etc. Complete. 10Mm Thickwooden Lipping For Allexposed Plywood Edges. , Single Window Counter:- Providing Single Window Counters 90 Cms Wide, 113 Cms Height, Ledger Top 90 Cm Width, Transaction Top 60 Cms Width, Vertical Dividers On Both Side Of Drawer Units And Between Counter Seats All In 19 Mm Bwr 303 Grade Plywood.5X3 Cm Wooden Frame To Be Given Horizontally Below Inner Edge Of Counter Top For The Entire Length Of The Counter.Providing 10Mm Thickwooden Lipping For All Plywood Edges. 2 Dia Ss Pipe To Be Provided As Footrest.And Necessary Plywood Frame Work For Drawer Units To Be Given.The Drawer Units Shall Have Separators Made Of 6Mm Plywood Painted With Enamel After Applying A Smooth Coat Of Putty To Store Different Denominations Of Currency.Each Seat (About 150 Cm To 165 Cm Wide) To Have Key Board Tray And Wire Manager,Recessed Handle (Shutter Handle -Aluminium 3012 Square), Key Board Tray With 19 Mm Bwr 303 Grade Ply And 1 Mm Laminate Etc. Ledger Top & Transaction Top To Be Finished With 1 Mm Laminate And 8Mm Thickglass.Front Vertical Side Of Counter To Be Provided With Two Coloured Lamination As Per Design.All Internal Surfaces Painted With Two Coat Of Primer, One Coat Putty & Two Coats Of Enamel Paint. , False Ceiling:-Providing Seamless False Ceiling With Gi Frame Work And 12.5 Mm Thick Gypsum Board Sheets, As Per Standard Specifications Of Approved Make For Horizontal And Vertical Surfaces Including Providing Cutouts For Light Fittings, Painting With 2 Coats Of Plastic Emulsion Paint Over Primer And Putty Etc. Complete , Cornice: Providing Moulded Plaster Of Paris Cornice Having Size 10 X 5 Cms Including Painting , Tables: Providing Table With 60 Cms Wide, 75 Cms Height, With Table Top,5X3 Cm Wooden Frame To Be Given Horizontally Below Inner Edge Of Counter Top For The Entire Length Of The Counter. Providing 10Mm Thickwooden Lipping For All Plywood Edges. Wooden Foot Rest Of 7.5 X 3 Cm Size And Necessary Plywood Frame Work For Drawer Units To Be Given.Each Seat (About 150 Cm To 165 Cm Wide) To Have Key Board Tray And Wire Manager, One Drawer And One Storage Spacewith Godrej Make Multi Latch Locks,Recessed Handle (Shutter Handle -Aluminium 3012 Square) (Ebco/Eqlt).Key Board Tray With 19 Mm Bwr 303 Grade Ply And 1 Mm Laminate Etc.Top Of The Table Should Be With 1Mm Laminate And 8Mm Glass. Drawers To Have Ebco Brand Telescopic Drawer Slides.Counter Top Andall External Surfaces Finished With 1 Mm Laminate And Internal Surfaces Finished With Two Coat Of Primer & One Coats Of Putty & Two Coats Of Enamel Paint.Front Vertical Side Of Counter To Be Provided With Two Coloured Lamination As Per Design Etc. Complete.Table Of Size 200X 80 Cms: With 3 Hard Wood Drawers As Detailed Above (Without Side Unit) , Table Of Size 120 X 75 Cms : With 1 Drawer And 1 Storage Space As Detailed Above (Without Side Unit) , Side Unit For Table:- Providing Table Side Unitwith 19Mm Bwr 303 Grade Ply For Top,Intermediate Shelf,Three Vertical Sides, Sliding Doorsand 9 Mm Ply Wood For Rear Side.All External Surfaces Andtop Including Rear Side With 1 Mm Laminate Finish , All Fixtures, Godrej Locks Nylon Bushes,Recessed Handle (Shutter Handle -Aluminium 3012 )(Ebco/Eqlt) , Wooden Lippingsetc. Complete.All Internal Surfaces Finished Withtwo Coat Of Primer & One Coats Of Putty Over Two Coats Of Enamel Paint. Size :100X45x75 Cm , Writing Ledge / Cheque Drop Box / Suggestion Box : Supply/ Installing Wall Mounted Writing Desk, Cheque Drop Box, Suggestion Box As Per Detailed Drawing. All Fixtures, Godrej Locks Nylon Bushes,Recessed Handle (Shutter Handle -Aluminium 3512 ) (Ebco/Eqlt) , Wooden Lippingsetc. Outer Sides Shall Be Laminated And Inner Sides Shall Be Painted Withtwo Coats Of Enamel Paint Over A Coat Of Primer & Two Coats Of Putty. , Door Closer : Supplying And Fixing Everite Make Hydraulic Door Closer Including Cost And Conveyance Of All Materials, Labour Charges For Fixing, Etc. Complete As Per Directions Of Site Incharge. , Pantry Counter :- Providing Table Type Pantry Counters 60 Cms Wide, 75 Cms Height, With Table Top, Front Apron, Vertical Dividers19 Mm Bwr 303 Grade Plywood.5X3 Cm Wooden Frame To Be Given Horizontally Below Inner Edge Of Counter Top For The Entire Length Of The Counter.Wooden Foot Rest Of 7.5 X 3 Cm Size .Counter Top To Be Provided With 20 Mm Edge Bevelled And Edge Polished Granite (Jet Black). All External Surfaces 1 Mm Laminate Finish And Internal Surfaces With Enamel Finish. 10Mm Thick Beach Wood Lipping For All Plywood Edges. , Full Ht./Low Ht. Laminated Storage -Fabricating And Fixing 45Cm Deep Storage Unitconstructed Out Of 19Mm. Thk Bwr.Ply Sides And 19Mm Thick Shutters-Side Hung With 1Mm Laminate, 12Mm.Thk Hhw Lipped Bwr.Ply Bottom With Ss Hinges. Exposed Edges Should Be Provided With Wooden Lipping. All External Surfaces Andtop Including Rear Side With 1 Mm Laminate Finish , All Fixtures, Godrej Locks, Recessed Handle(Shutter Handle -Aluminium 3512 ) (Ebco/Eqlt),Nylon Bushes, Wooden Lippingsetc. Complete.All Internal Surfaces Finished Withtwo Coat Of Primer & One Coats Of Putty Over Two Coats Of Enamel Paint. , Stage Platform: Providing 30 Cm Height Box 50Mm X 50Mm Gi Tubular Framework For Outer Edges And Intermediate Sections Of 32Mm X 32Mm X 2Mm Size. This Shall Be Suitably Supported On 50Mm X 50Mm X 2.5Mm Gi Sections At Intervals. The Framework And19mm Ply Shall Be Covered With Laminated Wooden Flooring Of Banks Approved Design Basic Rate Of Wooden Flooring Rs.145/Sqft(Make: Pergo/Welspun) , Roller Blinds : Supplying And Providing Roller Blinds With Smooth Operations Using Manual And Clutch Roller Controlled By A Continuous Cord Loop . The Blind Is To Be Fixed Within The Window Opening .The Fabric Shall Be Of Sunscreening Quality And Of Approved Shade .Top Roller And Bottom Roller Of Powder Coated Aluminium ( Make Marvel/ Vista) , Notice Board : Providing And Fixing To The Wall, Notice Board Of Size 90Cm X120cm, With 18Mm Bwr Grade Plywood As Base With 1Mm Blue Colour Laminate Pasted On To It On Both Faces And Edge Banded With Matching Colour. The Board Shall Have Sandwich Panels Of Different Sizes As Shown In The Drawings. The Panels Shall Be Made Of 2 Nos 6Mm Thk Acrylic Boards Fixed To The Board Using 12Mm Glass Studs,Labour Charge Etc

Sr No	CorrigendumDate	Corrignedum	CorrigendumType	NewSubmissionDate
1	16-Feb-2024	DATE EXTENSION	Date	17-02-2024

INR 2950 /-

INR 37054.0 /-

INR 14.82 Lakhs /-

Name of Work:E-TENDER FOR FURNISHING WORK AND OTHER WORKS AT ALAPPUZHA

Sl. No.	Item Description
1	:E-TENDER FOR FURNISHING WORK AND OTHER WORKS AT ALAPPUZHA For more details refer tender documents
2	Banking Area:Glazed Door : Providing and fixing entrance door using 12 mm toughned glass including floor springswith all necessary patches and Glass to glass lock round type (w/o cut out) patches for hanging the toughned glass ,etc complete. The door should have SS "H"-type (25x425mm)door handles on both sides. All Edges of the glass to be polished and Provide Rubber beading,The emblem and sticker works are as per the detailed drawing.
3	Frameless Glazing:-Providing and fixing frame less glazing using 12 mmtoughned glass with all necessary patches for hanging the toughned glass as per detailed drawing.All Edges of the glass to be polished, The emblem and sticker works are as per the detailed drawing. The rate inclusive of cost and conveyance of all materials to site, lead, lift and labour charges for erection,
4	Full Height Partition Both Side Lamination:-Providingfull height partitions with hard woodframes of size 5 x 5 cm vertically and horizontally at 60 cms spacing, or at closer intervals as per site conditions, 6 mmBWR 303 grade ply and 1 mm laminate (in two colours as per design) of approved makeon both sides of partition. Necessary holes must be made in the frame sections to run the wires ,computer cables wherever necessary. Similarly necessary cutting to be made in the plywood surface to fix switch boxes of electrical, telephone sockets,computer information outlets etc. (Measurement of payment only up to bottom of false ceiling. Main wooden frame section of partition will go up to the bottom of RCC slab)
5	Half glazed and half panelled full height partition:-Providing full height partitions with hard woodframes of size 5 x 5 cm vertically and horizontally at 60 cms spacing, or at closer intervals as per site conditions, 6 mm BWR 303 grade ply and 1 mm laminate (incolours as per design) on both sides upto100 cms high, glazing from +100 to 210 cms level with 12 mmbevelled glass with emblem and sticker works and door.Glazing to be in big panels as per design wherever required.Glass to be fixed with polished decorative teak wood beadings.Necessary holes must be made in the frame sections to run the wires ,computer cables wherever necessary. Similarly necessary cutting to be made in the plywood surface to fix switch boxes of electrical, telephone sockets,computer information outlets etc. (Measurment for payment only up to bottom of false ceiling. Main section of partition will go up to the bottom of RCC slab)
6	Hollow Core Drywall partition:-Providing & fixing approved make hollow core drywall system using 51mm wall framing systems as core with 9mm thick Fibre cement boards fixed according to company specifications including additional frames for fixing doors. The partition should withstand its weight. The joints shall befinished with putty to appear jointless. The partition shall be finished with good quality a coat of primer 2 coatpainting etc.complete. The partition shall be extended upto true ceiling or bottom of beam.
7	Low height partition:Providing and fixing 120 cms high partition with wooden frame of size 5 x 5 cm vertically and horizontally at 60 cms spacing, or at closer intervals as per site conditions.6 mmBWR 303 grade ply wood and 1 mm laminate (in 3 colours) on both sides upto + 90 cms level, 12 mm plain glass with slits,etching and edge polishing from + 90 to + 120 cms level, .Glass to be fixed with polished wood beadings. Necessary provisionfor electrical switches may be provided.
8	Front Glass:- Providing and fixing12 mm plain glass withedge polishing. Glass to be fixed with polished wood beadings.The emblem and sticker works are as per the detailed drawing.
9	Single Window Counter partition:-Providing partitions for cash cabins with 5 x 5 cms size hardwood frames vertically and horizontally at 60 cms spacing, or at closer intervals as per site conditions, 6 mm BWR 303 grade ply and 1 mm laminate (in 3 colours as per design) on both sides upto 0 to 90cm height, glazing from +90 to +180 cms level with 12 mm glass with etching and edge polished grooves, access doors wherever required in matching pattern with hardwood frames, Glazing to be in big panels as per design.Necessary holes must be made in the frame sections to run the wires ,computer cables wherever necessary. Similarly necessary cutting to be made in the plywood surface to fix switch boxes of electrical, telephone sockets,computer information outlets etc.Glass to be fixed with polishedwood beadings.Voucher tray of size 15 x 25 x 5 cm with 19 mm BWR 303 grad ply, 1 mm laminate, wooden lipping etc. to be given for each cash cabin
10	Semi glazed Flush doors with Both side Mica:-Providing and fixing 30 mm thick single leaf solid core and resin bonded flush door water proof quality with 1 mm thick lamination on both sidewith 12mm glass and etching including external wooden lipping all round the shutters, all as per drawing and instruction. the doors and lamination of approved make, colour and design including all best quality hardware, brass hinges,mortice lock with cylindrical lock, 7.5x1cm size hard wood skirtingetc;. complete.
11	Semi glazed Aluminium door : Providing and fixingdoor using 10 mm glass and Particle board. 100x40x2.4mm (1.867kg/m) aluminium section on 4 side and middle up to 120cm height including all best quality hardware,SS Tower bolt, SS hinges, Mortise lock,powder coated Aluminium handle fixed to the frame for All door etc;. complete
12	Wicket doors with Both side Mica 75 cm Height:- Providing and fixing 30 mm thick single leaf solid core and resin bonded flush door water proof quality with 1 mm thick lamination on both sideexternal wooden lipping all round the shutters, all as per drawing and instruction. the doors and lamination of approved make, colour and design including all best quality hardware, SS Tower bolt, SS hinges, locketc;. complete.
13	Clerical Counter:-Providing table type clerical counters 75 cms wide, 75 cms height, with table top, ,vertical dividers on both sides of drawer units and between counter seats all in 19 mm BWR 303 Grade plywood.5x3 cm wooden frame to be given horizontally below inner edge of counter top for the entire length of the counter. 2" dia SS pipe to be provided as footrest. and necessary plywood frame work for drawer units to be given.Each seat (about 150 cm to 165 cm wide) to have key board tray and wire manager, One drawer and one storage spacewith Godrej make multi latch locks,Recessed Handle(Shutter Handle -Aluminium 3012 Square) (Ebco/eqlt). Key board tray with 19 mm BWR 303 Grade ply and 1 mm laminate etc. Drawers to have "Ebco" brand telescopic drawer slides.Counter top to be finished with 1mm thick laminate of approved colour and 8mm thickglass . All external surfaces 1 mm laminate finish and internal surfaces finished with two coats of enamel paint over two coat of primer & one coats of putty.Front vertical side of counter to be provided with two coloured lamination as per design etc. complete. 10mm thickwooden lipping for allexposed plywood edges.
14	Single window counter:- Providing single window counters 90 cms wide, 113 cms height, ledger top 90 cm width, transaction top 60 cms width, vertical dividers on both side of drawer units and between counter seats all in 19 mm BWR 303 Grade plywood.5x3 cm wooden frame to be given horizontally below inner edge of counter top for the entire length of the counter.providing 10mm thickwooden lipping for all plywood edges. 2" dia SS pipe to be provided as footrest.and necessary plywood frame work for drawer units to be given."The drawer units shall have separators made of 6mm plywood painted with enamel after applying a smooth coat of putty to store different denominations of currency."Each seat (about 150 cm to 165 cm wide) to have key board tray and wire manager,Recessed Handle (Shutter Handle -Aluminium 3012 Square), Key board tray with 19 mm BWR 303 Grade ply and 1 mm laminate etc. Ledger top & Transaction top to be finished with 1 mm laminate and 8mm thickglass.Front vertical side of counter to be provided with two coloured lamination as per design.All internal surfaces painted with two coat of primer, one coat putty & two coats of enamel paint.
15	False ceiling:-Providing seamless false ceiling with GI frame work and 12.5 mm thick gypsum board sheets, as per standard specifications of Approved make for horizontal and vertical surfaces including providing cutouts for light fittings, painting with 2 coats of plastic emulsion paint over primer and putty etc. complete
16	Cornice: Providing moulded plaster of paris cornice having size 10 x 5 cms including painting
17	Tables: Providing table with 60 cms wide, 75 cms height, with table top,5x3 cm wooden frame to be given horizontally below inner edge of counter top for the entire length of the counter. Providing 10mm thickwooden lipping for all plywood edges. Wooden foot rest of 7.5 x 3 cm size and necessary plywood frame work for drawer units to be given.Each seat (about 150 cm to 165 cm wide) to have key board tray and wire manager, One drawer and one storage spacewith Godrej make multi latch locks,Recessed handle (Shutter Handle -Aluminium 3012 Square) (Ebco/eqlt).Key board tray with 19 mm BWR 303 Grade ply and 1 mm laminate etc.Top of the table should be with 1mm laminate and 8mm glass. Drawers to have "Ebco" brand telescopic drawer slides.Counter top andall external surfaces finished with 1 mm laminate and internal surfaces finished with two coat of primer & one coats of putty & two coats of enamel paint.Front vertical side of counter to be provided with two coloured lamination as per design etc. complete.Table of size 200x 80 cms: with 3 hard wood drawers as detailed above (without side unit)
18	Table of size 120 x 75 cms : with 1 drawer and 1 storage space as detailed above (without side unit)
19	Side unit for table:- Providing table side unitwith 19mm BWR 303 grade ply for top,intermediate shelf,three vertical sides, sliding doorsand 9 mm ply wood for rear side.All external surfaces andtop including rear side with 1 mm laminate finish , all fixtures, Godrej locks nylon bushes,Recessed handle (Shutter Handle -Aluminium 3012 )(Ebco/eqlt) , wooden lippingsetc. complete.All internal surfaces finished withtwo coat of primer & one coats of putty over two coats of enamel paint. size :100x45x75 cm
20	Writing ledge / cheque drop box / suggestion box : Supply/ installing wall mounted writing desk, cheque drop box, suggestion box as per detailed drawing. all fixtures, Godrej locks nylon bushes,Recessed handle (Shutter Handle -Aluminium 3512 ) (Ebco/eqlt) , wooden lippingsetc. Outer sides shall be laminated and inner sides shall be painted withtwo coats of enamel paint over a coat of primer & two coats of putty.
21	Door Closer : Supplying and fixing "everite" make hydraulic door closer including cost and conveyance of all materials, labour charges for fixing, etc. complete as per directions of site incharge.
22	Pantry Counter :- Providing table type pantry counters 60 cms wide, 75 cms height, with table top, front apron, vertical dividers19 mm BWR 303 grade plywood.5x3 cm wooden frame to be given horizontally below inner edge of counter top for the entire length of the counter.Wooden foot rest of 7.5 x 3 cm size .Counter top to be provided with 20 mm edge bevelled and edge polished granite (jet black). All external surfaces 1 mm laminate finish and internal surfaces with enamel finish. 10mm thick beach wood lipping for all plywood edges.
23	Full Ht./Low Ht. Laminated Storage -Fabricating and fixing 45cm deep storage unitconstructed out of 19mm. Thk BWR.ply sides and 19mm thick shutters-side hung with 1mm laminate, 12mm.thk hHW lipped BWR.ply bottom with SS Hinges. Exposed edges should be provided with wooden lipping. All external surfaces andtop including rear side with 1 mm laminate finish , all fixtures, Godrej locks, Recessed handle(Shutter Handle -Aluminium 3512 ) (Ebco/eqlt),nylon bushes, wooden lippingsetc. complete.All internal surfaces finished withtwo coat of primer & one coats of putty over two coats of enamel paint.
24	Stage Platform: Providing 30 cm height Box 50mm x 50mm GI tubular framework for outer edges and intermediate sections of 32mm x 32mm x 2mm size. This shall be suitably supported on 50mm x 50mm x 2.5mm GI sections at intervals. The framework and19mm ply shall be covered with laminated wooden flooring of Banks approved design Basic rate of wooden flooring Rs.145/sqft(make: Pergo/Welspun)
25	Roller Blinds : Supplying and providing roller blinds with smooth operations using manual and clutch roller controlled by a continuous cord loop . The blind is to be fixed within the window opening .The fabric shall be of sunscreening quality and of approved shade .Top Roller and bottom roller of powder coated Aluminium ( Make Marvel/ Vista)
26	Notice Board : Providing and fixing to the wall, notice board of size 90cm x120cm, with 18mm BWR grade plywood as base with 1mm Blue colour laminate pasted on to it on both faces and edge banded with matching colour. The board shall have sandwich panels of different sizes as shown in the drawings. The panels shall be made of 2 nos 6mm thk acrylic boards fixed to the board using 12mm Glass studs,labour charge etc