Tender For Construction Of Extension To Goliath Crane Rails Of Chichdoh Barrage, To Keep Goliath Crane In Switch Yard For Safety
Tender Value
86.20 Lakhs
Estimated cost
Bid Submission
22 Feb 2024
0 days left
EMD
86300
Bank guarantee accepted
Document Fee
2360
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
chamorshi → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Extension To Goliath Crane Rails Of Chichdoh Barrage, To Keep Goliath Crane In Switch Yard For Safety
BOQ
| Sl. No. | Item Description |
| 1 | Item No. 1:- Dismantling RCC works and removing the stuff with all leads & lifts including stacking the material as directed with all leads & lifts etc complete at contractors cost. |
| 2 | Item No. 2:- Excavation in all kinds of soil including boulders upto 0.6 m diameter (0.113 cum) for canal, seating of embankment, filter drains / catch water drains etc., and placing the excavated stuff neatly in dump area or for formation of service road / embankment as directed including cost of all materials, machinery, labour, dressing bed and sides to required level and profile etc., complete with all leads & lifts etc. complete. |
| 3 | Item No. 3:- Providing & laying Rubble soling below foundation in layers including fillingwith rubble chips murum etc. complete. |
| 4 | Item No. 4:- Providing and laying in situ C.C. of verious grades trap/granite/quartzite/gneiss metal including necessary bailing out water, including plywood/steel form work, steel centering, compaction by vibrating, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughning the surface if special finish is to be provided, curing and incuding dewatering by pump etc. complete. The C.M. 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpoline etc. (wooden centering /formwork will not be allowed). (excluding royalty charges)A) P.C.C of M-10 (40 MSA) |
| 5 | B) R.C.C of M-25 (20 MSA) for RCC Raft & Beams |
| 6 | Item No. 5:- Cutting, bending, hooking, laying in position and tying M.S./HYSD/TMT bars for reinforcement of R.C.C. work as per detailed drawing etc. complete. |
| 7 | Item No. 6:- Providing and filling in sand in trenches with sand of approved quality including watering and compaction as directed etc complete |
| 8 | Item No. 7 :- Providing and Laying factory made coloured chamfered edgeCement concrete grass paver blocks of required strength,thickness& size/ shape ,made by table vibratory method using PU mould, laid in required colour& pattern over 50 mm thick compacted bed of fine fine aggregate(natural sand /crushed sand VSI grade finely washed etc.),compacting and properembedding /laying of interlocking paver block sin to the fine aggregate (natural sand/crushed sand VSI grade finely washed etc.)bedding layer through vibratory compaction by using plate vibrator,filling the joint swith fine aggregate (natural sand/crushed sand VSI grade finely washed etc.)and cutting of paver blocks as per required size and pattern,finishing and sweeping extra fine aggregate (natural sand/crushed sand VSI grade finely washed etc.)and complete as per manufacturer spsecifications& direction of Engineer-in- Charge .60 mm thick CC paver block of M-35 grade concrete with approved colour and design & pattern. |
| 9 | Item No. 8 :- GOLIATHRAIL ARRANGEMENT - Manufacturing, Erection, Commissioning & Testing Manufacturing with QAP, fabrication, erection, commissioning & testing of Railing arrangement for Goliath Crane. MS Material used shall conform to IS 2062. The Dimensions, shape and other requirements of Crane rail sections conform to IS 3443.Welding electrodes (AWS E6013 for MS to MS weld joints & E7016 for MS to rail weld joints). It includes all materials, Labour charges, machining and machinery charges, 1 km lead charges of transportation, loading and unloading charges of Gate parts at Site, Inspection and Quality control charges, Sand blasting, Painting with one coat of Zinc rich primer on dry film to give total dry film thickness 70 +/- 5 microns as per IS 14177 |
AI Tender Summary
Tender Timeline
Feb 08, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 22, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 23, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender