Tender For To Do The Fabrication Work With Lobour Workers, sangamner-Maharashtra

Tender For To Do The Fabrication Work With Lobour Workers- 1 Providing And Erecting Chain Link Fencing 1.6 M. Height With G.I. Chain Link Of Size 50 X50 Mm, 8 Gauge Thick And Fixed 75 Mm Above Ground Level On Vertical M.S. Angles Of 40 X 40 X 6 Mm Size, Includind Excavating Pits For Foundation And Embedded In C.C. Block Of 1:4:8 Mix Of Size 450 X 450 X 670 Mm. At 1.75 M. C / C With Iron Bar 16Mm Dia As Hold Fast Including Welding Link With Angle Frame At 30 Cm C / C With Nuts And Bolts And Horizontal M.S. Angles At Top And Bottom Of 25 X 25 X 5 Mm Size And Vertical M.S. Flat 35 X 5 Mm And 25 X 5 Mm Horizontal Including Cross Support Of 40 X 40 X 6 Mm Angles Both Side At Every Corner Or Bend Embedded In Concrete Blocks Of 1:4:8 Of Size 450 X 450 X 670 Mmincluding 3 Coats Of Oil Painting Etc. Complete 2 Providing And Fabricating Structural Steel Work In Rolled Sections Like Joists, Channels, Angles, Tees Etc. As Per Detailed Design And Drawings Or As Directed Includingcutting, Fabricating, Hoisting, Erecting, Fixing In Position Making Riveted / Bolted / Welded Connections Without Connecting Plates, Braces Etc. And Including One Coat Ofanticorrosive Paint And Over It Two Coats Of Oil Painting Of Approved Quality And Shade Etc. Complete. 3 Providing And Fixing Rolling Shutter Fabricated From Steel Laths Of Minimum Thickness 0.9Mm With Lock Plate Of 3.15 Mm Thickness Reinforced With 35 X 35 X 5 Mm Angle Sectionfitted With Sliding Bolts And Handles For Both Sides, Deep M.S. Channel Section Of Depth And Thickness Not Less Than 65 Mm And 3.15 Mm Respectively With Hold Fast Arrangements, M.S. Bracket Plate 300 X 300 X 3.15 Mm Minimum Size And Shape With Square Bar, Suspension Shaft Of Minimum 32 Mm Diameter, Hood Cover Of M.S. Sheet Not Less Than 0.9 Mm Thickness And Of Any Size At Top And Safety Devices Including Mechanical Gear Operation Arrangement Consisting Of Worm Gear Wheels And Worms Of High Grade Cast Iron Or Mild Steel And One Coat Of Red Lead Primer Etc. Complete. ( I.S. 62481979 ) ( Without Mechanical Gear ) 4 Providing And Fixing Of Colour Coated Zincaluminium ( R ) Az150 ( Min 150 Gms / Sq.Mt. Total On Each Side ) Profiled Sheets For Roofing. The Feed Material Is Manufactured Out Of Nominal 0.45 Mm Base Metal Thickness ( Bmt ) ( 0.5 Mm Tct ) , Hi-Strength Steel With Min.550 Mpa Yield Strength, Metallic Hot Dip Coatedwithaluminium-Zinc Alloy ( 55% Aluminiumm 43.4% Zinc 1.6% Silicon ) With Colorbond ( R ) Steelquality Super Durable Polyster Paint Coat ( With Inorganic Pigment ) . The Paint Shall Have A Total Coatingthickness Of Nominal 35 Mm, Comprising Of Nominal 25Mmexterior Coat On Top Surface And Nominal 10 Umreverse Coat On Back Surface. Profile Sheet Shall Have Nom. 950-1050 Mm Effective Cover Width And Nominal25-30 Mm Deep Ribs With Sublet Square Fluting In The Five Pan At Nominal 180-250 Mmcenter- To-Center. Theend Rib Shall Be Designed For Anti-Capacity Groove. And Return Leg. The Feed Material Should Have Coilmanufacturers Product Details Marked A Regular Interval. Including Fasteners With Min. Fastened With Min. 25 Um Zinc-Tin Alloy Coated, Hex Head, Self-Drilling Screw Etc. Complete. ( Weight Of Profile 4.52Kilogram / Square Metre ) 600 Mm Girth ( Surface Width ) . 5 Providing, Fabricating And Erecting At Site Of Work The Tubular Steel Structure ( Shed ) As Per Standard Design And Specifications Having Various Spans In Between Trusses And In Multiples Of Standard Length Of Bays As Specified As Per Standard Specifications, Inclusive Of Cost Of Steel Tubular Trusses, Tubular Columns Purlins, Tie Runners, Foundation Bolts, Base Plates, Nuts And Bolts, Welding Wherever Required Etc. As Per Detailed Drawing Inclusive Of One Coat Of Anticorrosive Paint And Two Coats Of Oil Painting Of Approved Quality And Shade Etc. Complete. Spec. One Number : As Directed By Engineer-In-Charge. 6 Providing And Fixing Mild Steel Grill Gate With Angle Iron Frame 65Mm X 65Mm X 10Mm With Iron Bars At150mm C / C And Diagonal Flats As Per The Detailed Drawing Including Hinges, Pivot Block Locking Arrangement, Welding Riveting And Oil Painting Of Three Coats Of Approved Shade Weight Of Gate 35 Kilogram / Smt 7 Excavation For Foundation In Earth, Soil Of All Types, Sand, Gravel And Soft Murum, Including Removing The Excavated Material Up To A Distance Of 50 M. Beyond The Building Area And Stacking And Spreading As Directed, Dewatering Preparing The Bed For The Foundation And Necessary Back Filling, Ramming, Watering, Including Shoring And Strutting Etc. Complete. ( Lift Up To 1.5 M ) By Mechanical Means. 8 Providing And Laying Cast In Situ / Ready Mix Cement Concrete In M20 Of Trap / Granite / Quartzite / Gneiss Metal For Bed Blocks, Foundation Blocks And Such Other Items Including Bailing Out Water, Steel Centering, Formwork, Laying / Pumping, Compacting, Roughening Them If Special Finish Is To Be Provided, Finishing Uneven And Honeycombed Surface And Curing Etc. Complete. The Cement Mortar 1:3 Plaster Is Considered For Rendering Uneven And Honeycombed Surface Only. Newly Laid Concrete Shall Be Covered By Gunny Bag, Plastic, Tarpaulin Etc. ( Wooden Centering Will Not Be Allowed. ) , With Fully Automatic Micro Processor Based Plc With Scada Enabled Reversible Drum Type Mixer / Concretebatch Mix Plant ( Pan Mixer ) Etc. Complete. With Fine Aggregate ( Crushed Sand Vsi Grade ) . 9 Providing And Erecting Y Type Barbed Wire Fencing With Seven Rows Of Wire With 2.45 Mm Dia G.I. Pipe ( Rezan / Concentideleted Ire 0.75 Mm Dia ) With Hot Dip And G.I. Coated Hooks As Per Drawing Supported On M.S. Angle 50 X 50 X 6 Mm At 2.5 Mtr. C / C Including Fixing And Fastening With Wire, Painting M.S. Angles With One Coat Of Red Lead Primer And Two Coat Of Oil Paint Etc. Complete. 10 Providing And Fixing N.H. / S.H. Route Marker Size 60 Cm X 45 Cm With One No. Direction Plate Of Size 30 Cmx 25 Cm Prepared On 16 Gauge M.S. Sheet Including Painting With One Coat Of Zinc Cromate Stoving Primer And Two Coats Each Of White And Green Back Ground And Back Side Gray Stove Enamelled, Bonded With Cut Out Of Red Retro Reflective Sheet Engineering Grade, Border / Letters / Numerals And Arrow, Coated With Non Pealable Crystal Clear Protective Transparent Coat Retaining 100% Reflection Including One Number Of M.S. Angle Iron Post Of Size 50 X 50 X 5 Mm Of 3.65 M. Long Inflated At Bottom Drilled On Top In One Piece Without Joint Painted With White And Black Bands Of 30 Cm. Fixing Board And Post With 4 Nos. Of High Strength G.I. Bolts And Nuts Of Size 10 Mm Dia. And 20 Mm Long Including All Taxes, Conveying, Fixing In Ground With Cement Concrete 1:4:8 Block Of 60 Cm X 60 Cm X 75 Cm Size As Directed By Engineer-In-Charge Etc. Complete. Mild Steel Route Marker With Engineering Grade. Complete. 11 Providing And Applying 2 Coats Of Alluminium Paint Of Approved Make To New Structural Steel Work Inbuildings And Workshops Including Scaffolding If Necessary, Cleaning And Preparing The Surface ( Excludingprimer Coat ) Etc. Complete. 12 Providing And Pesting Redium Letters. ( Rate As Per Quatation ) 13 Providing And Fixing Alluminium Acrelic Lighthning Work. ( Rate As Per Quatation ) 14 Repairing And Maintaining All Types Of Garden Toys ( Including Lathe Machine Work All Bearings Cones, All Nut Bolts, Grease, Welding And Cutting Work, All Types Of Pins And Its Locks, L Ankey Bolts ) ( Rate As Per Quotation. )

INR 2000 /-

INR 20000.0 /-

INR 20 Lakhs /-

Name of Work: ?????? ???? ?? ???? - ?? ????? ??????? ???????? ???????? ????????????? ???????????? ? ???? ???????????? ????.

Sl. No.	Item Description
1	Providing and erecting chain link fencing 1.6 M. height with G.I. chain link of size 50 x 50 mm, 8 gauge thick and fixed 75 mm above ground level on vertical M.S. Angles of 40 x 40 x 6 mm size, includind excavating pits for foundation and embedded in C.C. block of 1:4:8 mix of size 450 x 450 x 670 mm. at 1.75 M. c/c with iron bar 16mm dia as hold fast including welding link with angle frame at 30 cm c/c with nuts and bolts and horizontal M.S. Angles at top and bottom of 25 x 25 x 5 mm size and vertical M.S. flat 35 x 5 mm and 25 x 5 mm horizontal including cross support of 40 x 40 x 6 mm angles both side at every corner or bend embedded in concrete blocks of 1:4:8 of size 450 x 450 x 670 mm including 3 coats of oil painting etc. complete
2	Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.
3	Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (Without mechanical gear)
4	Providing and fixing of colour coated Zincaluminium( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness (BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated withAluminium-Zinc alloy (55% aluminiumm 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyster paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 mm, comprising of nominal 25mmexterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with sublet square fluting in the five pan at nominal 180-250 mmcenter- to-center. The end rib shall be designed for anti-capacity groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/Square Metre) 600 mm girth (Surface Width).
5	Providing, fabricating and erecting at site of work the tubular steel structure (shed) as per standard design and specifications having various spans in between trusses and in multiples of standard length of bays as specified as per standard specifications, inclusive of cost of steel tubular trusses, tubular columns purlins, tie runners, foundation bolts, base plates, nuts and bolts, welding wherever required etc. as per detailed drawing inclusive of one coat of anticorrosive paint and two coats of oil painting of approved quality and shade etc. complete. Spec. One Number : As directed by Engineer-in-charge.
6	Providing and fixing mild steel grill gate with angle iron frame 65mm x 65mm x 10mm with iron bars at 150mm C/C and diagonal flats as per the detailed drawing including hinges, pivot block locking arrangement, welding riveting and oil painting of three coats of approved shade Weight of gate 35 Kilogram/Smt
7	Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering preparing the bed for the foundation and necessary back filling, ramming, watering, including shoring and strutting etc. complete. (Lift up to 1.5 m) by mechanical means.
8	Providing and laying Cast in situ/Ready Mix cement concrete in M20 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade).
9	Providing and erecting Y type barbed wire fencing with seven rows of wire with 2.45 mm dia G.I. pipe ( Rezan/ concentiDeleted ire 0.75 mm dia ) with hot dip and G.I. coated hooks as per drawing supported on M.S. angle 50 x 50 x 6 mm at 2.5 mtr. c/c including fixing and fastening with wire, painting M.S. angles with one coat of red lead primer and two coat of oil paint etc. complete.
10	Providing and fixing N.H./ S.H. Route Marker size 60 cm x 45 cm with one No. direction plate of size 30 cm x 25 cm prepared on 16 gauge M.S. sheet including painting with one coat of zinc cromate stoving primer and two coats each of white and green back ground and back side gray stove enamelled, bonded with cut out of red Retro reflective sheet Engineering grade, border / letters / numerals and arrow, coated with non pealable crystal clear protective transparent coat retaining 100% reflection including one number of M.S. Angle iron post of size 50 x 50 x 5 mm of 3.65 m. long inflated at bottom drilled on top in one piece without joint painted with white and black bands of 30 cm. fixing board and post with 4 Nos. of high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size as directed by Engineer-in-charge etc. complete. Mild Steel Route Marker with Engineering Grade. Complete.
11	Providing and applying 2 coats of alluminium paint of approved make to new structural steel work in buildings and workshops including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat)etc. complete.
12	Providing and pesting redium letters. ( Rate as per quatation )
13	Providing and fixing Alluminium acrelic Lighthning work.( Rate as per quatation )
14	Repairing and Maintaining All types of Garden Toys ( Including Lathe machine work all bearings cones,all nut bolts, grease, welding and cutting work, all types of pins and its locks, L ankey bolts) ( Rate as per quotation. )