Paschimanchal Vidyut Vitran Nigam Limited has published Tender For Construction Work Of A New 11 Kb Underground Line To Issue 10 K40 Connection For The Nursery Developed In Salarpur Underpass By The Horticulture Department, Vaida, Under The Full Deposit Scheme In The Area Of Electricity Distribution Division. Submission Date for this Tender is 14-02-2024. Power Distribution Work Tenders in noida Uttar Pradesh. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | fo|qr forj.k [k.M & xzsVj uks,Mk ds {ks= esa iw.kZ tek ;kstuk ds vUrxZr m|ku foHkkx ;SMk }kjk lykjiqj v.Mjikl esa fodflr ulZjh gsrq 10 fd0ok0 la;kstu fuxZr djus ds fy, u;h 11 dsoh Hkwfexr ykbZu dk fuekZ.k dk;ZA |
2 | Safe carriage of following Centralised/stock material, from any of the Store Center of PVVNL to work siteincluding Loading from Store and safe unloading at site for Item No. 3 to 8 |
3 | 25KVA T/F 11/0.4KV |
4 | ST Pole 11 Mtr. Long |
5 | 11KV XLPE Cable 3x70sqmm |
6 | 11KV O/D Termination Kit suitable for 3x70sqmm Cable. |
7 | ACSR Weasel Conductor |
8 | Line Accessories ( 11KV Top, Dropper & T- Channel (100x50x2240mm) - 66 Kg., S/S Base Angle for T/F (75x75x6x2240mm) - 30Kg.,11KV Pin Insulator with Pin - 6 Nos.,etc.) or any other material releated to work etc.) |
9 | Supply and Errection of below Following material and Errection of above centralised material for completing the work as per RESPO. |
10 | The excavation of foundation pit in mix soil/normal soil/soft soil & hard rock as per site condition and its back filling and leveling etc. The size of the pit will be (750x450)mm and having depth of 1/6th of the full length of the support. Erection of support, complete with providing & fixing of all G.I.Clamps size of 75x10mm, 65x8mm, G.I.Nut bolt & washer, P.G.Clamp, Stone Pad, Al. Binding wire, "E" bracket 75x10mm, and other accessories as per drawing. The work includes carriage and handling of supports from sectional store to pit site as well as any fabrication work if required & fixing of cross bracing sets 4.3mtr long, from G.I.Angle 65x65x6mm. The work includes cutting holes and providing G.I.Bolt of 16x40mm size, in the middle of the cross bracing with 01No. spring washer of proper size as per drawing/ as per schedule. Double Pole Structures (a)ST - 11 Mtr. Long Pole. |
11 | Grouting of supports in CC 1:3:6 (Cement, sand & 20mm stone grift). Grouting will be done in the block of size (450x450)mm x1/6th of full length of the support, upto ground level, 300mm plinth above the ground level with C.C. 1:3:6 (Cement, Course sand and Stone grift) with muffing as per RESPO. Work includes back filling and proper ramming. Double Pole (a)11M Long STP. |
12 | Installation and Commissioning of 11/0.4 KV, 25 KVA T/F Mounted on Plinth/ Double Pole/Chair as per site requirement and providing & fixing of Lugs & copper L-piece (04 No.) of size 400x50x6mm and making of L.T.Connectionswith complete work in all respects. |
13 | Fixing and laying of ACSR Weasel conductor for Jumpering as per site requirement. |
14 | FIXING OF PIN INSULATOR WITH PIN AS PER SITE REQUIREMENT. |
15 | FIXING OF MS DROPPER, Top and T- CHANNEL AS PER SITE REQUIREMENT. |
16 | Preparation of 11 KV Power Cable ends: Making of 11 KV XLPE Heat shrinkable outdoor jointing kits suitable for 3x70sqmm XLPE Cable after duly plumbing and taping of cable, providing, fixing and crimping of proper size good quality lugs with complete connention in all respect. |
17 | FIXING of Substation Base Angle AS PER SITE REQUIREMENT. |
18 | Installation and Fixing of 11 KV Fuse Set: Assembling and installation of fuse set on the fuse set structure of the T/F. The work includes fabrication for proper fixing, if required. Complete work in all respect. |
19 | Providing and Driving of MSearth rod of size20x2500 mm in earth andjointing through G.I. wire of 6 SWG between support and earth electrode by providing proper size of bolts and nuts for pole earthing. Supply Erection, fixing, grouting of stay rod in cement, sand and brick ballastin ration 1:4:8 in Block 600*600*300 mm with binding & nuzzlingincluding providing & fixing of stay insulator complete in all respect with grouting. (All Work and Material in the scope of Contractor) |
20 | Fixing, tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing, including providing & fixing of Stay Insulators of 11KV and Stay Clamps. |
21 | Grouting of stay rods (20x1800)mm including all work of excavation, cement concrete in size (0.60x0.60x0.30)m in ratio 1:3:6 cement, sand, 20mm Stone grift) as per drg. Including back filling of soil and proper ramming etc. |
22 | Supply & Laying ofHDPE Pipe PE-80, PN-4, DN-140mm dia by HDD trenchless method for 11KV 3x70sq.mm XLPE Double Ckt. cable as per site requirement. (PVVNL GTP APPROVED HDPE PIPE SHALL BE SUPPLIED WITH INSPECTION.) |
23 | Drilling of dia 220 mm in two parallel bores for Double Curcuit by trenchless method by horizontal boring machine at a depth of 1.50 mtrs to 2.50 mtrs. (as requirement at site) below the ground level in hot mixed road with complete work in all respect as per RESPO. |
24 | Laying of 11KV Double Ckt. 3x70Sq.mm XLPE cable in HDPE Pipe. |
25 | Digging of pits of size 4 mtr x 4 mtr x 1.5 mtr for cable loop FOR making risers at double pole and re-filling of pits in proper manner with required material at kacha/pakka and hot mix road. (All Work and materialin the scope of contractor) |
26 | Laying of 11 KV 3X70 Sq.mm XLPE Cable in the air on cable Riser Double Pole, existing trench cable trench, nala x-ing & Providing 24 Mtr. GI Pipe 6" Inch Dia and making connection with 11KV over head line at both ends. |
27 | Providing and Fixing ofMS Holding Clamps as per site requirement. |
28 | Providing and Fixing ofMSNut, Bolt and Washers as per site requirement. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail