Grama Panchayat has published Tender For Supply Of Mgnregs Material Supply. Submission Date for this Tender is 15-02-2024. Construction Material Tenders in Palakkad Kerala. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | MGREGS Materials |
2 | Stone Aggregate(single size): 40 mm nominal size |
3 | Stone Aggregate(single size):20 mm nominal size |
4 | Stone Aggregate(single size): 10 mm nominal size |
5 | Stone Aggregate(single size): 06 mm nominal size |
6 | Portland Cement |
7 | Chromium plated Brass screws 30 mm |
8 | Chromium plated Brass screws 25 mm |
9 | Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm |
10 | Bright finished or black enameled mild steel screws 40 mm |
11 | Bright finished or black enameled mild steel screws 20 mm |
12 | Anodised Aluminium tower bolt (barrel type)300x10 mm |
13 | Anodised Aluminium handles 125 mm with plate 175 x 32 mm |
14 | Deharadun white lime |
15 | Black Japan |
16 | Synthetic enamel paint in black or chocolate shade |
17 | Plastic emulsion paint |
18 | Black colour dark shade pigment |
19 | Coarse sand (zone III) |
20 | Fine sand (zone IV) |
21 | Mild steel round bar 12 mm dia and below |
22 | Mild Steel round bar above 12 mm dia |
23 | Twisted steel/deformed bars |
24 | Structural steel such as tees, angles, channels and R.S. joists |
25 | Flats up to 10 mm in thickness |
26 | Mild steel sheets for tanks |
27 | Mild steel hooks |
28 | Iron pintels including weldded pin |
29 | Stone for masonry work |
30 | Second class kail wood in scantling |
31 | Second class kail wood in planks |
32 | Welding by electric plant |
33 | Mild steel sheets with bolts and nuts to rest on pintels |
34 | C.I. bracket for wash basin and sinks |
35 | Polyethylene water storage tank with cover and suitable locking arrangemnet |
36 | 15 mm C.P.brass tap |
37 | 100 mm S.C.I. trap with vent heel |
38 | Vitreous China flat back wash basin 630x450 mm |
39 | C.P. brass waste 32 mm |
40 | Vitreous China orrisa type w.c. pan size 580 mm |
41 | Float glass sheet of nominla thickness 5.5 mm (weight not less than 13.50 Kg/ sqm) |
42 | Mild steel tubes electric resistant or induction butt welded |
43 | Red oxide Zinc chromate primer |
44 | Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm |
45 | Precast chequered cement tiles 22 mm thick Dark shade using ordinary cement |
46 | wall form panel 1250x500 mm |
47 | Corner angle 45x45x5 mm 1.50 m long |
48 | 100 mm channel shoulder 2.5 m long |
49 | Double clip (bridge clip) |
50 | Single clip |
51 | M.S. Tube 40 mm dia |
52 | Wall form panel 1250x450xmm |
53 | Corner angle 45x45x5 mm 2.50 long |
54 | Column clamp 450x1070 mm |
55 | Prop 2 m (2-3.5m) |
56 | Adjustable span ESO+SI (2.35-3.40) |
57 | Adjustable telescopic prop 3 m (2.02-3.75m) |
58 | Beam clamp 300-380 mm (450-1070 mm) |
59 | Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessoriesand flush pipe) |
60 | Neoprene / EPDM rubber gasket |
61 | Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black |
62 | Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades and designs of White, Ivory, grey, Fume Red brown etc. |
63 | Powder coated M.S. butt hinges 100 mm X58 mm X 1.9 mm |
64 | Multi surface paint |
65 | Special primer (C.W) |
66 | Metal Primer (U.G.) |
67 | Vitrified floor tile 60x60 cm |
68 | 35 mm thick factory made solid panel PVC door shutter of single piece extruded profile non decorative finished (Matt finished) |
69 | Sundries |
70 | Solid blocks of size 30x20x20cm |
71 | Solid blocks of size 30x20x15cm |
72 | laterate stone of size 40x20x15cm |
73 | 200 mm Aluminium aldrop |
74 | Iron hooks & eyes 100 mm |
75 | PVC pipe 25 mm outer dia . 12 kgf/cm2 |
76 | PVC pipe 32mm outer dia. 10Kgf/cm2 |
77 | PVC pipe 75 mm outer dia 6kgf/cm2 |
78 | PVC pipe 150 mm outer dia 6kgf/cm2 |
79 | PVC vent cowl 75 mm dia |
80 | PVC Socket/coupling 75 mm dia |
81 | PVC door Elbow 110 mm dia |
82 | PVC bend 110 mm dia |
83 | PVC Tee 110x110x110mm dia |
84 | PVC Socket/coupling 110 mm dia |
85 | PVC Reducer 110x75 mm dia |
86 | Quarry Waste |
87 | Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper |
88 | Vibrator (Needle type 40 mm) |
89 | Galvanised steel J or L hooks 8 mm dia |
90 | G.I. pipes 40 mm dia |
91 | G.I pipes 50 mm dia |
92 | Galvanised wire mesh of average width of aperture 1.4 and nominal dia. of wire 0.63 mm |
93 | Binding wire |
94 | Wire nails |
95 | Polyurethene bags |
96 | Green Net 75% shade |
97 | GI Chicken mesh ( 24 guage 12.5x12.5mm) |
98 | Mild steel tubes hot finished welded type |
99 | GI trafford profile sheet 0.35mm thick |
100 | PVC Elbow 75mm dia |
101 | PVC Bend 75mm dia |
102 | PVC pipe 63 mm outer dia 6kgf/cm2 |
103 | PVC Bend 63mm dia |
104 | PVC Elbow 63mm dia |
105 | SOLID BLOCK 40x20x20 |
106 | Interlocking CC paver block 60mm thick M30 |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail