Military Engineer Services-MES has published Tender For Additional/Alternator Improvement To Certain Smqs At Af Stn Adampur ( Phase-I ). Submission Date for this Tender is 18-03-2024. Civil Work Tenders in adampur Punjab. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 11-Mar-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 18-03-2024 |
| Sl. No. | Item Description |
| 1 | B/R PORTION |
| 2 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc completed all as specified. |
| 3 | M & L for rendering 15 mm thick on fair faces of brick wall with mixing WPC @ 3% by wt of cement finished fair & even in CM 1:4 upto three storey complete all as specified and directed. |
| 4 | M & L for rendering 15 mm thick on faces of brick work or concrete surface finished even & smooth in CM 1:6 complete all as specified and directed. |
| 5 | M & L for rendering 10 mm thick onbrick or concrete surface of ceiling finishedeven & smooth in CM 1:3 complete all as specified and directed. |
| 6 | M&L for 15 mm thickrenderingin1:4 CM with using 3% WPC as in sunken portion complete all as directed. Note :- WPC shall be measured and paid separately under respective item. |
| 7 | M&L for applying two coats oftwo component elastomeric acrylic polymer modified cementitious waterproofing coating, Smartcare Ultra block 2K or equivalent, having 215% elongation as per ASTMD-2370, resisting 5 bars hyrostatic pressure as per DIN 1048, crack briding upto 3.50 mm as per EN 1062-7 and sprinkling dry fine sand over wet second coating complete, as per maunfactures specifications. NOTE: - Unless otherwise recommended by manufacturer, the mixing ratio of the components shall be 6 parts of powder and 4 partsliquid without any water addition in the mixing, etc. |
| 8 | M&L cement concrete (1:2:4) type B-0 (using 12.5mm graded aggregate) as in sunken portion or similar items as in filling complete all as specified anddirected. |
| 9 | M & L for Broken brick or boulders aggregate not exc 50 mm deposited spread and levelled in layers not exc 15 cm thick watered and rammed to a true surface in sunken portion, etc complete all as specified and directed. |
| 10 | Cutting chases pinning in making good to facing where required and pointing in cement mortar (1:3) for concealed water tubing in brick walls cutting n.exc 10 cm girth. complete all as specified and directed. |
| 11 | Taking down 15 mm dia GI steel tubing and connection, including cleaning for refixing or removal, completed all as specified and directed. |
| 12 | Taking down 20 mm dia GI steel tubing and connection, including cleaning for refixing or removal, completed all as specified and directed. |
| 13 | S & F GI tubes medium grade with all fitting and fixed complete to walls, ceilings or laid infloors 15mm bore complete all as specified and directed. |
| 14 | Refixing old GI tubing and connections, 20 mm dia,in old or new position. (Walls, ceiling, floors, etc.) completed all as specified and directed. |
| 15 | S & F tubes 20 mm bore dia, medium grade, galvanised, with allfitting and fixed complete to walls and ceilings or laid in floos,complete all as specified and directed. |
| 16 | Dismantling floor, hearth or wall tiling or 10mm to 7mm stone chips or terrazzo on walls including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, etc completed all as specified. |
| 17 | M & L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust and brushing neat cement slurry with 3.0 kg of cement per sq. metre, etc completed all as specified. |
| 18 | Demolition of cement concrete (unreinforced)of any description and in any position not otherwise specifically provided all as specified. |
| 19 | M & L for 25mm thick PCC 1:2:4 type BO (using 12.5mm graded stone aggregate) as in under layer / sub floor complete all as specified and directed. |
| 20 | M&L Coloured Glazed ceramic tiles in vertical surfaces by providing tiles of size 450X300x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to matchincluding Rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces as backing coat. |
| 21 | M&L Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick Screed bed or bedding layer of mortarfor laying floor finishes in CM 1:4 |
| 22 | M&L Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick Screed bed or bedding layer of mortarfor laying floor finishes in CM 1:4 |
| 23 | M & L for ColouredGlazed ceramic tiles in vertical surface of size matching withItem No 1.21 above , such as skirting , dados and riser to steps etc set and jointed in neat cement slurry and pointed in white or colour cement to match over and including backing coat of 10 mm thick in cement mortar 1:4. |
| 24 | M& for machine cut Kota stone slab flooring 18-22mm thick of size 550mm x 550mm in staircase landing and in stair case steps in single piece (of length not more than 1200mm for steps only) over and including 20mm thick screed base in cement mortar (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing, cutting and polishing completeall as specified. |
| 25 | M &L for machine cut Kota stone slab 18-22mm thick on vertical surfaces as in staircase riser skirting/ dado etc in single piece (of length not more than 1200mm)over and including 15 mm thick rendering in cement mortar (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified |
| 26 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.50 Sqm eachand removing to or from store complete all as specified and as directed by the Engineer-in-Charge |
| 27 | Taking down, Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each but with shutters (without taking off shutters from the frame)including ,etc and removing to or from store complete all as spd and directed. |
| 28 | Taking down shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm each and removing from site all as specified. |
| 29 | Taking down, easing, adjusting of old wooden shutters of any description exc. 1 Sq,m and not exc. 2 Sq.m each and refixing in same opening after tiling work complete all asdirected by EIC. |
| 30 | M & L Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) as in window frame / door frame with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS 733 and IS : 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P brass/ stainless steel screws including powder coated tower bolt, handle and stay of standard size whereever required complete all as specified and as directed by Engineer-in-charge. |
| 31 | M&L Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall not be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS : 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc.Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P brass/ stainless steel screws including powder coated tower bolt, handle and stay of standard size complete all as specified and as directed by Engineer-in-charge. |
| 32 | S& F Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;frames; ladders; framed balusters; walk ways; railings; cooler frame ;rungsframework of water tanks and similar work using any type of section con- forming to Fe.290.Gde-E-165,etc complete all as spd and directed. |
| 33 | S & F for Aluminium alloy wire cloth,0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples, etc complete all as spd and directed. |
| 34 | Supplied only for 4 mm thick,Sheet glass, ordinary quality, in squares n exc 0.5 sq. m each pane,etc completed all as specified. |
| 35 | Supplied only for 4 mm thick,Figured glass, pin head type in squares n exc 0.5 sq.m each pane,etc completed all as specified. |
| 36 | S & F for Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life),etc complete all as spd and directed. |
| 37 | S & F for Factory made soild PVC profiled panel door shutter 28mm thick with integral skin as frame & 3mm thick high pressure compact laminate on both side of approved colour as infill,with "C type Gl or 40 x 20 x19 of MS pipe as stiffner & supplying & fixing in frame at site as per specifications & drawing.,etc complete all as spd and directed. |
| 38 | S & F Pressed steel frames made out mild steel sheet 1.25 mm thick, with size of frame 165 mm x 60 mmfor doors with one or more rebates including necessary fixing lugs, 100mm long medium weight hinges, lock strike plates etccomplete all as specified and as directed. |
| 39 | S&F pressed steel frames made out mild steel sheet 1.25 mm thick, with size of frame 105 mm x 60 mmfor doors with one or more rebates including necessary fixing lugs, 100mm long medium weight hinges, lock strike plates etccomplete all as specified and as directed . |
| 40 | M & L for providing PCC 1:3 :6 type C-0 using 12.5 mm graded crush stone aggregate for filling back of chowkhats complete all as specified and as directed . |
| 41 | S & F for flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, thickness 35 mm , complete all as spd and directed. |
| 42 | S & F for flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, thickness 25 mm , complete all as spd and directed. |
| 43 | S & F 35 mm,2nd class hard wood factory made, Glazed and skeleton shutters, open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a);,etc complete all as spd and directed. |
| 44 | M & L for 18/19 mm thick, Block boards, grade 1 quality, exterior grade, decorative type with decorative face veneer on one facee, fixed with screws to frame-work as in cupboard,kitchen cabinet and partition , shelf to be fixed with L type steel clips on three sides etc completed all as specified and directed by engineer in charge. |
| 45 | M & L for 18 mm thick, No of ply as per manufactures,plywood, grade BWP, type BB fixed with screws to timber frame work, etc completed all as specified. |
| 46 | M & L for 12 mm thick, No of ply 7,plywood, grade BWP, type BB fixed with screws to timber frame work, etc completed all as specified. |
| 47 | M & L for 0.9 mm thick, Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer"s instructions, etc completed all as specified. |
| 48 | S & F for Hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws,Size of hasp and staple 100 mm long etc complete all as spd and directed. |
| 49 | S & F for Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21, size of hinges in 100 mm, etc complete all as spd and directed. |
| 50 | S & F for 30mm wide continuous (piano) hinges mild steel , bright finish or electrogalvanised , etc complete all as spd and directed. |
| 51 | S & F 150 mm long aluminium anodized barrel tower boltsof extruded section complete all as specified and directed by Engineer-In-Charge. |
| 52 | S & F 200 mm long aluminium anodized barrel tower boltsof extruded section complete all as specified and directed by Engineer-In-Charge. |
| 53 | S & F 125 mm size, aluminium anodized handles, cast type complete all as specified and directed by Engineer-In-Charge. |
| 54 | S & F for 300 mm long , Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, etc complete all as spd and directed. |
| 55 | S & F 150 mm long mild steel ordinary rat tail rod pattern door spring including roller and roller plate complete all as specified and directed by engineer- in-charge. |
| 56 | S & F floor door stopper of aluminium alloy body double leg 75-80 mm long with rubber stopper at bottom. |
| 57 | S & F for Ball catches/catcher as per manufacturer with 8mm dia steel ball, and brass body and striking plate including letting in and fixed,etc complete all as spd and directed. |
| 58 | Dismantling Brick tiles or terracing tiles, single layer on roofs, etc complete all as spd and directed. |
| 59 | Demolition of mud puska in roof any thickness incl plastering & leeping removed complete all as specified and directed. |
| 60 | Cutting grooves in brick wall 75 mmwide and 65 mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified. |
| 61 | M&L for cement concrete 1:2:4 type B0 (12.5 mm graded aggregate)aspadding in roof including necessary formwork as specified. |
| 62 | M&L cement 1:2:4, type B0, using 12.5 mm aggregate providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges etc complete all as spd and directed. |
| 63 | M&L for 10mm thick rendering in cement mortar 1:4 on concrete surfaces(when concrete is green) and rendering is to be even and fairwith water proofing compound as permanufacturers instructions complete all as specified and directed. Note :- WPC shall be measured and paid separately under respective item. |
| 64 | Supply only integral water proofing compound . |
| 65 | Preparation of newly plastered/RCC surfaces, making the surface completely dry and applying a coat ofbitumen primer, having density in range of 0.87 to 0.89 kg/litre at 25 degree centigrade and viscosity of 70 to 160 CPS, manufactured by same manufacturer @ 0.4 ltr/sqm shall be applied and after drying of primer for 24 hours apply APP prefabricated five layered black finish water proofing membrane comprising of centre core of 50 to 60 GSM (glass fibre matt / 170 gm non-woven polyster matt sandwiched on both sides by APP polymer modified bitumen which is protected on both sides by 20 micron thermo fusible polyesthylene sheet laidwithtorching application to the surface complete and sealing the side as well as end laps with torch(Overlaps should not be less than 10cm in longitudnal direction and 15cm in traverse direction and shall be bonded with bitumen primer and levelled by heating the overlaps with brutane torch.) |
| 66 | Supply and fixing heat resistant terrace tiles (300mm x 300mm x 20mm) with SRI (solar refractive index)> 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 and , including rubbing and polishing of the surface upto 3 cuts complete , including providing skirting upto 150 mm height along the parapet walls in the same manner. |
| 67 | Demolition of reinforced cement concrete as in chimney, Roofs, floors (other than ground floors), beams staircases, landing, chajjas, and similar suspended work complete. |
| 68 | M&L for RCC 1:2:4 type B1 (Using 20 mm graded stone aggregate)Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and shown on drgs. |
| 69 | Formwork to ,rough finished surfaces of flat concrete,soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping),etc complete all as spd and directed. |
| 70 | S & F Mild steel TMT bars 8mm dia and over, cut to length, bent to shape reqd, incl cranking, bending spirally for hooping for columns, hooling ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 71 | M & L Granite 16-18 mm (of any type) work (table rubbed and polished)thickin steps, jambs, pillars, window-cills, cooking platforms slab and in front facia and like in cement mortar (1:4) including 15 mm thick screed bed in CM (1:4) for laying of granite slab & pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, etc complete all spd and directed. |
| 72 | M & L for Rounding to edges of stone slabs one edge, such as in steps,cooking platform, and other similar situations etc completed all as specified. |
| 73 | S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe etc. complete including making good to floor,complete all as specified and directed. |
| 74 | S&F in repairs PVC flushing cistern 10 ltr capacity valve less syphonic action type low level with and incl ball valve float & handle, flush pipe, waste pipe & brackets complete set complete all as specified and directed. |
| 75 | S&F in repair Vitreous China wash basin, white, flat back, size 550x400 mm with waste , chain and plug andporcelainstopper andincluding brackets etc complete all as specified. |
| 76 | S&F in repair Stainless steel sink with drainage board made out of 1.00mm thick sheet for kitchen or laboratory with plug , waste pipe ,washers including cantilever cast iron brackets, connecting union etc overall size 940mm x 460mm x 203mmwith bowl size 405mm x 354mm x 203mmcomplete all as specified |
| 77 | S & F in repair 600 mmx 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC buildg board or commercial plywood and fixed to wooden plugs with CPbrass screws and cup washers complete all as specified and directed. |
| 78 | S&F in repairs concealed stop cock type Chromium Plated with long shank cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends of size 15mm bore. complete all as specified and directed. |
| 79 | S&F in repairsstop cock/angle cock fancy type Chromium Platedwith long shank cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends of size 15mm bore. complete all as specified and directed. |
| 80 | S&F in repairs bib tap, cast copper alloy with capstan head, Chromium Plated fancy type with long body shank, screwed down with high pressure screwed for iron pipe & fixed 15mm bore, complete all as specified and directed. |
| 81 | S&F in repair Pillar tapscast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot" or `Cold" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified. |
| 82 | S&F in repair Shelf of PTMT fixed with and including chromium plated brass screws and wooden/ plastic cleates. |
| 83 | S&F in repair brass chromium plated shower roses with swivel joints, 125 mm sizewith Chromium Plated long shank arm including fixing to steel pipe or union, complete all as specified and as directed. |
| 84 | S&F in repair PVC connections 15mm size with PTMT nuts of length 450 mm, complete all as specified and as directed. |
| 85 | S & F in repair Brass chromium plated, tubular towel rails 20 mm dia, D- type, 60 cm long between flanges, completed all as specified and directed. |
| 86 | S&F in repair steel plate rack made of stainless steel 0.61 mm thick with over all size 600mmX750mm complete all as specified and directed by Engineer-in-charge. |
| 87 | S&F in repair mild steel powder coated conduit 22-25 mm bore, cut to size and erected in position including provisonbrackets &decorative type finial (Two nos for each opening) complete all as specified and directed. |
| 88 | S&F in repair Soap dish, vitreous China white, approximate size 160x 160x90mm. |
| 89 | S&F in repair grating doom100mm dia size with PTMT complete all as specified and directed. |
| 90 | Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc complete all as directed by EIC. |
| 91 | M&L for brick work with sub class ‘B’ (or compressive strength 75kg/cm cm) bricks old size straight or curvedon plan exc 6m mean radius builtin cement mortar 1:6 |
| 92 | Ditto as per above item but except bricks |
| 93 | Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level), cementconcrete ( un reinforced), etc complete all as spd and directed. |
| 94 | M&L 75 mm thick, cement concrete type C-1, 1:3:6 using 20 mm graded stone aggregate, finished even & smooth without using extra cement, as in plinth protection and making 6 mm wide joints in every 2.5 m interval and in every corner and with junction with wall and plinth and joints shall be sealed with joint sealing comound grade "A" complete all as specified. |
| 95 | M & Lpreparation of newly plastered surfaces of ceilingand applying three coats of white wash on ceiling, complete all as specified and directed. |
| 96 | M&L for one coat of white wash on old ceiling surfaces, including preparation of surfaces, complete all as specified. |
| 97 | M&L for two coat of white wash on old wall surfaces, including preparation of surfaces, complete all as specified. |
| 98 | Prepration of newly plastered wall surfaces of any description complete all as specified and applyingTwo coats of oil bound distemperover and including a coat of alkali resistant primer complete |
| 99 | Complete removal of existing treatment of any description, including prepration of wall surfaces prefectly smooth of any description complete all as specified and applyingTwo coats of oil bound distemperover and including a coat of alkali resistant primer. |
| 100 | Prepration of newly plastered wall surfaces of any description complete all as specified and M& L for applyingTwo or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/ltr and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted ) with silicon additives @ 1.43 ltr/10 sqmover and including priming coat of exterior primer applied @ 0.90 ltr/10 sqm over new surface. |
| 101 | Complete removal of existing treatment of any description, including prepration of wall surfaces of any description complete all as specified and M& L for applyingTwo or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/ltr and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted ) with silicon additives @ 1.43 ltr/10 sqmover and including priming coat of exterior primer applied @ 0.90 ltr/10 sqm over new surface. |
| 102 | M&L Preparation of new steel surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamelled paint over one coat of red oxide primer. |
| 103 | M&L for applying one coat (finishing coat) of synthetic enamel paint including peparation of old painted steel & iron surfaces of any description not other wise described over 10cm width or girth, complete all as specified. |
| 104 | M&L for preparation of new wooden surface and applying two coats of synthetic enamel paint over a coat ofpink primer complete all as specified and directed . |
| 105 | M&L for applying one coat (finishing coat) of synthetic enamel paint, including preparation of old painted wood and wood basedsurfaces of any description not other wise described over 10cm width or girth and complete all as specified. |
| 106 | M&L for applying two coats of synthetic enamel paint, including preparation of old painted wood and wood basedsurfaces of any description not other wise described over 10cm width or girth and complete all as specified. |
| 107 | Writing letters or figures by specialist / professional painter (Block, Roman, Italic or indian) with thick black synthetic enamel paint not exc. 10cm heighton white basecomplete all as specified. |
| 108 | Uprootingtree/plants upto 30 cm girth from wall or any part of building upto triple storey buildings completly to the entire satisfaction of Engineer-in-Charge, making good the disturbed portion and filling holes in cement mortar (1:3) or PCC (1:2:4) type B-1 using 20mm graded stoneaggregate to match with existing surfaces and removal of rubbish outside MOD land complete all. |
| 109 | Dismantling water tanks P.V.C. or R.C.C. capacity exc 250 ltr & n exc 500 ltr and removing to store,etc completed all as spd and directed. |
| 110 | S&F 500 ltrsrotational moulded polyethylene water storage tanks (cylindrical verical with closed top) hoisted and fixed in positioncomplete all as specifed and directed. |
| 111 | S & F for Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed,Bore dia of pipe in 20 mm, etc complete all as specifed and directed. |
| 112 | S & F in repair for Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed,Bore dia of pipe in 20 mm, etc complete all as specifed and directed. |
| 113 | S & F in repair for PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls including holder bats, bore of pipe in 150 mm, etc complete all as specifed and directed. |
| 114 | S & F in repair for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors , bore of pipe in 75 mm including holder bats , etc complete all as specifed and directed. |
| 115 | S & F in repair for PVC (SWR) bends/shoe any radius, bore of pipe in 150 mm, etc complete all as specifed and as directed. |
| 116 | S & F in repair for PVC (SWR) bends any radius, bore of pipe in 75 mm, etc complete all as specifed and as directed. |
| 117 | S & F in repair for PVC (SWR) junction , single (single T) equal or unequal, bore of pipe in 75 mm, etc complete all as specifed and directed. |
| 118 | M & L for bore of tube in 40 mm, Tubes, "medium grade", galvanised, with all fitting; laid in trenches, in short length as in spout pipe etc complete all as spd and as directed. |
| 119 | S&F100mm bore dia cast iron spun type soil waste and vent pipe i any length with or without ears with cement joints fixed to wall including holder bats / clamp. |
| 120 | S&F75mm bore dia cast iron spun type soil waste and vent pipe i any length with or without ears with cement joints fixed to wall including holder bats. |
| 121 | S&F50mm bore dia sand cast pipes soil waste and vent pipe in any length with or without ears with cement joints fixed to wallcomplete all as specified including holder bats / clamps.. |
| 122 | S & FTraps ‘P’ or ‘S’, cast iron spun for bore of pipe in 100 mm , etc complete all as specifed and directed. |
| 123 | S&F100mm bore dia cast iron spun type soil waste and vent pipe i any length with or without ears with cement joints, laid in trenches or in floors in short pices complete all as specified and directed. |
| 124 | S&F75mm bore dia cast iron spun type soil waste and vent pipe i any length with or without ears with cement joints, laid in trenches or in floors in short pices complete all as specified and directed. |
| 125 | Dismantling of cast iron or reinforced concrete drain pipes including fittings, jointed in cement mortar and taking out of trenches or walls, if required, Internal dia of pipe in 50 mm, etc complete all as spd and directed. |
| 126 | Dismantling of cast iron or reinforced concrete drain pipes including fittings, jointed in cement mortar and taking out of trenches or walls, if required, Internal dia of pipe in 75 mm, etc complete all as spd and directed. |
| 127 | Dismantling of cast iron or reinforced concrete drain pipes including fittings, jointed in cement mortar and taking out of trenches, if required, Internal dia of pipe in 100 mm, etc complete all as spd and directed. |
| 128 | S & F in100mm bore centrifugally cast iron Bends (any radius), diminishing pieces or tapers (larger bore measured)with oval access door etc complete all as specifed and directed. |
| 129 | S & F75mm bore centrifugally cast iron Bends (any radius), diminishing pieces or tapers (larger bore measured)with oval access door etc complete all as specifed and directed. |
| 130 | S & F100mm bore centrifugally cast iron Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches or "T" piece with oval access doors etc complete all as specifed and directed. |
| 131 | S & F 75mm bore centrifugally cast iron Branch pieces, Double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches or "T" piece with oval access doors etc complete all as specifed and directed. |
| 132 | S & F75mm bore dia centrifugally cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4 ) |
| 133 | S & F for Cast iron cowls, bore of pipe in 75 mm, etc complete all as specifed and directed. |
| 134 | S & F100mm bore centrifugally cast ironBends (any radius), diminishing pieces or tapers (larger bore measured) etc complete all as specifed and directed. |
| 135 | Cutting holes in Depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall, exc half brick but n exc one brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required,complete all as spd and directed. |
| 136 | ROAD / PATH / CULVERT |
| 137 | Surface dressing n exc 15 cm deep Soft/loose soil.,etc complete all as specified. |
| 138 | Removing excavated material n.exc 50m and depositing where didrected at a lavel n.exc 1.5m above the starting point in hard dense soil complete all as spd and directed. |
| 139 | M&L 100 mm thick PCC 1:3:6 type C2 (using 40mm graded agg) as in foundation filling and mass concrete etc complete all as spd and directed. |
| 140 | M&L PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in coping including formed work complete all as specifed and directed. |
| 141 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. |
| 142 | Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level), cementconcrete ( un reinforced), etc complete. |
| 143 | E/M PORTION |
| 144 | Taking down copper/aluminium point wiring for (light, fan , socket or power) complete including unserviceable fittings such as switches, ceiling rose, holders, sockets etc. and making good the distrubed surfaces on wall/floor etc complete all as specified and dirceted. |
| 145 | M&L for pointing wiring with 1.5 sqmm (nominal area) PVC insulated FRLSH, unsheathed, multistrand, 1100 volts grade copper conductor cable single core. drawn through in and including non metalic PVC concealed conduit not less than 20mm dia medium grade and its accessories including one run of 1.5 sqmm PVC insulated copper conductor cable green in colour for continuous earthing includingterminal box made out of MS sheet not less than 1.6mm thick, flush to wall with 3mm thick laminated hylam sheet top cover suitable for moduler switch / sockets all as specified for one light/fan/bell point controlled by one switch. Note :- Cost of cutting chasing of wall / floor for concealed conduit shall be deemed included in unit rate. |
| 146 | All as per item No 3.02 here in before but for one light/fan/bell point controlled by two switch. |
| 147 | All as per item No 3.02 here in before but for one 3 pin 5 amps socket point on independent board. |
| 148 | All as per item No 3.02 here in before but for one 3 pin 5 amps socket point on same board. |
| 149 | M&L for pointing wiring with 2.5 sqmm (nominal area) PVC insulated , unsheathed, multistrand, 1100 volts grade copper conductor cable single core FRLS drawn through withand including non metalic PVC concealed conduit not less than 20mm dia medium grade and its accessories including one run of2.5 sqmm PVC insulated copper conductor cable green in colour for continuous earthing including terminal box made out of MS sheet not less than 1.6mm thick, finished to wall with 3mm thick laminated hylem sheet top cover suitable for moduler switch / sockets complete all as specified. Note :- (i) Cost of cutting chasing of wall / floor for concealed conduit shall be deemed included in unit rate. |
| 150 | S& F Switch piano flush button single pole one way, 5 Amp complete all as specified. |
| 151 | S& F moduler switch piano flush button single pole two way, 5 Amp complete all as specified. |
| 152 | S&Fmoduler socket outlet multipurpose5 pin, 5 Amp, flush type, complete all as specified. |
| 153 | S& Fmoduler switch piano flush button single pole one way, 15 Amp complete all as specified. |
| 154 | S&F moduler socket outlet multipurpose6 pin, 15 Amp, flush type, complete all as specified. |
| 155 | S&F moduler ceiling rose, surface bakelite, 65 x 50mm, three terminals complete, all as specified. |
| 156 | S & F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings |
| 157 | S&F Stepped type electronic fan regulator flush type on the existing phenolic laminated sheet as required. |
| 158 | S&F Buzzer, Ding Dong AC. 230 volts, single pole complete all as specified and directed. |
| 159 | S&F Bell push, flush type, 5 amp complete all as specified and directed. |
| 160 | Supply and fixing LED lights fitting 1x 20W, 220V AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 161 | Supply and fixing LED lights fitting 1x 10W, 220V AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 162 | S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. |
| 163 | Disconnecting, taking up the existingelectric geyser and refixing the same in other/same location complete including fixing material etc all as specified and directed. |
| 164 | S&F exhaust fan made of sturdy Engineering plastic complete with louvers, shutter voltage 230V, 50 Hz, 1200 RPM, copper winding of sweep 300 mm complete with, bolt, nuts and washers, and provisioning of flexible copper cord three core PVC insulated & overall sheathed of size 0.50 sqmm from ceiling rose to exhaust fan complete all as specified and as directed. |
| 165 | S&F submain wiring with 6 sqmm (nominal area) PVC insulated FRLSH, unsheathed, multistrand, 1100 volts grade copper conductor cable single core. drawn through in and including non metalic PVC concealed conduit of size as per Para-19.125 of SSR Pt -I2009 medium grade and its accessories including one run of 6 sqmm PVC insulated copper conductorto wall with 3mm thick . Note:- (i) surface conduit shall be laid in celing portion only. (ii) Two run of 6 sqmm plus one run of 6 sqmm alongwith concealed conduit pipe shall be measured as one unit. (iii) Cost of cutting chasing of wall / floor for concealed conduit shall be deemed included in unit rate |
| 166 | S&F Sheet metal enclosureDB SPN, 8 way with 200 Amp rated bus bar, 240 V, double door . for fixing MCB’s, isolators etc., having IP-43 protection,flush mounting, complete all as specified |
| 167 | S&F MCB, SPN6 to 32 Amps rating 240V, 10 kA "C" curve complete all as specified and as directed. |
| 168 | S&F MCBSP 6-32 Amps with over loadprotection and rupturing capacity 10 kA, "C" curvecomplete all as specified and as directed.. |
| 169 | M & L earthing complete with galvanized steel earth plate electrode 600cm x 600cm x 6mm thick buried dircetly in ground (Earth pit not less than 2.25 m below normal ground level) with top edge of the palte not less than 1.5m below ground level connected to galvanized iron or steel pipe 40mm medium garde all as shown in electrical plate No.3 of SSR Part-I specification - 2009, connecting to earthing test point (earth test point to be provided at 5 mtr distance from earth pit) and testing on completion including necessary excavation and earth work by using galvanised earth lead wire 4.0mm dia as earthing lead. The rate alos include charcol dustans salt in alternator layers 20mm dia medium GI watering pipe, funnel , wire mesh, concrete 1:3:6 type C-1 for pit and RCC pit cover PCC pit shall be provided 50 cm away from earth pit and not on the earth pit itself. The extra cost of the watering pipe, bends, elbows shall be included in the unit rate. Note: RCC pit cover shall be precast of RCC 1:2:4 type B-1 80mm thcik reinforced with XPM weighing not less than 4 kg/Sq,m all as specified and directed. |
| 170 | Note :-Schedule of credit Rs 618209.00 will be deducted from total quoted amount while calculating contract sum. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
