Construction Of Smashanbhumi Shed Compound Wall And Allied Works At Lanja Nagarpanchayat
Tender Value
Ref. Documents
Estimated cost
Bid Submission
16 Feb 2024
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
lanja → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Smashanbhumi Shed Compound Wall And Allied Works At Lanja Nagarpanchayat
BOQ
| Sl. No. | Item Description |
| 1 | Item No:-1- Labour charges for removing grass,thorney shrubs, Jungli shrub,Kubabul and alike grass along road side making the ground clean by showel and phavaras etc. complete. |
| 2 | Item No.2:-Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means |
| 3 | Item No.3 :- Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth /murum, ramming, watering including shoring and strutting etc. complete (lift upto 1.5m) By Mechanical Means |
| 4 | Item No.4:- Providing soling using 80mm size trap metal in layres of 15 cm each including filling voids with sand, ramming, watering etc. complete. |
| 5 | Item No.5:- Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand. |
| 6 | Item No.6:- Providing and laying in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excludingeinforcement and structural steel) etc.complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 7 | Item No:-7- Providing and laying Casting situ /Ready Mix cement concrete M- 20 of trap /granite /quartzite /gneiss metal for R.C.C.columns as per detailed designs and drawings or as directed includingsteel centering, formwork, cover blocks,laying /pumping ,compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc.complete,(Excluding reinforcement and structural steel).with fully automatic microprocess or based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 8 | Item No.8 :-- Providing and laying Casting situ /Ready Mix cement concrete M- 20 of trap /granite /quartzite /gneiss metal for R.C.C.beams and lintels |
| 9 | Item No.9 - Providing and laying in situ cement concrete M -30 with tremix treatment for 200 mm thickness forConcrete Road is including laying plastic sheet for 125 micron thickness with groove cutting of 4 mm wide and 20m deep with necessary refilling with bitumen ( excluding reinforcement) with Natural sand etc. complete |
| 10 | Item No.10 :-Providing and fixing in position HCRM / CRS (Corrosion Resistant Steel) bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 11 | Item No.11 :- Providing Laterite stone masonary in cement mortar 1:6 in Foundation and plinth incl.striking joint on the unexposed faces and watering comlpete.( Laterite stone six sides cut and thk.of mortar joints shall be 12mm maxim.) |
| 12 | Item No.12:-Providing laterite stone masonry in cement mortar 1:6 in superstructure including racking out joints where plastering is to be done watering and scaffolding complete. (Laterite stone six sides cut and thickness of mortar joints shall be 12mm max.) |
| 13 | Item No.13:- Providing and laying Cast in situ/Ready Mix cement concrete M-15 of trap/granite / quartzite /gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formworkcompacting, roughening them if special finish is to be provided,finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) |
| 14 | Item No.14:-Providing internal cement plaster 20mm thick in two coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete. |
| 15 | Item No.15:-Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. |
| 16 | Item No.16:-Providing vee pointing with cement mortar 1:3 for stone / Brick masonry including scaffolding and curing etc. complete |
| 17 | Item No.17- Providing and layingAntiSkid CeramicTiles Of approved quality of company Kajaria / Nitco/ Asian orEquivalentmake having size300 mm to300 mm and conforming to IS 15,622-2,006 ( Group B II i) for antiskid flooring in required positionlaid on ded.of 1:4CM incl. neat cement float,joints, curing and cleaning etc.complete. |
| 18 | Item No.18:-Providing and laying ceramic tiles of having size 30 cm. x 30 cm. andconfirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. |
| 19 | Item No.19 :- Providing and fixing heavy duty interlocking concrete Rubber mould glossy paving blocks of 80mm thickness of having a strength of 400 Kilogram/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30mm thick including skirting joint sand cleaning etc.complete. (using 100% crushed sand) |
| 20 | Item No.20:-Providing and laying machine cut machine Polished Kota stone flooring 25mm to 30mm thick and required width in plain/ diamond pattern on bed of 1:6 C. M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaningetc. complete.Sr.no.33.06 |
| 21 | Item No.21:-Providing and fixing mild steel grill gate with angle iron frame 65mm x 65mm x 10mm with iron bars at 150mm C/C and diagonal flats as per the detailed drawing including hinges,pivot block locking arrangement, welding riveting and oil painting of three coats of approved shade Weight of gate 35 Kilogram/Smt. |
| 22 | Item No.22 :- Providing structural steel work in trusses,other similar trussed purlins and members with all bracing ,gusset plates etc.as per detailed designs and drawings or as directed including cutting, fabricating ,hoisting, erecting fixing in position, Making riveted /bolted/ welded connection and one coat of anti corrosive paint and over it 2coats of oil painting approved quality and shade etc. complete |
| 23 | Item.No.23 :- Providing and fixing colour coated Zincalume (R) AZ150 (min 150 gms / sq.mt .total on each side ) profiled sheets for roofing.The feed material is manufactured out of nominal 0.45mm Base Metal Thickness (BMT) (0.5mmTCT),Hi-strength steel with min.550 MPa yield strength,metallic hot dip coated with Aluminium-Zincalloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND (R) steel quality super durable polyester paint coat (with inorganic pigment) .The paint shall have a total coating thickness of nominal 35um,comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface.Profile sheet shall have nom.950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center-to-center.The end rib shall be designed for anti-capillary groove. and return leg.The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min.fastened with min.25 um Zinc-Tinalloy coated,Hexhead,self-drilling screw etc.complete. (weight of profile 4.52 kg/sqm ) |
| 24 | Item No.24:- Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters |
| 25 | Item No.25:-Providing and fixing on walls/ ceiling/ floor Following Dai. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete.a) 15 mm |
| 26 | b) 20 mm |
| 27 | c) 25 mm |
| 28 | c) 40 mm |
| 29 | Item No.26 :- Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete. |
| 30 | Item No.27 - Providing,transporting andFixingRCC Sit-Out with all fittings, fixtures etc complete. As directed by Engineer in Charge |
| 31 | Item No.28 - Providing,transporting andFixing cast iron Shav-Dahini of size 750 mm x 2100 mm with all necessary fixtures and fittings etc complete. As directed by Engineer in Charge |
| 32 | Item No.29 :-- Providing and applying two coats Apex Ultima Puranature Anti-Pollution Or equivalent approved brand,paint should decomposes organic substances and inorganic gases ( NOx,VOC’s, CO, SOx,formal dehydes,etc.) in presence of natural or artificial light.It contains Graphene and nano particles of titaniumoxide.and Absorbs CO2 (4.8Kilogram/15l) . plaster crack should be filled by Acrylic base Crack seal / Textured Crack filler,Paint has to applied on one coa tof Apex Ultima Puranature Anti-Pollution Primer or Equivalent. Warranty Should be given by the Manufaturer The work should be done by the Manufacturer Recommended applicator and he should be able to furnish stage wise on site technical reports from the concerned company technologist. |
| 33 | Item No.30 :-Providing and applying plastic emulsion paint of approved quality,colour and shade to old surface in three coats including scaffolding,preparing the surface.(excludingprimer coat )etc.complete. |
| 34 | Item No.31 :- Providing and applying two coats of flat oil paint of approved colour and shade to internal/external plastered surfaces including scaffolding if necessary,cleaning and preparing the surface (excluding primer coat) etc. complete. |
| 35 | Item No.32 :-Providing and erecting Y type barbed wire fencing with seven rows of wire with 2.45 mm dia G.I. pipe ( Rezan/ concentiDeleted ire 0.75 mm dia ) with hot dip and G.I. coated hooks as per drawingsupportedonM.S.angle50x50x6mmat2.5mtr.c/cincludingfixingand fastening with wire, painting M.S. angles with one coat of red lead primer and two coat of oil paint etc. complete. |
| 36 | Item No.33:-Providing and fixing board displaying information, such as \"Name of work, Tender cost, Name of Contractor, Work completion and liability period etc\", having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge |
| 37 | testing |
| 38 | royalty charges |
| 39 | gst |
| 40 | insurance |
AI Tender Summary
Tender Timeline
Feb 07, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 16, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 20, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender