}

Tender For Renovation Of Corridors And Replacement/Rerouting Of Power Cables And Other Ellectrical Fitments Of 5Th To 8Th Floor Block At Mbc Under Ge South West New Delhi, delhi-Delhi

Military Engineer Services-MES has published Tender For Renovation Of Corridors And Replacement/Rerouting Of Power Cables And Other Ellectrical Fitments Of 5Th To 8Th Floor Block At Mbc Under Ge South West New Delhi. Submission Date for this Tender is 08-03-2024. Power Cable Tenders in delhi Delhi. Bidders can get complete Tender details and download the document.




Tender Notice

42136358
Tender For Renovation Of Corridors And Replacement/Rerouting Of Power Cables And Other Ellectrical Fitments Of 5Th To 8Th Floor Block At Mbc Under Ge South West New Delhi
Limitted
Indian
Delhi
delhi
08-03-2024

Tender Details

Renovation Of Corridors And Replacement / Rerouting Of Power Cables And Other Ellectrical Fitments Of 5Th To 8Th Floor Block At Mbc Under Ge South West New Delhi => Limited

Key Value

Document Fees
INR 1000 /-
EMD
INR 167500.0 /-
Tender Value
INR 95 Lakhs /-

BOQ Items

Name of Work: RENOVATION OF CORRIDORS AND REPLACEMENT/REROUTING OF POWER CABLES AND OTHER ELLECTRICAL FITMENTS OF 5TH TO 8TH FLOOR BLOCK AT MBCUNDER GE SOUTH WEST NEW DELHI
Sl. No. Item Description
1Demolition of stone slab or tiling of any thickness as in floor/ wall lining /stone cladding/wall tiling etc including backing (screed bed)complete on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.complete all as specified and as directed.
2Demolition of Pre-cast concrete block/brick work built in cement mortar of any description and including PCC Coping, pre-cast concrete article such as drain/MH coveretc anddisposal of all debris out side Mod land completeall as specified and directed.
3M&L for granite work of any type (table rubbed and polished) for wall lining (veneering to wall) 12 mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over & including 15mm thick rendering in cement mortar 1:4 complete all as specified and as directed.
4M&L for Italian marblework (mirrorpolished) for wall lining (veneering to wall) 12 mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of Italian marble over & including 15mm thick rendering in cement mortar 1:4 complete all as specified and as directed. Note:- Colour and shade shall be approved by GE.
5Providing edge moulding to 12-15 mm thick granite /Italian marble stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc.complete all as specified and as directed.
6Taking down cement plaster with any finish, of any description,from concrete, brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed.
7M & L for coloured digital printedfully Vitrified vinyl composite tiles of approved dark shade of size 1800mmX1200mmand 15mm thick, laid over & including 15mm thick chemical adhesive bed in floors /wall with spacers, set and jointed in neat cementpointed in epoxy tile groutto match the shade complete all as specified and as directed. Note:- Colour and shade shall be approved by GE.
8Removal of all debris obtained from srl item No 1.00 and 6.00 here-in-before, upto 20 Km lead outside the cabinet secttt Bldg permises and dumped as per order of Delhi Govt/ Local civic body/ NGT as applicable including loading, dumping and leveling complete all as specified and as directed.
9M & L for Autoclaved aerated lightweight concrete block masonary with 150mm/ 200mm/ 230mm thick AAC blocks in super structure upto 45 m height from ground level with approved block laying polymer modified adhesive mortar complete all as specified. and as directed.
10M & L for 15 mm thick rendering on any face of brick wall or concrete surface in cement mortar (1:6)finished fair & even without using extra cement etc complete all as specified and as directed.
11M & L for 10 mm thick rendering in cement mortar 1:3 on ceiling surface in cement mortar (1:3)finished fair & even without using extra cement etc complete all as specified and as directed.
12S&F for GI metal false ceiling as in repair lay in plain regular edge white color tiles of size 595X595X0.5mm thick with 8mm drop made of GI sheet having galvanizing of min 120 gms/sqm (both side inclusive ) & electro statically polyester powder coated of thickness 60 microns(min) including factory painted after bending ceiling grid shall be following min sizes:main T section (24X38X0.3mm 3m long), Cross T section (24X25X0.3mm 6m long), wall angle (24X24X0.3mm 3m long),hanger rod4mm dia,Adjust clip (85X30X0.8mm), soffit cleat (27X37X25X1.6mm), Dash fastener (12.5 mm dia)including dismantling of frame / grid work & ceiling board any type, size & position etc complete all as specified and as directed.
13M&L for preparation of new plastered surfaces of wall and applying two coats of plastic emulsion paint over a coat of alkali resistant primer over and including 3mm thick wall care birla putty & sand papering etc complete all as specified and as directed.
14M&L for complete removal of existing treatment from old plastered wall surfacesand applying two coats of plastic emulsion paint over a coat of alkali resistant primer over and including 3mm thick wall care birla putty & sand papering etc complete all as specified and as directed.
15M&L for preparation of new plastered surfaces of ceiling and applying two coats of Oil Bound Distemper over a coat of alkali resistant primer over and including 3mm thick wall care birla putty & sand papering etc complete all as specified and as directed.
16M&L for two coats of synthetic enamel paint over old platered surface after necessary preparation of surfaces of any description over 10cm girth or width, not otherwise described complete all as specified and as directed.
17M&L for scraping and cleaning of wooden doors / wall panelling to remove existing polish, filling putty or the required hardeners for repairing of any wooden marks, scratches or scars and treated with putty /primer to obtained similar texture and then applying mallamine coating on the surface with approved shade on the surfaces of doors/panelling to obtain smooth and uniform finish complete all as specified and as directed.
18S&F 12 mm thick toughened glass door openable/sliding exc 1.5 Sqm each, edges with diamond cut including fitting such asfloor door springs/sliding arrangement fittings , SS pivot, best stainless steel 450mm long handle,etcwithsolar film, acidetching & logo (as approved), PVC sealing as in doors with & including lock etc complete all as specified and as directed.
19Providing & fixing false ceiling at all height including providing & fixing of frame work made of special section , power pressed from MS sheets & galvanised with Zinc coating of 120 gms per sqm ( both side inclusive) as per IS : 277 & consisting of angle cleats of size 25mm widex1.6mm thick with flanges of 27mm & 37mm, at 1200mm c/c, one flange fixed to the ceiling with dash fastener12.5mm dia x50mm long with6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50mm of required lenth with nuts & bolts of required size & other end of angle hanger fixed with intermediate GI chanels 45x15x0.90mm running at the spacing of 1200mm c/c, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26mm each having lips of 10.5mm, at 450mm c/c, shall be fixed in a direction perpendicular to GI intermediate chanel with connecting clips made out of 2.64mm dia x 230mm long GI wire at every junction, including fixing perimeter chanels 0.50mm thick 27mm high having flanges of 20mm & 30mm long , the perimeter of ceiling fixed to wall/partiations with the help of Rawl plugs at 450mm centre, with 25mm long dry wall screws @230mm interval, including fixing of 8mm thick calcium silicate board made with calcareous & ciliceous materials reinforced with cellulose fiber manufactured through auto claving process to ceiling section and perimeter chanels with the help of dry wall screws of size 3.5x25mm at 230mm c/c, including jointing & finishing to a flush finish of tappered & square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compounds in three layers covering up to 150mm on both sides of joints & two coats of primer suitable for boards andapplying two coats of plastic emulsion paint all as per manufacture;s specifications & also including the cost of making opening for light fittings, grills, difusers, cutouts,made with frame of perimeters chanels suitably fixed, all complete as per drawings, specifications complete all as specified and as directed.
20M&L in replacement of old AL point wiring with 1.5 Sqmm, single core, multistranded FRLS Copper conductor PVC insulated Cable 1100 Volts grade including chisiling/groove cutting in any type of wall for Modular switches and drawn through concealed conduit and including rigid non-metalic of suitable size of PVC conduit, including GI sunken box, modular cover plate/face plate as per site requirement and including 1.5 sqmm size PVC insulated FRLS Copper earth continuity conductor to common earth dolly for one light/fan point controlled by one switch 5 Amps one way single pole including making good to the disturbed surfces and match with existing surfaces complete all as specified and as directed.
21All as per srl item No. 20.00 here-in-before but three pin 5 Amps socket out let on independent board complete all as specified and as directed.
22All as per srl item No. 20.00 here-in-before but three pin 5 Amps socket out let on same board board complete all as specified and as directed.
23All as per srl item No. 20.00 here-in-before but point wiring with 2.5 Sqmm single core FRLS PVC insulated cables and earth continuity wire with 2.5 Sqmm single core cable for one 3 pin 15 Amps sockets outlet point on independent board complete all as specified and as directed.
24S & F in replacement of socket modular type 16 A, 2/3 pin, 2 Module, 230 Volts complete all as specified and as directed.
25S & F in replacement of socket modular type 6 A, 2/3 pin, 2 Module, 230 Volts complete all as specified and as directed.
26S & F in replacement of switch modular type 6 A, 230 Volts one way single Module complete all as specified and as directed.
27S & F in replacement of switch modular type 16 A, 230 Volts one way single Module complete all as specified and as directed.
28M & L in replacement of old sub main wiring with 2 x 1.5 Sqmm, single core, multistranded Copper conductor FRLS PVC insulated Cable 1100 Volts grade, including suitable size of PVC conduit recessed in any type of walls by cutting /chizling including making good the disturbed surfces with existing one or and clamped on surface at RCC portions etc including 1.5 Sqmm size PVC insulated unsheated copper earth continuity conductor FRLS to common earth and connecting to earth dolly for AC/Power point including drilling holes etc complete all as specified and as directed. Note:- Two run of 1.5 sqmm cable and one run of 1.5 sqmm earth wire alongwith PVC conduit shall be measured and paid as one unit.
29M & L in replacement of old sub main wiring with 2 x 2.5 Sqmm, single core, multistranded Copper conductor FRLS PVC insulated Cable 1100 Volts grade, including suitable size of PVC conduit recessed in any type of walls by cutting /chizling including making good the disturbed surfces with existing one or and clamped on surface at RCC portions etc including 2.5 Sqmm size PVC insulated unsheated copper earth continuity conductor FRLS to common earth and connecting to earth dolly for AC/Power point including drilling holes etc complete all as specified and as directed. Note:- Two run of 2.5 sqmm cable and one run of 2.5 sqmm earth wire alongwith PVC conduit shall be measured and paid as one unit.
30M & L in replacement of old sub main wiring with 2 x 4 Sqmm, single core, multistranded copper conductor FRLS PVC insulated and sheathed cable 1100 Volts grade, including suitable size of PVC conduit recessed in any type of walls by cutting /chizling including making good the disturbed surfces with existing one or and clamped on surface at RCC portions etc including 4 Sqmm size PVC insulated unsheated copper earth continuity conductor FRLS to common earth and connecting to earth dolly for AC/Power point including drilling holes etc complete all as specified and as directed. Note:- Two run of 4.0 sqmm cable and one run of 4.0 sqmm earth wire alongwith PVC conduit shall be measured and paid as one unit.
31M & L in replacement of Old Sub Main wiring with 2 x 6 Sqmm, single core, multistranded copper conductor FRLS PVC insulated and sheathed cable 1100 Volts grade, including suitable size of PVC conduit recessed in any type of walls by cutting /chizling including making good the disturbed surfces with existing one or and clamped on surface at RCC portions etc including 6 Sqmm size PVC insulated unsheated copper earth continuity conductor FRLS to common earth and connecting to earth dolly for AC/Power point including drilling holes etc complete all as specified and as directed. Note:- Two run of 6.0 sqmm cable and one run of 6.0 sqmm earth wire alongwith PVC conduit shall be measured and paid as one unit.
32M & L in replacement of Old Sub Main wiring with 4 x 10 Sqmm, single core, multistranded copper conductor FRLS PVC insulated and sheathed cable 1100 Volts grade, including suitable size of PVC conduit recessed in any type of walls by cutting /chizling including make good the disturbed surfces with existing one or and clamped on surface at RCC portions etc including 10 Sqmm size PVC insulated unsheated copper earth continuity conductor FRLS to common earth and connecting to earth dolly for AC/Power point including drilling holes etc complete all as specified and as directed. Note:- Two run of 10.0 sqmm cable and one run of 10.0 sqmm earth wire alongwith PVC conduit shall be measured and paid as one unit.
33S & F of new energy efficient LED light fitting, round shape, 12 Watt recess mounted downlighter warm white EASH technology with white powder coated aluminium housing with integrated electronic driver complete fixed on ceiling, complete all as specified and as directed.
34S & F of new LED Flexi strip, 10 W, 12 V with optimum brightness & uniformity of light for perfect cove lighting with intigrated electronic driver or male /female Plug & socket or connector etc as required according to site complete fixed on ceiling, all as specified and directed.complete all as specified and as directed.
35S & F of new triangular aluminium profile to fixing LED strip light with PC profile cove of size 25x25mm alongwith all other standard accessories complete all as specified and as directed.
36Supply & fixing in replacement PVC non-metallic conduit of 20 mm dia for repair/relay of existing LAN Cable, telephone cable and other connected wiring with including of all standard accessories i.e tees, bends, junction box 4 way, elbow, reducers, bell mouth tube end and fixing accessories such as coupler, lock, nut, saddles, pipe hooks etccomplete all as specified and as directed.
37S & F of New wire mesh Cable Tray Electro Zinc (EZ) Hot Dipped Galvanized size 105 (h) X 400 (w) mm, manufactured from steel wires welded together with coupler and longitudinal "T" welded safety edge including all standard wall/RCC Roof mounting accessories e.g. mounting Bracket or supports (Horizontal & Vertical Both), bends, Fastners, kitastar, nut, bolts and washers etc and fixed in roof/ RCC slab with the suitable length of fastners at a suitable intervals according to site requirement complete all as specified and directed.Make -Legrand (Product Code 000931)/L&T/ABB
38S & F in replacement of MCB SP 240 Volts, 20 to 32 Amps Complete all as specified and directed.
39S & F in replacement of MCB SP 240 Volts, 40 to 63 Amps Complete all as specified and directed.
40Relaying /Re-routing of existing serviceable LAN Cable, telephone Cable and other connected wiring on newly fixed cable tray and tied up wit PVC Sleeve without disturbing walls/connections complete all as specified and directed.
41S & F in replacement LED Recess Mounted 2 x 2 feet Luminaries fittings LED, 36 Watt, White/Worm White, cast Aluminium housing, toughened glass, Silicon gasket, high power LED with lens for uniform distribution, pre-wired and electric connection with suitable size stranded copper flexible PVC insulated wire including clamps and nut & bolts for fixing complete all as specified and directed.
42S & F in replacement of Detectors Complying with and type certified to EN-45 Addressible type smoke detector Photoelectric /Optical wirh base with self built intelligence and PVC base box type complete all as specified and directed.
43All as per item No. 42.00 here-in-before but addressible type multisensor detector with heat and smoke combination complete all as specified and directed.
44M&L for taking down heat/smoke detector carefully from roof ceiling of corridoor and keep at safe place for reuse /re-fixing at same place on new ceiling including termination accoriding to previous /existing system complete all as specified and directed.
45Supply and Fixing in replacement of 1.5 Sqmm 2 Core, fire survival armoured copper conductor cable complete all as specified and directed.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail