Military Engineer Services-MES has published Tender For Certain Repair To Flooring, Plumbing And Misc B/R Work For Jcos/Or Md Accn Under The Area Of Age B/R-I Of Ge (Army) No.1 Jodhpur.. Submission Date for this Tender is 08-03-2024. Plumbing and Sanitary Work Tenders in jodhpur Rajasthan. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 01-Mar-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 08-03-2024 |
| Sl. No. | Item Description |
| 1 | Demolition Concrete(un reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 2 | M&L for 15mm thick rendering in cement mortar 1:3 using WPC @ 3% by weight of cement or as per manufacturers instruction complete all as specified and as directed. Note : WPC shall be measured and paid seperately. |
| 3 | Supply only water proofing compound, complete all as specified and as directed. |
| 4 | M&L for 75mm thick plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregates to use in subbase of floors of sunken portionlaid in slope 1:40 to the surface of RCC slab shall be made even and smooth without using extra cement when concrete is still green complete all as directed by the Engr- in -charge. |
| 5 | M&L for applying one coat of cold emulsion bitumenous primer @ .25kg/sqm shall applied on plastered surface including side walls. There after a layer of APP membrane 1.5mm thick as specified above shall be laid by torch application methodas per manufacturer instructions |
| 6 | M&L for PCC (1:5:10) lean cement concrete type E2 using 40mm graded stone aggregates in mass concrete after carrying out satisfactorly testing of CI pipes/PVC pipes joints and slab walls by filling water for 72 hrs,sunken portion of nahani trap/floor trap and pipe joints shall be embeded in PCC 1:3:6 type C1 complete all as specified and directed.. |
| 7 | S&F 32 mm dia bore light grade galvenised steel water tubing provided 30cm beyond wall surface to drain out leakage if any. The mouth of GI pipe shall have Gravel to avoided chocking. The top of sunken portion of RCC slab to be finished such that its slope towards spout. |
| 8 | Demolition of cement concrete (unreinforced)in ground floors and pavings not exc 15 cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance out side MD land complete all as specified and as directed. |
| 9 | M&L PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in flooring,path , sub foundation etc complete all as specified and directed. |
| 10 | M&L 40 mm thick PCC 1:2:4 type B1 using 20mm graded crushed stone aggregateas in flooring/hard standing laid in alternative bays usingglass dividing strips including finishing cement concrete surface even and smooth without using extra cement complete all as specified & as directed. |
| 11 | M&L 50 mm thick PCC 1:3:6type C1 using 20 mm graded stone aggregate laid in alternative bays as in plinth protection including finishing the surface even & fair & filling the joints with mastic filling i.e one part of bitumen 85/25 and 3 parts of sand by weight in 2 mtr interval,complete all as specified and directed. |
| 12 | Supply and layingmachine pressed / factory made chamfered edge cement concrete rubberised interlocking paver block, 60mm thick with 6 mm thick top layersof anti abrasive material of M-35 grade with any description, ( colour, design & pattern, & size/ shape, as approved by GE) as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thicknessmade by table vibratory method using PU mould, laid in required colour & pattern over and including M&L 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed. |
| 13 | Supply and laying machine / factory made kerb stone of M-25 grade,at or near ground level, cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required, complete all as specified and directed. |
| 14 | Demolition ofstone slabs and tiles of any description or thickness in floors,aprons/wall etc.laid, bedded and pointed in any mortar complete all as specified and directed. |
| 15 | M&Lfor 25 mm thick cement concrete 1:2:4, type B-0 (using 12.50 mm graded crushed stone aggregate), to receive floor finishes, complete all as specified & directed. |
| 16 | M&L for joint free non skid ceramic coloured tiles (premium quality) of size 6 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm (size & shape, shade and pattern as approved by GE), as infloors etc set and jointed in neat cementslurry and pointed in white or coloured cementto match the colour of tiles over and including M&L 15mm thick screed bed or bedding layer in CM 1:4complete all as specified and directed. |
| 17 | M&L forglazed colour ceramic tiles (premium quality) of size 300X450X6-7 mm, as in vertical surface such as i.e. dado/skirtingetc, set and jointed in neat cement slurry and pointed in white or colouredcement to match the shade of tiles,over & including M&L 10mm thick backing coat in CM (1:3)complete all as specified and directed. |
| 18 | All as per item No. 16.00 here-in-above, but area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm |
| 19 | All as per item No. 18.00 here-in-above, but as in skirting/dado with 10mm thick backing coat in CM 1:4 |
| 20 | All as per item No. 16.00 here-in-above, but area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm |
| 21 | All as per item No. 20.00 here-in-above, but as in skirting/dado with 10mm thick backing coat in CM 1:4 |
| 22 | M&L for machine cut kota stone slab 20 to 25mm thick in floor laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 20mm thick screed bed in CM 1:6 including dismantling of stone slabs of any description complete all as specified and as directed. |
| 23 | All as per item No. 22.00 here-in-above, but as in skirting , risers of steps & other vertical surfaces etcincluding 10mm thick rendering in CM 1:4 as backing coat complete all as specified and directed. |
| 24 | M&L for 15 to 18 mm thick udaipur green stone slab, as in cooking plateform/ WHB counter top, machine cut, (table rubbed and polished) best quality as per sample, including &over 20 mm thick screeding in CM1:3 including rounding & double mouldlng with jointless finish of the edges, including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.providing suitabledia hole in the slab for the gas pipe, complete all as specified and as directed. |
| 25 | Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified. |
| 26 | M&L for rolled mild steel confiRMing Fe-290 (Gde E-165) in door or gates of angle (35x35x5 mm) or other section with gusset plate, rail braces etc complete drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel, sheeting or other covering ) and hanging also fastening and fixingcomplete all as specified and as directed. |
| 27 | Demolition of stone slabs laid dry jointed & pointed as in shelves, sunshades etc., complete all as specified and as directed. |
| 28 | S&F 5 cm thick sand stone slabs Jodhpur pattern/colour in sun-shades, chajjas, shelves, cills, landings, cover stones, templates, etc not exceeding 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in cement mortar (1:4) complete all as specified & directed |
| 29 | M & L for mild steel framed work as in brackets etc., for cooler stands /steps/stairs etc., supporting frame work to sunshade,with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc., n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under "Structural Steel"), complete all as specified and as directed. |
| 30 | Taking down cement plaster of any description on brick wall or stone masonary or concrete orRCC surfaces, dado surfaces etc completeincl racking out joints, hacking for key scrubbing down with water complete all as specified and directed. |
| 31 | M&L for 15 mm thick rendering in CM 1:6on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing finished surface even and smooth without using extra cement, complete all as specified and as directed. |
| 32 | M&L for 10 mm thick Rendering in CM 1:3 on fair faces of brick work or conc surfaces as in ceilings/chajja/facia & finished even & smooth w/o using extra cement, complete all as specified and as directed. |
| 33 | M&L 15 mm thick rendering in cement mortar 1:4 on fair faces of stone or brick work or concrete surfaces mixed with water proofing compound as per manufacturer instructions andfinished the surfaces even and smooth with out using extra cement complete all as specified and as directed. Note :- WPC will be measured and paid seperately. |
| 34 | S&F wire netting galvanised steel wire cloth 0.91 nominal dia and 12 mm mesh lathing and fixed to ceiling including all gaps cutting and waste fixed with nails on ceiling complete all as specified and directed. |
| 35 | M&L for Preparation ofnew plastered or unplastered surfaces of wall and applying three coats of white wash on wall surfaces complete all as specified and as directed. |
| 36 | M&L for Preparation ofnew plastered or unplastered surfaces of ceiling and applying three coats of white wash on ceiling surfaces complete all as specified and as directed. |
| 37 | M&L for preparing new plastered or old plastered wall surfacesand applying2 coat wall care putty including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying two coats of oil bound distemper on walls, complete all as specified and directed. Note -i)- Rate are deemed to be included for scaffolding, trestles, ladders, cradles, etc. necessary for execution of work and protective measures. ii)- OBD shall be in one or more colours/ shades all as approved by GE. |
| 38 | M&L for preparation of old decorated wall surfaces,plastered or unplastered, by brooming down or steel wire brushing, scrapping down moulds, moss and efflorescent salts and trading oil & greasy spots,including cornices etc andapplying one coat of white wash on wall, complete all as specified and directed. |
| 39 | M&L for preparation of old decorated wall surfaces,plastered or unplastered, by brooming down or steel wire brushing, scrapping down moulds, moss and efflorescent salts and trading oil & greasy spots,including cornices etc andapplying one coat of oil bound distemper on wall, complete all as specified and directed. |
| 40 | Demolition of stone / boulder masonry walling, built in cement mortarincluding all quoins, arches, pillars etc and removal unserviceable materials, debris, rubbish to out side MD land complete all as specified and directed. |
| 41 | M&L for squared rubble walling, Jodhpur type, regular coursed well bonded ,bedded and solidly hearted built in cement mortar 1:6, complete all as specified and directed. |
| 42 | All as per item No. 41.00 here-in-above, but except stone |
| 43 | Extra over stone walling for hammer dressingto face stone & dressing of face beds & joints as specified of squared rubble walling Jodhpur type brought upto courses with maximum depression of face from straight edge held against the dressed surface n exc 20mm and dressing face beds and joints, complete all as specified and directed. |
| 44 | S & F in replacement white vitreous china squatting pan "Orissa pattern" of size 580 mm X 440 mmwith integral foot rests and PVC "P" or "S" trap, including M&L brackets, flush HDPE pipe of 32 mm dia and PVC connection 15mm size, 450 mm long with PTMT nuts & fixing arrangement of cistern, includingprovision of cement concrete bedding 1:5:10 type E2 complete all as specified and as directed. |
| 45 | S&F in replacementvitreous ware wash down anglo-Indian type water closet [Semi-Pedestal Pattern], white [ETWC]including plastic water closet seat back soft closed pattern with flat bottom and cover & jet spray and mild steel chromium plated or aluminium hinging device and "P" or "S" trap connecting to drain pipe and flushing pipe etc., complete all as specified and directed. |
| 46 | S & F forvitreous china ware wash hand basin, white, flat back of size 300 mm X 450 mm including 32 mm dia brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, 32mm bore PVC flexible waste pipe,PVC connection15mm size with PTMT nuts of length 300mm long complete all as specified and as directed. |
| 47 | All as per item No. 46.00 here-in-above, but size 550x400 mm |
| 48 | S & F in repairs stainless steel kitchen sink without drainage board, made of stainless steel 1 mm thick, with plugs, washers and waste pipe, including bedding in cement mortar to dwarf wall or including fixing cantileverbrackets and connecting union to waste pipe, over all size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and as directed. |
| 49 | S & F in repair stainless steel kitchen sink with drainage board, made of stainless steel 1 mm thick, with plugs, washers and waste pipe, including bedding in cement mortar to dwarf wall or including fixing cantileverbrackets and connecting union to waste pipe, over all size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and as directed. |
| 50 | S&F in repairs 10 ltrs capacity PVC valve less, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, flush pipe of 32 mm dia and PVC connection 15mm size, 450 mm long with PTMT nuts complete all as specified and as directed. |
| 51 | Replacement of internal flushing cistern kit fitting (accessories kit) for low level. Make as per existing fitting all as specified and as directed. |
| 52 | S&F of PVC (SWR) floor trap, plain with grating including jointing with solvent cementfor 75 mm bore pipes ,complete all as specified and directed. |
| 53 | S&F PVC connections 15mm size with PTMT nuts of length 450mm, complete all as specified and directed. |
| 54 | S & F in repairs fancy type chromium plated Bib tap, cast copper alloy, 15 mm dia, with crutch or butterfly handle, screwed down for iron pipe etc complete all as specified and as directed. |
| 55 | S & F in repairs fancy type chromium plated Bib tap, cast copper alloy, 15 mm dia, with long Arm, crutch or butterfly handle, screwed down for iron pipe etc complete all as specified and as directed. |
| 56 | S & F in repairs, stop valves, 15 mm dia, cast copper alloy , screwed down high pressure with crutch or butterfly handle screwed both endsfor iron pipe etc complete all as specified and as directed. |
| 57 | S&F as in repairs of stop valves, cast copper alloy withscrew down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union & fixed of 20 mm dia all as specifiedspecified. |
| 58 | S&F as in repairs of stop cockregular body withadujstable wall flange with fancy type chromium platedwith (concealed type) 15mm dia for iron pipe etc complete all as specified and as directed. |
| 59 | S & F in repairs angle cock, 15 mm dia, brass, screwed down high pressure with crutch or butterfly handle screwed both endsfor iron pipe etc complete all as specified and as directed. |
| 60 | S&F fancy typePillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered "Hot" or "Cold" with long screwed shanks and fly-nuts, screwed for iron pipe of 15mm dia bore. |
| 61 | S & F in repair CP Wall mixer with regular spout with out popup waste system with 450mm long braided hose with connecting legs and wall flanges complete all as specified and as directed. |
| 62 | S&Fin repair15mm bore CPbrass,sink mixture pop up waste system with 450 mm long copper pipe and brass nuts ISI Marked sitable for over head counter, complete all as specified and directed. |
| 63 | S&F onlyPVC Flexible waste pipe 32 mm to 40 mm dia with socket for steel sink/WHB upto floor level and length not less than 0.85 Mtr, complete all as specified and directed. |
| 64 | S&F in repairstwo way way angle bibcockchromium plated brassbody, (Nickel 10 microns and chrome 0.3 microns) fancy type 15 mm bore /size, complete all as specified and directed. |
| 65 | S&Fshelf of PTMT fixed with and including chromium plated brass screws and wooden cleats ( minium weight 300 gram, size 450x125x25mm) complete all as specified and directed. |
| 66 | S&F in repair health faucet with 1200 mm long flexibletube with wall hook and chromium plated two way angle valve/CP brass tap complete all as specified and as directed and approved by Engr-in-charge. |
| 67 | S&F in repairs plastic water closet seat coverwhite closed patteren with flat bottam and cover and mild steel chromium plated or aluminised hinges device PVC seat cover for water closet, complete all as specified and directed. |
| 68 | S&F of CP mild steel grating with or without hole 125 mm dia as in repairs, complete all as specified and directed. |
| 69 | S&F in repairsof chromium plated Swivel joint shower rose of 100 mm dia fixing with 15mm pipe. (Minimum weight 40gms)withShower arm 15 mm size, 195mm long with bend of 45degree with flange, complete all as specified and directed. |
| 70 | S&F 600mmx450mm bevelled edge mirror of selected qualityglass, mounted on 6mm thick AC building board or commercialplywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 71 | S&F in repairs PVC Cabinet mirror of size ( 355mmx 455mm ) of selected quality glass and fixed to plugs with chromium plated brass screws and cup washers complete all as specified. Make prayag or polytuf |
| 72 | S&F in repairs for Kitchen plate Rackmade out of stainless steel 0.50 mm thick size 750x600x200 mm with partition complete all as specified. |
| 73 | S&F in replacement rotational moulded polythene water storage tanks of 500 ltrs capacity, white three layered (ISI marked) (Cylinderically vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I with PTMT ball valve heigh pressure with epoxy coated aluminium rod and high density plastic ball suitable for 20mm bore pipe weight not less than 210gms including dismantling old RCC tanks or remove to store or credit to contractor, complete all as specified and directed. |
| 74 | S&F in replacement rotational moulded polythene water storage tanks of 500 ltrs capacity, white three layered (ISI marked) (Cylinderically vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I with PTMT ball valve heigh pressure with epoxy coated aluminium rod and high density plastic ball suitable for 20mm bore pipe weight not less than 210gms including dismantling old tanks or remove to store or credit to contractor, complete all as specified and directed. |
| 75 | S&F in replacement rotational moulded polythene water storage tanks of 1000 ltrs capacity, white three layered (ISI marked) (Cylinderically vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I with PTMT ball valve heigh pressure with epoxy coated aluminium rod and high density plastic ball suitable for 20mm bore pipe weight not less than 210gms including dismantling old tanks or remove to store or credit to contractor, complete all as specified and directed. |
| 76 | S & F ball valves20mm dia borehigh pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimumweight20mm-210gms . |
| 77 | M&L for Dismantling & refixing, cleaning and removing all scale dirt etc., from mouths of circulating pipes of water tanks of capacity exceeding 250 litres and not exceeding 500 litres complete all as specified and as directed. Note :- Accessories damaged during the cleaning of tank shall be replaced by the contractor at his own arrangement and will not be paid by the department. |
| 78 | M&L for Dismantling & refixing, cleaning and removing all scale dirt etc., from mouths of circulating pipes of water tanks of capacity exceeding 500 litres and not exceeding 1000 litres complete all as specified and as directed. Note :- Accessories damaged during the cleaning of tank shall be replaced by the contractor at his own arrangement and will not be paid by the department. |
| 79 | Demolition ofexisting water proofing Treatment including PCC padding etcand cleaning roof surface etc preparing the surface to receive plaster /PCCby brushing with wire brush and fanning the surface to remove all loose dirt etc . |
| 80 | Material and labour for providing cement concrete (1:2:4) type BO using 12.5mm graded crushed stone aggregate as over roof for making good depression/undulation to make the existing as filling in depression of roof slab complete all as specified and directed. |
| 81 | M&L for PCC 1 : 2 : 4 type B0 using 12.5mm graded stone aggregate as in roof kerbincluding weathering, slightly rounded or chamfered angles and throating, as directed etc |
| 82 | M&L forneat cement slurry @ 3.00 kg/Sqm and screeding / bedding layer of 10 mm thickin CM 1:3 mixed with water proofing compound as per manufacturer instructions over theRCC roof slab for laying of water proofing treatmentincluding providing the following as roof treatment complete all as specified andas directed : - (a)FIRST COURSE: Applying a coat of bituminous primer @ 0.4 litre / Sqm manufactured by the same agency that of APP with a density 0.87 to 0.89 Kg/litre at 25 degree celsius on prepared plastered surfaces. (b) SECOND COURSE: Applying one coat of bonding material using blown type bitumen conforming to IS-702 grade 85/25 @ 1.20 Kg/Sqm (c) THIRD COURSE : Provide a layer of APP modified polymeric membrane centre core of 100mm micron HMHDPE, outer film 20 micron each, thickness 3.00mm having weight not less than 3.00 Kg/Sqm, mineral gravel finish on top, using torch application method with minimum 10cm side lap and 15cm end lap complete . (d) FOURTH COURSE : Applying one coat of bonding material using blown type bitumen conforming to IS- 702 grade 85/25 @ 1.20 Kg/Sqm. (e) FIFTH COURSE : 40 mm thick plain cement concrete 1:2:4 (using 20 mm stone crushed aggregate) as in roof padding, including WPC as per manufacturer instruction. NOTE :- 1. A Information Tablet will be put up in the front side wall of the buildings where thiswork will be done. All building/structure shall be provided with plaque (tablet) furnishing the information as per PS clause, in plaster engraving in and painted as directed by GE 2.WPC shall be measured and paid separately under respective item. |
| 83 | Hacking out old broken glass (any thickness, size, quality or description) from metal frame incld punching or drilling out old glazing pins/ spring clips and provding and fixing new ones, complete all as specified and as directed. |
| 84 | S&F Sheet glass 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq.m in each pane complete all as specified and directed. |
| 85 | S&F 4 mm thick pin headed figured glassin small widths as in louvers of ventilators complete all as directed. |
| 86 | S&F glavanised steel wire cloth, 0.56mm nominal dia of wire and average width of aparture 1.00mm and fixed with tinned tack or galvanised wire stapples complete all as specified and as directed. |
| 87 | S&F in repairs for galvanised mild steel wire cloth, 0.40 mm nominal dia of wire and 1.20 mm average width of aperature fixed with and including palin MS flat iron with galvanised wire stapples with andincluding necessary welding, nut boltetcas in steelwindow or door completeall as specified and directed. |
| 88 | Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 110mm bore as directed |
| 89 | Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 75mm bore as directed |
| 90 | Supply & laying 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall with MS clamp of suitable size complete all as specified and as directed . |
| 91 | Supply & laying 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laidin trenches or floor of suitable size complete all as specified and as directed . |
| 92 | Supply & laying 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laidin trenches or floor of suitable size complete all as specified and as directed . |
| 93 | Supply & laying 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall with MS clamp of suitable size complete all as specified and as directed . |
| 94 | S & F 110 mm bore PVC [SWR] branch piece, single [single "Y"] equal or unequalcomplete all as specified and as directed. |
| 95 | S&F 110 mm bore (SWR)PVC bends any radius with oval access door complete all as specified and directed. |
| 96 | S&F 75 mm bore (SWR)PVC bends any radius with oval access door complete all as specified and directed. |
| 97 | S&F of PVC (SWR) 110mm borevent cowlcomplete all as specified and directed. |
| 98 | S&F of PVC (SWR) 75mm borevent cowlcomplete all as specified and directed. |
| 99 | S&F 75 mm PVC SWR junction (T) withacces door equal or unequal complete all as specified. |
| 100 | S&F 110mm PVC SWR junction (T) withacces door equal or unequal complete all as specified. |
| 101 | M &L in repairsfor fabrication of pressed steel cupboard shutters,using 1.00 mm thick MS plain sheet & frame 1.25 MM thick, bent to shape, including applying two coats of syntheticenamel paint on tint surfaces over &including M&L for two coats of hammer tone finish on external surfaces alongwith locking arrangement mortice lock handle etc complete all specified and directed. |
| 102 | M&L precast cement concrete block masonry using PCC 1:2:4, type B-1 solid blocks, exceeding 10 cm in width and setting in cement mortar 1:4, straight or curved on plan exceeding 6 m mean radius complete all as specified and directed. |
| 103 | Taking up or down 25mm bore steel tubing and connections including cleaning for refixing or credited to contractor complete all as specified and directed. |
| 104 | All as per item No 103.00 here-in-above,but size of pipe 20 mm bore. |
| 105 | All as per item No 103.00 here-in-above,but size of pipe 15 mm bore. |
| 106 | S&F of water GI tubing medium grade, galvanized, with all fittings fixed to wall, ceilings or laid n floors, complete all as specified and as directed. (a) 25 mm bore, |
| 107 | All as per item No 106.00 here-in-above,but size of pipe 20 mm bore. |
| 108 | All as per item No 106.00 here-in-above,but size of pipe 15 mm bore including cutting chases, pinning in & making good to disturbed portion to match the existing surface etc., complete all as specified and as directed. |
| 109 | S&F in replacement 15/20 mm bore gun metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe, complete complete all as specified and directed. |
| 110 | Racking out joints/ pointing to squared rubble or polygonal rubble un-coursed or brought up to courses masonry built in cement mortar or cement lime mortar, coursed or un-coursed in walls not less than 12mm deep, washing the joints, removing rubbish off the premises and keeping the surface to pointed or plastered wet for two days prior to re-pointing or plastering complete all as specified & directed. |
| 111 | M&L keyed pointing in cement mortar (1:3) to squared rubble masonryregular coursedor un coursed complete all as specified & directed. |
| 112 | NOTE:- (i)-The contract sum shall be arrived at after duducting amount of schedule of "Credit" from the Total quoted amount |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
