Gorkhaland Territorial Administration-GTA has published Tender For Footpath With Railing Work At Sikari Tar Tourism Camp Dalapchand Under 15Th Sfc Within Nimbong Gp. Submission Date for this Tender is 16-02-2024. Footpath Work Tenders in Kalimpong West Bengal. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | PWD(WB)/BUILDING WORKS(CCS)/Page-1/Item-2Earth work in excavation of foundation trenches or drains in all sorts of soil (including mixed soil but excluding laterite or sand stone) including removing, spreading or stacking the spoils within a lead of 75m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. .(a) Depth of excavation not exceeding 1.500 mm. |
| 2 | PWD(WB)/BUILDING WORKS(CCS)/Page-229/Item-12Laying 150 mm. to 200 mm. boulder soling including rough dressing hand packing and ramming down small pieces in the interstics without rolling but including ramming. |
| 3 | PWD(WB)/BUILDING WORKS(CCS)/Page-229/Item-11ACost of stone boulder 150 mm size delivered ans stacked at site. |
| 4 | PWD(WB)/BUILDING WORKS(CCS)/Page-34/Item-22II(II) Cement concrete with 30 mm. down graded shingles excluding shuttering.N.B. VarietyIn ground floor .(a) 1:3:6 proportion. |
| 5 | PWD(WB)/BUILDING WORKS(CCS)/Page-24/Item-5Controlled Cement concretewith well graded stone chips (20 mm nominal size ) excluding shuttering and reinforcement with complete design of concrete as per ISI-456 and relevant special publications submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer-in-charge. Consumption of cement will not be less then 300kg of cement with Super plasticiser per cubic meter of controlled concrete but actual (ii) N.B. Veriety (stone metal).consumption will bedetermined on the basic of preliminary test & job mix formula In Ground floor & foundation.[using concrete mixture]M 20 Grade. |
| 6 | PWD(WB)/BUILDING WORKS(CCS)/Page-42/Item-36Hire and labour charge for shuttering with centreing and necessary staging up to 4 m. using approved stout props and thick hard wood planks of approved thick ness with required bracing for concrete slabs, beams, columns, lintels curved or staight including fitting fixing and striking out after complection of works. (up to roof of ground floor).(a) 25 mm. to 30 mm. thick wooden shuttering as per decision & direction of the Engineer-in-charge. . |
| 7 | PWD(WB)/BUILDING WORKS(CCS)/Page-43/Item-40Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc.initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at inter-section, complete as per drawing and direction.(a) For works in foundation, basement and up to roof of ground floor/up to 4m. Tor steel/Mild steel.other than SAIL/TATA/RINL/JSW/JSPL/Shyam/SRMB/ISSL/BMASL/Electrosteel |
| 8 | PWD(WB)/BUILDING WORKS(CCS)/Page-189/Item-1Plaster ( to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering conrners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (ground floor). [Excluding cost of chipping over concrete surface].(ii) With 1:4 cement mortar .(b) 15 mm. thick plaster. |
| 9 | PWD(WB)/BUILDING WORKS(CCS)/Page-23/Item-45Rubble masonry in cement (1:4) with hard dressed stones from approved quarries and clean, coarse and washed sand including carriage of all materials to siteIn Road and Jhora Work |
| 10 | PWD(WB)/BUILDING WORKS(CCS)/Page-76/Item-2-A(A) M.S. structural works with hollowin roof trusses with tubular sections (TATA make suare or rectangular shape conforming to IS: 806- 1957 & IS: 1161- 1958) connected to one another with bracket,gusset,cleats as per design, drawing & direction of Engineer-In-Charge complete including cutting to requisite size, fabrication with necessary metal arc welding conforming to IS: 816- 1956 & IS: 9595 using electrodes of approved make and brand conforming to IS: 814- 1957, haulage, hoisting and erection all complete. The rate includes the cost of all M.S. Hollow section, all consumables such as electrodes, gas and hire charges of all tools and plants and labour required for execution and all incidental charges (such as electricity, labour insurance) etc. complete.(Payment to be made on the basis of calculated weight of structural members of M.S. Hollow section as specified in relevent IS code in finished work. Payment for gusset, bracket, cleat may be made by adding the actual weight of such items with the weight of finished structural members. The rates are considered for a height of erection 8m./ 2nd. floor leves fromthe ground. Add 1.5% extra over the rate for each additional floor or 4m. beyond initial 8m. or part therof.(i) For roof truss works.(a) Span up to 12 Mtr. |
| 11 | PWD(WB)/BUILDING WORKS(CCS)/Page-197/Item-15Applying decorative cement based paint of approved quality after preparing the surface including scraping the same throughly (plastered or concrete surface) as per manufacturer"s specification. In ground floor.(ii) One coat on new surface. |
| 12 | PWD(WB)/BUILDING WORKS(CCS)/Page-200/Item-2(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sandparpering etc. in cluding using of approved putty etc. on the surface , if necessary.(b) On steel or other metal surface: .(1) With super gloss (hi-gloss).(iv) Two coats (with any shade except white). |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
